Danielle Wajngarten
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Danielle Wajngarten has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Patricia Petromilli Nordi Sasso Garcia
Department of Social Dentistry, São Paulo State University (Unesp), School of Dentistry, Araraquara, SP, Brazil
10 shared publications - Juliana Alvares Duarte Bonini Campos
Universidade Estadual Paulista, Brazil
6 shared publications - Ana Carolina Botta
Department of General Dentistry Stony Brook School of Dental Medicine Stony Brook University Stony Brook NY USA
4 shared publications C. D. Presoto
Department of Social Dentistry, School of Dentistry, São Paulo State University (Unesp), Araraquara, Brazil
2 shared publications- Júlia Margato Pazos
Department of Social Dentistry São Paulo State University (UNESP), School of Dentistry Araraquara São Paulo Brazil
2 shared publications - Tamíris da Costa Neves
Department of Social Dentistry, School of Dentistry, São Paulo State University (Unesp), Araraquara, São Paulo, Brazil
2 shared publications
Latest Publications
- 24 August 2022
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 9 (2) , 423-427
Effect of the use of dental loupe on cavity size after removal of the aged composite resin restorations
Introduction: The aim of the present study was to evaluate the effects of removal of artificially aged and non-aged resin composite restorations in-vitro with or without aid of dental loupe on cavity size change. Methods: A low-speed hand piece was used to prepare occlusal cavities in 32 acrylic molar teeth. The size of cavities after cavity preparation were calculated using ImageJ software. The teeth were restored with composite resin and divided into four groups according to the use of dental loupe (2.5x magnification) (with and without magnification) and ageing effect (non-aged and aged). In order to simulate the ageing effect, samples were kept in boiling water for 8 hours. The effects of artificial ageing on the color and translucency of the resin composites used were also analyzed using spectrophotometer. Cavity sizes after the removal of restorations were re-calculated by using the ImageJ software and differences in cavity sizes were also calculated. Paired t-tests were applied to data (p < 0.05). Results: There were significant increases in cavity size using both techniques and both type of restorations although the size increase in percentage was less only when magnification was used during removal of non-aged restorations. Conclusion: Cavity size changes significantly during replacement of restorations and the use of magnification may be not of benefit in reducing the size of the change of removal of aged resin composite restorations.
- 24 August 2022
- Published by Selcuk Dental Journal in Selcuk Dental Journal
- Vol. 9 (2) , 423-427
Effect of the use of dental loupe on cavity size after removal of the aged composite resin restorations
Introduction: The aim of the present study was to evaluate the effects of removal of artificially aged and non-aged resin composite restorations in-vitro with or without aid of dental loupe on cavity size change. Methods: A low-speed hand piece was used to prepare occlusal cavities in 32 acrylic molar teeth. The size of cavities after cavity preparation were calculated using ImageJ software. The teeth were restored with composite resin and divided into four groups according to the use of dental loupe (2.5x magnification) (with and without magnification) and ageing effect (non-aged and aged). In order to simulate the ageing effect, samples were kept in boiling water for 8 hours. The effects of artificial ageing on the color and translucency of the resin composites used were also analyzed using spectrophotometer. Cavity sizes after the removal of restorations were re-calculated by using the ImageJ software and differences in cavity sizes were also calculated. Paired t-tests were applied to data (p < 0.05). Results: There were significant increases in cavity size using both techniques and both type of restorations although the size increase in percentage was less only when magnification was used during removal of non-aged restorations. Conclusion: Cavity size changes significantly during replacement of restorations and the use of magnification may be not of benefit in reducing the size of the change of removal of aged resin composite restorations.
- 11 May 2021
- Published by Sciencedomain International in Journal of Advances in Medicine and Medical Research
- p. 18-23
Development and Validation of Class I Preparation and Restoration Quality Assessment Methods
This study sought to develop and validate two methods of quality assessment, one for Class I cavity preparation and another for composite resin restoration. This was an experimental laboratory study. The methods are named Class I Cavity Preparation Assessment – COCA and Class I Cavity Restoration Assessment – COCRA. During the development of the methods, 5 items were elaborated for COCA and 10 items for COCRA. Each item should be classified as appropriate, partially appropriate, or inappropriate. For each method, after evaluation, all item values should be added with a maximum possible score of ten points. The reliability of the COCA and COCRA was estimated through intra-observer reproducibility. For the methods application, 80 Class I cavity preparation and restoration in first molars were evaluated. A descriptive statistical analysis was performed, and the intra-observer concordance was estimated using the intraclass correlation coefficient (ρ). As a result, it was possible to observe that the reproducibility for COCA of evaluator 1 (ρ=0.76) and evaluator 2 (ρ=1.00) was classified as good and excellent, respectively. The reproducibility for COCRA of evaluator 1 (ρ=0.99) and evaluator 2 (ρ=0.77) was classified as excellent and good, respectively. It was concluded that COCA and COCRA were valid and reliable for the assessment of quality of Class I cavity preparation and restoration.
- 11 May 2021
- Published by Sciencedomain International in Journal of Advances in Medicine and Medical Research
- p. 18-23
Development and Validation of Class I Preparation and Restoration Quality Assessment Methods
This study sought to develop and validate two methods of quality assessment, one for Class I cavity preparation and another for composite resin restoration. This was an experimental laboratory study. The methods are named Class I Cavity Preparation Assessment – COCA and Class I Cavity Restoration Assessment – COCRA. During the development of the methods, 5 items were elaborated for COCA and 10 items for COCRA. Each item should be classified as appropriate, partially appropriate, or inappropriate. For each method, after evaluation, all item values should be added with a maximum possible score of ten points. The reliability of the COCA and COCRA was estimated through intra-observer reproducibility. For the methods application, 80 Class I cavity preparation and restoration in first molars were evaluated. A descriptive statistical analysis was performed, and the intra-observer concordance was estimated using the intraclass correlation coefficient (ρ). As a result, it was possible to observe that the reproducibility for COCA of evaluator 1 (ρ=0.76) and evaluator 2 (ρ=1.00) was classified as good and excellent, respectively. The reproducibility for COCRA of evaluator 1 (ρ=0.99) and evaluator 2 (ρ=0.77) was classified as excellent and good, respectively. It was concluded that COCA and COCRA were valid and reliable for the assessment of quality of Class I cavity preparation and restoration.
- 1 February 2021
- Published by Wiley in European Journal of Dental Education
- Vol. 26 (1) , 36-44
Development and assessment of an indirect vision training programme for operatory dentistry: Effects on working posture
Objectives Students experience difficulty working with indirect vision and often adopt inadequate working postures because of it. This study created and then assessed the effects of an indirect vision preclinical training program on dental students’ working posture. Methods The study enrolled students in the third year of the five‐year undergraduate program in dentistry in the School of Dentistry of São Paulo State University (UNESP), Araraquara (N=54). The program consisted of four training sessions in which students performed different types of activities in which only a mirror was used to see the procedure they were performing. To evaluate posture, students were asked to perform class III cavity preparations (distal‐palatal and mesial‐palatal preparations) on upper central and lateral incisors in a dental mannequin (tooth numbers 11, 12, 21, and 22) both before and after the indirect vision training program. Photographs were taken of the students’ working postures. The photographs were assessed by a duly trained researcher using the Compliance Assessment of Dental Ergonomic Posture Requirements (CADEP). A descriptive statistical analysis was performed, and the assumptions of normality were verified. Student’s paired t test was also performed. The significance level adopted was 5%. Results A significant difference was found between the percentages of correct ergonomic postures adopted before and after the training program (p=0.039). Conclusions The preclinical training program for indirect vision was found to have a positive effect on the working postures of the students evaluated herein.
- 1 February 2021
- Published by Wiley in European Journal of Dental Education
- Vol. 26 (1) , 36-44
Development and assessment of an indirect vision training programme for operatory dentistry: Effects on working posture
Objectives Students experience difficulty working with indirect vision and often adopt inadequate working postures because of it. This study created and then assessed the effects of an indirect vision preclinical training program on dental students’ working posture. Methods The study enrolled students in the third year of the five‐year undergraduate program in dentistry in the School of Dentistry of São Paulo State University (UNESP), Araraquara (N=54). The program consisted of four training sessions in which students performed different types of activities in which only a mirror was used to see the procedure they were performing. To evaluate posture, students were asked to perform class III cavity preparations (distal‐palatal and mesial‐palatal preparations) on upper central and lateral incisors in a dental mannequin (tooth numbers 11, 12, 21, and 22) both before and after the indirect vision training program. Photographs were taken of the students’ working postures. The photographs were assessed by a duly trained researcher using the Compliance Assessment of Dental Ergonomic Posture Requirements (CADEP). A descriptive statistical analysis was performed, and the assumptions of normality were verified. Student’s paired t test was also performed. The significance level adopted was 5%. Results A significant difference was found between the percentages of correct ergonomic postures adopted before and after the training program (p=0.039). Conclusions The preclinical training program for indirect vision was found to have a positive effect on the working postures of the students evaluated herein.
- 25 September 2020
- Published by Wiley in European Journal of Dental Education
- Vol. 25 (2) , 305-309
Magnification loupes in dentistry: A qualitative study of dental students’ perspectives
Introduction: The nature of the oral operating field makes it a challenge for dentists to work while maintaining musculoskeletal health. Strategies have been studied in recent years to improve visualisation of the operating field, and the use of magnification systems has been recommended for providing additional benefits. Despite the growing body of evidence suggesting that the use of magnification improves visual acuity, the dentist's posture and the quality of dental procedures, few studies have analysed users’ perspectives on these devices in terms of their adaptation process. These types of studies are important because they provide insight into the reality of the adaptation process required by magnification systems so that adjustments and improvements can be made to adapt these systems to the users’ reality. Thus, we sought to explore the perspectives held by second‐year students in an undergraduate dental program on the use of dental loupes during pre‐clinical laboratory activities.Materials and Methods: A total of 24 second‐year dental students participated in semi‐structured interviews exploring their perspectives of wearing dental loupes during their pre‐clinical activities. Data collection and analysis were consistent with the qualitative content analysis methodology. All interview data were analysed using version 10 of the NVivo® analytical software.Results: Participants described that magnification can lead to the improvement of their work postures, hand skills and quality of dental procedures. Nevertheless, they reported a need for an adaptation period and for adjustments to the technical features of the magnification system.Conclusion: The students had positive perspectives on the use of magnification in their dentistry training program, including improvements in posture, hand skills and procedure quality.
- 25 September 2020
- Published by Wiley in European Journal of Dental Education
- Vol. 25 (2) , 305-309
Magnification loupes in dentistry: A qualitative study of dental students’ perspectives
Introduction: The nature of the oral operating field makes it a challenge for dentists to work while maintaining musculoskeletal health. Strategies have been studied in recent years to improve visualisation of the operating field, and the use of magnification systems has been recommended for providing additional benefits. Despite the growing body of evidence suggesting that the use of magnification improves visual acuity, the dentist's posture and the quality of dental procedures, few studies have analysed users’ perspectives on these devices in terms of their adaptation process. These types of studies are important because they provide insight into the reality of the adaptation process required by magnification systems so that adjustments and improvements can be made to adapt these systems to the users’ reality. Thus, we sought to explore the perspectives held by second‐year students in an undergraduate dental program on the use of dental loupes during pre‐clinical laboratory activities.Materials and Methods: A total of 24 second‐year dental students participated in semi‐structured interviews exploring their perspectives of wearing dental loupes during their pre‐clinical activities. Data collection and analysis were consistent with the qualitative content analysis methodology. All interview data were analysed using version 10 of the NVivo® analytical software.Results: Participants described that magnification can lead to the improvement of their work postures, hand skills and quality of dental procedures. Nevertheless, they reported a need for an adaptation period and for adjustments to the technical features of the magnification system.Conclusion: The students had positive perspectives on the use of magnification in their dentistry training program, including improvements in posture, hand skills and procedure quality.
- 20 February 2020
- Published by Wiley in European Journal of Dental Education
- Vol. 24 (3) , 425-432
Implementing magnification during pre‐clinical training: Effects on procedure quality and working posture
Objective: The objective of this study was to evaluate the effects of magnification on the quality of two pre‐clinical procedures, class I cavity preparations and composite resin restorations, and to evaluate the working posture.Methods: This was an experimental laboratory study. The response variables were the quality of cavity preparations and Class I restorations as well as the working posture adopted during the execution of these procedures. The independent variables were the magnification system under four levels (unaided visualisation, the use of a simple loupe, the use of a Galilean loupe and the use of a Keplerian loupe) and the artificial teeth treated. Class I cavity preparations and restorations (N = 320) were performed using standardised procedures, and the quality achieved was evaluated using pre‐established criteria. Working posture was recorded using digital video cameras and was evaluated using the Compliance Assessment of Dental Ergonomic Posture Requirements (CADEP). A two‐factor analysis of variance (ANOVA) and multiple comparison test were performed (α = 0.05).Results: The quality of cavity preparation did not differ significantly amongst the different magnification systems (P = 0.082). Galilean and Keplerian systems had a positive impact on restoration quality only for the left mandibular first molar (P = 0.04). Higher posture scores were observed when Galilean and Keplerian loupes (P = 0.01) were used, regardless of the tooth being treated.Conclusion: The use of Galilean and Keplerian magnification lenses did not affect the quality of the pre‐clinical procedures performed whilst improved the scores of ergonomic posture.
- 20 February 2020
- Published by Wiley in European Journal of Dental Education
- Vol. 24 (3) , 425-432
Implementing magnification during pre‐clinical training: Effects on procedure quality and working posture
Objective: The objective of this study was to evaluate the effects of magnification on the quality of two pre‐clinical procedures, class I cavity preparations and composite resin restorations, and to evaluate the working posture.Methods: This was an experimental laboratory study. The response variables were the quality of cavity preparations and Class I restorations as well as the working posture adopted during the execution of these procedures. The independent variables were the magnification system under four levels (unaided visualisation, the use of a simple loupe, the use of a Galilean loupe and the use of a Keplerian loupe) and the artificial teeth treated. Class I cavity preparations and restorations (N = 320) were performed using standardised procedures, and the quality achieved was evaluated using pre‐established criteria. Working posture was recorded using digital video cameras and was evaluated using the Compliance Assessment of Dental Ergonomic Posture Requirements (CADEP). A two‐factor analysis of variance (ANOVA) and multiple comparison test were performed (α = 0.05).Results: The quality of cavity preparation did not differ significantly amongst the different magnification systems (P = 0.082). Galilean and Keplerian systems had a positive impact on restoration quality only for the left mandibular first molar (P = 0.04). Higher posture scores were observed when Galilean and Keplerian loupes (P = 0.01) were used, regardless of the tooth being treated.Conclusion: The use of Galilean and Keplerian magnification lenses did not affect the quality of the pre‐clinical procedures performed whilst improved the scores of ergonomic posture.
- 23 December 2019
- Published by Wiley in Microscopy Research and Technique
- Vol. 83 (4) , 393-401
Micro‐shear bond strength of adhesives with different degrees of acidity: Effect on sound and artificially hypermineralized dentin
This study evaluates the bond strength of four self‐etching adhesive systems with different acidity levels in normal and artificially hypermineralized dentin substrate. Healthy human molars were divided into groups: normal dentin—N (n = 36) and artificially hypermineralized dentin—H (n = 36). Self‐etching adhesive systems Clearfil S3 Bond (n = 9), Optibond All in One (n = 9), Clearfil SE Bond (n = 9), and Adhese (n = 9) were used for both the N and H groups. Transparent cylindrical matrices were positioned on the treated dentin surfaces, filled with composite resin, and light‐cured for 40 s. After the transparent cylindrical matrices were removed, the specimens were stored for 24 hr in a humid environment at 37°C and were subjected to a micro‐shear bond strength test. For each group, a specimen was prepared and evaluated in scanning electron microscope for adhesive interface observation. Normality was confirmed and the two‐way analysis of variance and Games–Howell post‐tests were conducted (α = .05). The data demonstrated an interaction between the adhesive system and type of dentin substrate (p < .01). For normal dentin, all adhesive systems assessed were adequate; however, in the hypermineralized dentin, the Clearfil SE Bond two‐step self‐etching adhesive system with mild pH presented the highest immediate bond strength. There was a predominance of adhesive failures for all adhesive systems in the different dentin substrates evaluated. It was concluded that the self‐etching adhesive systems evaluated were efficient for both substrates, and for the hypermineralized dentin, the Clearfil SE Bond presented a higher bond strength value.
- 23 December 2019
- Published by Wiley in Microscopy Research and Technique
- Vol. 83 (4) , 393-401
Micro‐shear bond strength of adhesives with different degrees of acidity: Effect on sound and artificially hypermineralized dentin
This study evaluates the bond strength of four self‐etching adhesive systems with different acidity levels in normal and artificially hypermineralized dentin substrate. Healthy human molars were divided into groups: normal dentin—N (n = 36) and artificially hypermineralized dentin—H (n = 36). Self‐etching adhesive systems Clearfil S3 Bond (n = 9), Optibond All in One (n = 9), Clearfil SE Bond (n = 9), and Adhese (n = 9) were used for both the N and H groups. Transparent cylindrical matrices were positioned on the treated dentin surfaces, filled with composite resin, and light‐cured for 40 s. After the transparent cylindrical matrices were removed, the specimens were stored for 24 hr in a humid environment at 37°C and were subjected to a micro‐shear bond strength test. For each group, a specimen was prepared and evaluated in scanning electron microscope for adhesive interface observation. Normality was confirmed and the two‐way analysis of variance and Games–Howell post‐tests were conducted (α = .05). The data demonstrated an interaction between the adhesive system and type of dentin substrate (p < .01). For normal dentin, all adhesive systems assessed were adequate; however, in the hypermineralized dentin, the Clearfil SE Bond two‐step self‐etching adhesive system with mild pH presented the highest immediate bond strength. There was a predominance of adhesive failures for all adhesive systems in the different dentin substrates evaluated. It was concluded that the self‐etching adhesive systems evaluated were efficient for both substrates, and for the hypermineralized dentin, the Clearfil SE Bond presented a higher bond strength value.
- Open Access
- 27 March 2019
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 14 (3) , e0212793
Effect of magnification devices on dental students’ visual acuity
This study aimed to determine dental students’ visual acuity and neck angulation when using magnification devices and distances from the operating field. Forty students from each of the second through fifth years of the five-year program at the School of Dentistry of Araraquara were selected (N = 160). Visual acuity was tested using a miniature Snellen eye chart under five different settings (naked eye; simple loupe; Galilean loupe; Keplerian loupe and an operating microscope). Photographs were taken during the visual acuity exam in order to evaluate the angulation of the subjects’ necks in a neutral posture. The two-factor analysis of variance and the Games-Howell post-hoc test were performed (α = 0.05). A significant difference in visual acuity and neck angulation was found between the "magnification device" and "distance" factors in each of the graduating classes analyzed (p<0.05). At a standardized distance, the Keplerian loupe (535.93±133.69), the Galilean loupe (514.06±171.56), and the operating microscope (517.71±161.61) all provided greater visual acuity. At a subjectively comfortable distance, the Keplerian (521.35±157.99) and Galilean (515.00±156.32) loupes produced the best visual acuity. The angulation of the neck was greater when the simple loupes (56,59±10,88) and naked eye (56.51±13.55) were used at a subjectively comfortable distance. At both a standardized distance and a comfortable distance, the Galilean and Keplerian magnification systems provided the best visual acuity and the lowest angulation of the operator’s neck. At a standardized distance of 30 cm to 40 cm, the operating microscopes produced similar results.
- 27 March 2019
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 14 (3) , e0212793
Open AccessEffect of magnification devices on dental students’ visual acuity
This study aimed to determine dental students’ visual acuity and neck angulation when using magnification devices and distances from the operating field. Forty students from each of the second through fifth years of the five-year program at the School of Dentistry of Araraquara were selected (N = 160). Visual acuity was tested using a miniature Snellen eye chart under five different settings (naked eye; simple loupe; Galilean loupe; Keplerian loupe and an operating microscope). Photographs were taken during the visual acuity exam in order to evaluate the angulation of the subjects’ necks in a neutral posture. The two-factor analysis of variance and the Games-Howell post-hoc test were performed (α = 0.05). A significant difference in visual acuity and neck angulation was found between the "magnification device" and "distance" factors in each of the graduating classes analyzed (p<0.05). At a standardized distance, the Keplerian loupe (535.93±133.69), the Galilean loupe (514.06±171.56), and the operating microscope (517.71±161.61) all provided greater visual acuity. At a subjectively comfortable distance, the Keplerian (521.35±157.99) and Galilean (515.00±156.32) loupes produced the best visual acuity. The angulation of the neck was greater when the simple loupes (56,59±10,88) and naked eye (56.51±13.55) were used at a subjectively comfortable distance. At both a standardized distance and a comfortable distance, the Galilean and Keplerian magnification systems provided the best visual acuity and the lowest angulation of the operator’s neck. At a standardized distance of 30 cm to 40 cm, the operating microscopes produced similar results.
- Open Access
- 1 October 2018
- Published by Georg Thieme Verlag KG in European Journal of Dentistry
- Vol. 12 (04) , 553-558
Effect of adhesive mode and chlorhexidine on microtensile strength of universal bonding agent to sound and caries-affected dentins
Objective: The main objective of this study is to assess the effect of the adhesive mode and chlorhexidine (CHX) on the microtensile strength of a universal bonding agent to sound and caries-affected dentins. Materials and Methods: Six intact third molars and six decayed third molars were sectioned to obtain two middle dentin specimens per tooth. Prime and Bond Elect Universal (Dentsply) was applied to specimens in two different modes: Etch-and-rinse (ER, phosphoric acid for 15s) and self-etch (SE, no phosphoric acid). 2% CHX (Cavity Cleanser, Bisco) was applied to both dentins for 30 s. Specimens were randomly assigned into eight groups (n = 3) according to the treatments applied to sound and caries-affected dentins: SE; ER; SE + CHX; and ER + CHX. All specimens were restored with TPH Spectra High Viscosity (Dentsply) composite resin and sectioned to obtain specimens of 0.8 ± 0.1 mm2. The microtensile bond strength test was conducted at 1 mm/min. The data were statistically analyzed by ANOVA and multiple comparisons' test (α = 0.05). Results: There was no significant difference between sound dentin and caries-affected dentin (P = 0.132). The highest bond strength was obtained with the application of the ER (31.81MPa). SE + CHX promoted the lowest bond strength with no statistical difference to ER + CHX (P > 0.05). Conclusions: ER mode for the universal bonding agent yielded the highest bond strength to sound and caries-affected dentins. CHX reduced the bond strength to both dentins regardless the application of phosphoric acid. Clinical Significance: The universal bonding agent increased the bond strength to sound and caries-affected dentins when applied by the ER mode.
- 1 October 2018
- Published by Georg Thieme Verlag KG in European Journal of Dentistry
- Vol. 12 (04) , 553-558
Open AccessEffect of adhesive mode and chlorhexidine on microtensile strength of universal bonding agent to sound and caries-affected dentins
Objective: The main objective of this study is to assess the effect of the adhesive mode and chlorhexidine (CHX) on the microtensile strength of a universal bonding agent to sound and caries-affected dentins. Materials and Methods: Six intact third molars and six decayed third molars were sectioned to obtain two middle dentin specimens per tooth. Prime and Bond Elect Universal (Dentsply) was applied to specimens in two different modes: Etch-and-rinse (ER, phosphoric acid for 15s) and self-etch (SE, no phosphoric acid). 2% CHX (Cavity Cleanser, Bisco) was applied to both dentins for 30 s. Specimens were randomly assigned into eight groups (n = 3) according to the treatments applied to sound and caries-affected dentins: SE; ER; SE + CHX; and ER + CHX. All specimens were restored with TPH Spectra High Viscosity (Dentsply) composite resin and sectioned to obtain specimens of 0.8 ± 0.1 mm2. The microtensile bond strength test was conducted at 1 mm/min. The data were statistically analyzed by ANOVA and multiple comparisons' test (α = 0.05). Results: There was no significant difference between sound dentin and caries-affected dentin (P = 0.132). The highest bond strength was obtained with the application of the ER (31.81MPa). SE + CHX promoted the lowest bond strength with no statistical difference to ER + CHX (P > 0.05). Conclusions: ER mode for the universal bonding agent yielded the highest bond strength to sound and caries-affected dentins. CHX reduced the bond strength to both dentins regardless the application of phosphoric acid. Clinical Significance: The universal bonding agent increased the bond strength to sound and caries-affected dentins when applied by the ER mode.
- 13 February 2018
- Published by Wiley in European Journal of Dental Education
- Vol. 22 (4) , 209-214
Perception of dental students on risk factors of musculoskeletal disorders
Objective: To evaluate the validity and reliability of the Job Factors Questionnaire, and the influence of gender, academic level and pain/discomfort on dental students’ perception regarding risk factors of musculoskeletal disorders.Methods: One hundred forty‐five dental students from Stony Brook School of Dental Medicine participated voluntarily in this study. The survey was organised in two sections: (i) Job Factors Questionnaire with 15 items that evaluated students’ perceptions about job/study environmental risk factors and their potential contribution to musculoskeletal disorders. The tri‐factorial structure (repetitiveness, work posture and external factors) was used; (ii) Part of the Nordic Questionnaire with questions referring to 9 body areas: Neck, shoulders, upper back, elbows, lower back, wrists/hands, hips, knees and ankles/feet. Students answered if they have had a job‐related pain/discomfort in any of these body areas in the previous 12 months. The data were evaluated statistically by confirmatory factor analysis, convergent and discriminant validities, internal consistency and Z‐test (α = .05).Results: The tri‐factorial structure was considered valid and reliable for the sample after excluding item 8 and inserting correlations between items 11 and 12, and between 14 and 15. The academic level presented a significant effect on the factors “Work Posture” (P = .02) and “External Factors” (P = .01). Most of the students reported pain in their neck (73.79%), lower back (62.06%) and shoulders (53.10%) in the previous 12 months.Conclusion: The Work Posture and External Factors were influenced only by academic level. The lower the students’ academic level, the higher their perception for both factors of musculoskeletal disorders.
- 13 February 2018
- Published by Wiley in European Journal of Dental Education
- Vol. 22 (4) , 209-214
Perception of dental students on risk factors of musculoskeletal disorders
Objective: To evaluate the validity and reliability of the Job Factors Questionnaire, and the influence of gender, academic level and pain/discomfort on dental students’ perception regarding risk factors of musculoskeletal disorders.Methods: One hundred forty‐five dental students from Stony Brook School of Dental Medicine participated voluntarily in this study. The survey was organised in two sections: (i) Job Factors Questionnaire with 15 items that evaluated students’ perceptions about job/study environmental risk factors and their potential contribution to musculoskeletal disorders. The tri‐factorial structure (repetitiveness, work posture and external factors) was used; (ii) Part of the Nordic Questionnaire with questions referring to 9 body areas: Neck, shoulders, upper back, elbows, lower back, wrists/hands, hips, knees and ankles/feet. Students answered if they have had a job‐related pain/discomfort in any of these body areas in the previous 12 months. The data were evaluated statistically by confirmatory factor analysis, convergent and discriminant validities, internal consistency and Z‐test (α = .05).Results: The tri‐factorial structure was considered valid and reliable for the sample after excluding item 8 and inserting correlations between items 11 and 12, and between 14 and 15. The academic level presented a significant effect on the factors “Work Posture” (P = .02) and “External Factors” (P = .01). Most of the students reported pain in their neck (73.79%), lower back (62.06%) and shoulders (53.10%) in the previous 12 months.Conclusion: The Work Posture and External Factors were influenced only by academic level. The lower the students’ academic level, the higher their perception for both factors of musculoskeletal disorders.
- 1 January 2018
- Published by Wiley in Journal of Dental Education
- Vol. 82 (1) , 47-53
Dental Students’ Perceptions of Risk Factors for Musculoskeletal Disorders: Adapting the Job Factors Questionnaire for Dentistry
The aims of this study were to adapt the Job Factors Questionnaire to the field of dentistry, evaluate its psychometric properties, evaluate dental students' perceptions of work/study risk factors for musculoskeletal disorders, and determine the influence of gender and academic level on those perceptions. All 580 students enrolled in two Brazilian dental schools in 2015 were invited to participate in the study. A three-factor structure (Repetitiveness, Work Posture, and External Factors) was tested through confirmatory factor analysis. Convergent validity was estimated using the average variance extracted (AVE), discriminant validity was based on the correlational analysis of the factors, and reliability was assessed. A causal model was created using structural equation modeling to evaluate the influence of gender and academic level on students' perceptions. A total of 480 students completed the questionnaire for an 83% response rate. The responding students' average age was 21.6 years (SD=2.98), and 74.8% were women. Higher scores were observed on the Work Posture factor items. The refined model presented proper fit to the studied sample. Convergent validity was compromised only for External Factors (AVE=0.47), and discriminant validity was compromised for Work Posture and External Factors (r(2)=0.69). Reliability was adequate. Academic level did not have a significant impact on the factors, but the women students exhibited greater perception. Overall, the adaptation resulted in a useful instrument for assessing perceptions of risk factors for musculoskeletal disorders. Gender was found to significantly influence all three factors, with women showing greater perception of the risk factors.
- 1 January 2018
- Published by Wiley in Journal of Dental Education
- Vol. 82 (1) , 47-53
Dental Students’ Perceptions of Risk Factors for Musculoskeletal Disorders: Adapting the Job Factors Questionnaire for Dentistry
The aims of this study were to adapt the Job Factors Questionnaire to the field of dentistry, evaluate its psychometric properties, evaluate dental students' perceptions of work/study risk factors for musculoskeletal disorders, and determine the influence of gender and academic level on those perceptions. All 580 students enrolled in two Brazilian dental schools in 2015 were invited to participate in the study. A three-factor structure (Repetitiveness, Work Posture, and External Factors) was tested through confirmatory factor analysis. Convergent validity was estimated using the average variance extracted (AVE), discriminant validity was based on the correlational analysis of the factors, and reliability was assessed. A causal model was created using structural equation modeling to evaluate the influence of gender and academic level on students' perceptions. A total of 480 students completed the questionnaire for an 83% response rate. The responding students' average age was 21.6 years (SD=2.98), and 74.8% were women. Higher scores were observed on the Work Posture factor items. The refined model presented proper fit to the studied sample. Convergent validity was compromised only for External Factors (AVE=0.47), and discriminant validity was compromised for Work Posture and External Factors (r(2)=0.69). Reliability was adequate. Academic level did not have a significant impact on the factors, but the women students exhibited greater perception. Overall, the adaptation resulted in a useful instrument for assessing perceptions of risk factors for musculoskeletal disorders. Gender was found to significantly influence all three factors, with women showing greater perception of the risk factors.