Yaochun Yao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yaochun Yao has a total of 177 co-authors. Here are the top co-authors by number of shared publications:
Keyu Zhang
32 shared publicationsYin Li
Kunming University of Science and Technology
28 shared publicationsBin Yang
National Engineering Research Center of Vacuum Metallurgy, School of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, Yunnan province, China
27 shared publicationsJunxian Hu
20 shared publicationsGeng Gao
National Engineering Research Center of Vacuum Metallurgy, Faculty of Metallurgy and Energy Engineering
18 shared publicationsLi Wang
16 shared publications
Latest Publications
- 18 November 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (44) , 27659-27672
Structure and interaction of mixed ionic liquids with lithium using first-principles calculations
This study employs first-principles and ab initio molecular dynamics (AIMD) calculations to investigate the interactions between mixed ionic-liquid systems (ILs) and lithium-metal surfaces.
- 18 November 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (44) , 27659-27672
Structure and interaction of mixed ionic liquids with lithium using first-principles calculations
This study employs first-principles and ab initio molecular dynamics (AIMD) calculations to investigate the interactions between mixed ionic-liquid systems (ILs) and lithium-metal surfaces.
- Open Access
- 21 September 2026
- Published by Elsevier in SSRN Electronic Journal
Achieving excellent reversible lithium storage of iron (Ⅱ) oxalate-based anodes for full cell via gradient excessive pre-lithiation strategy
Iron(Ⅱ) oxalate (FCO) is a promising anode candidate for lithium-ion batteries, yet its high initial irreversible capacity and poor full-cell cycling stability severely hinder its practical deployment. Herein, based on the lithiation mechanistic understanding of FCO, we elucidate the underlying lithiation failure mechanism and demonstrate enhanced cycling stability in full cells through controlled electrochemical pre-lithiation with gradient excessive lithium replenishme. Following pre-lithiation, particle interface is covered by a composite layer containing inorganic lithium salts and organic species, which effectively ensures subsequent cycling stability. Through comparative to varying lithium replenishment depths, pre-lithiation potential of 0.2 V (vs. Li/Li+) can ensure the complete formation of solid electrolyte interphase (SEI) and conversion reactions, which prevents lithium plating and obstruction of ion diffusion channels resulting from interfacial lithium entrapment. Meanwhile, the reserved excess reversible lithium effectively reactivates agglomerated Fe0 particles generated during the initial conversion reaction, thereby guaranteeing stable electrochemical activity in lithium-limited full cells. The assembled pre-lithiated LCO||FCO/C full cell maintains a charge specific capacity exceeding 113 mAh g-1 after 200 cycles. This targeted pre-lithiation strategy offers an effective approach to mitigating rapid capacity fading in iron (Ⅱ) oxalate-based full cells.
- 21 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAchieving excellent reversible lithium storage of iron (Ⅱ) oxalate-based anodes for full cell via gradient excessive pre-lithiation strategy
Iron(Ⅱ) oxalate (FCO) is a promising anode candidate for lithium-ion batteries, yet its high initial irreversible capacity and poor full-cell cycling stability severely hinder its practical deployment. Herein, based on the lithiation mechanistic understanding of FCO, we elucidate the underlying lithiation failure mechanism and demonstrate enhanced cycling stability in full cells through controlled electrochemical pre-lithiation with gradient excessive lithium replenishme. Following pre-lithiation, particle interface is covered by a composite layer containing inorganic lithium salts and organic species, which effectively ensures subsequent cycling stability. Through comparative to varying lithium replenishment depths, pre-lithiation potential of 0.2 V (vs. Li/Li+) can ensure the complete formation of solid electrolyte interphase (SEI) and conversion reactions, which prevents lithium plating and obstruction of ion diffusion channels resulting from interfacial lithium entrapment. Meanwhile, the reserved excess reversible lithium effectively reactivates agglomerated Fe0 particles generated during the initial conversion reaction, thereby guaranteeing stable electrochemical activity in lithium-limited full cells. The assembled pre-lithiated LCO||FCO/C full cell maintains a charge specific capacity exceeding 113 mAh g-1 after 200 cycles. This targeted pre-lithiation strategy offers an effective approach to mitigating rapid capacity fading in iron (Ⅱ) oxalate-based full cells.
- 3 September 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (37) , 16698-16710
Ultrasound-Driven Interfacial-Electrochemical-Radical Synergistic Pathways for Reclaiming Fe/P from Refractory Ferrophosphorus Residue
Recovering iron and phosphorus from ferrophosphorus residue enables by-product valorization. However, the presence of stable metal phosphides severely hinders conventional leaching, leading to prolonged processing times and substantial waste generation. To address these challenges, this study first subjects the ferrophosphorus residue to high-temperature activation pretreatment, followed by ultrasound-enhanced sulfuric acid/hydrogen peroxide leaching, to achieve efficient recovery of Fe and P. Under optimum conditions, the leaching percentages of iron and phosphorus reach 93.21 and 87.15%, corresponding to absolute increases of 23.26 and 12.05%, respectively, over conventional methods. Kinetic modeling indicates an apparent activation energy reduction of 14.26 kJ/mol, confirming that ultrasonic irradiation lowers the reaction’s energy threshold. Surface energetic evaluations show a 7.91° decrease in water contact angle and a concurrent 5.38 mJ/m2 augmentation of solid surface free energy. This improves wettability, optimizes solid-liquid interfacial kinetics, and reduces mass transfer resistance. Furthermore, Tafel plots reveal a 0.063 V (vs. MSE) cathodic shift in corrosion potential alongside an 8.431 × 10–5 A/cm2 elevation in corrosion current density. Acoustic micro-jets clean the residue surface to maintain high reactivity, while EPR analysis confirms the accelerated generation of ·OH and SO4–· radicals. This radical generation elevates the system’s oxidative capacity, facilitating residue leaching. This work provides a new perspective for applying ultrasonic technology to recover valuable elements from ferrophosphorus residue.
- 3 September 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (37) , 16698-16710
Ultrasound-Driven Interfacial-Electrochemical-Radical Synergistic Pathways for Reclaiming Fe/P from Refractory Ferrophosphorus Residue
Recovering iron and phosphorus from ferrophosphorus residue enables by-product valorization. However, the presence of stable metal phosphides severely hinders conventional leaching, leading to prolonged processing times and substantial waste generation. To address these challenges, this study first subjects the ferrophosphorus residue to high-temperature activation pretreatment, followed by ultrasound-enhanced sulfuric acid/hydrogen peroxide leaching, to achieve efficient recovery of Fe and P. Under optimum conditions, the leaching percentages of iron and phosphorus reach 93.21 and 87.15%, corresponding to absolute increases of 23.26 and 12.05%, respectively, over conventional methods. Kinetic modeling indicates an apparent activation energy reduction of 14.26 kJ/mol, confirming that ultrasonic irradiation lowers the reaction’s energy threshold. Surface energetic evaluations show a 7.91° decrease in water contact angle and a concurrent 5.38 mJ/m2 augmentation of solid surface free energy. This improves wettability, optimizes solid-liquid interfacial kinetics, and reduces mass transfer resistance. Furthermore, Tafel plots reveal a 0.063 V (vs. MSE) cathodic shift in corrosion potential alongside an 8.431 × 10–5 A/cm2 elevation in corrosion current density. Acoustic micro-jets clean the residue surface to maintain high reactivity, while EPR analysis confirms the accelerated generation of ·OH and SO4–· radicals. This radical generation elevates the system’s oxidative capacity, facilitating residue leaching. This work provides a new perspective for applying ultrasonic technology to recover valuable elements from ferrophosphorus residue.
- 30 July 2026
- Published by Elsevier in Electrochimica Acta
- Vol. 576
Sodium-ion storage mechanism of hierarchical Bi2SiO5/rGO nanoflower
- 30 July 2026
- Published by Elsevier in Electrochimica Acta
- Vol. 576
Sodium-ion storage mechanism of hierarchical Bi2SiO5/rGO nanoflower
- Open Access
- 29 July 2026
- Published by Elsevier in SSRN Electronic Journal
Polyvinylpyrrolidone-Derived Nitrogen-Doped Carbon as an Iodine Cathode Host for Aqueous Zinc-Iodine Batteries
Aqueous zinc-iodine batteries (AZIBs) have the advantages of high safety, low cost, and environmental friendliness, but face challenges in practical applications such as severe polyiodide shuttle effects, poor electrical properties of iodine, and slow redox kinetics. To overcome these obstacles, this study used polyvinylpyrrolidone (PVP) as a carbon/nitrogen source to successfully synthesize nitrogen-doped microporous carbon nanosheets (NC-T) through a freeze-drying and high-temperature pyrolysis strategy. Results show that NC-650 prepared at 650°C has an ultra-high specific surface area of 992.74 m² g⁻¹ and a rich micropore distribution (1-2 nm), providing ample physical confinement space for iodine molecules and effectively buffering their volume expansion. In addition, in-situ doped active nitrogen sites enhance the adsorption of polyiodides through strong chemical anchoring effects and significantly improve interfacial charge transfer rates. Electrochemical performance evaluation shows that NC-650/I2 exhibits a high specific capacity of 161.49 mAh g⁻¹ at a current density of 0.1 A g⁻¹ and excellent rate performance. Remarkably, after 3000 cycles at a high current of 1.0 A g⁻¹, the battery can still retain 83.6% of its initial capacity, with the coulombic efficiency consistently close to 100%. This study provides a new design idea for developing long-life, highly stable, high-performance AZIBs through microstructural adjustment and chemical active site design.
- 29 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPolyvinylpyrrolidone-Derived Nitrogen-Doped Carbon as an Iodine Cathode Host for Aqueous Zinc-Iodine Batteries
Aqueous zinc-iodine batteries (AZIBs) have the advantages of high safety, low cost, and environmental friendliness, but face challenges in practical applications such as severe polyiodide shuttle effects, poor electrical properties of iodine, and slow redox kinetics. To overcome these obstacles, this study used polyvinylpyrrolidone (PVP) as a carbon/nitrogen source to successfully synthesize nitrogen-doped microporous carbon nanosheets (NC-T) through a freeze-drying and high-temperature pyrolysis strategy. Results show that NC-650 prepared at 650°C has an ultra-high specific surface area of 992.74 m² g⁻¹ and a rich micropore distribution (1-2 nm), providing ample physical confinement space for iodine molecules and effectively buffering their volume expansion. In addition, in-situ doped active nitrogen sites enhance the adsorption of polyiodides through strong chemical anchoring effects and significantly improve interfacial charge transfer rates. Electrochemical performance evaluation shows that NC-650/I2 exhibits a high specific capacity of 161.49 mAh g⁻¹ at a current density of 0.1 A g⁻¹ and excellent rate performance. Remarkably, after 3000 cycles at a high current of 1.0 A g⁻¹, the battery can still retain 83.6% of its initial capacity, with the coulombic efficiency consistently close to 100%. This study provides a new design idea for developing long-life, highly stable, high-performance AZIBs through microstructural adjustment and chemical active site design.
- Open Access
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Polyvinylpyrrolidone-Derived Nitrogen-Doped Carbon as an Iodine Cathode Host for Aqueous Zinc-Iodine Batteries
Aqueous zinc-iodine batteries (AZIBs) have the advantages of high safety, low cost, and environmental friendliness, but face challenges in practical applications such as severe polyiodide shuttle effects, poor electrical properties of iodine, and slow redox kinetics. To overcome these obstacles, this study used polyvinylpyrrolidone (PVP) as a carbon/nitrogen source to successfully synthesize nitrogen-doped microporous carbon nanosheets (NC-T) through a freeze-drying and high-temperature pyrolysis strategy. Results show that NC-650 prepared at 650°C has an ultra-high specific surface area of 992.74 m² g⁻¹ and a rich micropore distribution (1-2 nm), providing ample physical confinement space for iodine molecules and effectively buffering their volume expansion. In addition, in-situ doped active nitrogen sites enhance the adsorption of polyiodides through strong chemical anchoring effects and significantly improve interfacial charge transfer rates. Electrochemical performance evaluation shows that NC-650/I2 exhibits a high specific capacity of 161.49 mAh g⁻¹ at a current density of 0.1 A g⁻¹ and excellent rate performance. Remarkably, after 3000 cycles at a high current of 1.0 A g⁻¹, the battery can still retain 83.6% of its initial capacity, with the coulombic efficiency consistently close to 100%. This study provides a new design idea for developing long-life, highly stable, high-performance AZIBs through microstructural adjustment and chemical active site design.
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPolyvinylpyrrolidone-Derived Nitrogen-Doped Carbon as an Iodine Cathode Host for Aqueous Zinc-Iodine Batteries
Aqueous zinc-iodine batteries (AZIBs) have the advantages of high safety, low cost, and environmental friendliness, but face challenges in practical applications such as severe polyiodide shuttle effects, poor electrical properties of iodine, and slow redox kinetics. To overcome these obstacles, this study used polyvinylpyrrolidone (PVP) as a carbon/nitrogen source to successfully synthesize nitrogen-doped microporous carbon nanosheets (NC-T) through a freeze-drying and high-temperature pyrolysis strategy. Results show that NC-650 prepared at 650°C has an ultra-high specific surface area of 992.74 m² g⁻¹ and a rich micropore distribution (1-2 nm), providing ample physical confinement space for iodine molecules and effectively buffering their volume expansion. In addition, in-situ doped active nitrogen sites enhance the adsorption of polyiodides through strong chemical anchoring effects and significantly improve interfacial charge transfer rates. Electrochemical performance evaluation shows that NC-650/I2 exhibits a high specific capacity of 161.49 mAh g⁻¹ at a current density of 0.1 A g⁻¹ and excellent rate performance. Remarkably, after 3000 cycles at a high current of 1.0 A g⁻¹, the battery can still retain 83.6% of its initial capacity, with the coulombic efficiency consistently close to 100%. This study provides a new design idea for developing long-life, highly stable, high-performance AZIBs through microstructural adjustment and chemical active site design.
- Open Access
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Polyvinylpyrrolidone-Derived Nitrogen-Doped Carbon as an Iodine Cathode Host for Aqueous Zinc-Iodine Batteries
Aqueous zinc-iodine batteries (AZIBs) have the advantages of high safety, low cost, and environmental friendliness, but face challenges in practical applications such as severe polyiodide shuttle effects, poor electrical properties of iodine, and slow redox kinetics. To overcome these obstacles, this study used polyvinylpyrrolidone (PVP) as a carbon/nitrogen source to successfully synthesize nitrogen-doped microporous carbon nanosheets (NC-T) through a freeze-drying and high-temperature pyrolysis strategy. Results show that NC-650 prepared at 650°C has an ultra-high specific surface area of 992.74 m² g⁻¹ and a rich micropore distribution (1-2 nm), providing ample physical confinement space for iodine molecules and effectively buffering their volume expansion. In addition, in-situ doped active nitrogen sites enhance the adsorption of polyiodides through strong chemical anchoring effects and significantly improve interfacial charge transfer rates. Electrochemical performance evaluation shows that NC-650/I2 exhibits a high specific capacity of 161.49 mAh g⁻¹ at a current density of 0.1 A g⁻¹ and excellent rate performance. Remarkably, after 3000 cycles at a high current of 1.0 A g⁻¹, the battery can still retain 83.6% of its initial capacity, with the coulombic efficiency consistently close to 100%. This study provides a new design idea for developing long-life, highly stable, high-performance AZIBs through microstructural adjustment and chemical active site design.
- 7 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPolyvinylpyrrolidone-Derived Nitrogen-Doped Carbon as an Iodine Cathode Host for Aqueous Zinc-Iodine Batteries
Aqueous zinc-iodine batteries (AZIBs) have the advantages of high safety, low cost, and environmental friendliness, but face challenges in practical applications such as severe polyiodide shuttle effects, poor electrical properties of iodine, and slow redox kinetics. To overcome these obstacles, this study used polyvinylpyrrolidone (PVP) as a carbon/nitrogen source to successfully synthesize nitrogen-doped microporous carbon nanosheets (NC-T) through a freeze-drying and high-temperature pyrolysis strategy. Results show that NC-650 prepared at 650°C has an ultra-high specific surface area of 992.74 m² g⁻¹ and a rich micropore distribution (1-2 nm), providing ample physical confinement space for iodine molecules and effectively buffering their volume expansion. In addition, in-situ doped active nitrogen sites enhance the adsorption of polyiodides through strong chemical anchoring effects and significantly improve interfacial charge transfer rates. Electrochemical performance evaluation shows that NC-650/I2 exhibits a high specific capacity of 161.49 mAh g⁻¹ at a current density of 0.1 A g⁻¹ and excellent rate performance. Remarkably, after 3000 cycles at a high current of 1.0 A g⁻¹, the battery can still retain 83.6% of its initial capacity, with the coulombic efficiency consistently close to 100%. This study provides a new design idea for developing long-life, highly stable, high-performance AZIBs through microstructural adjustment and chemical active site design.
- 7 July 2026
- Published by World Scientific Pub Co Pte Ltd in Nano
Interconnected Porous Aggregate Structure α-Fe 2 O 3 Prepared from Iron-Concentrate Leaching Solution as Anode Material for Lithium-Ion Batteries
A straightforward chemical precipitation technique is used to synthesize interconnected [ ]-Fe 2 O 3 particles, utilizing sulfuric acid leaching liquor from iron concentrate as the iron source. This study extensively explores the influence of various precipitants such as sodium carbonate, sodium hydroxide and ammonia on the microstructure and lithium storage abilities of the produced [ ]-Fe 2 O 3 . All [ ]-Fe 2 O 3 samples exhibit an interconnected porous aggregate structure, with particle sizes varying between 8[ ][ ]m and 12[ ][ ]m. Among the [ ]-Fe 2 O 3 samples, the sample prepared using sodium carbonate as the precipitating agent (FO-1) exhibits the best electrochemical performance as an anode material for LIBs. Following 200 cycles at 0.5 A g[ ], the FO-1 electrode demonstrates a reversible discharge capacity of 1270.92[ ]mAh g[ ]. At a current density of 5 A g[ ], the FO-1 electrode still holds a reversible discharge capacity of 411.1[ ]mAh g[ ]. The superior electrochemical performance of sample FO-1 is linked to its decreased average particle size, facilitating the creation of more active sites, boosting cycling stability and shortening ion diffusion distances. The results of this research provide crucial understanding for the efficient utilization of iron concentrate.
- 7 July 2026
- Published by World Scientific Pub Co Pte Ltd in Nano
Interconnected Porous Aggregate Structure α-Fe 2 O 3 Prepared from Iron-Concentrate Leaching Solution as Anode Material for Lithium-Ion Batteries
A straightforward chemical precipitation technique is used to synthesize interconnected [ ]-Fe 2 O 3 particles, utilizing sulfuric acid leaching liquor from iron concentrate as the iron source. This study extensively explores the influence of various precipitants such as sodium carbonate, sodium hydroxide and ammonia on the microstructure and lithium storage abilities of the produced [ ]-Fe 2 O 3 . All [ ]-Fe 2 O 3 samples exhibit an interconnected porous aggregate structure, with particle sizes varying between 8[ ][ ]m and 12[ ][ ]m. Among the [ ]-Fe 2 O 3 samples, the sample prepared using sodium carbonate as the precipitating agent (FO-1) exhibits the best electrochemical performance as an anode material for LIBs. Following 200 cycles at 0.5 A g[ ], the FO-1 electrode demonstrates a reversible discharge capacity of 1270.92[ ]mAh g[ ]. At a current density of 5 A g[ ], the FO-1 electrode still holds a reversible discharge capacity of 411.1[ ]mAh g[ ]. The superior electrochemical performance of sample FO-1 is linked to its decreased average particle size, facilitating the creation of more active sites, boosting cycling stability and shortening ion diffusion distances. The results of this research provide crucial understanding for the efficient utilization of iron concentrate.
- 25 June 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (26) , 18880-18892
Bypassing First-Stage Degradation via Preconversion Interface Engineering in Iron Oxalate Anodes
Oxalate-based anodes are attractive high-capacity candidates for lithium-ion batteries, but their practical application is hindered by severe first-stage degradation during early cycling. Here, combined experimental and theoretical analyses suggest that the early-stage irreversibility of iron oxalate is driven by interfacial chemical degradation of oxalate groups, with possible mechanical damage accelerating failure by exposing fresh reactive surfaces. Guided by this mechanism, we develop a preconversion interfacial engineering strategy by thermochemically preforming an FeOx passivation layer on the surface of iron oxalate and other functional components are incorporated prior to cycling. The resulting FeOx layer passivates reactive oxalate groups and regulates the interfacial chemistry of the iron oxalate particles. Meanwhile, auxiliary functional components, including the conductive graphite framework and elastic polyacrylonitrile shell, may enhance the charge transport and accommodate volume variation. As a result, the engineered electrode delivers a second-cycle Coulombic efficiency of 92% and 96% capacity retention over the first six cycles, significantly outperforming that of pristine iron oxalate (75% and 68%, respectively). At 0.5 A g–1, it retains 897 mAh g–1 after 100 cycles and 1053 mAh g–1 after 300 cycles. This work establishes a preconversion interfacial passivation strategy for stabilizing chemically reactive oxalate-based conversion anodes.
- 25 June 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (26) , 18880-18892
Bypassing First-Stage Degradation via Preconversion Interface Engineering in Iron Oxalate Anodes
Oxalate-based anodes are attractive high-capacity candidates for lithium-ion batteries, but their practical application is hindered by severe first-stage degradation during early cycling. Here, combined experimental and theoretical analyses suggest that the early-stage irreversibility of iron oxalate is driven by interfacial chemical degradation of oxalate groups, with possible mechanical damage accelerating failure by exposing fresh reactive surfaces. Guided by this mechanism, we develop a preconversion interfacial engineering strategy by thermochemically preforming an FeOx passivation layer on the surface of iron oxalate and other functional components are incorporated prior to cycling. The resulting FeOx layer passivates reactive oxalate groups and regulates the interfacial chemistry of the iron oxalate particles. Meanwhile, auxiliary functional components, including the conductive graphite framework and elastic polyacrylonitrile shell, may enhance the charge transport and accommodate volume variation. As a result, the engineered electrode delivers a second-cycle Coulombic efficiency of 92% and 96% capacity retention over the first six cycles, significantly outperforming that of pristine iron oxalate (75% and 68%, respectively). At 0.5 A g–1, it retains 897 mAh g–1 after 100 cycles and 1053 mAh g–1 after 300 cycles. This work establishes a preconversion interfacial passivation strategy for stabilizing chemically reactive oxalate-based conversion anodes.
- 10 June 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (26) , 11147-11161
Recycling of spent LiFePO 4 batteries with an acid-free process to high-rate Na 2 FeP 2 O 7 @C cathodes for sodium-ion storage
The escalating retirement of lithium iron phosphate (LiFePO 4 , LFP) batteries necessitates the development of sustainable recycling strategies that avoid traditional acid/alkali consumption and secondary pollution.
- 10 June 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (26) , 11147-11161
Recycling of spent LiFePO 4 batteries with an acid-free process to high-rate Na 2 FeP 2 O 7 @C cathodes for sodium-ion storage
The escalating retirement of lithium iron phosphate (LiFePO 4 , LFP) batteries necessitates the development of sustainable recycling strategies that avoid traditional acid/alkali consumption and secondary pollution.