Joseph Sylvester Chang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Joseph Sylvester Chang has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
Wei Shu
Zero-Error Systems (ZES) Pte. Ltd., 25 International Business Park, #02-22/25, German
12 shared publications- Tong Ge
School of Electrical and Electronic Engineering, Nanyang Technological University, Jurong West, Singapore
11 shared publications - Bah-Hwee Gwee
Nanyang Technological University
8 shared publications - Linfei Guo
Nanyang Technological University, Singapore
7 shared publications - Huiqiao He
Nanyang Technological University, Singapore
6 shared publications - Victor Adrian
School of Electrical and Electronic Engineering, Nanyang Technological University, Nanyang Ave, Singapore
5 shared publications
Latest Publications
- Open Access
- 29 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Circuits and Systems
- Vol. 7, 218-229
A Novel Quadrature-Phase Sampling Technique for Filterless, Low-Complexity, High-Alias-Suppression in VCO-ADCs
Next-generation LiDAR systems demand unprecedented resolution, requiring wide signal bandwidth and high-density pixel arrays that constrain each pixel circuit to$\leq 0.01$ mm2. This limits the complexity and power available for anti-aliasing filtering in the receiver front-end, even though strong attenuation of interference and alias noise is critical to preserve signal fidelity. Voltage-controlled oscillator (VCO)-based analog-to-digital converters (ADCs) offer inherent anti-aliasing through spectral shaping, but for bandwidths$\geq $ 50 MHz, the attenuation is insufficient, necessitating dedicated analog filters that undermine area and power. To resolve this, we propose a novel sampling technique for VCO-ADCs, employing quadrature clocks instead of conventional clocking. The resulting output spectrum exhibits a quasi-$sinc^{3}$ -shaped response that improves alias attenuation by ~10 dB to 80 dB at 50 MHz bandwidth—the highest reported to date—eliminating the need for analog filters. We derive an analytical expression for this response, accounting for non-idealities and offering insight into the parameters governing the shaping behavior. The technique is demonstrated with a proposed filterless, low-complexity VCO-ADC circuit in CMOS 65 nm, occupying just 0.0017 mm2—43% smaller than the state-of-the-art—and dissipating only 0.42 mW at 2 GHz sampling in simulation. Benchmarking shows a figure-of-merit of 56 fJ/conversion-step,$\sim 1.1\times $ better than the best reported design.- 29 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Circuits and Systems
- Vol. 7, 218-229
Open AccessA Novel Quadrature-Phase Sampling Technique for Filterless, Low-Complexity, High-Alias-Suppression in VCO-ADCs
Next-generation LiDAR systems demand unprecedented resolution, requiring wide signal bandwidth and high-density pixel arrays that constrain each pixel circuit to$\leq 0.01$ mm2. This limits the complexity and power available for anti-aliasing filtering in the receiver front-end, even though strong attenuation of interference and alias noise is critical to preserve signal fidelity. Voltage-controlled oscillator (VCO)-based analog-to-digital converters (ADCs) offer inherent anti-aliasing through spectral shaping, but for bandwidths$\geq $ 50 MHz, the attenuation is insufficient, necessitating dedicated analog filters that undermine area and power. To resolve this, we propose a novel sampling technique for VCO-ADCs, employing quadrature clocks instead of conventional clocking. The resulting output spectrum exhibits a quasi-$sinc^{3}$ -shaped response that improves alias attenuation by ~10 dB to 80 dB at 50 MHz bandwidth—the highest reported to date—eliminating the need for analog filters. We derive an analytical expression for this response, accounting for non-idealities and offering insight into the parameters governing the shaping behavior. The technique is demonstrated with a proposed filterless, low-complexity VCO-ADC circuit in CMOS 65 nm, occupying just 0.0017 mm2—43% smaller than the state-of-the-art—and dissipating only 0.42 mW at 2 GHz sampling in simulation. Benchmarking shows a figure-of-merit of 56 fJ/conversion-step,$\sim 1.1\times $ better than the best reported design. - 25 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
An Adaptive Pre-Processing Module for ML/AI-Based SEL/μ-SEL Detection in COTS Systems without Physical Modification to the COTS System
In our envisioned “Chang’s Next Paradigm of New Space”, COTS systems – embodying multiple COTS ICs – would be employed in space missions. When applied to COTS systems with power management ICs (including multiple voltage regulators), reported ML/AI-based SEL/μ-SEL detection approaches require access to the internal sub-power rails (after regulators). This is because regulator-induced distortions significantly obscure SEL/μ-SEL characteristics on the external power rail (before regulators). However, accessing internal rails requires physical modification, which is highly undesirable. In this paper, we propose an adaptive pre-processing module that, for the first time, enables ML/AI-based SEL/μ-SEL detection in COTS systems without physical modification. Specifically, by compensating for regulator-induced distortions, our proposed module allows ML/AI-based approaches to detect SELs/μ-SELs by monitoring only the external power rail, thereby, very advantageously, without any physical modification to the COTS system. Integrated with this proposed module, our previous reported AI-based approach achieves a high average detection accuracy of 91.1%. This is a very worthy improvement of 11.1%–53.9% over reported approaches without our proposed module, while incurring modest hardware overhead.
- 25 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
An Adaptive Pre-Processing Module for ML/AI-Based SEL/μ-SEL Detection in COTS Systems without Physical Modification to the COTS System
In our envisioned “Chang’s Next Paradigm of New Space”, COTS systems – embodying multiple COTS ICs – would be employed in space missions. When applied to COTS systems with power management ICs (including multiple voltage regulators), reported ML/AI-based SEL/μ-SEL detection approaches require access to the internal sub-power rails (after regulators). This is because regulator-induced distortions significantly obscure SEL/μ-SEL characteristics on the external power rail (before regulators). However, accessing internal rails requires physical modification, which is highly undesirable. In this paper, we propose an adaptive pre-processing module that, for the first time, enables ML/AI-based SEL/μ-SEL detection in COTS systems without physical modification. Specifically, by compensating for regulator-induced distortions, our proposed module allows ML/AI-based approaches to detect SELs/μ-SELs by monitoring only the external power rail, thereby, very advantageously, without any physical modification to the COTS system. Integrated with this proposed module, our previous reported AI-based approach achieves a high average detection accuracy of 91.1%. This is a very worthy improvement of 11.1%–53.9% over reported approaches without our proposed module, while incurring modest hardware overhead.
- 1 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (4) , 4618-4629
A High-Efficiency Fast-Transient Double Hysteretic Control Point-of-Load Converter
As portable devices become increasingly sophisticated, the demands for their power management in terms of high power-efficiency and fast-transients are congruously higher. We present herein a point-of-load (PoL) converter with two interesting features. One, compared to state-of-the-art PoLs with comparable transient performance, it features higher power-efficiency across most of the load range. Two, compared to state-of-the-art PoLs with similar power-efficiency, it features faster transients. These attractive features are achieved by our novel proposed double hysteretic control that integrates a voltage-mode hysteretic controller (VMHC) and a current-mode hysteretic controller (CMHC). The modus operandi of the VMHC operates its discontinuous-conduction-mode and continuous-conduction-mode without a mode-selection circuit to derive high power-efficiency. The CMHC combines two conventional current-mode controls to prolong on-time and off-time extensions, enabling fast transients. On the basis of measurements on a monolithic prototype, the power-efficiency is >90% across the 2 mA–3 A load range with a peak-efficiency of 96.1%. The voltage undershoot and overshoot are 70 and 40 mV with recovery times of 3 and 2 μs in response to 2.7 A step-up and step-down load current transients (1 A/μs slew-rate), respectively. Compared to state-of-the-art designs, our PoL optimizes both power-efficiency and transient response, features the best figures of merit, and is highly competitive.
- 1 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (4) , 4618-4629
A High-Efficiency Fast-Transient Double Hysteretic Control Point-of-Load Converter
As portable devices become increasingly sophisticated, the demands for their power management in terms of high power-efficiency and fast-transients are congruously higher. We present herein a point-of-load (PoL) converter with two interesting features. One, compared to state-of-the-art PoLs with comparable transient performance, it features higher power-efficiency across most of the load range. Two, compared to state-of-the-art PoLs with similar power-efficiency, it features faster transients. These attractive features are achieved by our novel proposed double hysteretic control that integrates a voltage-mode hysteretic controller (VMHC) and a current-mode hysteretic controller (CMHC). The modus operandi of the VMHC operates its discontinuous-conduction-mode and continuous-conduction-mode without a mode-selection circuit to derive high power-efficiency. The CMHC combines two conventional current-mode controls to prolong on-time and off-time extensions, enabling fast transients. On the basis of measurements on a monolithic prototype, the power-efficiency is >90% across the 2 mA–3 A load range with a peak-efficiency of 96.1%. The voltage undershoot and overshoot are 70 and 40 mV with recovery times of 3 and 2 μs in response to 2.7 A step-up and step-down load current transients (1 A/μs slew-rate), respectively. Compared to state-of-the-art designs, our PoL optimizes both power-efficiency and transient response, features the best figures of merit, and is highly competitive.
- 6 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (10) , 3682-3693
A 50-MHz Pulse-Width Modulator Embodying Low-Loss Quasi-Dynamic Comparators for Very High-Frequency DC–DC Converters
In the next-generation Internet of Things (NG-IoT) applications with sub-50-mA loads, the state-of-the-art very high switching frequencies (VHFs, e.g., 50 MHz) dc-dc converters are typically power-inefficient at light loads, e.g., 60%. This is largely due to the high power losses of high-speed static comparators employed in the pulse-width modulator of the VHF converter, e.g., ~40% of the overall power losses. Dynamic comparators may mitigate the high loss, but they are impractical to pulse-width-modulation-based converters due to the high-speed clock generator requirement. To mitigate the power losses, we present a pulse-width-modulator converter embodying a proposed quasi-dynamic (QD) comparator (and its hysteretic variant). The innovation is the first-ever comparator that features a clock-free regenerative latch (CFRL), thereby enabling the comparator to simultaneously feature the high-speed and low-loss advantages of dynamic comparators, yet clockless operation of static comparators. Our 50-MHz pulse-modulator converter, realized in 65-nm CMOS and embodying the proposed QD comparators, features a high ~82% power efficiency at 10 mA (20% of max load)—${\ge }20$ % higher power efficiency than the state-of-the-art VHF converters. The proposed QD comparator therein dissipates ~145-$\mu $ W power and features 2.9-ns propagation delay—${\ge }40$ % lesser power-delay product than the state-of-the-art static comparators. The proposed QD comparator can be advantageously applied to replace static comparators in a myriad of applications, potentially improving their power efficiency without compromising high-speed operation.- 6 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (10) , 3682-3693
A 50-MHz Pulse-Width Modulator Embodying Low-Loss Quasi-Dynamic Comparators for Very High-Frequency DC–DC Converters
In the next-generation Internet of Things (NG-IoT) applications with sub-50-mA loads, the state-of-the-art very high switching frequencies (VHFs, e.g., 50 MHz) dc-dc converters are typically power-inefficient at light loads, e.g., 60%. This is largely due to the high power losses of high-speed static comparators employed in the pulse-width modulator of the VHF converter, e.g., ~40% of the overall power losses. Dynamic comparators may mitigate the high loss, but they are impractical to pulse-width-modulation-based converters due to the high-speed clock generator requirement. To mitigate the power losses, we present a pulse-width-modulator converter embodying a proposed quasi-dynamic (QD) comparator (and its hysteretic variant). The innovation is the first-ever comparator that features a clock-free regenerative latch (CFRL), thereby enabling the comparator to simultaneously feature the high-speed and low-loss advantages of dynamic comparators, yet clockless operation of static comparators. Our 50-MHz pulse-modulator converter, realized in 65-nm CMOS and embodying the proposed QD comparators, features a high ~82% power efficiency at 10 mA (20% of max load)—${\ge }20$ % higher power efficiency than the state-of-the-art VHF converters. The proposed QD comparator therein dissipates ~145-$\mu $ W power and features 2.9-ns propagation delay—${\ge }40$ % lesser power-delay product than the state-of-the-art static comparators. The proposed QD comparator can be advantageously applied to replace static comparators in a myriad of applications, potentially improving their power efficiency without compromising high-speed operation.- 6 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (8) , 2680-2688
Detection and Protection of a COTS System Against Micro-Single-Event-Latchups (μ-SELs) and SELs: A Step Toward the Next-Paradigm in New Space
We envision that the ’next-paradigm’ of New Space will involve the employment of COTS systems (embodying multiple COTS ICs) vis-à-vis individual COTS ICs today. Most COTS ICs and COTS systems are susceptible to radiation effects, where micro-Single-Event-Latchups (μ-SELs) and SELs are of the most concern. Since reported approaches are limited to protecting an individual COTS IC, their application to every COTS IC within the system would render considerable overheads and potentially degraded performance. In this paper, we propose an approach to detect and protect a COTS system (vis-à-vis an individual COTS IC) against μ-SELs/SELs, making a step towards our envisioned ’next-paradigm’ of New Space. Our proposed approach monitors only the current of the COTS system’s total power rail, where μ-SELs/SELs may occur in any COTS IC therein. Of note, as this current is obtained outside of the COTS system, the COTS system is unmodified. We propose to adopt the Long-Short-Term-Memory (LSTM) neural network for μ-SEL/SEL detection. Our proposed AI-based approach achieves high (~95%) detection accuracy with fast (~0.5 ms) response time and low (~73 mW) power dissipation. Specifically, our approach improves accuracy by ~15%-60% over reported approaches and matches our prior work on an individual COTS IC (not a COTS system). It reduces power dissipation by ~11%-64% compared to reported approaches and is ~25%-55% higher than our prior work; its response time is 1.6x-255.6x faster than reported approaches and is 0.2x-0.4x slower than our prior work. In view of these attributes, our proposed AI-based approach is appropriate for the ‘next-paradigm’ of New Space.
- 6 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (8) , 2680-2688
Detection and Protection of a COTS System Against Micro-Single-Event-Latchups (μ-SELs) and SELs: A Step Toward the Next-Paradigm in New Space
We envision that the ’next-paradigm’ of New Space will involve the employment of COTS systems (embodying multiple COTS ICs) vis-à-vis individual COTS ICs today. Most COTS ICs and COTS systems are susceptible to radiation effects, where micro-Single-Event-Latchups (μ-SELs) and SELs are of the most concern. Since reported approaches are limited to protecting an individual COTS IC, their application to every COTS IC within the system would render considerable overheads and potentially degraded performance. In this paper, we propose an approach to detect and protect a COTS system (vis-à-vis an individual COTS IC) against μ-SELs/SELs, making a step towards our envisioned ’next-paradigm’ of New Space. Our proposed approach monitors only the current of the COTS system’s total power rail, where μ-SELs/SELs may occur in any COTS IC therein. Of note, as this current is obtained outside of the COTS system, the COTS system is unmodified. We propose to adopt the Long-Short-Term-Memory (LSTM) neural network for μ-SEL/SEL detection. Our proposed AI-based approach achieves high (~95%) detection accuracy with fast (~0.5 ms) response time and low (~73 mW) power dissipation. Specifically, our approach improves accuracy by ~15%-60% over reported approaches and matches our prior work on an individual COTS IC (not a COTS system). It reduces power dissipation by ~11%-64% compared to reported approaches and is ~25%-55% higher than our prior work; its response time is 1.6x-255.6x faster than reported approaches and is 0.2x-0.4x slower than our prior work. In view of these attributes, our proposed AI-based approach is appropriate for the ‘next-paradigm’ of New Space.
- 24 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (4) , 942-952
Single-Ended/Differential Wideband Track-and-Hold Amplifier in 22-nm FD-SOI CMOS Process
The impending 6G communication based on the software defined radio (SDR) requires a radio frequency (RF) track-and-hold amplifier (THA). This THA serves as the frequency down-converter and the single-to-differential interface to the downstream analog-to-digital converter (ADC). We present a CMOS RF THA that features wide and width (18 GHz), yet high linearity (spurious free dynamic range (SFDR) of 56.7 dB) and not requiring an external balun. These features are derived from our proposed isolation technique based on our proposed double source follower enhanced (DSFE) structure. To realize the single-to-differential conversion without an external balun, we design an independent balun as the first stage. Thereafter, we employ our proposed feedforward compensation technique (FCT) along with the reported phase correction technique (PCT) to reduce the output mismatches while simultaneously enhancing the linearity and bandwidth. We monolithically realize the RF THA in 22-nm fully-depleted silicon-on-insulator (FD-SOI) CMOS operating at 1.8 V. Measurements depict that the input bandwidth is wide (18 GHz), yet featuring high linearity (SFDR =56.7 dB at 15 GHz) with 2 GS/s sampling rate. The power consumption and the chip area are low and small at 216 mW and 0.07 mm2, respectively. When benchmarked against reported III/V RF THAs, the proposed CMOS RF THA is very competitive—comparable bandwidth, yet simultaneously higher linearity, potentially lower cost, lower power dissipation, and smaller die area. Further because it is realized in CMOS, it facilitates integration to other CMOS circuits in the same system-on-chip (SoC).
- 24 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (4) , 942-952
Single-Ended/Differential Wideband Track-and-Hold Amplifier in 22-nm FD-SOI CMOS Process
The impending 6G communication based on the software defined radio (SDR) requires a radio frequency (RF) track-and-hold amplifier (THA). This THA serves as the frequency down-converter and the single-to-differential interface to the downstream analog-to-digital converter (ADC). We present a CMOS RF THA that features wide and width (18 GHz), yet high linearity (spurious free dynamic range (SFDR) of 56.7 dB) and not requiring an external balun. These features are derived from our proposed isolation technique based on our proposed double source follower enhanced (DSFE) structure. To realize the single-to-differential conversion without an external balun, we design an independent balun as the first stage. Thereafter, we employ our proposed feedforward compensation technique (FCT) along with the reported phase correction technique (PCT) to reduce the output mismatches while simultaneously enhancing the linearity and bandwidth. We monolithically realize the RF THA in 22-nm fully-depleted silicon-on-insulator (FD-SOI) CMOS operating at 1.8 V. Measurements depict that the input bandwidth is wide (18 GHz), yet featuring high linearity (SFDR =56.7 dB at 15 GHz) with 2 GS/s sampling rate. The power consumption and the chip area are low and small at 216 mW and 0.07 mm2, respectively. When benchmarked against reported III/V RF THAs, the proposed CMOS RF THA is very competitive—comparable bandwidth, yet simultaneously higher linearity, potentially lower cost, lower power dissipation, and smaller die area. Further because it is realized in CMOS, it facilitates integration to other CMOS circuits in the same system-on-chip (SoC).
- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Flexible Electronics
- Vol. 3 (6) , 224-227
Guest Editorial: Special Issue of Selected Extended Papers From the International Flexible Electronics Technology Conference (IFETC) 2023
This issue of the IEEE Journal on Flexible Electronics (J-FLEX) presents the Special Section containing eight revised and extended versions of selected papers presented at the 5th IEEE International Flexible Electronics Technology Conference (IFETC) 2023 held at the DoubleTree by Hilton Hotel in San Jose, CA, USA during August 13–16, 2023.
- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Flexible Electronics
- Vol. 3 (6) , 224-227
Guest Editorial: Special Issue of Selected Extended Papers From the International Flexible Electronics Technology Conference (IFETC) 2023
This issue of the IEEE Journal on Flexible Electronics (J-FLEX) presents the Special Section containing eight revised and extended versions of selected papers presented at the 5th IEEE International Flexible Electronics Technology Conference (IFETC) 2023 held at the DoubleTree by Hilton Hotel in San Jose, CA, USA during August 13–16, 2023.
- 20 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1654-1662
Design and Implementation of a High-Speed Low-Power K -Nearest-Neighbor-Based Algorithm for Detecting Micro-Single-Event Latchups
In an irradiation environment such as space, Single-Event-Latchup (SEL) is a radiation effect that may cause an abnormal high-current state in semiconductor devices, particularly in commercial-off-the-shelf (COTS) integrated circuits (ICs). On the other hand, the micro-SEL (μ-SEL) is lower-current and more localized, and therefore more difficult to detect. Recent reported work embodying machine learning to detect μ-SELs is only partially successful (70% accuracy), yet non-real-time detection (50 s) and with high power dissipation (82-132 mW). In this paper, we propose a novel software-hardware co-optimized high-speed low-power k -nearest-neighbors-based (KNN-based) algorithm to protect a COTS IC against μ-SELs. Further, to obtain the highest μ-SEL detection accuracy, yet with low hardware and power overhead, we propose two features of μ-SEL characteristics in addition to the reported seven. The two proposed features are very worthy – the optimum requires five features (of which two are the proposed). When implemented in a Field-Programmable Gate Array (FPGA) clocked at 10 MHz, our prototype achieves high (95%) μ-SEL detection accuracy, yet real-time (110 μs) detection and low (47 mW) power dissipation – equivalent to 36% improved accuracy, yet ~450,000x faster detection and 43%-64% lower power dissipation over the reported work. This renders our proposed approach appropriate for power-constrained space applications.
- 20 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 71 (8) , 1654-1662
Design and Implementation of a High-Speed Low-Power K -Nearest-Neighbor-Based Algorithm for Detecting Micro-Single-Event Latchups
In an irradiation environment such as space, Single-Event-Latchup (SEL) is a radiation effect that may cause an abnormal high-current state in semiconductor devices, particularly in commercial-off-the-shelf (COTS) integrated circuits (ICs). On the other hand, the micro-SEL (μ-SEL) is lower-current and more localized, and therefore more difficult to detect. Recent reported work embodying machine learning to detect μ-SELs is only partially successful (70% accuracy), yet non-real-time detection (50 s) and with high power dissipation (82-132 mW). In this paper, we propose a novel software-hardware co-optimized high-speed low-power k -nearest-neighbors-based (KNN-based) algorithm to protect a COTS IC against μ-SELs. Further, to obtain the highest μ-SEL detection accuracy, yet with low hardware and power overhead, we propose two features of μ-SEL characteristics in addition to the reported seven. The two proposed features are very worthy – the optimum requires five features (of which two are the proposed). When implemented in a Field-Programmable Gate Array (FPGA) clocked at 10 MHz, our prototype achieves high (95%) μ-SEL detection accuracy, yet real-time (110 μs) detection and low (47 mW) power dissipation – equivalent to 36% improved accuracy, yet ~450,000x faster detection and 43%-64% lower power dissipation over the reported work. This renders our proposed approach appropriate for power-constrained space applications.