WCWeiyin Chen

Weiyin Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Weiyin Chen has a total of 162 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ultrafast synthesis of Bi–Sr–Ca–Cu–O superconductor within seconds via thermal shock

    by Vivienne Yiwei Liu, Weiyin Chen, Yimeng Huang, Zihan Lin, Ethan Yupeng Zheng, Yaoshen Niu, Bowen Zhang, Ju Li

  • Increasingly Reversible Na/Cl 2 and Li/Cl 2 Batteries

    by Guanzhou Zhu, Hongbin Xu, Shuo Wang, Yilin Zhang, Jen-Hung Fang, Tao Dai, Daniel J. Zheng, Weiyin Chen, Heejung Roh, Daniel Wang, et al.

    Sodium/chlorine and lithium/chlorine batteries are new types of high-voltage and -capacity batteries reported recently with great potential to be developed into high-energy-density batteries for real-world applications. In this work, we report using cobalt polyphthalocyanine grown on multiwalled carbon nanotubes as the positive electrode in both sodium/chlorine and lithium/chlorine batteries to achieve, for the first time, a stable cycling capacity well exceeding the first discharge capacity in chlorine batteries. We employed various techniques together with theoretical calculations to reveal that cobalt polyphthalocyanine not only facilitates the formation of submicron-sized sodium chloride crystals with excellent electrochemical activity, but also enhances the reversibility of chlorine/chloride redox by forming cobalt–chlorine and sodium–nitrogen bonds during battery cycling. Additionally, cobalt polyphthalocyanine acts as a good storage medium for the chlorine that is formed during battery charging. We also discovered that the metal center can be changed from cobalt to iron and the carbon substrate can be varied from multiwalled carbon nanotubes to graphite for both sodium/chlorine and lithium/chlorine batteries. The chlorine batteries can now operate using only a minimal amount of electrolyte, and we were able to construct a sodium/chlorine battery with ∼150 Wh kg–1 or ∼325 Wh L–1 full-cell energy density for the first time.


  • Open Access

    A Facile Route to Large‐Area 2D Pt

    by Minsik Kong, Zhen Zhang, Weiyin Chen, Ethan Yupeng Zheng, Aubrey Penn, Ju Li

    Platinum (Pt) is a popular hydrogen‐evolution reaction (HER) catalyst, yet its high‐cost limits industrial deployment. This is addressed by incorporating an oxygen‐deficient, gallium (Ga)‐rich gallium oxide (GaO x ) adhesion layer that reverses the dewetting thermodynamics, yielding continuous 2D Pt at sub‐nanometer thickness by simple direct current (DC) sputtering. Alloy anchoring and vacancy chemisorption produce mechanically robust, transparent, conductive films with high thermal stability. During HER, 2D Pt/GaO x reduces, forming a Ga‐Pt that further smoothens. The 1 nm film matches bulk Pt electrocatalytic activity while sustaining 1A cm −2 for 100 h without decay. Revealing the wetting mechanism including the effect of adhesion layer, and the depositing metals, the strategy generalizes to other noble metals with adhesion layers, offering a scalable route to ultrathin catalytic and electronic platforms.


  • Hybrid Solvating Electrolytes for Practical Metal Batteries

    by Weiyin Chen, Ju Li

    Sodium-metal batteries have gained widespread attention due to higher abundance and lower cost of sodium. Their applications depend on good stability of electrolytes against sodium-metal anode and cathode simultaneously. Here, we propose hybrid solvating electrolytes (HSEs), composed of both strongly and weakly solvating solvents of sodium salts, to tune the solubility, solvation structure, and electrochemical decomposition properties. Fifty HSEs are prepared by mixing various pre-labeled solvent molecules, and changing the molar ratio among solvents, validating the mixture selection requirements and correlations between salt/solvent types and their mixture-dependent performance, including oxidative stability, Coulombic efficiency, and cycling overpotential. A model hybrid solvent formed by mixing weakly solvating N,N-dimethyltrifluoromethane sulfonamide (DMTMSA) with strongly solvating tetrahydrofuran (THF) demonstrates strong beyond-rule-of-mixture effects, showing extraordinarily stable cycling performance against Na3V2(PO4)3, Na0.44MnO2 and NaNi1/3Fe1/3Mn1/3O2 cathodes, and Na-metal anode. Spectroscopic analysis and molecular dynamics simulations reflect the corresponding change in ion-dipole interaction and solvation structures, leading to distinct electrochemical cycling behavior for sodium metal. The strong-weak hybrid solvating principle can also be extended to prepare HSEs for lithium-metal batteries. Our work presents a guiding principle for electrolyte design to enable practical alkali-metal batteries.

  • Top Cited Papers

    A multimodal robotic platform for multi-element electrocatalyst discovery

    by Zhen Zhang, Zhichu Ren, Chia-Wei Hsu, Zhang-Wei Hong, Chi-Feng Lee, Aubrey Penn, Hongbin Xu, Daniel J. Zheng, Shuhan Miao, Yimeng Huang, et al.

    One of the goals of ‘AI for Science’ is to discover customized materials through real-world experiments. Pioneering advances have been achieved in computational predictions and the automation of materials synthesis1–7. Yet, most materials experimentation remains constrained to using unimodal active learning (AL) approaches, relying on a single data stream. The potential of AI to interpret experimental complexity remains largely untapped8,9. Here we present Copilot for Real-world Experimental Scientists (CRESt), a platform that integrates large multimodal models (LMMs, incorporating chemical compositions, text embeddings, and microstructural images) with Knowledge-Assisted Bayesian Optimization (KABO) and robotic automation. CRESt employs knowledge-embedding-based search space reduction and adaptive exploration–exploitation strategy to accelerate materials design, high-throughput synthesis and characterization, and electrochemical performance optimization. CRESt allows monitoring with cameras and vision-language-model-driven hypothesis generation to diagnose and correct experimental anomalies. Applied to electrochemical formate oxidation, CRESt explored over 900 catalyst chemistries and 3500 electrochemical tests within 3 months, identifying a state-of-the-art catalyst in the octonary chemical space (Pd–Pt–Cu–Au–Ir–Ce–Nb–Cr) which exhibits a 9.3-fold improvement in cost-specific performance.


  • Dimension Engineering of Boron Nitride Nanostructures through Catalytic Flash Joule Heating

    by Jinhang Chen, Yi Cheng, Phelecia Scotland, Jaeho Shin, Lorenzo Castelli, John Tianci Li, Weiyin Chen, Kevin M. Wyss, Qiming Liu, Obinna E. Onah, et al.

    Boron nitride (BN) is well-known for its excellent thermal conductivity, high chemical stability, and low dielectric constant, making it widely used as a lubricant, thermal management material, and electrical insulator. For different applications, the nanostructure of BN plays a prominent role. In particular, boron nitride nanotubes (BNNTs) are preferred for enhancing the properties in specific directions. Traditional BNNT synthetic methods often require valuable precursors and catalysts and prolonged reaction time for structure engineering, limiting their practical applications. Here, we present a dimension engineering strategy to controllably synthesize one-dimensional BNNTs and two-dimensional nanosheets (BNNSs) by flash Joule heating (FJH) within 1 min. The scalable production of ∼5 g is achieved per batch. During BN synthesis, sulfur is identified as a crucial additive that accelerates precursor dehydration and facilitates nanotube formation. When applied as additives in composites, BNNTs exhibit enhanced mechanical strength and thermal conductivity compared to BNNSs, highlighting the necessity of BN dimension engineering for diverse applications. This work offers a feasible strategy for tailoring BN nanostructures and optimizing their properties, with potential applicability in the synthesis of other nanomaterials beyond BN.


  • Open Access

    Rapid electrothermal rejuvenation of spent lithium cobalt oxide cathode

    by Yi Cheng, Jinhang Chen, Weiyin Chen, Qiming Liu, Obinna E. Onah, Zicheng Wang, Gang Wu, Tianyou Xie, Lucas Eddy, Boris I. Yakobson, et al.

    Increasing use of lithium-ion batteries has triggered intensive attention to the management of end-of-life batteries. Sustainable recycling of high-value cathode materials is needed to address resource depletion and environmental challenges. Traditional battery recycling methods, including pyro- and hydro-metallurgical methods, are material-destructive processes with substantial time, energy, and chemical consumption. Here, we develop a rapid and effective electrothermal method to rejuvenate spent lithium cobalt oxide cathodes within 30 s. By incorporating Mg and Al for surface engineering during the process, the structural stability of the regenerated cathode is enhanced by mitigating detrimental phase transformations at high voltage. Thus, the upcycled cathode exhibits a high capacity of ∼203 mA h g−1 at 0.2C at an elevated cut-off voltage of 4.6 V, and maintains 84% of the initial capacity after 200 cycles. According to life cycle assessment and techno-economic analysis, our process exhibits significantly reduced environmental impacts with lower energy consumption, greenhouse gas emission, capital, and operating cost, and no solvent usage, making it a promising route to further upcycle other battery materials towards a circular economy.


  • Coupling Amorphization and Compositional Optimization of Ternary Metal Phosphides toward High-Performance Electrocatalytic Hydrogen Production

    by Bing Deng, Zhen-Yu Wu, Erkang Feng, Lu Ma, Zhe Wang, Jinhang Chen, Lucas Eddy, Alexander Lathem, Teng Wang, Weiyin Chen, et al.

    Amorphous materials, with abundant active sites and unique electronic configurations, have the potential to outperform their crystalline counterparts in high-performance catalysis for clean energy. However, their synthesis and compositional optimization remain underexplored due to the strict conditions required for their formation. Here, we report the synthesis of ternary platinum-nickel-phosphorus (PtNiP) amorphous nanoparticles (ANPs) within milliseconds by flash Joule heating, which features ultrafast cooling that enables the vitrification of metal precursors. Through compositional optimization, the Gibbs free energy of hydrogen adsorption for Pt4Ni4P1 ANPs is optimized at 0.02 eV, an almost ideal value, even surpassing that of the benchmark metallic platinum catalyst. As a result, the PtNiP ANPs exhibited superior activity in electrocatalytic hydrogen evolution in acid electrolyte (η10 ∼ 14 mV, Tafel slope ∼ 18 mV dec-1, and mass activity 5× higher than state-of-the-art Pt/C). Life-cycle assessment and technoeconomic analysis suggest that, compared to existing processes, our approach enables notable reductions in greenhouse gas emission, energy consumption, and production cost for practical electrolyzer catalyst manufacturing.


  • Incomplete CO 2 Desorption Enhances O 2 Stability of Solid Amine Carbon Capture Sorbents

    by Paul E. Savas, Zhe Yuan, Nghi La, Weiyin Chen, Xu Wang, Xiaowei Wu, Thomas B Malloy, Praveen Bollini, James M. Tour

    Reducing carbon dioxide (CO 2 ) emissions is a critical environmental challenge. Capturing CO 2 by solid polyethylenimine (PEI) sorbents is proposed as a strategy to address this concern. The CO 2 forms carbamates with the amine groups on the solid sorbent. However, solid PEI sorbents are unstable under O 2 ‐containing flue gas streams, a property that has greatly limited their industrial importance. To combat this O 2 ‐sensitivity, the amount of CO 2 desorbed per cycle is reduced to protect amines by the formed carbamates. These carbamates sufficiently reduce oxidative cleavage and maintain a low k deac of −0.00373 cycle −1 while maintaining a working capacity of 2.88 wt% (0.65 mmol g −1 ) under an O 2 ‐containing gas mixture. Additionally, it is discovered that the degradation rate can be tuned through adjusting the sorbent working capacity; this tunability can be used to inform future process simulations. This approach offers an additive‐free pathway toward oxidatively stable PEI carbon capture sorbents.


  • Heteroatom-Substituted Reflashed Graphene

    by Phelecia Scotland, Lucas Eddy, Jinhang Chen, Weiyin Chen, Jacob L. Beckham, Kevin M. Wyss, Chi Hun Choi, Paul Andrade Advincula, Alexander Lathem, Obinna E. Onah, et al.

    Flash Joule heating is an ultrafast, energy-efficient, and scalable technique used in the production of a variety of organic and inorganic compounds, including flash graphene. This technique has also been used in the production of doped graphene by flash Joule heating of amorphous carbon in the presence of heteroatom-donating compounds. Herein, we report a modified flash Joule heating technique by which graphene is formed with up to 18 atom % of the graphene lattice containing substituted heteroatoms. This is achieved by reflashing graphene in the presence of heteroatom-donating compounds, allowing this substitution to occur at lower temperatures than previously reported for flash Joule heating-synthesized doped graphene and thereby permitting much higher amounts of heteroatom insertion into the graphene lattice. We demonstrate nitrogen, sulfur, phosphorus, and fluorine atom atomic substitution into or upon the graphene lattice, as well as multiheteroatom substitution. Finally, the implementation of the nitrogen-substituted reflashed graphene into battery anodes exhibits improved performance and stability relative to unsubstituted reflashed graphene battery anodes.