Haiqing Yin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Haiqing Yin has a total of 91 co-authors. Here are the top co-authors by number of shared publications:
Cong Zhang
Collaborative Innovation Center of Steel Technology University of Science and Technology Beijing Beijing China
15 shared publications- Xuanhui Qu
Beijing Advanced Innovation Center for Materials Genome Engineering, Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing, P.R. China
15 shared publications Ruijie Zhang
Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing
14 shared publicationsXue Jiang
Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing, China
13 shared publicationsDil Faraz Khan
10 shared publicationsYongwei Wang
Collaborative Innovation Center of Steel Technology University of Science and Technology Beijing Beijing China
10 shared publications
Latest Publications
- Open Access
- 7 July 2026
- Published by IOP Publishing in Materials Research Express
- Vol. 13 (13) , 136508
Denoising diffusion probabilistic model enabled time-continuous, inheritance-preserving microstructure evolution of virtual materials
This study employs the denoising diffusion probabilistic model (DDPM), a text-to-image generative approach, to predict microstructure evolution. The model starts with a noise image generated from textual descriptions, which is progressively denoised to reveal the microstructure. The model parameters include the training intervals, algorithm selection, image resolution, optimizer settings, encoder configuration, prompts, concept script, and generator settings. The effectiveness of DDPM is demonstrated through three cases: particle coarsening, grain growth, and dendrite solidification. These examples highlight the ability of DDPM to simulate material evolution across different scales, from individual particles to multi-grain interactions and processing parameter effects. The generated micrographs closely match the original images, with prediction errors below 4% for particle and grain size, and about 9% for secondary dendrite arm spacing. The study also addresses underfitting and overfitting and shows that the DDPM predicts interrelated microstructures across successive time steps instead of random samples. This highlights the potential of model for capturing the dynamic nature of microstructural evolution.
- 7 July 2026
- Published by IOP Publishing in Materials Research Express
- Vol. 13 (13) , 136508
Open AccessDenoising diffusion probabilistic model enabled time-continuous, inheritance-preserving microstructure evolution of virtual materials
This study employs the denoising diffusion probabilistic model (DDPM), a text-to-image generative approach, to predict microstructure evolution. The model starts with a noise image generated from textual descriptions, which is progressively denoised to reveal the microstructure. The model parameters include the training intervals, algorithm selection, image resolution, optimizer settings, encoder configuration, prompts, concept script, and generator settings. The effectiveness of DDPM is demonstrated through three cases: particle coarsening, grain growth, and dendrite solidification. These examples highlight the ability of DDPM to simulate material evolution across different scales, from individual particles to multi-grain interactions and processing parameter effects. The generated micrographs closely match the original images, with prediction errors below 4% for particle and grain size, and about 9% for secondary dendrite arm spacing. The study also addresses underfitting and overfitting and shows that the DDPM predicts interrelated microstructures across successive time steps instead of random samples. This highlights the potential of model for capturing the dynamic nature of microstructural evolution.
- 21 April 2026
- Published by Wiley in Steel Research International
- Vol. 97 (11) , 5645-5660
Integrated Computational Optimization of M42 High‐Speed Steel Properties
The intelligent manufacturing of high‐performance alloys necessitates computational frameworks capable of bridging the complex gap between industrial processing, microstructure, and properties. In this study, an integrated computational framework is presented to optimize the process–structure–property relationships in M42 high‐speed steel (HSS). The framework synergizes furnace computational fluid dynamics (CFD), hot‐working finite‐element (FE) simulations, calculation of phase diagrams–diffusion‐controlled transformations (CALPHAD‐DICTRA) modeling, and machine learning (ML) techniques to predict microstructure evolution throughout the entire hot‐working process. Experimental validation demonstrates a temperature‐prediction accuracy exceeding 85%. Furthermore, ML‐driven optimization forging schedule reduced the number of forging passes from 22 to 19 while eliminating cracking risks, resulting in an 8.3% increase in compressive strength (from 4.8 to 5.2 GPa) and a 2.3 HRC enhancement in hardness. Additionally, DICTRA simulations accurately predicted the dissolution kinetics of M 2 C carbides, showing high consistency with experimental observations. This approach establishes a reliable digital thread for HSS manufacturing, significantly enhancing carbide homogeneity and mechanical performance while providing a systematic pathway for the intelligent design of advanced alloys.
- 21 April 2026
- Published by Wiley in Steel Research International
- Vol. 97 (11) , 5645-5660
Integrated Computational Optimization of M42 High‐Speed Steel Properties
The intelligent manufacturing of high‐performance alloys necessitates computational frameworks capable of bridging the complex gap between industrial processing, microstructure, and properties. In this study, an integrated computational framework is presented to optimize the process–structure–property relationships in M42 high‐speed steel (HSS). The framework synergizes furnace computational fluid dynamics (CFD), hot‐working finite‐element (FE) simulations, calculation of phase diagrams–diffusion‐controlled transformations (CALPHAD‐DICTRA) modeling, and machine learning (ML) techniques to predict microstructure evolution throughout the entire hot‐working process. Experimental validation demonstrates a temperature‐prediction accuracy exceeding 85%. Furthermore, ML‐driven optimization forging schedule reduced the number of forging passes from 22 to 19 while eliminating cracking risks, resulting in an 8.3% increase in compressive strength (from 4.8 to 5.2 GPa) and a 2.3 HRC enhancement in hardness. Additionally, DICTRA simulations accurately predicted the dissolution kinetics of M 2 C carbides, showing high consistency with experimental observations. This approach establishes a reliable digital thread for HSS manufacturing, significantly enhancing carbide homogeneity and mechanical performance while providing a systematic pathway for the intelligent design of advanced alloys.
- 18 February 2025
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1020
Screening the TiZrHfNbVMoTa refractory high-entropy alloys with multi-property constraints
- 18 February 2025
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1020
Screening the TiZrHfNbVMoTa refractory high-entropy alloys with multi-property constraints
- 11 February 2025
- Published by Wiley in Steel Research International
- Vol. 96 (9) , 380-396
Optimization of Eutectic Carbide Inhomogeneity in M42 High‐Speed Steel through Machine Learning and Finite‐Element Modeling
The optimization of forging processes in M42 high‐speed steel is crucial for enhancing its microstructure and mechanical properties, particularly in reducing eutectic carbide inhomogeneity. In this study, machine learning (ML) is integrated with finite‐element modeling (FEM) to address the challenges of process parameter optimization in large‐sized ingots. The random forest algorithm is employed to predict the inhomogeneity of eutectic carbides using strain variables derived from FEM simulations as input features. The optimized process, validated through experimental analysis, demonstrates a significant improvement in carbide fragmentation, leading to a more uniform distribution of fine precipitates. The optimized M42 steel exhibits superior mechanical properties, with yield and compressive strengths increasing by ≈115 MPa and 305 MPa compared to the prior forging process. In the results, the efficacy of ML‐driven optimization is underscored in achieving a refined microstructure and enhanced material performance, offering a promising approach for industrial applications of high‐speed steel.
- 11 February 2025
- Published by Wiley in Steel Research International
- Vol. 96 (9) , 380-396
Optimization of Eutectic Carbide Inhomogeneity in M42 High‐Speed Steel through Machine Learning and Finite‐Element Modeling
The optimization of forging processes in M42 high‐speed steel is crucial for enhancing its microstructure and mechanical properties, particularly in reducing eutectic carbide inhomogeneity. In this study, machine learning (ML) is integrated with finite‐element modeling (FEM) to address the challenges of process parameter optimization in large‐sized ingots. The random forest algorithm is employed to predict the inhomogeneity of eutectic carbides using strain variables derived from FEM simulations as input features. The optimized process, validated through experimental analysis, demonstrates a significant improvement in carbide fragmentation, leading to a more uniform distribution of fine precipitates. The optimized M42 steel exhibits superior mechanical properties, with yield and compressive strengths increasing by ≈115 MPa and 305 MPa compared to the prior forging process. In the results, the efficacy of ML‐driven optimization is underscored in achieving a refined microstructure and enhanced material performance, offering a promising approach for industrial applications of high‐speed steel.
- 6 December 2024
- Published by Wiley in Steel Research International
- Vol. 96 (6)
Regulating Oxides Enhances the Mechanical Properties of Additively Manufactured Martensitic Stainless Steel
Laser powder bed fusion (LPBF), a subset of additive manufacturing, is used increasingly to produce martensitic stainless steels (MSSs) for aerospace and medical devices. However, excessive oxygen content in MSS powder generally impairs the mechanical properties of parts produced via LPBF. To investigate the effect of oxides on additively manufactured MSS, this study utilizes powders with various oxygen contents and printed numerous samples under different parameters. This article systematically analyzes the source, morphology, and distribution of oxides in MSS samples and their effects on the microstructure and mechanical properties. It is found that MSS samples printed with high‐oxygen powder exhibit higher strength and hardness. The average hardness of high‐oxygen powder‐printed samples increases by 14.2 HV3 over low‐oxygen samples. Additionally, their average tensile and yield strengths of 1025.97 and 809.18 MPa show increases of 3.36% and 17.33%, respectively. This provides a reference for regulating oxides in additively manufactured MSS and potentially benefiting from them.
- 6 December 2024
- Published by Wiley in Steel Research International
- Vol. 96 (6)
Regulating Oxides Enhances the Mechanical Properties of Additively Manufactured Martensitic Stainless Steel
Laser powder bed fusion (LPBF), a subset of additive manufacturing, is used increasingly to produce martensitic stainless steels (MSSs) for aerospace and medical devices. However, excessive oxygen content in MSS powder generally impairs the mechanical properties of parts produced via LPBF. To investigate the effect of oxides on additively manufactured MSS, this study utilizes powders with various oxygen contents and printed numerous samples under different parameters. This article systematically analyzes the source, morphology, and distribution of oxides in MSS samples and their effects on the microstructure and mechanical properties. It is found that MSS samples printed with high‐oxygen powder exhibit higher strength and hardness. The average hardness of high‐oxygen powder‐printed samples increases by 14.2 HV3 over low‐oxygen samples. Additionally, their average tensile and yield strengths of 1025.97 and 809.18 MPa show increases of 3.36% and 17.33%, respectively. This provides a reference for regulating oxides in additively manufactured MSS and potentially benefiting from them.
- 9 October 2024
- Published by Springer Nature in International Journal of Minerals, Metallurgy and Materials
- Vol. 31 (11) , 2476-2487
Unveiling the cellular microstructure–property relations in martensitic stainless steel via laser powder bed fusion
- 9 October 2024
- Published by Springer Nature in International Journal of Minerals, Metallurgy and Materials
- Vol. 31 (11) , 2476-2487
Unveiling the cellular microstructure–property relations in martensitic stainless steel via laser powder bed fusion
- 21 July 2024
- Published by Wiley in Steel Research International
- Vol. 95 (9)
Homogenization Treatment and Plastic Deformation Improve the Carbide Homogeneity of M42 High‐Speed Steel
The mechanical properties of high‐speed steel (HSS) are significantly influenced by the distribution of carbides formed during solidification. Despite extensive research, the nonuniform cooling in large ingots remains an area requiring further investigation. In this study, the microstructure inhomogeneity in M42 HSS with a diameter of 330 mm is examined. Models are developed to predict the dissolution of carbide networks during homogenization, achieving a 39% reduction in hardness variation (Δr) between the center and surface. Further improvements are attained through hot forging and rolling, leading to the fragmentation of the carbide network into a banded structure. Additionally, a detailed carbide tip dissolution model is established, providing a reliable basis for optimizing annealing processes. As a result, the carbide distribution converges significantly, with hardness variations reduced by 88% to only 0.3 hardness Rockwell C scale, showcasing substantial enhancement in material homogeneity.
- 21 July 2024
- Published by Wiley in Steel Research International
- Vol. 95 (9)
Homogenization Treatment and Plastic Deformation Improve the Carbide Homogeneity of M42 High‐Speed Steel
The mechanical properties of high‐speed steel (HSS) are significantly influenced by the distribution of carbides formed during solidification. Despite extensive research, the nonuniform cooling in large ingots remains an area requiring further investigation. In this study, the microstructure inhomogeneity in M42 HSS with a diameter of 330 mm is examined. Models are developed to predict the dissolution of carbide networks during homogenization, achieving a 39% reduction in hardness variation (Δr) between the center and surface. Further improvements are attained through hot forging and rolling, leading to the fragmentation of the carbide network into a banded structure. Additionally, a detailed carbide tip dissolution model is established, providing a reliable basis for optimizing annealing processes. As a result, the carbide distribution converges significantly, with hardness variations reduced by 88% to only 0.3 hardness Rockwell C scale, showcasing substantial enhancement in material homogeneity.
- Open Access
Preparation of a Gradient Anti-Oxidation Coating for Aircraft C/C Composite Brake Disc and Its High-Temperature In Situ Self-Healing Performance
We studied a gradient anti-oxidation coating of C/C composite materials for aircraft brake discs with a simple process and low costs. The gradient coating consists of two layers, of which the inner layer is prepared with tetraethyl orthosilicate (Si (OC2H5)4), C2H5OH, H3PO4 and B4C, and the outer layer is prepared with Na2B4O7.10H2O, B2O3, and SiO2 powder. The experimental results show that after being oxidized at 700 °C for 15 h, the oxidation weight loss of the sample with the coating was only −0.17%. At the same time, after 50 thermal cycles in air at 900 °C, the sample’s oxidation weight loss was only −0.06%. We conducted the 1:1 dynamic simulation test for aircraft brake discs, and the brake disc did not oxidize, thus meeting the requirements for aircraft use. In addition, the anti-oxidation mechanism of the coating was analyzed via scanning electron microscopy (SEM), X-ray diffraction (XRD), differential thermal analysis (DSC-TGA), and high-temperature in situ SEM.
Open AccessPreparation of a Gradient Anti-Oxidation Coating for Aircraft C/C Composite Brake Disc and Its High-Temperature In Situ Self-Healing Performance
We studied a gradient anti-oxidation coating of C/C composite materials for aircraft brake discs with a simple process and low costs. The gradient coating consists of two layers, of which the inner layer is prepared with tetraethyl orthosilicate (Si (OC2H5)4), C2H5OH, H3PO4 and B4C, and the outer layer is prepared with Na2B4O7.10H2O, B2O3, and SiO2 powder. The experimental results show that after being oxidized at 700 °C for 15 h, the oxidation weight loss of the sample with the coating was only −0.17%. At the same time, after 50 thermal cycles in air at 900 °C, the sample’s oxidation weight loss was only −0.06%. We conducted the 1:1 dynamic simulation test for aircraft brake discs, and the brake disc did not oxidize, thus meeting the requirements for aircraft use. In addition, the anti-oxidation mechanism of the coating was analyzed via scanning electron microscopy (SEM), X-ray diffraction (XRD), differential thermal analysis (DSC-TGA), and high-temperature in situ SEM.
- 14 December 2023
- Published by Springer Nature in Integrating Materials and Manufacturing Innovation
- Vol. 12 (4) , 502-513
An Integrated Multiscale Model to Study the Marangoni Effect on Molten Pool and Microstructure Evolution
- 14 December 2023
- Published by Springer Nature in Integrating Materials and Manufacturing Innovation
- Vol. 12 (4) , 502-513
An Integrated Multiscale Model to Study the Marangoni Effect on Molten Pool and Microstructure Evolution
- 21 June 2023
- Published by Springer Nature in Journal of Materials Research
- Vol. 38 (13) , 3383-3394
Mechanical properties and low temperature degradation (LTD) of cation-stabilized zirconia
- 21 June 2023
- Published by Springer Nature in Journal of Materials Research
- Vol. 38 (13) , 3383-3394
Mechanical properties and low temperature degradation (LTD) of cation-stabilized zirconia