Tulga Ersal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tulga Ersal has a total of 125 co-authors. Here are the top co-authors by number of shared publications:
Jeffrey L. Stein
Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI, USA
31 shared publications- Jeffrey L. Stein
Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI 48109
14 shared publications Paramsothy Jayakumar
U.S. Army Ground Vehicle Systems Center, Warren, MI, USA
11 shared publicationsHosam K. Fathy
10 shared publications- Mark J. Brudnak
U.S. Army Combat Capabilities Development Command, Ground Vehicle Systems Center, Warren, MI, USA
8 shared publications - Xinyi Ge
Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI, USA
6 shared publications
Latest Publications
- 1 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 34 (3) , 1106-1121
Real-Time Topology-Aware Local Planning and Control for Off-Road Vehicles on 3-D Terrains
A novel topology-aware model predictive control (MPC) framework is presented for navigating off-road wheeled vehicles with extreme mobility on 3-D terrains. Prior studies have oversimplified the problem by either treating it solely as a path-planning problem or disregarding the terrain topology. To bridge this gap, this article presents a one-layer model predictive planning and control framework that considers terrain topology for off-road vehicles at operationally relevant speeds. The algorithm is tested in various simulated scenarios with comparisons to benchmarks. The proposed algorithm demonstrates superior performance by capturing the dynamic constraints, while the benchmarks either fail to complete tasks or exhibit inferior performance due to inaccurate representation of the dynamic limitations of the vehicle. Furthermore, the algorithm is tested for robustness to demonstrate its ability to handle uncertainties in terrain topology.
- 1 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 34 (3) , 1106-1121
Real-Time Topology-Aware Local Planning and Control for Off-Road Vehicles on 3-D Terrains
A novel topology-aware model predictive control (MPC) framework is presented for navigating off-road wheeled vehicles with extreme mobility on 3-D terrains. Prior studies have oversimplified the problem by either treating it solely as a path-planning problem or disregarding the terrain topology. To bridge this gap, this article presents a one-layer model predictive planning and control framework that considers terrain topology for off-road vehicles at operationally relevant speeds. The algorithm is tested in various simulated scenarios with comparisons to benchmarks. The proposed algorithm demonstrates superior performance by capturing the dynamic constraints, while the benchmarks either fail to complete tasks or exhibit inferior performance due to inaccurate representation of the dynamic limitations of the vehicle. Furthermore, the algorithm is tested for robustness to demonstrate its ability to handle uncertainties in terrain topology.
- Open Access
Spatial Envelope MPC: High Performance Driving without a Reference
This paper presents a novel envelope based model predictive control (MPC) framework designed to enable autonomous vehicles to handle high performance driving across a wide range of scenarios without a predefined reference. In high performance autonomous driving, safe operation at the vehicle's dynamic limits requires a real time planning and control framework capable of accounting for key vehicle dynamics and environmental constraints when following a predefined reference trajectory is suboptimal or even infeasible. State of the art planning and control frameworks, however, are predominantly reference based, which limits their performance in such situations. To address this gap, this work first introduces a computationally efficient vehicle dynamics model tailored for optimization based control and a continuously differentiable mathematical formulation that accurately captures the entire drivable envelope. This novel model and formulation allow for the direct integration of dynamic feasibility and safety constraints into a unified planning and control framework, thereby removing the necessity for predefined references. The challenge of envelope planning, which refers to maximally approximating the safe drivable area, is tackled by combining reinforcement learning with optimization techniques. The framework is validated through both simulations and real world experiments, demonstrating its high performance across a variety of tasks, including racing, emergency collision avoidance and off road navigation. These results highlight the framework's scalability and broad applicability across a diverse set of scenarios.
Open AccessSpatial Envelope MPC: High Performance Driving without a Reference
This paper presents a novel envelope based model predictive control (MPC) framework designed to enable autonomous vehicles to handle high performance driving across a wide range of scenarios without a predefined reference. In high performance autonomous driving, safe operation at the vehicle's dynamic limits requires a real time planning and control framework capable of accounting for key vehicle dynamics and environmental constraints when following a predefined reference trajectory is suboptimal or even infeasible. State of the art planning and control frameworks, however, are predominantly reference based, which limits their performance in such situations. To address this gap, this work first introduces a computationally efficient vehicle dynamics model tailored for optimization based control and a continuously differentiable mathematical formulation that accurately captures the entire drivable envelope. This novel model and formulation allow for the direct integration of dynamic feasibility and safety constraints into a unified planning and control framework, thereby removing the necessity for predefined references. The challenge of envelope planning, which refers to maximally approximating the safe drivable area, is tackled by combining reinforcement learning with optimization techniques. The framework is validated through both simulations and real world experiments, demonstrating its high performance across a variety of tasks, including racing, emergency collision avoidance and off road navigation. These results highlight the framework's scalability and broad applicability across a diverse set of scenarios.
- 31 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 26 (3) , 3324-3340
A Real-Time Terrain-Adaptive Local Trajectory Planner for High-Speed Autonomous Off-Road Navigation on Deformable Terrains
This paper presents a novel terrain-adaptive local trajectory planner designed for the autonomous operation of off-road vehicles on deformable terrains. State-of-the-art solutions either do not account for deformable terrains, or do not offer sufficient robustness or computational speed. To bridge this research gap, the paper introduces a novel model predictive control (MPC) formulation. In contrast to the prevailing state-of-the-art approaches that rely exclusively on hard or soft constraints for obstacle avoidance, the present formulation enhances robustness by incorporating both types of constraints. The effectiveness and robustness of the formulation are evaluated through extensive simulations, encompassing a wide range of randomized scenarios, and compared against state-of-the-art methods. Subsequently, the formulation is augmented with an optimal-control-oriented terramechanics model from the literature, explicitly addressing terrain deformation. Additionally, a terrain estimator employing the unscented Kalman filter is utilized to dynamically adjust the sinkage exponent online, resulting in a terrain-adaptive formulation. This formulation is tested on a physical vehicle in real world experiments against a rigid-terrain formulation as the benchmark. The results showcase the superior safety and performance achieved by the proposed formulation, underscoring the critical significance of integrating terramechanics knowledge into the planning process. Specifically, the proposed terrain-adaptive formulation achieves reduced mean absolute sideslip angle, decreased mean absolute yaw rate, shorter time to goal, and a higher success rate, primarily attributed to its enhanced understanding of terramechanics within the planner.
- 31 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 26 (3) , 3324-3340
A Real-Time Terrain-Adaptive Local Trajectory Planner for High-Speed Autonomous Off-Road Navigation on Deformable Terrains
This paper presents a novel terrain-adaptive local trajectory planner designed for the autonomous operation of off-road vehicles on deformable terrains. State-of-the-art solutions either do not account for deformable terrains, or do not offer sufficient robustness or computational speed. To bridge this research gap, the paper introduces a novel model predictive control (MPC) formulation. In contrast to the prevailing state-of-the-art approaches that rely exclusively on hard or soft constraints for obstacle avoidance, the present formulation enhances robustness by incorporating both types of constraints. The effectiveness and robustness of the formulation are evaluated through extensive simulations, encompassing a wide range of randomized scenarios, and compared against state-of-the-art methods. Subsequently, the formulation is augmented with an optimal-control-oriented terramechanics model from the literature, explicitly addressing terrain deformation. Additionally, a terrain estimator employing the unscented Kalman filter is utilized to dynamically adjust the sinkage exponent online, resulting in a terrain-adaptive formulation. This formulation is tested on a physical vehicle in real world experiments against a rigid-terrain formulation as the benchmark. The results showcase the superior safety and performance achieved by the proposed formulation, underscoring the critical significance of integrating terramechanics knowledge into the planning process. Specifically, the proposed terrain-adaptive formulation achieves reduced mean absolute sideslip angle, decreased mean absolute yaw rate, shorter time to goal, and a higher success rate, primarily attributed to its enhanced understanding of terramechanics within the planner.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 40 (15523098) , 1309-1326
An Efficient Global Trajectory Planner for Highly Dynamical Nonholonomic Autonomous Vehicles on 3-D Terrains
A novel hierarchical global trajectory planner is presented to allow highly dynamical nonholonomic off-road autonomous vehicles to achieve high mobility on 3D terrains. On complex terrains with uneven topology, designing safe and feasible vehicle trajectories often demands an understanding of the vehicle's dynamical and nonholonomic constraints. Prior research, however, treats the global planning problem as a path planning problem without effectively accounting for topology or dynamical constraints. To address this gap, this paper presents a three-phase trajectory planning algorithm composed of an A*, a rapidly exploring random tree (RRT), and a local trajectory refining (LTR) phase to incorporate dynamical and nonholonomic constraints on uneven terrain. The algorithm is tested in scenarios with randomized terrain fields and obstacles to demonstrate the necessity for all three phases. The algorithm is shown to have lower cost, higher success rate, and higher computational efficiency compared to state-of-the-art methods. The algorithm is then tested by controlling a simulated MRZR vehicle on a 3D terrain along with a local controller, with comparisons to state-of-the-art algorithms. It is demonstrated that the new algorithm is capable of planning dynamically feasible trajectories with lower cost where the state-of-the-art algorithms fail to perform due to neglecting dynamical vehicle limitations.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 40 (15523098) , 1309-1326
An Efficient Global Trajectory Planner for Highly Dynamical Nonholonomic Autonomous Vehicles on 3-D Terrains
A novel hierarchical global trajectory planner is presented to allow highly dynamical nonholonomic off-road autonomous vehicles to achieve high mobility on 3D terrains. On complex terrains with uneven topology, designing safe and feasible vehicle trajectories often demands an understanding of the vehicle's dynamical and nonholonomic constraints. Prior research, however, treats the global planning problem as a path planning problem without effectively accounting for topology or dynamical constraints. To address this gap, this paper presents a three-phase trajectory planning algorithm composed of an A*, a rapidly exploring random tree (RRT), and a local trajectory refining (LTR) phase to incorporate dynamical and nonholonomic constraints on uneven terrain. The algorithm is tested in scenarios with randomized terrain fields and obstacles to demonstrate the necessity for all three phases. The algorithm is shown to have lower cost, higher success rate, and higher computational efficiency compared to state-of-the-art methods. The algorithm is then tested by controlling a simulated MRZR vehicle on a 3D terrain along with a local controller, with comparisons to state-of-the-art algorithms. It is demonstrated that the new algorithm is capable of planning dynamically feasible trajectories with lower cost where the state-of-the-art algorithms fail to perform due to neglecting dynamical vehicle limitations.
- Open Access
Terrain Characterization via Machine vs. Deep Learning Using Remote Sensing
Terrain traversability is critical for developing Go/No-Go maps for ground vehicles, which significantly impact a mission’s success. To predict the mobility of terrain, one must understand the soil characteristics. In-situ measurements performed in the field are the current method of collecting this information, which is time-consuming, costly, and can be lethal for military operations. This paper investigates an alternative approach using thermal, multispectral, and hyperspectral remote sensing from an unmanned aerial vehicle (UAV) platform. Remotely sensed data combined with machine learning (linear, ridge, lasso, partial least squares (PLS), support vector machines (SVM), and k nearest neighbors (KNN)) and deep learning (multi-layer perceptron (MLP) and convolutional neural network (CNN)) are used to perform a comparative study to estimate the soil properties, such as the soil moisture and terrain strength, used to generate prediction maps of these terrain characteristics. This study found that deep learning outperformed machine learning. Specifically, a multi-layer perceptron performed the best for predicting the percent moisture content (R2/RMSE = 0.97/1.55) and the soil strength (in PSI), as measured by a cone penetrometer for the averaged 0–6” (CP06) (R2/RMSE = 0.95/67) and 0–12” depth (CP12) (R2/RMSE = 0.92/94). A Polaris MRZR vehicle was used to test the application of these prediction maps for mobility purposes, and correlations were observed between the CP06 and the rear wheel slip and the CP12 and the vehicle speed. Thus, this study demonstrates the potential of a more rapid, cost-efficient, and safer approach to predict terrain properties for mobility mapping using remote sensing data with machine and deep learning algorithms.
Open AccessTerrain Characterization via Machine vs. Deep Learning Using Remote Sensing
Terrain traversability is critical for developing Go/No-Go maps for ground vehicles, which significantly impact a mission’s success. To predict the mobility of terrain, one must understand the soil characteristics. In-situ measurements performed in the field are the current method of collecting this information, which is time-consuming, costly, and can be lethal for military operations. This paper investigates an alternative approach using thermal, multispectral, and hyperspectral remote sensing from an unmanned aerial vehicle (UAV) platform. Remotely sensed data combined with machine learning (linear, ridge, lasso, partial least squares (PLS), support vector machines (SVM), and k nearest neighbors (KNN)) and deep learning (multi-layer perceptron (MLP) and convolutional neural network (CNN)) are used to perform a comparative study to estimate the soil properties, such as the soil moisture and terrain strength, used to generate prediction maps of these terrain characteristics. This study found that deep learning outperformed machine learning. Specifically, a multi-layer perceptron performed the best for predicting the percent moisture content (R2/RMSE = 0.97/1.55) and the soil strength (in PSI), as measured by a cone penetrometer for the averaged 0–6” (CP06) (R2/RMSE = 0.95/67) and 0–12” depth (CP12) (R2/RMSE = 0.92/94). A Polaris MRZR vehicle was used to test the application of these prediction maps for mobility purposes, and correlations were observed between the CP06 and the rear wheel slip and the CP12 and the vehicle speed. Thus, this study demonstrates the potential of a more rapid, cost-efficient, and safer approach to predict terrain properties for mobility mapping using remote sensing data with machine and deep learning algorithms.
- 21 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (8) , 9922-9937
Pulse-and-Glide Operations for Hybrid Electric Vehicles in the Car-Following Scenario
This paper is focused on the pulse-and-glide (PnG) control for a parallel hybrid electric vehicle (HEV) in car-following. PnG is an eco-driving technique that alternately turns on and off the engine to save fuel. For HEVs, the ride comfort concerns by PnG in conventional vehicles can be alleviated by oscillating the battery state of charge (SOC), instead of the vehicle speed. However, due to the ohmic losses during the battery charging and discharging process, the fuel saving potential is much reduced. In order to reach a balance between ride comfort and fuel economy, a control method is proposed to utilize both the vehicle body and the battery as the energy buffers simultaneously in the PnG operation. In particular, two minimum-time control problems, one for the pulsing phase and another for the gliding phase, are formulated and implemented as model predictive control (MPC). With the applications of a series of approximations and sparsity optimization techniques, these two control problems become quadratic programming (QP) problems after the application of the pseudo-spectral (PS) method. The online implementability is thus ensured. Numerical simulations using naturalistic driving data show on average 17.1% and 5.1% improvements of fuel economy for local and highway speeds, respectively. It is shown that the proposed method is able to improve the fuel economy while maintaining both ride comfort and SOC sustenance.
- 21 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 72 (8) , 9922-9937
Pulse-and-Glide Operations for Hybrid Electric Vehicles in the Car-Following Scenario
This paper is focused on the pulse-and-glide (PnG) control for a parallel hybrid electric vehicle (HEV) in car-following. PnG is an eco-driving technique that alternately turns on and off the engine to save fuel. For HEVs, the ride comfort concerns by PnG in conventional vehicles can be alleviated by oscillating the battery state of charge (SOC), instead of the vehicle speed. However, due to the ohmic losses during the battery charging and discharging process, the fuel saving potential is much reduced. In order to reach a balance between ride comfort and fuel economy, a control method is proposed to utilize both the vehicle body and the battery as the energy buffers simultaneously in the PnG operation. In particular, two minimum-time control problems, one for the pulsing phase and another for the gliding phase, are formulated and implemented as model predictive control (MPC). With the applications of a series of approximations and sparsity optimization techniques, these two control problems become quadratic programming (QP) problems after the application of the pseudo-spectral (PS) method. The online implementability is thus ensured. Numerical simulations using naturalistic driving data show on average 17.1% and 5.1% improvements of fuel economy for local and highway speeds, respectively. It is shown that the proposed method is able to improve the fuel economy while maintaining both ride comfort and SOC sustenance.
- 4 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 24 (1) , 827-837
Loss Function Design for Data-Driven Predictors to Enhance the Energy Efficiency of Connected and Automated Vehicles
In car-following scenarios, accurate previews of the preceding vehicle’s trajectory are essential for minimizing the energy consumption of a following automated vehicle. This work presents a novel design strategy for data-driven vehicle speed predictors to increase the energy efficiency of the following connected and automated vehicle. The loss function is formulated as a weighted-mean-squared error, where the weights are tuned based on the influence of uncertainty at an individual prediction step on the energy consumption of the automated following vehicle. The efficacy of the proposed loss function is validated by applying it to training representative predictors and testing the predictors in the energy-optimal control of the following vehicle. The energy saving of the optimal controller is evaluated by comparing the electricity consumption of a battery electric vehicle with the human driver following, emulated by an intelligent driver model. Simulation results show that the energy consumption of an electric vehicle is reduced by an average of 12% compared to a human driver following demonstrated by an intelligent driver model, whereas using a conventional loss function, a mean-squared error loss function, reduces by 10%.
- 4 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 24 (1) , 827-837
Loss Function Design for Data-Driven Predictors to Enhance the Energy Efficiency of Connected and Automated Vehicles
In car-following scenarios, accurate previews of the preceding vehicle’s trajectory are essential for minimizing the energy consumption of a following automated vehicle. This work presents a novel design strategy for data-driven vehicle speed predictors to increase the energy efficiency of the following connected and automated vehicle. The loss function is formulated as a weighted-mean-squared error, where the weights are tuned based on the influence of uncertainty at an individual prediction step on the energy consumption of the automated following vehicle. The efficacy of the proposed loss function is validated by applying it to training representative predictors and testing the predictors in the energy-optimal control of the following vehicle. The energy saving of the optimal controller is evaluated by comparing the electricity consumption of a battery electric vehicle with the human driver following, emulated by an intelligent driver model. Simulation results show that the energy consumption of an electric vehicle is reduced by an average of 12% compared to a human driver following demonstrated by an intelligent driver model, whereas using a conventional loss function, a mean-squared error loss function, reduces by 10%.
- 2 July 2022
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 24 (4) , 1643-1654
Hardware-in-the-loop exploration of energy versus emissions trade-off in eco-following scenarios for connected automated vehicles
Studies on eco-driving have mostly taken an energy-centric view and considered driving performance, while less attention has been paid on emissions behavior. This work extends in an experimentally verified way our understanding of the trade-offs among fuel economy, driving aggressiveness, and, especially, emissions in connected automated diesel-powered vehicles. Experiments are performed with a 6.7-L Ford Powerstroke diesel engine, a urea-SCR based NOx aftertreatment system, and a full model for a Ford F250 medium-duty truck in the loop to provide realistic assessment of fuel consumption, tailpipe emissions, and driving style performances. An energy and emissions conscious speed planner is leveraged to follow the traffic. This planner offers flexibility in prioritizing energy or emissions while satisfying user-defined headway constraints, and thus allows exploration of different calibrations in a unified way. Results show how various calibrations of the flexible leader following policy yield 8%–14% decrease in total fuel consumption and 64%–70% decrease in tailpipe emissions compared with a strictly constrained following policy.
- 2 July 2022
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 24 (4) , 1643-1654
Hardware-in-the-loop exploration of energy versus emissions trade-off in eco-following scenarios for connected automated vehicles
Studies on eco-driving have mostly taken an energy-centric view and considered driving performance, while less attention has been paid on emissions behavior. This work extends in an experimentally verified way our understanding of the trade-offs among fuel economy, driving aggressiveness, and, especially, emissions in connected automated diesel-powered vehicles. Experiments are performed with a 6.7-L Ford Powerstroke diesel engine, a urea-SCR based NOx aftertreatment system, and a full model for a Ford F250 medium-duty truck in the loop to provide realistic assessment of fuel consumption, tailpipe emissions, and driving style performances. An energy and emissions conscious speed planner is leveraged to follow the traffic. This planner offers flexibility in prioritizing energy or emissions while satisfying user-defined headway constraints, and thus allows exploration of different calibrations in a unified way. Results show how various calibrations of the flexible leader following policy yield 8%–14% decrease in total fuel consumption and 64%–70% decrease in tailpipe emissions compared with a strictly constrained following policy.
- 16 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 30 (6) , 2450-2465
Design for Real-Time Nonlinear Model Predictive Control With Application to Collision Imminent Steering
Model predictive control (MPC) is a competitive option in modern control systems due to its ability to account for future response and incorporation of complex control objectives. As applications become more intricate, nonlinearities limit the utility of linear control strategies, thus requiring more sophisticated architectures, often at a significant computational cost. This article investigates the computational cost of solving nonlinear MPC problems and provides a framework for designing nonlinear MPC architectures compatible with real-time performance. To motivate the computational complexity associated with nonlinear MPC, the design of an automotive collision imminent steering system and the controller is considered. Various trajectory optimization strategies are examined and compared for this application, identifying multiple-shooting-based Runge-Kutta explicit integration as the most suitable. The control algorithm is then mapped into a graphics processor unit-based hardware system, where special considerations of the parallel hardware architecture are discussed. Compared to the single-shooting solution as the benchmark, multiple shootings on parallel hardware achieve three orders of magnitude improvement in wall time, supporting real-time implementation.
- 16 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 30 (6) , 2450-2465
Design for Real-Time Nonlinear Model Predictive Control With Application to Collision Imminent Steering
Model predictive control (MPC) is a competitive option in modern control systems due to its ability to account for future response and incorporation of complex control objectives. As applications become more intricate, nonlinearities limit the utility of linear control strategies, thus requiring more sophisticated architectures, often at a significant computational cost. This article investigates the computational cost of solving nonlinear MPC problems and provides a framework for designing nonlinear MPC architectures compatible with real-time performance. To motivate the computational complexity associated with nonlinear MPC, the design of an automotive collision imminent steering system and the controller is considered. Various trajectory optimization strategies are examined and compared for this application, identifying multiple-shooting-based Runge-Kutta explicit integration as the most suitable. The control algorithm is then mapped into a graphics processor unit-based hardware system, where special considerations of the parallel hardware architecture are discussed. Compared to the single-shooting solution as the benchmark, multiple shootings on parallel hardware achieve three orders of magnitude improvement in wall time, supporting real-time implementation.
- 1 October 2021
- Published by Wiley in Journal of Autonomous Vehicles and Systems
- Vol. 1 (4)
Real-Time Trajectory Planning for Automated Vehicle Safety and Performance in Dynamic Environments
Safe trajectory planning for high-performance automated vehicles in an environment with both static and moving obstacles is a challenging problem. Part of the challenge is developing a formulation that can be solved in real-time while including the following set of specifications: minimum time-to-goal, a dynamic vehicle model, minimum control effort, both static and moving obstacle avoidance, simultaneous optimization of speed and steering, and a short execution horizon. This paper presents a nonlinear model predictive control-based trajectory planning formulation, tailored for a large, high-speed unmanned ground vehicle, that includes the above set of specifications. The ability to solve this formulation in real-time is evaluated using NLOptControl, an open-source, direct-collocation-based optimal control problem solver in conjunction with the KNITRO nonlinear programming problem solver. The formulation is tested with various sets of specifications. A parametric study relating execution horizon and obstacle speed indicates that the moving obstacle avoidance specification is not needed for safety when the planner has a small execution horizon and the obstacles are moving slowly. However, a moving obstacle avoidance specification is needed when the obstacles are moving faster, and this specification improves the overall safety without, in most cases, increasing the solve-times. The results indicate that (i) safe trajectory planners for high-performance automated vehicles should include the entire set of specifications mentioned above, unless a static or low-speed environment permits a less comprehensive planner and (ii) the resulting formulation can be solved in real-time.
- 1 October 2021
- Published by Wiley in Journal of Autonomous Vehicles and Systems
- Vol. 1 (4)
Real-Time Trajectory Planning for Automated Vehicle Safety and Performance in Dynamic Environments
Safe trajectory planning for high-performance automated vehicles in an environment with both static and moving obstacles is a challenging problem. Part of the challenge is developing a formulation that can be solved in real-time while including the following set of specifications: minimum time-to-goal, a dynamic vehicle model, minimum control effort, both static and moving obstacle avoidance, simultaneous optimization of speed and steering, and a short execution horizon. This paper presents a nonlinear model predictive control-based trajectory planning formulation, tailored for a large, high-speed unmanned ground vehicle, that includes the above set of specifications. The ability to solve this formulation in real-time is evaluated using NLOptControl, an open-source, direct-collocation-based optimal control problem solver in conjunction with the KNITRO nonlinear programming problem solver. The formulation is tested with various sets of specifications. A parametric study relating execution horizon and obstacle speed indicates that the moving obstacle avoidance specification is not needed for safety when the planner has a small execution horizon and the obstacles are moving slowly. However, a moving obstacle avoidance specification is needed when the obstacles are moving faster, and this specification improves the overall safety without, in most cases, increasing the solve-times. The results indicate that (i) safe trajectory planners for high-performance automated vehicles should include the entire set of specifications mentioned above, unless a static or low-speed environment permits a less comprehensive planner and (ii) the resulting formulation can be solved in real-time.