G.Raaja Raghav
Research Subjects
G.Raaja Raghav has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- R. Ashok Kumar
K.L.N. College of Engineering, Madurai, India
5 shared publications - K. J. Nagarajan
Department of Mechanical Engineering, K.L.N. College of Engineering, Pottapalayam, India
4 shared publications - A. N. Balaji
Department of Mechanical Engineering, K.L.N. College of Engineering, Pottapalayam, Tamil Nadu, India
2 shared publications - Balachandran Surya Rajan
Department of Mechanical Engineering B.S. Abdur Rahman Crescent Institute of Science and Technology Chennai Tamil Nadu India
2 shared publications K J Nagarajan
Mechanical engineering , KLN College of Engineering, pottapalayam, sivagangai, Pottapalayam, tamilnadu, 630612, INDIA
2 shared publicationsR. Sujith
SCMS School of Engineering and Technology
2 shared publications
Latest Publications
- 16 December 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (8)
Extraction of Cellulose Nanocrystals from Linen Waste and Their Application in Reinforcing PVA Composites for Packaging Films
The escalating environmental concerns surrounding conventional packaging materials necessitate a paradigm shift towards sustainable alternatives. Similarly, the mounting global textile waste crisis calls for innovative strategies that promote circularity, reuse and eco-friendly material choices. Linen material is often used as clothing material that are woven from raw flax fibers after undergoing various process. They are often thrown away in bulk after being damaged or no longer usable. Also, a certain amount of flax fiber is often unused during the production of linen clothing. In the current study, fibers of this unusable linen material and the fibers of unused flax during the production of linen clothing is taken as a forerunner for the cellulose nanocrystals (CNCs) extraction through alkalization and sulphuric acid hydrolysis and also for the evaluation of reinforcing capability of these fibers with polyvinyl alcohol (PVA). Linen was chosen for nanocellulose extraction because flax fibers, its primary component are rich in cellulose and generate abundant waste during textile production. The thermogravimetric analysis (TGA), electron microscopy and X-ray diffraction (XRD) are used to characterize the isolated CNCs. The CNCs had a high crystallinity of 67% and a rod-like structure, measuring 50 ± 15 nm as length and 15 ± 3 nm as breadth. PVA with 3% CNCs has strong thermal resistivity according to the thermogravimetric analysis. Additionally, the impact of CNC integration on the tensile strength, biodegradation, thermal behaviour and rate of absorption of water of the nanocomposite films was investigated. The findings indicate that active packaging applications may be possible with the bio-nanocomposite film's enhanced physical, functional, thermal and biodegradation properties.
- 16 December 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (8)
Extraction of Cellulose Nanocrystals from Linen Waste and Their Application in Reinforcing PVA Composites for Packaging Films
The escalating environmental concerns surrounding conventional packaging materials necessitate a paradigm shift towards sustainable alternatives. Similarly, the mounting global textile waste crisis calls for innovative strategies that promote circularity, reuse and eco-friendly material choices. Linen material is often used as clothing material that are woven from raw flax fibers after undergoing various process. They are often thrown away in bulk after being damaged or no longer usable. Also, a certain amount of flax fiber is often unused during the production of linen clothing. In the current study, fibers of this unusable linen material and the fibers of unused flax during the production of linen clothing is taken as a forerunner for the cellulose nanocrystals (CNCs) extraction through alkalization and sulphuric acid hydrolysis and also for the evaluation of reinforcing capability of these fibers with polyvinyl alcohol (PVA). Linen was chosen for nanocellulose extraction because flax fibers, its primary component are rich in cellulose and generate abundant waste during textile production. The thermogravimetric analysis (TGA), electron microscopy and X-ray diffraction (XRD) are used to characterize the isolated CNCs. The CNCs had a high crystallinity of 67% and a rod-like structure, measuring 50 ± 15 nm as length and 15 ± 3 nm as breadth. PVA with 3% CNCs has strong thermal resistivity according to the thermogravimetric analysis. Additionally, the impact of CNC integration on the tensile strength, biodegradation, thermal behaviour and rate of absorption of water of the nanocomposite films was investigated. The findings indicate that active packaging applications may be possible with the bio-nanocomposite film's enhanced physical, functional, thermal and biodegradation properties.
- 23 January 2025
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
MORPHOLOGICAL INSIGHTS OF CARBON NANOMATERIALS USING ATOMIC FORCE MICROSCOPY AND THEIR APPLICATIONS
This paper reviews the application of atomic force microscopy (AFM) in analyzing the nanoscale morphological properties of key carbon nanomaterials: carbon nanotubes (CNTs), graphene, and fullerene. AFM imaging techniques, operating at sub-nanometer resolutions of approximately 0.5 nm, are utilized to evaluate surface topography, roughness, and dimensional attributes. CNTs exhibit diameters ranging from 1[ ]nm to 10[ ]nm, with surface roughness correlating to their mechanical strength, reported to exceed 50[ ]GPa. For graphene, AFM measurements confirm a monolayer thickness of ∼0.34[ ]nm, while defects such as wrinkles and grain boundaries are identified, which significantly influence its exceptional thermal conductivity of up to 5000 W/mK. Fullerene structures, characterized by their spherical morphology and uniform diameters averaging 0.7[ ]nm, demonstrate superior dispersion in composite matrices. The review further explores the synergistic effects and trade-offs in utilizing these nanomaterials as fillers in composite systems. For instance, graphene improves electrical conductivity by over 200% in polymer composites, while CNTs contribute significantly to mechanical reinforcement, and fullerene enhances chemical stability and compatibility in biomedical applications. Through comparative analysis, the paper identifies pathways to optimize filler performance through tailored dispersion and functionalization. These insights serve as a foundation for future innovations in nanomaterial-enhanced composites across industries.
- 23 January 2025
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
MORPHOLOGICAL INSIGHTS OF CARBON NANOMATERIALS USING ATOMIC FORCE MICROSCOPY AND THEIR APPLICATIONS
This paper reviews the application of atomic force microscopy (AFM) in analyzing the nanoscale morphological properties of key carbon nanomaterials: carbon nanotubes (CNTs), graphene, and fullerene. AFM imaging techniques, operating at sub-nanometer resolutions of approximately 0.5 nm, are utilized to evaluate surface topography, roughness, and dimensional attributes. CNTs exhibit diameters ranging from 1[ ]nm to 10[ ]nm, with surface roughness correlating to their mechanical strength, reported to exceed 50[ ]GPa. For graphene, AFM measurements confirm a monolayer thickness of ∼0.34[ ]nm, while defects such as wrinkles and grain boundaries are identified, which significantly influence its exceptional thermal conductivity of up to 5000 W/mK. Fullerene structures, characterized by their spherical morphology and uniform diameters averaging 0.7[ ]nm, demonstrate superior dispersion in composite matrices. The review further explores the synergistic effects and trade-offs in utilizing these nanomaterials as fillers in composite systems. For instance, graphene improves electrical conductivity by over 200% in polymer composites, while CNTs contribute significantly to mechanical reinforcement, and fullerene enhances chemical stability and compatibility in biomedical applications. Through comparative analysis, the paper identifies pathways to optimize filler performance through tailored dispersion and functionalization. These insights serve as a foundation for future innovations in nanomaterial-enhanced composites across industries.
- Open Access
- 1 June 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (6) , 066513
Experimental investigation in enhancing the mechanical, wear and corrosion resistance properties of Al6061-SiC-NSA composites fabricated using stir casting process
The study investigates the mechanical, and tribological properties of Al6061-SiC-NSA hybrid composites. The characterization via FE-SEM reveals NSA particle’s crystal structure and agglomeration, with an average particle size of approximately 400 nm. The EDS analysis confirms the presence of oxides (TiO2, SiO2, Fe2O3, Al2O3) along with calcium and potassium. The XRD spectra corroborate these findings, additionally identifying Calcite and intermetallic compounds. The Al6061–5SiC-10NSA composites has improved compressive strength of 254 MPa compared to 220 MPa for base Al6061 alloy. The tensile strength of base Al6061 (100 MPa) decreased to 70 MPa for Al6061–5SiC-20NSA composites. The tensile strength decreases with increasing NSA content. Fracture analysis indicates ductile fracture mechanisms, supported by FE-SEM images displaying honeycomb-like structures and dimples. Impact testing reveals reduced impact strength in composites compared to Al6061 (26J3), with Al6061–10SiC-5NSA exhibiting the best toughness of 22.5 J3. Density decreases in composites, with density of Al6061–5SiC-20NSA composites has reduced to 2.40 g cm−3. The microhardness of Al6061–10SiC-5NSA has better value of 109 HV, whereas further addition of NSA has resulted in decrease in microhardness of composites. Pin-on-disc wear tests demonstrate improved wear resistance with increased NSA content, with Al6061–5SiC-20NSA outperforming other compositions. COF decreases with increased NSA content and sliding speed. FE-SEM analysis of worn surfaces reveals that the major wear mechanism is adhesive wear followed by delamination, further the oxide formation along the surface aiding wear resistance of the composites. Tafel testing indicates decreased corrosion potential with increased NSA content, with Al6061–5SiC-20NSA exhibiting improved corrosion resistance.
- 1 June 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (6) , 066513
Open AccessExperimental investigation in enhancing the mechanical, wear and corrosion resistance properties of Al6061-SiC-NSA composites fabricated using stir casting process
The study investigates the mechanical, and tribological properties of Al6061-SiC-NSA hybrid composites. The characterization via FE-SEM reveals NSA particle’s crystal structure and agglomeration, with an average particle size of approximately 400 nm. The EDS analysis confirms the presence of oxides (TiO2, SiO2, Fe2O3, Al2O3) along with calcium and potassium. The XRD spectra corroborate these findings, additionally identifying Calcite and intermetallic compounds. The Al6061–5SiC-10NSA composites has improved compressive strength of 254 MPa compared to 220 MPa for base Al6061 alloy. The tensile strength of base Al6061 (100 MPa) decreased to 70 MPa for Al6061–5SiC-20NSA composites. The tensile strength decreases with increasing NSA content. Fracture analysis indicates ductile fracture mechanisms, supported by FE-SEM images displaying honeycomb-like structures and dimples. Impact testing reveals reduced impact strength in composites compared to Al6061 (26J3), with Al6061–10SiC-5NSA exhibiting the best toughness of 22.5 J3. Density decreases in composites, with density of Al6061–5SiC-20NSA composites has reduced to 2.40 g cm−3. The microhardness of Al6061–10SiC-5NSA has better value of 109 HV, whereas further addition of NSA has resulted in decrease in microhardness of composites. Pin-on-disc wear tests demonstrate improved wear resistance with increased NSA content, with Al6061–5SiC-20NSA outperforming other compositions. COF decreases with increased NSA content and sliding speed. FE-SEM analysis of worn surfaces reveals that the major wear mechanism is adhesive wear followed by delamination, further the oxide formation along the surface aiding wear resistance of the composites. Tafel testing indicates decreased corrosion potential with increased NSA content, with Al6061–5SiC-20NSA exhibiting improved corrosion resistance.
- Open Access
- 1 February 2024
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metallofizika i Noveishie Tekhnologii
- Vol. 45 (6) , 795-811
A Review on Additive Manufacturing Process
- 1 February 2024
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Metallofizika i Noveishie Tekhnologii
- Vol. 45 (6) , 795-811
Open AccessA Review on Additive Manufacturing Process
- 29 November 2022
- Published by Springer Nature
- p. 69-77
A Review on Computational Techniques for Nanostructured Polymer Composite Materials
- 29 November 2022
- Published by Springer Nature
- p. 69-77
A Review on Computational Techniques for Nanostructured Polymer Composite Materials
- 10 November 2022
- Published by Taylor & Francis in Journal of the Chinese Institute of Engineers
- Vol. 46 (1) , 81-85
Role of traversing speed and axial load on the properties of friction stir welded dissimilar AA6101-T6 AND AA1350 aluminium alloys
Traditionally, AA6101-T6 and AA1350 aluminum alloys find prominent place in many industrial applications like electrical bus bar utilities for the sake of better conductivity. Friction Stir Welding is a non-traditional solid-state welding technique that was invented and developed by The Welding Institute. In this analysis, AA6101-T6 and AA1350 alloys have been put on experimentation with friction stir welding by varying axial load (5 kN to 9 kN) and traversing speed (60 mm/min to 120 mm/min). In order to examine the weld quality, properties such as tensile, wear and microstructural analyses have been carried out. From the results, it was observed that the weldment made with 7 kN axial load and 90 mm/min traversing speed exhibited better joint properties. Similarly, the weldment made with 5 kN axial load and 120 mm/min traversing speed exhibited poor joint properties. This has been attained due to the variations in heat input, metals softening and grain coarsening at weld nugget. Taguchi L9 orthogonal array with ANOVA and Signal to Noise ratio have been adopted to understand the contribution of axial load and traversing speed on the properties of weldments. Results reveal that traversing speed is statistically significant on the properties of weldment, when compared to axial load.
- 10 November 2022
- Published by Taylor & Francis in Journal of the Chinese Institute of Engineers
- Vol. 46 (1) , 81-85
Role of traversing speed and axial load on the properties of friction stir welded dissimilar AA6101-T6 AND AA1350 aluminium alloys
Traditionally, AA6101-T6 and AA1350 aluminum alloys find prominent place in many industrial applications like electrical bus bar utilities for the sake of better conductivity. Friction Stir Welding is a non-traditional solid-state welding technique that was invented and developed by The Welding Institute. In this analysis, AA6101-T6 and AA1350 alloys have been put on experimentation with friction stir welding by varying axial load (5 kN to 9 kN) and traversing speed (60 mm/min to 120 mm/min). In order to examine the weld quality, properties such as tensile, wear and microstructural analyses have been carried out. From the results, it was observed that the weldment made with 7 kN axial load and 90 mm/min traversing speed exhibited better joint properties. Similarly, the weldment made with 5 kN axial load and 120 mm/min traversing speed exhibited poor joint properties. This has been attained due to the variations in heat input, metals softening and grain coarsening at weld nugget. Taguchi L9 orthogonal array with ANOVA and Signal to Noise ratio have been adopted to understand the contribution of axial load and traversing speed on the properties of weldments. Results reveal that traversing speed is statistically significant on the properties of weldment, when compared to axial load.
- 20 May 2022
- Published by Wiley in Polymer Composites
- Vol. 43 (8) , 4942-4958
Extraction of cellulose nanocrystals from red banana peduncle agro‐waste and application in environmentally friendly biocomposite film
The agricultural waste dumped onto the land is creating an environmental problem. The conversion of those easily available agro‐wastes into value‐added nano reinforcement materials for biopolymers is an alternative method of waste utilization and minimization. In the current study, the red banana peduncle (RBP) waste was used as a precursor in the extraction of carboxylated cellulose nanocrystals (CCNCs) by alkalization, acidified chlorination citric acid hydrolysis, as well as the assessment of its reinforcing capability in polyvinyl alcohol. The characterization of the extracted CCNCs is analyzed through electron microscopy, X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), and Thermogravimetric analysis (TGA), respectively. The CCNCs exhibit a rod‐like shape (235 ± 20 nm length and 17.2 ± 6 nm width) with a high crystallinity of 89.7%, a negative zeta potential (−48 mV), and good thermal resistivity against degradation up to 280 °C. Furthermore, the effects of CCNCs integration on the bionanocomposite films' tensile, optical, bio decomposition, and thermal behavior were examined. The bionanocomposite film with improved physical, functional, thermal and bio decomposition characteristics offers the possibility for active packaging applications.
- 20 May 2022
- Published by Wiley in Polymer Composites
- Vol. 43 (8) , 4942-4958
Extraction of cellulose nanocrystals from red banana peduncle agro‐waste and application in environmentally friendly biocomposite film
The agricultural waste dumped onto the land is creating an environmental problem. The conversion of those easily available agro‐wastes into value‐added nano reinforcement materials for biopolymers is an alternative method of waste utilization and minimization. In the current study, the red banana peduncle (RBP) waste was used as a precursor in the extraction of carboxylated cellulose nanocrystals (CCNCs) by alkalization, acidified chlorination citric acid hydrolysis, as well as the assessment of its reinforcing capability in polyvinyl alcohol. The characterization of the extracted CCNCs is analyzed through electron microscopy, X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), and Thermogravimetric analysis (TGA), respectively. The CCNCs exhibit a rod‐like shape (235 ± 20 nm length and 17.2 ± 6 nm width) with a high crystallinity of 89.7%, a negative zeta potential (−48 mV), and good thermal resistivity against degradation up to 280 °C. Furthermore, the effects of CCNCs integration on the bionanocomposite films' tensile, optical, bio decomposition, and thermal behavior were examined. The bionanocomposite film with improved physical, functional, thermal and bio decomposition characteristics offers the possibility for active packaging applications.
- 5 June 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 47, 5194-5198
Characterization and analysis of Fe-Co based hybrid composites
- 5 June 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 47, 5194-5198
Characterization and analysis of Fe-Co based hybrid composites