Deepak Chowdary Duvvada
Deepak Chowdary Duvvada has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Dasika Nagesh Kumar
Department of Civil Engineering, Indian Institute of Science, Bengaluru, India
13 shared publications - Bathina Venkateswara Rao
V. R. Siddhartha Engineering College
6 shared publications J. Amarnath
Jawaharlal Nehru Technological University, Hydarabad, Andhra Pradesh, India
3 shared publications- Polamraju. V. S. Sobhan
Department of Electrical and Electronics Engineering, Vignan's Foundations for Science, Technology and Research, Vadlamudi 522 213, India
3 shared publications Autonomous
India
2 shared publications- J. Amarnath
Jawaharlal Nehru Technological University, Hyderabad, India
2 shared publications
Latest Publications
- Open Access
- 11 September 2020
- Published by Walter de Gruyter GmbH in International Journal of Emerging Electric Power Systems
- Vol. 21 (5)
Study of electric field stress on the surface contour and at the triple junction in three phase GIS with FGM spacer under the depression defect
Now days, the establishment of spacers is in wide usage in three-phase Gas Insulated Busduct (GIB) for providing mechanical support and better insulation to the conductors. The region of the intersection of SF6 gas, enclosure end and the spacer is one of the weakest links in GIB, so the major concentration is done on minimization of electric field stress at this junction by using Functionally Graded Material (FGM) technique. The other incidents of insulation failures are due to several defects like depression, delamination etc. reduces the dielectric strength of the spacers. In this paper, an FGM post type spacer has been designed for a three-phase GIB under depression and further electric field stress at Triple Junction (TJ) is reduced by introducing a metal insert (MI) nearer to the TJ. Several filler materials are used as doping materials for obtaining different permittivity values using FGM technique to achieve uniform electric field stress. Simulation is carried out for the designed spacer at various operating voltages with different types of FGM gradings. The effect of depression with different dimensions and positions is analyzed before and after inserting MI to the FGM post type spacer in three-phase GIB.
- 11 September 2020
- Published by Walter de Gruyter GmbH in International Journal of Emerging Electric Power Systems
- Vol. 21 (5)
Open AccessStudy of electric field stress on the surface contour and at the triple junction in three phase GIS with FGM spacer under the depression defect
Now days, the establishment of spacers is in wide usage in three-phase Gas Insulated Busduct (GIB) for providing mechanical support and better insulation to the conductors. The region of the intersection of SF6 gas, enclosure end and the spacer is one of the weakest links in GIB, so the major concentration is done on minimization of electric field stress at this junction by using Functionally Graded Material (FGM) technique. The other incidents of insulation failures are due to several defects like depression, delamination etc. reduces the dielectric strength of the spacers. In this paper, an FGM post type spacer has been designed for a three-phase GIB under depression and further electric field stress at Triple Junction (TJ) is reduced by introducing a metal insert (MI) nearer to the TJ. Several filler materials are used as doping materials for obtaining different permittivity values using FGM technique to achieve uniform electric field stress. Simulation is carried out for the designed spacer at various operating voltages with different types of FGM gradings. The effect of depression with different dimensions and positions is analyzed before and after inserting MI to the FGM post type spacer in three-phase GIB.
- 30 December 2019
- Published by International Information and Engineering Technology Association in Modelling, Measurement and Control A
- Vol. 92 (2-4) , 81-85
Optimal Tuning of Unified Power Flow Controller Parameters Using Firefly Algorithm
- 30 December 2019
- Published by International Information and Engineering Technology Association in Modelling, Measurement and Control A
- Vol. 92 (2-4) , 81-85
Optimal Tuning of Unified Power Flow Controller Parameters Using Firefly Algorithm
- 20 March 2018
- Published by Springer Nature
- p. 707-716
Fuzzy Controller-Based Intelligent Operation of Grid-Connected DFIG During Recurring Symmetrical Faults
- 20 March 2018
- Published by Springer Nature
- p. 707-716
Fuzzy Controller-Based Intelligent Operation of Grid-Connected DFIG During Recurring Symmetrical Faults
- 1 January 2018
- Published by IGI Global Scientific Publishing
- p. 182-214
A Computational Comparison of Swarm Optimization Techniques for Optimal Load Shedding Under the Presence of FACTS Devices to Avoid Voltage Instability
Voltage instability has become a serious threat to the operation of modern power systems. Load shedding is one of the effective countermeasures for avoiding instability. Improper load shedding may result in huge technical and economic losses. So, an optimal load shedding is to be carried out for supplying more demand. This chapter implements bat and firefly algorithms for solving the optimal load shedding problem to identify the optimal amount of load to be shed. This is applied for a multi-objective function which contains minimization of amount of load to be shed, active power loss minimization, and voltage profile improvement. The presence of with and without static VAR compensator (SVC), thyristor-controlled series capacitor (TCSC), and unified power flow controller (UPFC) on load shedding for IEEE 57 bus system has been presented and analyzed. The results obtained with bat and firefly algorithms were compared with genetic algorithm (GA) and also the impact of flexible AC transmission system (FACTS) devices on load shedding problem has been analyzed.
- 1 January 2018
- Published by IGI Global Scientific Publishing
- p. 182-214
A Computational Comparison of Swarm Optimization Techniques for Optimal Load Shedding Under the Presence of FACTS Devices to Avoid Voltage Instability
Voltage instability has become a serious threat to the operation of modern power systems. Load shedding is one of the effective countermeasures for avoiding instability. Improper load shedding may result in huge technical and economic losses. So, an optimal load shedding is to be carried out for supplying more demand. This chapter implements bat and firefly algorithms for solving the optimal load shedding problem to identify the optimal amount of load to be shed. This is applied for a multi-objective function which contains minimization of amount of load to be shed, active power loss minimization, and voltage profile improvement. The presence of with and without static VAR compensator (SVC), thyristor-controlled series capacitor (TCSC), and unified power flow controller (UPFC) on load shedding for IEEE 57 bus system has been presented and analyzed. The results obtained with bat and firefly algorithms were compared with genetic algorithm (GA) and also the impact of flexible AC transmission system (FACTS) devices on load shedding problem has been analyzed.
- 1 January 2018
- Published by IGI Global Scientific Publishing
- p. 1-33
Multi-Objective Optimal Power Flow Using Metaheuristic Optimization Algorithms With Unified Power Flow Controller to Enhance the Power System Performance
In this chapter a multi objective optimal power flow (OPF) is obtained by using latest Metaheuristic optimization techniques BAT search algorithm (BAT), cuckoo search algorithm (CSA) and firefly algorithm (FA) with Unified power flow controller (UPFC). UPFC is a voltage source converter type Flexible Alternating Current Transmission System (FACTS) device. It is able to control the voltage magnitudes, voltage angles and line impedances individually or simultaneously. To enhance the power system performance, the optimal power flow has been incorporated UPFC along with BAT algorithm, cuckoo search algorithm and firefly algorithm based multi objective function comprising of two objectives those are total real power loss and the fuel cost of total real power generation. The BAT algorithm, cuckoo search algorithm and firefly algorithm based OPF has been examined and tested on a 5 bus test system and modified IEEE 30 bus system without and with UPFC. The results obtained with BAT algorithm, cuckoo search algorithm and firefly algorithms are compared with Differential Evaluation (DE).
- 1 January 2018
- Published by IGI Global Scientific Publishing
- p. 1-33
Multi-Objective Optimal Power Flow Using Metaheuristic Optimization Algorithms With Unified Power Flow Controller to Enhance the Power System Performance
In this chapter a multi objective optimal power flow (OPF) is obtained by using latest Metaheuristic optimization techniques BAT search algorithm (BAT), cuckoo search algorithm (CSA) and firefly algorithm (FA) with Unified power flow controller (UPFC). UPFC is a voltage source converter type Flexible Alternating Current Transmission System (FACTS) device. It is able to control the voltage magnitudes, voltage angles and line impedances individually or simultaneously. To enhance the power system performance, the optimal power flow has been incorporated UPFC along with BAT algorithm, cuckoo search algorithm and firefly algorithm based multi objective function comprising of two objectives those are total real power loss and the fuel cost of total real power generation. The BAT algorithm, cuckoo search algorithm and firefly algorithm based OPF has been examined and tested on a 5 bus test system and modified IEEE 30 bus system without and with UPFC. The results obtained with BAT algorithm, cuckoo search algorithm and firefly algorithms are compared with Differential Evaluation (DE).
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1859, 020038
Voltage stability index based optimal placement of static VAR compensator and sizing using Cuckoo search algorithm
This paper furnish the new Metaheuristic algorithm called Cuckoo Search Algorithm (CSA) for solving optimal power flow (OPF) problem with minimization of real power generation cost. The CSA is found to be the most efficient algorithm for solving single objective optimal power flow problems. The CSA performance is tested on IEEE 57 bus test system with real power generation cost minimization as objective function. Static VAR Compensator (SVC) is one of the best shunt connected device in the Flexible Alternating Current Transmission System (FACTS) family. It has capable of controlling the voltage magnitudes of buses by injecting the reactive power to system. In this paper SVC is integrated in CSA based Optimal Power Flow to optimize the real power generation cost. SVC is used to improve the voltage profile of the system. CSA gives better results as compared to genetic algorithm (GA) in both without and with SVC conditions.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1859, 020038
Voltage stability index based optimal placement of static VAR compensator and sizing using Cuckoo search algorithm
This paper furnish the new Metaheuristic algorithm called Cuckoo Search Algorithm (CSA) for solving optimal power flow (OPF) problem with minimization of real power generation cost. The CSA is found to be the most efficient algorithm for solving single objective optimal power flow problems. The CSA performance is tested on IEEE 57 bus test system with real power generation cost minimization as objective function. Static VAR Compensator (SVC) is one of the best shunt connected device in the Flexible Alternating Current Transmission System (FACTS) family. It has capable of controlling the voltage magnitudes of buses by injecting the reactive power to system. In this paper SVC is integrated in CSA based Optimal Power Flow to optimize the real power generation cost. SVC is used to improve the voltage profile of the system. CSA gives better results as compared to genetic algorithm (GA) in both without and with SVC conditions.
- Open Access
- 1 July 2016
- Published by Institution of Engineering and Technology (IET) in IET Generation, Transmission & Distribution
- Vol. 10 (10) , 2327-2335
Real power performance index and line stability index‐based management of contingency using firefly algorithm
Provision of secured and uninterrupted supply of power is an essential pre‐requisite for the electrical industry. Hence, FACTS devices need to be employed efficiently to ensure the security of the power system. This study proposes, a repetition of severity‐based strategy of placement of interline power flow controller (IPFC) using composite severity index (CSI) for contingency management. The formulated CSI is a combination of real power performance index) and line stability index L mn . Thus, the CSI is expected to provide an exact measure of stress on the lines in terms of MW overloading and voltage instability. The IPFC is further tuned for a multi‐objective function using firefly algorithm. To verify the proposed methodology, it has been tested and implemented on IEEE 30 and Indian utility 62 bus system. The system has been further tested under highly stressful condition by increasing the load on the maximum loaded bus up to the critical value. The results have been presented and analysed to determine the effectiveness of IPFC for contingency management.
- 1 July 2016
- Published by Institution of Engineering and Technology (IET) in IET Generation, Transmission & Distribution
- Vol. 10 (10) , 2327-2335
Open AccessReal power performance index and line stability index‐based management of contingency using firefly algorithm
Provision of secured and uninterrupted supply of power is an essential pre‐requisite for the electrical industry. Hence, FACTS devices need to be employed efficiently to ensure the security of the power system. This study proposes, a repetition of severity‐based strategy of placement of interline power flow controller (IPFC) using composite severity index (CSI) for contingency management. The formulated CSI is a combination of real power performance index) and line stability index L mn . Thus, the CSI is expected to provide an exact measure of stress on the lines in terms of MW overloading and voltage instability. The IPFC is further tuned for a multi‐objective function using firefly algorithm. To verify the proposed methodology, it has been tested and implemented on IEEE 30 and Indian utility 62 bus system. The system has been further tested under highly stressful condition by increasing the load on the maximum loaded bus up to the critical value. The results have been presented and analysed to determine the effectiveness of IPFC for contingency management.
- 1 October 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 00849162,p. 215-218
Electric field analysis at the triple junction of a optimum profile disc type spacer in SF6 gas insulated system with abnormalities under DC voltages
In Gas Insulated Systems the breakdown strength of SF 6 gas is badly affected by locally enhanced electric fields due to protrusions and delamination. Metal insert electrodes, which are used in GIS, reduces stresses near the triple junctions with simultaneous rise in the stresses elsewhere along spacer surface. AC-GIS are in operation for a long time but there is a limited knowledge for DC application. In the case of DC-GIS, charges invariably accumulate over a period of time along the spacer surface. The electric field distribution around solid spacer is greatly altered by the accumulated surface charges. In this work, the electric field distribution with DC as applied voltage is studied at the triple junction for a cone type spacer with and without metal insert along with the effect of delamination and protrusions on the surface of the insulator. Finite Element Method (FEM), one of the proven numerical method, is used for computing the electric fields at various points under consideration.
- 1 October 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 00849162,p. 215-218
Electric field analysis at the triple junction of a optimum profile disc type spacer in SF6 gas insulated system with abnormalities under DC voltages
In Gas Insulated Systems the breakdown strength of SF 6 gas is badly affected by locally enhanced electric fields due to protrusions and delamination. Metal insert electrodes, which are used in GIS, reduces stresses near the triple junctions with simultaneous rise in the stresses elsewhere along spacer surface. AC-GIS are in operation for a long time but there is a limited knowledge for DC application. In the case of DC-GIS, charges invariably accumulate over a period of time along the spacer surface. The electric field distribution around solid spacer is greatly altered by the accumulated surface charges. In this work, the electric field distribution with DC as applied voltage is studied at the triple junction for a cone type spacer with and without metal insert along with the effect of delamination and protrusions on the surface of the insulator. Finite Element Method (FEM), one of the proven numerical method, is used for computing the electric fields at various points under consideration.
- Open Access
- 1 August 2010
- Published by Springer Nature in Sādhanā
- Vol. 35 (4) , 393-406
Influence of unbalanced voltages on the movement of metallic particle in a three phase common enclosure gas insulated busduct
- 1 August 2010
- Published by Springer Nature in Sādhanā
- Vol. 35 (4) , 393-406
Open AccessInfluence of unbalanced voltages on the movement of metallic particle in a three phase common enclosure gas insulated busduct