Abstract
Next-generation LiDAR systems demand unprecedented resolution, requiring wide signal bandwidth and high-density pixel arrays that constrain each pixel circuit to $\leq 0.01$ mm2. This limits the complexity and power available for anti-aliasing filtering in the receiver front-end, even though strong attenuation of interference and alias noise is critical to preserve signal fidelity. Voltage-controlled oscillator (VCO)-based analog-to-digital converters (ADCs) offer inherent anti-aliasing through spectral shaping, but for bandwidths $\geq $ 50 MHz, the attenuation is insufficient, necessitating dedicated analog filters that undermine area and power. To resolve this, we propose a novel sampling technique for VCO-ADCs, employing quadrature clocks instead of conventional clocking. The resulting output spectrum exhibits a quasi- $sinc^{3}$ -shaped response that improves alias attenuation by ~10 dB to 80 dB at 50 MHz bandwidth—the highest reported to date—eliminating the need for analog filters. We derive an analytical expression for this response, accounting for non-idealities and offering insight into the parameters governing the shaping behavior. The technique is demonstrated with a proposed filterless, low-complexity VCO-ADC circuit in CMOS 65 nm, occupying just 0.0017 mm2—43% smaller than the state-of-the-art—and dissipating only 0.42 mW at 2 GHz sampling in simulation. Benchmarking shows a figure-of-merit of 56 fJ/conversion-step, $\sim 1.1\times $ better than the best reported design.
Funding Information
  • Ministry of Education (RG132/22)
  • Ministry of Education (MOE-T2EP50222-0013)

This publication has 27 references indexed in Scilit: