Duy Xuan Luong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Duy Xuan Luong has a total of 101 co-authors. Here are the top co-authors by number of shared publications:
- James M. Tour
Department of Chemistry, Rice University, Houston, USA
11 shared publications - Carter Kittrell
Department of Chemistry, Rice University, 6100 Main Street, Houston, Texas 77005, United States
4 shared publications - Weiyin Chen
Department of Nuclear Science and Engineering Massachusetts Institute of Technology Cambridge MA 02139 USA
4 shared publications - John Tianci Li
Department of Chemistry, Rice University, Houston, USA
3 shared publications - Lucas Eddy
Department of Chemistry, Rice University, Houston, USA
3 shared publications Paul A. Advincula
Department of Chemistry, Rice University, 6100 Main Street, Houston, Texas 77005, United States
3 shared publications
Latest Publications
- 11 February 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (15) , e2309956
Kinetically Controlled Synthesis of Metallic Glass Nanoparticles with Expanded Composition Space
Nanoscale metallic glasses offer opportunities for investigating fundamental properties of amorphous solids and technological applications in biomedicine, microengineering, and catalysis. However, their top‐down fabrication is limited by bulk counterpart availability, and bottom‐up synthesis remains underexplored due to strict formation conditions. Here, a kinetically controlled flash carbothermic reaction is developed, featuring ultrafast heating (>105 K s−1) and cooling rates (>104 K s−1), for synthesizing metallic glass nanoparticles within milliseconds. Nine compositional permutations of noble metals, base metals, and metalloid (M1─M2─P, M1 = Pt/Pd, M2 = Cu/Ni/Fe/Co/Sn) are synthesized with widely tunable particle sizes and substrates. Through combinatorial development, a substantially expanded composition space for nanoscale metallic glass is discovered compared to bulk counterpart, revealing that the nanosize effect enhances glass forming ability. Leveraging this, several nanoscale metallic glasses are synthesized with composition that have never, to the knowledge, been synthesized in bulk. The metallic glass nanoparticles exhibit high activity in heterogeneous catalysis, outperforming crystalline metal alloy nanoparticles.
- 11 February 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (15) , e2309956
Kinetically Controlled Synthesis of Metallic Glass Nanoparticles with Expanded Composition Space
Nanoscale metallic glasses offer opportunities for investigating fundamental properties of amorphous solids and technological applications in biomedicine, microengineering, and catalysis. However, their top‐down fabrication is limited by bulk counterpart availability, and bottom‐up synthesis remains underexplored due to strict formation conditions. Here, a kinetically controlled flash carbothermic reaction is developed, featuring ultrafast heating (>105 K s−1) and cooling rates (>104 K s−1), for synthesizing metallic glass nanoparticles within milliseconds. Nine compositional permutations of noble metals, base metals, and metalloid (M1─M2─P, M1 = Pt/Pd, M2 = Cu/Ni/Fe/Co/Sn) are synthesized with widely tunable particle sizes and substrates. Through combinatorial development, a substantially expanded composition space for nanoscale metallic glass is discovered compared to bulk counterpart, revealing that the nanosize effect enhances glass forming ability. Leveraging this, several nanoscale metallic glasses are synthesized with composition that have never, to the knowledge, been synthesized in bulk. The metallic glass nanoparticles exhibit high activity in heterogeneous catalysis, outperforming crystalline metal alloy nanoparticles.
- 27 November 2023
- Published by Wiley in Small Methods
- Vol. 8 (3) , e2301144
Automated Laboratory Kilogram‐Scale Graphene Production from Coal
The flash Joule heating (FJH) method converts many carbon feedstocks into graphene in milliseconds to seconds using an electrical pulse. This opens an opportunity for processing low or negative value resources, such as coal and plastic waste, into high value graphene. Here, a lab‐scale automation FJH system that allows the synthesis of 1.1 kg of turbostratic flash graphene from coal‐based metallurgical coke (MC) in 1.5 h is demonstrated. The process is based on the automated conversion of 5.7 g of MC per batch using an electrical pulse width modulation system to conduct the bottom‐up upcycle of MC into flash graphene. This study then compare this method to two other scalable graphene synthesis techniques by both a life cycle assessment and a technoeconomic assessment.
- 27 November 2023
- Published by Wiley in Small Methods
- Vol. 8 (3) , e2301144
Automated Laboratory Kilogram‐Scale Graphene Production from Coal
The flash Joule heating (FJH) method converts many carbon feedstocks into graphene in milliseconds to seconds using an electrical pulse. This opens an opportunity for processing low or negative value resources, such as coal and plastic waste, into high value graphene. Here, a lab‐scale automation FJH system that allows the synthesis of 1.1 kg of turbostratic flash graphene from coal‐based metallurgical coke (MC) in 1.5 h is demonstrated. The process is based on the automated conversion of 5.7 g of MC per batch using an electrical pulse width modulation system to conduct the bottom‐up upcycle of MC into flash graphene. This study then compare this method to two other scalable graphene synthesis techniques by both a life cycle assessment and a technoeconomic assessment.
- 7 August 2023
- Published by Office of Scientific and Technical Information (OSTI)
Developing a Facile Technology for Converting Domestic US Coal into High-Value Graphene
Universal Matter Ltd. was formed in July 2019 to scale-up and commercialize a breakthrough process, Flash Joule Heating (FJH), to transform different coal grades, into high-quality graphene. This graphene is made using a high-voltage electric discharge that brings the carbon source to temperatures higher than 3,000 K in less than 10 milliseconds. The short burst of electricity breaks all chemical bonds in the feedstock and reorders the carbon atoms into exceptionally thin layers of a special type of graphene, at an estimated $100 per ton in electricity cost. This process is capable of producing 1-5 layer-thick high-quality graphene (with defects of 99%) in a green, practical, and cost-effective process. The graphene produced in the FJH process is a very special kind of graphene called “turbostratic graphene” (TG). TG offers superior physical properties compared to other graphene structures on a similar weight basis. Unlike graphene made from graphite using traditional techniques, the graphene layers in TG stack in an irregular pattern that allows the graphene powder to be exfoliated more easily and blend more evenly within other materials. The TG produced using our FJH technology is the most economical graphene product that opens up significant large volume markets for end-use applications; it would allow the use of TG made from coal for commercial applications in several market segments including energy storage, sensors, hyper-lubricants, reinforced plastics, and building materials such as concrete.
- 7 August 2023
- Published by Office of Scientific and Technical Information (OSTI)
Developing a Facile Technology for Converting Domestic US Coal into High-Value Graphene
Universal Matter Ltd. was formed in July 2019 to scale-up and commercialize a breakthrough process, Flash Joule Heating (FJH), to transform different coal grades, into high-quality graphene. This graphene is made using a high-voltage electric discharge that brings the carbon source to temperatures higher than 3,000 K in less than 10 milliseconds. The short burst of electricity breaks all chemical bonds in the feedstock and reorders the carbon atoms into exceptionally thin layers of a special type of graphene, at an estimated $100 per ton in electricity cost. This process is capable of producing 1-5 layer-thick high-quality graphene (with defects of 99%) in a green, practical, and cost-effective process. The graphene produced in the FJH process is a very special kind of graphene called “turbostratic graphene” (TG). TG offers superior physical properties compared to other graphene structures on a similar weight basis. Unlike graphene made from graphite using traditional techniques, the graphene layers in TG stack in an irregular pattern that allows the graphene powder to be exfoliated more easily and blend more evenly within other materials. The TG produced using our FJH technology is the most economical graphene product that opens up significant large volume markets for end-use applications; it would allow the use of TG made from coal for commercial applications in several market segments including energy storage, sensors, hyper-lubricants, reinforced plastics, and building materials such as concrete.
- Open Access
- 22 December 2022
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 308 (6)
Ultra‐High Loading of Coal‐Derived Flash Graphene Additives in Epoxy Composites
Graphene has proved to be an exceptional reinforcing additive for composites, but the high cost of its synthesis has largely prevented its addition on industrial scales. Flash Joule heating provides a rapid, bulk‐scale method for graphene synthesis from coal materials, such as metallurgical coke (MC), into metallurgical coke‐derived flash graphene (MCFG). Here, this work investigates the properties of graphene‐epoxy composites in a higher nanofiller content regime than has previously been reported in literature. Composites with 20 to 50 wt% loading of MCFG are prepared by combining MCFG with diglycidyl ether bisphenol A epoxy precursor (DGEBA) and 1,5‐diamino‐2‐methylpentane. With a 1:2 ratio of MCFG:DGEBA, the Young's modulus increases by 92% and with a 1:3 ratio, hardness increases by 140%. At a 1:4 ratio of MCFG:DGEBA, compressive strength and maximum strain increase by 145% and 61%, respectively. At a 1:3 ratio of MCFG:DGEBA, toughness increases by 496%. Finally, at a 1:1 ratio of MCFG:DGEBA, GHG emissions, water consumption, and energy consumption are reduced by 33%, 47%, and 34%, respectively. As the cost of FG plummets, since it can be produced from very low cost materials like MC, in milliseconds with no solvent or water, the prospects are promising for its high‐loading use in composites.
- 22 December 2022
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 308 (6)
Open AccessUltra‐High Loading of Coal‐Derived Flash Graphene Additives in Epoxy Composites
Graphene has proved to be an exceptional reinforcing additive for composites, but the high cost of its synthesis has largely prevented its addition on industrial scales. Flash Joule heating provides a rapid, bulk‐scale method for graphene synthesis from coal materials, such as metallurgical coke (MC), into metallurgical coke‐derived flash graphene (MCFG). Here, this work investigates the properties of graphene‐epoxy composites in a higher nanofiller content regime than has previously been reported in literature. Composites with 20 to 50 wt% loading of MCFG are prepared by combining MCFG with diglycidyl ether bisphenol A epoxy precursor (DGEBA) and 1,5‐diamino‐2‐methylpentane. With a 1:2 ratio of MCFG:DGEBA, the Young's modulus increases by 92% and with a 1:3 ratio, hardness increases by 140%. At a 1:4 ratio of MCFG:DGEBA, compressive strength and maximum strain increase by 145% and 61%, respectively. At a 1:3 ratio of MCFG:DGEBA, toughness increases by 496%. Finally, at a 1:1 ratio of MCFG:DGEBA, GHG emissions, water consumption, and energy consumption are reduced by 33%, 47%, and 34%, respectively. As the cost of FG plummets, since it can be produced from very low cost materials like MC, in milliseconds with no solvent or water, the prospects are promising for its high‐loading use in composites.
- 21 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (30) , 35053-35063
Robust Superhydrophobic Surfaces via the Sand-In Method
Superhydrophobic surfaces have gained sustained attention because of their extensive applications in the fields of self-cleaning, anti-icing, and drag reduction systems. Water droplets must have large apparent contact angle (CA) (>150°) and small CA hysteresis (<10°) on these surfaces. However, previous research usually involves complex fabrication strategies to modify the surface wettability. It is also challenging to maintain the temporal and mechanical stability of the delicate surface textures. Here, we develop a one-step solvent-free sand-in method to fabricate robust superhydrophobic surfaces directly atop various substrates with an apparent CA up to ∼163.8° and hysteresis less than 5°. The water repellency can withstand 100 Scotch tape peeling tests and remain stable after being stored under ambient humid conditions in Houston, Texas, for 18 months or being heated at 130 °C in air for 24 h. The superhydrophobic surfaces have excellent anti-icing ability, including a ∼2.6× longer water freezing time and ∼40% smaller ice adhesion strength with the temperature as low as -35 °C. Since the surface layers are fabricated by sanding the substrates with the powder additives, the surface damage can be repaired by a direct re-sanding treatment with the same powder additives. Further sand-in condition screenings broaden surface wettability from hydrophilic to superhydrophobic. The sand-in method induces the surface modification and the formation of the tribofilm. Surface and materials characterizations reveal that both microstructures and nanoscale asperities of the tribofilms contribute to the robust superhydrophobic features of sanded surfaces.
- 21 July 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (30) , 35053-35063
Robust Superhydrophobic Surfaces via the Sand-In Method
Superhydrophobic surfaces have gained sustained attention because of their extensive applications in the fields of self-cleaning, anti-icing, and drag reduction systems. Water droplets must have large apparent contact angle (CA) (>150°) and small CA hysteresis (<10°) on these surfaces. However, previous research usually involves complex fabrication strategies to modify the surface wettability. It is also challenging to maintain the temporal and mechanical stability of the delicate surface textures. Here, we develop a one-step solvent-free sand-in method to fabricate robust superhydrophobic surfaces directly atop various substrates with an apparent CA up to ∼163.8° and hysteresis less than 5°. The water repellency can withstand 100 Scotch tape peeling tests and remain stable after being stored under ambient humid conditions in Houston, Texas, for 18 months or being heated at 130 °C in air for 24 h. The superhydrophobic surfaces have excellent anti-icing ability, including a ∼2.6× longer water freezing time and ∼40% smaller ice adhesion strength with the temperature as low as -35 °C. Since the surface layers are fabricated by sanding the substrates with the powder additives, the surface damage can be repaired by a direct re-sanding treatment with the same powder additives. Further sand-in condition screenings broaden surface wettability from hydrophilic to superhydrophobic. The sand-in method induces the surface modification and the formation of the tribofilm. Surface and materials characterizations reveal that both microstructures and nanoscale asperities of the tribofilms contribute to the robust superhydrophobic features of sanded surfaces.
- 23 March 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (4) , 6646-6656
Heteroatom-Doped Flash Graphene
Heteroatom doping can effectively tailor the local structures and electronic states of intrinsic two-dimensional materials, and endow them with modified optical, electrical, and mechanical properties. Recent studies have shown the feasibility of preparing doped graphene from graphene oxide and its derivatives via some post-treatments, including solid-state and solvothermal methods, but they require reactive and harsh reagents. However, direct synthesis of various heteroatom-doped graphene in larger quantities and high purity through bottom-up methods remains challenging. Here, we report catalyst-free and solvent-free direct synthesis of graphene doped with various heteroatoms in bulk via flash Joule heating (FJH). Seven types of heteroatom-doped flash graphene (FG) are synthesized through millisecond flashing, including single-element-doped FG (boron, nitrogen, oxygen, phosphorus, sulfur), two-element-co-doped FG (boron and nitrogen), as well as three-element-co-doped FG (boron, nitrogen, and sulfur). A variety of low-cost dopants, such as elements, oxides, and organic compounds are used. The graphene quality of heteroatom-doped FG is high, and similar to intrinsic FG, the material exhibits turbostraticity, increased interlayer spacing, and superior dispersibility. Electrochemical oxygen reduction reaction of different heteroatom-doped FG is tested, and sulfur-doped FG shows the best performance. Lithium metal battery tests demonstrate that nitrogen-doped FG exhibits a smaller nucleation overpotential compared to Cu or undoped FG. The electrical energy cost for the synthesis of heteroatom-doped FG synthesis is only 1.2 to 10.7 kJ g–1, which could render the FJH method suitable for low-cost mass production of heteroatom-doped graphene.
- 23 March 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (4) , 6646-6656
Heteroatom-Doped Flash Graphene
Heteroatom doping can effectively tailor the local structures and electronic states of intrinsic two-dimensional materials, and endow them with modified optical, electrical, and mechanical properties. Recent studies have shown the feasibility of preparing doped graphene from graphene oxide and its derivatives via some post-treatments, including solid-state and solvothermal methods, but they require reactive and harsh reagents. However, direct synthesis of various heteroatom-doped graphene in larger quantities and high purity through bottom-up methods remains challenging. Here, we report catalyst-free and solvent-free direct synthesis of graphene doped with various heteroatoms in bulk via flash Joule heating (FJH). Seven types of heteroatom-doped flash graphene (FG) are synthesized through millisecond flashing, including single-element-doped FG (boron, nitrogen, oxygen, phosphorus, sulfur), two-element-co-doped FG (boron and nitrogen), as well as three-element-co-doped FG (boron, nitrogen, and sulfur). A variety of low-cost dopants, such as elements, oxides, and organic compounds are used. The graphene quality of heteroatom-doped FG is high, and similar to intrinsic FG, the material exhibits turbostraticity, increased interlayer spacing, and superior dispersibility. Electrochemical oxygen reduction reaction of different heteroatom-doped FG is tested, and sulfur-doped FG shows the best performance. Lithium metal battery tests demonstrate that nitrogen-doped FG exhibits a smaller nucleation overpotential compared to Cu or undoped FG. The electrical energy cost for the synthesis of heteroatom-doped FG synthesis is only 1.2 to 10.7 kJ g–1, which could render the FJH method suitable for low-cost mass production of heteroatom-doped graphene.
- Top Cited PapersOpen Access
- 11 February 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (6) , eabm3132
Rare earth elements from waste
Rare earth elements (REEs) are critical materials in electronics and clean technologies. With the diminishing of easily accessible minerals for mining, the REE recovery from waste is an alternative toward a circular economy. Present methods for REE recovery suffer from lengthy purifications, low extractability, and high wastewater streams. Here, we report an ultrafast electrothermal process (~3000°C, ~1 s) based on flash Joule heating (FJH) for activating wastes to improve REE extractability. FJH thermally degrades or reduces the hard-to-dissolve REE species to components with high thermodynamic solubility, leading to ~2× increase in leachability and high recovery yields using diluted acid (e.g., 0.1 M HCl). The activation strategy is feasible for various wastes including coal fly ash, bauxite residue, and electronic waste. The rapid FJH process is energy-efficient with a low electrical energy consumption of 600 kWh ton −1 . The potential for this route to be rapidly scaled is outlined.
- 11 February 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (6) , eabm3132
Top Cited PapersOpen AccessRare earth elements from waste
Rare earth elements (REEs) are critical materials in electronics and clean technologies. With the diminishing of easily accessible minerals for mining, the REE recovery from waste is an alternative toward a circular economy. Present methods for REE recovery suffer from lengthy purifications, low extractability, and high wastewater streams. Here, we report an ultrafast electrothermal process (~3000°C, ~1 s) based on flash Joule heating (FJH) for activating wastes to improve REE extractability. FJH thermally degrades or reduces the hard-to-dissolve REE species to components with high thermodynamic solubility, leading to ~2× increase in leachability and high recovery yields using diluted acid (e.g., 0.1 M HCl). The activation strategy is feasible for various wastes including coal fly ash, bauxite residue, and electronic waste. The rapid FJH process is energy-efficient with a low electrical energy consumption of 600 kWh ton −1 . The potential for this route to be rapidly scaled is outlined.
- Top Cited Papers
- 17 June 2021
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 15 (7) , 11158-11167
Ultrafast and Controllable Phase Evolution by Flash Joule Heating
Flash Joule heating (FJH), an advanced material synthesis technique, has been used for the production of high-quality carbon materials. Direct current discharge through the precursors by large capacitors has successfully converted carbon-based starting materials into bulk quantities of turbostratic graphene by the FJH process. However, the formation of other carbon allotropes, such as nanodiamonds and concentric carbon materials, as well as the covalent functionalization of different carbon allotropes by the FJH process, remains challenging. Here, we report the solvent-free FJH synthesis of three different fluorinated carbon allotropes: fluorinated nanodiamonds, fluorinated turbostratic graphene, and fluorinated concentric carbon. This is done by millisecond flashing of organic fluorine compounds and fluoride precursors. Spectroscopic analysis confirms the modification of the electronic states and the existence of various short-range and long-range orders in the different fluorinated carbon allotropes. The flash-time-dependent relationship is further demonstrated to control the phase evolution and product compositions.
- 17 June 2021
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 15 (7) , 11158-11167
Top Cited PapersUltrafast and Controllable Phase Evolution by Flash Joule Heating
Flash Joule heating (FJH), an advanced material synthesis technique, has been used for the production of high-quality carbon materials. Direct current discharge through the precursors by large capacitors has successfully converted carbon-based starting materials into bulk quantities of turbostratic graphene by the FJH process. However, the formation of other carbon allotropes, such as nanodiamonds and concentric carbon materials, as well as the covalent functionalization of different carbon allotropes by the FJH process, remains challenging. Here, we report the solvent-free FJH synthesis of three different fluorinated carbon allotropes: fluorinated nanodiamonds, fluorinated turbostratic graphene, and fluorinated concentric carbon. This is done by millisecond flashing of organic fluorine compounds and fluoride precursors. Spectroscopic analysis confirms the modification of the electronic states and the existence of various short-range and long-range orders in the different fluorinated carbon allotropes. The flash-time-dependent relationship is further demonstrated to control the phase evolution and product compositions.
- 29 October 2020
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (11) , 15595-15604
Flash Graphene from Plastic Waste
In this work, an approach to upcycling plastic waste (PW) products is presented. The method relies on flash Joule heating (FJH) to convert PW into flash graphene (FG). In addition to FG, the process results in the formation of carbon oligomers, hydrogen, and light hydrocarbons. In order to make high-quality graphene, a sequential alternating current (AC) and direct current (DC) flash is used. The FJH process requires no catalyst and works for PW mixtures, which makes the process suitable for handling landfill PW. The energy required to convert PW to FG is ∼23 kJ/g or ∼$125 in electricity per ton of PW, potentially making this process economically attractive for scale-up. The FG was characterized by Raman spectroscopy and had an I2D/IG peak ratio up to 6 with a low-intensity D band. Moreover, transmission electron microscopy and X-ray diffraction analysis show that the FG is turbostratic with an interlayer spacing of 3.45 Å. The large interlayer spacing will facilitate its dispersion in liquids and composites. Analysis of FG dispersions in 1% Pluronic aqueous solution shows that concentrations up to 1.2 mg/mL can be achieved. The carbon oligomers that distilled from the process were characterized by Fourier transform infrared spectroscopy and have chemical structures similar to the starting PW. Initial analysis of gas-phase products shows the formation of considerable amounts of hydrogen along with other light hydrocarbons. As graphene is naturally occurring and shows a low toxicity profile, this could be an environmentally beneficial method to upcycle PW.
- 29 October 2020
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (11) , 15595-15604
Flash Graphene from Plastic Waste
In this work, an approach to upcycling plastic waste (PW) products is presented. The method relies on flash Joule heating (FJH) to convert PW into flash graphene (FG). In addition to FG, the process results in the formation of carbon oligomers, hydrogen, and light hydrocarbons. In order to make high-quality graphene, a sequential alternating current (AC) and direct current (DC) flash is used. The FJH process requires no catalyst and works for PW mixtures, which makes the process suitable for handling landfill PW. The energy required to convert PW to FG is ∼23 kJ/g or ∼$125 in electricity per ton of PW, potentially making this process economically attractive for scale-up. The FG was characterized by Raman spectroscopy and had an I2D/IG peak ratio up to 6 with a low-intensity D band. Moreover, transmission electron microscopy and X-ray diffraction analysis show that the FG is turbostratic with an interlayer spacing of 3.45 Å. The large interlayer spacing will facilitate its dispersion in liquids and composites. Analysis of FG dispersions in 1% Pluronic aqueous solution shows that concentrations up to 1.2 mg/mL can be achieved. The carbon oligomers that distilled from the process were characterized by Fourier transform infrared spectroscopy and have chemical structures similar to the starting PW. Initial analysis of gas-phase products shows the formation of considerable amounts of hydrogen along with other light hydrocarbons. As graphene is naturally occurring and shows a low toxicity profile, this could be an environmentally beneficial method to upcycle PW.
- 17 April 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (18) , 16815-16821
Highly Oxidized Graphene Quantum Dots from Coal as Efficient Antioxidants
Graphene quantum dots (GQDs) have recently been employed in various fields including medicine as antioxidants, primarily due to favorable biocompatibility in comparison to common inorganic quantum dots, although the structural features that lead to the biological activities of GQDs are poorly understood. Here we report that coal derived GQDs and their poly(ethylene glycol)-functionalized derivatives serve as efficient antioxidants, and we evaluate their electrochemical, chemical, and in vitro biological activity. Through the evaluation of scavenging abilities toward reactive oxygen species, we demonstrate correlation of π-conjugated stable radicals with activity.
- 17 April 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (18) , 16815-16821
Highly Oxidized Graphene Quantum Dots from Coal as Efficient Antioxidants
Graphene quantum dots (GQDs) have recently been employed in various fields including medicine as antioxidants, primarily due to favorable biocompatibility in comparison to common inorganic quantum dots, although the structural features that lead to the biological activities of GQDs are poorly understood. Here we report that coal derived GQDs and their poly(ethylene glycol)-functionalized derivatives serve as efficient antioxidants, and we evaluate their electrochemical, chemical, and in vitro biological activity. Through the evaluation of scavenging abilities toward reactive oxygen species, we demonstrate correlation of π-conjugated stable radicals with activity.