Hyun Seo Park
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hyun Seo Park has a total of 272 co-authors. Here are the top co-authors by number of shared publications:
- Sung Jong Yoo
Korea Institute of Science and Technology (KIST)
17 shared publications - Jong Hyun Jang
Center for Hydrogen and Fuel Cells, Korea Institute of Science and Technology (KIST), Seoul, Republic of Korea
16 shared publications - Yung-Eun Sung
Institute for Basic Science (IBS)
16 shared publications Jihyun Choi
13 shared publicationsAhyoun Lim
Center for Hydrogen Fuel Cell Research
11 shared publications- Dirk Henkensmeier
Center for Hydrogen and Fuel Cells, Korea Institute of Science and Technology (KIST), Seoul, Republic of Korea
11 shared publications
Latest Publications
- 20 October 2026
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 404
Facet-engineered Pt electrodes for scalable and stable ammonia electrolysis in multi-cell stack
- 20 October 2026
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 404
Facet-engineered Pt electrodes for scalable and stable ammonia electrolysis in multi-cell stack
- Open Access
- 31 August 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (20) , 19899-19911
Bubble-Induced Current Heterogeneity and Spatially Nonuniform Degradation of OER Electrodes in PEM Water Electrolysis
Understanding bubble-related phenomena during the oxygen evolution reaction (OER) is essential for devising strategies that ensure stable operation in proton exchange membrane water electrolysis, as oxygen bubbles play a critical role in accelerating the degradation of catalytic performance. Specifically, elevated local current densities induced by bubble accumulation at the electrode surface are known to accelerate catalyst over-oxidation and dissolution, leading to irreversible degradation; however, there has been no direct experimental analysis elucidating the relationship between local activity, durability, and bubble shielding. In this study, spatiotemporally resolved scanning electrochemical microscopy (SECM) was employed to elucidate the impact of bubble shielding on the local activity and durability of OER electrodes; (a) SECM analysis revealed that local current density concentrated predominantly at the bubble-free electrode center, reaching values 1.3–1.7 times higher than those in bubble-covered regions. This intensification strongly correlated with accelerated degradation, evidenced by severe local dissolution and a current density decay rate 2.9–3.6 times higher in the bubble-free region compared to the shielded area. (b) This non-uniform current distribution persisted regardless of the interlayer material, though its magnitude varied with the catalyst composition. (c) Further experiments with miniaturized electrodes demonstrated that bubble accumulation could completely occlude the active surface, exacerbating degradation. Collectively, these findings highlight that the non-uniform current distribution induced by bubble shielding plays a decisive role in electrode failure by driving heterogeneous catalyst dissolution. By leveraging SECM to map these localized disparities, this work successfully identifies a degradation mechanism that remains elusive to conventional macroscopic techniques.
- 31 August 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (20) , 19899-19911
Open AccessBubble-Induced Current Heterogeneity and Spatially Nonuniform Degradation of OER Electrodes in PEM Water Electrolysis
Understanding bubble-related phenomena during the oxygen evolution reaction (OER) is essential for devising strategies that ensure stable operation in proton exchange membrane water electrolysis, as oxygen bubbles play a critical role in accelerating the degradation of catalytic performance. Specifically, elevated local current densities induced by bubble accumulation at the electrode surface are known to accelerate catalyst over-oxidation and dissolution, leading to irreversible degradation; however, there has been no direct experimental analysis elucidating the relationship between local activity, durability, and bubble shielding. In this study, spatiotemporally resolved scanning electrochemical microscopy (SECM) was employed to elucidate the impact of bubble shielding on the local activity and durability of OER electrodes; (a) SECM analysis revealed that local current density concentrated predominantly at the bubble-free electrode center, reaching values 1.3–1.7 times higher than those in bubble-covered regions. This intensification strongly correlated with accelerated degradation, evidenced by severe local dissolution and a current density decay rate 2.9–3.6 times higher in the bubble-free region compared to the shielded area. (b) This non-uniform current distribution persisted regardless of the interlayer material, though its magnitude varied with the catalyst composition. (c) Further experiments with miniaturized electrodes demonstrated that bubble accumulation could completely occlude the active surface, exacerbating degradation. Collectively, these findings highlight that the non-uniform current distribution induced by bubble shielding plays a decisive role in electrode failure by driving heterogeneous catalyst dissolution. By leveraging SECM to map these localized disparities, this work successfully identifies a degradation mechanism that remains elusive to conventional macroscopic techniques.
- 23 July 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (36)
Direct Hydrogen Storage From Water to Diphenylmethane via Liquid Organic Hydrogen Carrier Electrochemical Hydrogenation System
This study presents a novel electrochemical hydrogenation (EH‐DPM) system that integrates clean hydrogen production and storage by utilizing a diphenylmethane (H0‐DPM, DPM) /dicyclohexylmethane (H12‐DPM, DCM) pair as a liquid organic hydrogen carrier (LOHC). The system operates in a full‐cell configuration, coupling a cathode for the electrochemical hydrogenation of H0‐DPM (EH‐DPM) with a proton exchange membrane water electrolyzer (PEMWE) anode, thereby enabling direct hydrogen storage in the LOHC during water splitting. The EH‐DPM system demonstrates higher energy efficiency than conventional PEMWE, achieving reaction currents at lower potentials. A comparative testing of Pt and Ru black electrocatalysts reveals that Ru black outperforms Pt black at higher voltages (> 1.5 V), achieving significantly higher selectivity (92.3% at 1.6 V) for the fully hydrogenated H12‐DPM. 1 H‐NMR and 13 C‐NMR analyses identifies cyclohexylmethylbenzene (H6‐DPM, CMB) as the sole hydrogenation intermediate, highlighting that optimal electrocatalyst selection is crucial for maximizing H12‐DPM yield and minimizing energy losses from intermediate formation. Density functional theory calculations elucidate catalyst‐dependent reaction pathways and show that distinct hydrogen migration barriers on Pt and Ru surfaces account for the observed voltage‐dependent selectivity. These findings suggest that Ru black is a promising electrocatalyst for developing commercially viable hydrogen storage technologies based on the EH‐DPM system.
- 23 July 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (36)
Direct Hydrogen Storage From Water to Diphenylmethane via Liquid Organic Hydrogen Carrier Electrochemical Hydrogenation System
This study presents a novel electrochemical hydrogenation (EH‐DPM) system that integrates clean hydrogen production and storage by utilizing a diphenylmethane (H0‐DPM, DPM) /dicyclohexylmethane (H12‐DPM, DCM) pair as a liquid organic hydrogen carrier (LOHC). The system operates in a full‐cell configuration, coupling a cathode for the electrochemical hydrogenation of H0‐DPM (EH‐DPM) with a proton exchange membrane water electrolyzer (PEMWE) anode, thereby enabling direct hydrogen storage in the LOHC during water splitting. The EH‐DPM system demonstrates higher energy efficiency than conventional PEMWE, achieving reaction currents at lower potentials. A comparative testing of Pt and Ru black electrocatalysts reveals that Ru black outperforms Pt black at higher voltages (> 1.5 V), achieving significantly higher selectivity (92.3% at 1.6 V) for the fully hydrogenated H12‐DPM. 1 H‐NMR and 13 C‐NMR analyses identifies cyclohexylmethylbenzene (H6‐DPM, CMB) as the sole hydrogenation intermediate, highlighting that optimal electrocatalyst selection is crucial for maximizing H12‐DPM yield and minimizing energy losses from intermediate formation. Density functional theory calculations elucidate catalyst‐dependent reaction pathways and show that distinct hydrogen migration barriers on Pt and Ru surfaces account for the observed voltage‐dependent selectivity. These findings suggest that Ru black is a promising electrocatalyst for developing commercially viable hydrogen storage technologies based on the EH‐DPM system.
- 9 April 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (10) , 9098-9109
Selectively Stabilized *NH Intermediates on Pt-Skins by L1 2 -Pt 3 Zn Intermetallic Core via Self-Generated Template Strategy for High-Performance Ammonia Oxidation
Ammonia is considered a carbon-free hydrogen carrier because of its ease of liquefaction and high hydrogen content and compatibility with existing infrastructure. To advance the use of ammonia as a scalable and cost-effective energy carrier, significant improvements are required across multiscale in the field of ammonia oxidation electrocatalysts. However, the development of efficient electrocatalysts for the electrochemical oxidation of ammonia is hindered by the limited understanding of the electrochemical reaction mechanism (e.g., nitrogen oxides (NOx) poisoning) during ammonia oxidation reaction (AOR). In this study, intermetallic PtZn (L10-PtZn/C and L12-Pt3Zn/C) catalysts were synthesized through a self-generated template method, where Zn species act a self-template during the annealing step as well as a dopant, and the effects of the catalyst structure and composition on the AOR performance were investigated. L12-Pt3Zn/C selectively stabilizes *NH intermediate on the surface and exhibits improved AOR activity and stability by significantly reducing NOx poisoning, as revealed by in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy. This provides a strategy to overcome the limitations of Pt-based catalysts. It also contributes to the efficient use of renewable energy, environmental protection, and the development of low-carbon energy systems.
- 9 April 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (10) , 9098-9109
Selectively Stabilized *NH Intermediates on Pt-Skins by L1 2 -Pt 3 Zn Intermetallic Core via Self-Generated Template Strategy for High-Performance Ammonia Oxidation
Ammonia is considered a carbon-free hydrogen carrier because of its ease of liquefaction and high hydrogen content and compatibility with existing infrastructure. To advance the use of ammonia as a scalable and cost-effective energy carrier, significant improvements are required across multiscale in the field of ammonia oxidation electrocatalysts. However, the development of efficient electrocatalysts for the electrochemical oxidation of ammonia is hindered by the limited understanding of the electrochemical reaction mechanism (e.g., nitrogen oxides (NOx) poisoning) during ammonia oxidation reaction (AOR). In this study, intermetallic PtZn (L10-PtZn/C and L12-Pt3Zn/C) catalysts were synthesized through a self-generated template method, where Zn species act a self-template during the annealing step as well as a dopant, and the effects of the catalyst structure and composition on the AOR performance were investigated. L12-Pt3Zn/C selectively stabilizes *NH intermediate on the surface and exhibits improved AOR activity and stability by significantly reducing NOx poisoning, as revealed by in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy. This provides a strategy to overcome the limitations of Pt-based catalysts. It also contributes to the efficient use of renewable energy, environmental protection, and the development of low-carbon energy systems.
- Open Access
- 31 March 2026
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 393
Percolation-driven iridium nanotube network linking utilization and durability for oxygen evolution electrode in proton exchange membrane water electrolysis
- 31 March 2026
- Published by Elsevier in Applied Catalysis B: Environment and Energy
- Vol. 393
Open AccessPercolation-driven iridium nanotube network linking utilization and durability for oxygen evolution electrode in proton exchange membrane water electrolysis
- 29 March 2026
- Published by Elsevier in Chemical Engineering Journal
- Vol. 536
Efficient and stable 40 W-class low-temperature NH3 electrolyzers for intermittent H2 production
- 29 March 2026
- Published by Elsevier in Chemical Engineering Journal
- Vol. 536
Efficient and stable 40 W-class low-temperature NH3 electrolyzers for intermittent H2 production
- Open Access
- 28 February 2026
- Published by The Korean Electrochemical Society - English Journal in Journal of Electrochemical Science and Technology
- Vol. 17 (1) , 38-49
Facet-Selective Bromide Adsorption at High-index Facets of Copper Sulfides for Improved Electrochemical Nitrogen Reduction Activity and Selectivity
Electrochemical nitrogen reduction reaction (eNRR) is a promising sustainable alternative to the energy-intensive Haber–Bosch process for ammonia (NH₃) synthesis. However, simultaneously achieving high activity and selectivity remains challenging due to competing hydrogen evolution reaction (HER). In this study, a series of copper sulfide catalysts were investigated for eNRR under ambient conditions. Copper sulfides featuring highly crystalline low-index (1 1 1) facets exhibited significant NH₃ production; however, the presence of high-index facets led to a reduction in Faradaic efficiency (F.E.) due to their higher activity toward the competing HER. To mitigate this intrinsic trade-off between activity and selectivity, bromide ions were introduced to selectively adsorb onto the high-index planes, effectively suppressing HER. Optimizing the bromide ion coverage on CuSₓ catalysts resulted in a maximum NH3 yield of 1.2 μmol h–¹ cm–² (JNH3 = 0.198 mA/cm2) and a F.E. of 23.34% at −0.6 VRHE, marking improvements of 84.0% in activity and 316% in selectivity compared to untreated catalysts. It was verified that bromide ions selectively passivate HER-prone surfaces without blocking the active sites responsible for nitrogen adsorption. This study highlights that facet-selective surface engineering using halide ions can simultaneously enhance both activity and selectivity in eNRR. It provides a rational design principle for improving catalytic performance in complex reaction environments where multiple pathways compete.
- 28 February 2026
- Published by The Korean Electrochemical Society - English Journal in Journal of Electrochemical Science and Technology
- Vol. 17 (1) , 38-49
Open AccessFacet-Selective Bromide Adsorption at High-index Facets of Copper Sulfides for Improved Electrochemical Nitrogen Reduction Activity and Selectivity
Electrochemical nitrogen reduction reaction (eNRR) is a promising sustainable alternative to the energy-intensive Haber–Bosch process for ammonia (NH₃) synthesis. However, simultaneously achieving high activity and selectivity remains challenging due to competing hydrogen evolution reaction (HER). In this study, a series of copper sulfide catalysts were investigated for eNRR under ambient conditions. Copper sulfides featuring highly crystalline low-index (1 1 1) facets exhibited significant NH₃ production; however, the presence of high-index facets led to a reduction in Faradaic efficiency (F.E.) due to their higher activity toward the competing HER. To mitigate this intrinsic trade-off between activity and selectivity, bromide ions were introduced to selectively adsorb onto the high-index planes, effectively suppressing HER. Optimizing the bromide ion coverage on CuSₓ catalysts resulted in a maximum NH3 yield of 1.2 μmol h–¹ cm–² (JNH3 = 0.198 mA/cm2) and a F.E. of 23.34% at −0.6 VRHE, marking improvements of 84.0% in activity and 316% in selectivity compared to untreated catalysts. It was verified that bromide ions selectively passivate HER-prone surfaces without blocking the active sites responsible for nitrogen adsorption. This study highlights that facet-selective surface engineering using halide ions can simultaneously enhance both activity and selectivity in eNRR. It provides a rational design principle for improving catalytic performance in complex reaction environments where multiple pathways compete.
- Open Access
- 13 January 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (4) , 3819-3830
Low-Temperature Electrocatalytic Ammonia Production: Study on the Nitrogen-Reducing Activity of Vanadium Sulfide Catalysts
- 13 January 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (4) , 3819-3830
Open AccessLow-Temperature Electrocatalytic Ammonia Production: Study on the Nitrogen-Reducing Activity of Vanadium Sulfide Catalysts
- Open Access
- 1 January 2026
- Published by Wiley in International Journal of Energy Research
- Vol. 2026 (1) , 6003539
A Comprehensive and Systematic Analysis of Performance‐Limiting Factors as a Function of IrO 2 Loading Amount in Proton Exchange Membrane Water Electrolysis: IrO 2 Ultra‐Low‐Loading Strategy
Proton exchange membrane water electrolysis (PEMWE) enables efficient hydrogen production under high current density operation but requires iridium‐based catalysts to sustain anodic oxygen evolution in acidic environments. Reducing Ir usage without sacrificing cell performance therefore represents a key requirement for practical system implementation. Many studies have shown that increasing Ir loading generally improves electrolyzer performance, but how performance limitations evolve across catalyst loading regimes has not been systematically resolved. In this work, the performance of a PEMWE cell was evaluated over a wide IrO 2 loading range of 0.01–4.0 mg cm −2 . Combined polarization analysis and electrochemical impedance spectroscopy (EIS) were employed to distinguish kinetic, ohmic, and mass‐transport contributions governing cell performance. Increasing catalyst loading substantially improved low‐current‐density operation through mitigation of charge‐transfer limitations, accompanied by a reduction in charge‐transfer resistance ( R ct ) from 5.08 to 0.41 Ω between 0.01 and 0.03 mg cm −2 . At higher loadings, performance improvement became progressively limited and approached current saturation at cell voltages above 1.8 V. The IrO 2 mass activity exhibited a maximum at intermediate loading (0.03 mg cm −2 ) and decreased with further loading increase, indicating incomplete utilization of catalyst layers at large thicknesses. The apparent electrochemically active surface area (ECSA)‐normalized charge‐transfer response remained within the same order of magnitude in the ultra‐low‐loading transition region, indicating that the sharp decrease in R ct primarily reflected an increase in electrochemically connected surface area. At the ultra‐low‐loading end of the range, electrodes prepared at ultra‐low loading showed elevated ohmic resistance associated with insufficient electrical connectivity and reduced interfacial contact with the porous transport layer (PTL). Enhancing PTL–electrode contact significantly improved performance under ultra‐low loading conditions. The results establish loading‐dependent performance regimes governed by distinct limiting processes and provide practical guidance for minimizing iridium usage while maintaining high PEMWE performance.
- 1 January 2026
- Published by Wiley in International Journal of Energy Research
- Vol. 2026 (1) , 6003539
Open AccessA Comprehensive and Systematic Analysis of Performance‐Limiting Factors as a Function of IrO 2 Loading Amount in Proton Exchange Membrane Water Electrolysis: IrO 2 Ultra‐Low‐Loading Strategy
Proton exchange membrane water electrolysis (PEMWE) enables efficient hydrogen production under high current density operation but requires iridium‐based catalysts to sustain anodic oxygen evolution in acidic environments. Reducing Ir usage without sacrificing cell performance therefore represents a key requirement for practical system implementation. Many studies have shown that increasing Ir loading generally improves electrolyzer performance, but how performance limitations evolve across catalyst loading regimes has not been systematically resolved. In this work, the performance of a PEMWE cell was evaluated over a wide IrO 2 loading range of 0.01–4.0 mg cm −2 . Combined polarization analysis and electrochemical impedance spectroscopy (EIS) were employed to distinguish kinetic, ohmic, and mass‐transport contributions governing cell performance. Increasing catalyst loading substantially improved low‐current‐density operation through mitigation of charge‐transfer limitations, accompanied by a reduction in charge‐transfer resistance ( R ct ) from 5.08 to 0.41 Ω between 0.01 and 0.03 mg cm −2 . At higher loadings, performance improvement became progressively limited and approached current saturation at cell voltages above 1.8 V. The IrO 2 mass activity exhibited a maximum at intermediate loading (0.03 mg cm −2 ) and decreased with further loading increase, indicating incomplete utilization of catalyst layers at large thicknesses. The apparent electrochemically active surface area (ECSA)‐normalized charge‐transfer response remained within the same order of magnitude in the ultra‐low‐loading transition region, indicating that the sharp decrease in R ct primarily reflected an increase in electrochemically connected surface area. At the ultra‐low‐loading end of the range, electrodes prepared at ultra‐low loading showed elevated ohmic resistance associated with insufficient electrical connectivity and reduced interfacial contact with the porous transport layer (PTL). Enhancing PTL–electrode contact significantly improved performance under ultra‐low loading conditions. The results establish loading‐dependent performance regimes governed by distinct limiting processes and provide practical guidance for minimizing iridium usage while maintaining high PEMWE performance.
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
Efficient bubble removal in superhydrophilic gas diffusion electrodes via poly(vinyl alcohol) coating for high-current anion-exchange membrane water electrolysis
Bubble-induced performance degradation caused by gas bubble accumulation, particularly at high current density, significantly hinders the performance of anion-exchange membrane water electrolysis (AEMWE).
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
Open AccessEfficient bubble removal in superhydrophilic gas diffusion electrodes via poly(vinyl alcohol) coating for high-current anion-exchange membrane water electrolysis
Bubble-induced performance degradation caused by gas bubble accumulation, particularly at high current density, significantly hinders the performance of anion-exchange membrane water electrolysis (AEMWE).