Rino Choi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rino Choi has a total of 238 co-authors. Here are the top co-authors by number of shared publications:
Manh-Cuong Nguyen
D Convergence Center, Inha University, Incheon, Korea
16 shared publications- Manh-Cuong Nguyen
Inha University
15 shared publications An Hoang-Thuy Nguyen
D Convergence Center, Inha University, Incheon, Korea
14 shared publications- Daewoong Kwon
Department of Electronic Engineering, Hanyang University, Seoul, Republic of Korea
11 shared publications - Jiyoung Kim
The University of Texas at Dallas
8 shared publications - An Hoang-Thuy Nguyen
Inha University
7 shared publications
Latest Publications
- 5 November 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (42)
Charge Generation in Doped Organic p–n Junctions: A Two‐Descriptor Design Framework
Charge‐generation layers (CGLs) underpin tandem organic optoelectronics, yet their host–dopant selection remains largely empirical, lacking a mechanism‐resolved descriptor for comparing candidate systems. Here, a temperature‐dependent reverse‐bias transport framework is established for a doped organic p–n junction composed of ReO 3 ‐doped 4,4′,4″‐tris[2‐naphthyl(phenyl)amino]triphenylamine and Rb 2 CO 3 ‐doped 4,7‐diphenyl‐1,10‐phenanthroline. The doped junction sustains reverse current densities approximately three orders of magnitude higher than an undoped control, confirming dopant‐enabled charge generation and transport. Coupling Poole–Frenkel (PF) emission with thermally assisted dopant‐mediated tunneling (TAT) reproduces the reverse‐bias current density–voltage characteristics from 150 to 300 K, and resolves a temperature‐driven crossover from PF‐dominated hopping to TAT near room temperature. Notably, this competition reduces to two physically interpretable descriptors, the hopping activation parameter W and the effective energy offset φ a , from which a W– φ a design map is constructed, linking effective transport descriptors to the reverse‐bias voltage required for a target current density. This descriptor‐based framework reframes CGL host–dopant selection from empirical optimization toward mechanism‐guided materials design.
- 5 November 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (42)
Charge Generation in Doped Organic p–n Junctions: A Two‐Descriptor Design Framework
Charge‐generation layers (CGLs) underpin tandem organic optoelectronics, yet their host–dopant selection remains largely empirical, lacking a mechanism‐resolved descriptor for comparing candidate systems. Here, a temperature‐dependent reverse‐bias transport framework is established for a doped organic p–n junction composed of ReO 3 ‐doped 4,4′,4″‐tris[2‐naphthyl(phenyl)amino]triphenylamine and Rb 2 CO 3 ‐doped 4,7‐diphenyl‐1,10‐phenanthroline. The doped junction sustains reverse current densities approximately three orders of magnitude higher than an undoped control, confirming dopant‐enabled charge generation and transport. Coupling Poole–Frenkel (PF) emission with thermally assisted dopant‐mediated tunneling (TAT) reproduces the reverse‐bias current density–voltage characteristics from 150 to 300 K, and resolves a temperature‐driven crossover from PF‐dominated hopping to TAT near room temperature. Notably, this competition reduces to two physically interpretable descriptors, the hopping activation parameter W and the effective energy offset φ a , from which a W– φ a design map is constructed, linking effective transport descriptors to the reverse‐bias voltage required for a target current density. This descriptor‐based framework reframes CGL host–dopant selection from empirical optimization toward mechanism‐guided materials design.
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (11) , 2175-2178
Enhanced Capacitive Memory Window in Hf x Zr 1-x O 2 Bilayer Capacitor via Zr-Composition Engineering
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (11) , 2175-2178
Enhanced Capacitive Memory Window in Hf x Zr 1-x O 2 Bilayer Capacitor via Zr-Composition Engineering
- 22 August 2026
- Published by Elsevier in Thin Solid Films
- Vol. 850
Enhanced polarization in Hf1-xZrxO2 films through rapid thermal annealing followed by rapid cooling
- 22 August 2026
- Published by Elsevier in Thin Solid Films
- Vol. 850
Enhanced polarization in Hf1-xZrxO2 films through rapid thermal annealing followed by rapid cooling
- 9 August 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (16) , e70480
Effect of Annealing Ramp‐Up Rate on the Ferroelectric Properties of Hf 0.5 Zr 0.5 O 2 Capacitors
Thermal annealing critically affects ferroelectric phase formation in HfO 2 ‐based films and governs stabilization of the polar orthorhombic phase. Here, we demonstrate that the annealing ramp‐up rate strongly influences the polarization and endurance of ferroelectric Hf 0.5 Zr 0.5 O 2 (HZO) capacitors. When the ramp‐up rate to 400 °C is controlled, capacitors annealed at rates of ≥200 °C/h exhibit saturated hysteresis loops with remanent polarization (2 P r ) above 40 μC/cm 2 and robust endurance up to 5 × 10 8 switching cycles, whereas those annealed at a rate of 100 °C/h show suppressed 2 P r and early endurance failure. Structural and electrical analyses indicate that a slow ramp‐up rate promotes the formation of the nonferroelectric monoclinic phase, whereas a rapid ramp‐up kinetically favors the stabilization of the ferroelectric orthorhombic phase. These findings establish the ramp‐up rate as a critical thermal processing parameter for optimizing phase formation and reliability in HZO. Importantly, the improved ferroelectric performance is achieved without additional process complexity while remaining fully compatible with a back‐end‐of‐line thermal budget.
- 9 August 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (16) , e70480
Effect of Annealing Ramp‐Up Rate on the Ferroelectric Properties of Hf 0.5 Zr 0.5 O 2 Capacitors
Thermal annealing critically affects ferroelectric phase formation in HfO 2 ‐based films and governs stabilization of the polar orthorhombic phase. Here, we demonstrate that the annealing ramp‐up rate strongly influences the polarization and endurance of ferroelectric Hf 0.5 Zr 0.5 O 2 (HZO) capacitors. When the ramp‐up rate to 400 °C is controlled, capacitors annealed at rates of ≥200 °C/h exhibit saturated hysteresis loops with remanent polarization (2 P r ) above 40 μC/cm 2 and robust endurance up to 5 × 10 8 switching cycles, whereas those annealed at a rate of 100 °C/h show suppressed 2 P r and early endurance failure. Structural and electrical analyses indicate that a slow ramp‐up rate promotes the formation of the nonferroelectric monoclinic phase, whereas a rapid ramp‐up kinetically favors the stabilization of the ferroelectric orthorhombic phase. These findings establish the ramp‐up rate as a critical thermal processing parameter for optimizing phase formation and reliability in HZO. Importantly, the improved ferroelectric performance is achieved without additional process complexity while remaining fully compatible with a back‐end‐of‐line thermal budget.
- 20 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (3) , 1292-1296
Performance Enhancement of Ferroelectric Hafnium–Zirconium Oxide Tunnel Junctions by Nitrogen Incorporation
Hafnium–zirconium oxide (HZO) ferroelectric tunnel junctions (FTJs) were fabricated using a metal–insulator–ferroelectric–insulator–metal structure with a top interlayer of HfO ${}_{x}$ N ${}_{y}$ deposited by reactive sputtering. The tunneling electroresistance of the resulting FTJ devices increased significantly as the nitrogen flow in the top HfO ${}_{x}$ N ${}_{y}$ interlayer increased, reaching 700 with reasonable retention characteristics. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) provided evidence of orthomorphic-phase enhancement and the top interlayer quality improvement, respectively.
- 20 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (3) , 1292-1296
Performance Enhancement of Ferroelectric Hafnium–Zirconium Oxide Tunnel Junctions by Nitrogen Incorporation
Hafnium–zirconium oxide (HZO) ferroelectric tunnel junctions (FTJs) were fabricated using a metal–insulator–ferroelectric–insulator–metal structure with a top interlayer of HfO ${}_{x}$ N ${}_{y}$ deposited by reactive sputtering. The tunneling electroresistance of the resulting FTJ devices increased significantly as the nitrogen flow in the top HfO ${}_{x}$ N ${}_{y}$ interlayer increased, reaching 700 with reasonable retention characteristics. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) provided evidence of orthomorphic-phase enhancement and the top interlayer quality improvement, respectively.
- 9 July 2025
- Published by Springer Nature in Journal of the Korean Physical Society
- p. 1-12
Heat management strategy for hybrid-bonded wafers using MgO interlayer dielectric
- 9 July 2025
- Published by Springer Nature in Journal of the Korean Physical Society
- p. 1-12
Heat management strategy for hybrid-bonded wafers using MgO interlayer dielectric
- Open Access
- 24 March 2025
- Published by Springer Nature in Nano Convergence
- Vol. 12 (1) , 1-12
Defect passivation of hafnium oxide ferroelectric tunnel junction using forming gas annealing for neuromorphic applications
Forming gas annealing (FGA) is applied to HfOx ferroelectric tunnel junction (FTJ) synaptic devices to passivate defects and reduce trap-assisted-tunneling (TAT). Without FGA, TAT caused by defects in metal–ferroelectric–insulator–semiconductor (MFIS) FTJ stack dominates the conduction mechanism in FTJs and results in no memory window (MW). The reduction of defects or TAT after FGA reveals the effect of polarization switching on the FTJ performance. Consequently, linear/symmetric potentiation and depression (P/D) characteristics of FTJ after FGA with stable repeatability are obtained. Owing to the FGA-induced linearity and symmetricity of P/D, a learning accuracy of approximately 90% is achieved via pattern recognition simulations utilizing HfOx FTJ crossbar. Graphical Abstract
- 24 March 2025
- Published by Springer Nature in Nano Convergence
- Vol. 12 (1) , 1-12
Open AccessDefect passivation of hafnium oxide ferroelectric tunnel junction using forming gas annealing for neuromorphic applications
Forming gas annealing (FGA) is applied to HfOx ferroelectric tunnel junction (FTJ) synaptic devices to passivate defects and reduce trap-assisted-tunneling (TAT). Without FGA, TAT caused by defects in metal–ferroelectric–insulator–semiconductor (MFIS) FTJ stack dominates the conduction mechanism in FTJs and results in no memory window (MW). The reduction of defects or TAT after FGA reveals the effect of polarization switching on the FTJ performance. Consequently, linear/symmetric potentiation and depression (P/D) characteristics of FTJ after FGA with stable repeatability are obtained. Owing to the FGA-induced linearity and symmetricity of P/D, a learning accuracy of approximately 90% is achieved via pattern recognition simulations utilizing HfOx FTJ crossbar. Graphical Abstract
- 1 March 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (10)
Thermal budget study to simultaneously achieve low-temperature (<400 °C) process and high endurance of ferroelectric Hf0.5Zr0.5O2 thin films
This work comprehensively investigates the thermal budget required to simultaneously achieve low-temperature process conditions and high endurance in atomic layer deposited ferroelectric Hf0.5Zr0.5O2 (HZO) thin films. Because a certain level of thermal budget is required to achieve ferroelectricity in 10 nm HZO thin films, the crystallization temperature can be lowered below 400 °C by simply increasing the annealing time. In addition, the analysis of the crystallization behavior of HZO thin films based on the Johnson–Mehl–Avrami–Kolmogorov model revealed that longer annealing times are required to lower the annealing temperature for HZO crystallization due to the limitation of the crystallization rate. Consequently, low-temperature (<400 °C) ferroelectric HZO thin films with large remanent polarization along with improved leakage behavior and endurance were realized. These results not only facilitate the back-end-of-line integration of HZO thin films but also demonstrate the feasibility of in situ HZO crystallization by thermal budget for subsequent interconnect formation, simplifying the overall process and saving costs by eliminating a dedicated annealing process.
- 1 March 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (10)
Thermal budget study to simultaneously achieve low-temperature (<400 °C) process and high endurance of ferroelectric Hf0.5Zr0.5O2 thin films
This work comprehensively investigates the thermal budget required to simultaneously achieve low-temperature process conditions and high endurance in atomic layer deposited ferroelectric Hf0.5Zr0.5O2 (HZO) thin films. Because a certain level of thermal budget is required to achieve ferroelectricity in 10 nm HZO thin films, the crystallization temperature can be lowered below 400 °C by simply increasing the annealing time. In addition, the analysis of the crystallization behavior of HZO thin films based on the Johnson–Mehl–Avrami–Kolmogorov model revealed that longer annealing times are required to lower the annealing temperature for HZO crystallization due to the limitation of the crystallization rate. Consequently, low-temperature (<400 °C) ferroelectric HZO thin films with large remanent polarization along with improved leakage behavior and endurance were realized. These results not only facilitate the back-end-of-line integration of HZO thin films but also demonstrate the feasibility of in situ HZO crystallization by thermal budget for subsequent interconnect formation, simplifying the overall process and saving costs by eliminating a dedicated annealing process.