QLQi Liu

Qi Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qi Liu has a total of 160 co-authors. Here are the top co-authors by number of shared publications:

  • Xiaojuan Chen

    Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, Advanced Catalysis Green Manufacturing Collaborative Innovation Center and School of Petrochemical Engineering, Changzhou University, Changzhou, Jiangsu 213164, China

    17 shared publications
  • Hongren Rong

    16 shared publications
  • Baozhu Yang

    13 shared publications
  • Meiling Cheng

    School of Petrochemical Engineering, Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, and Advanced Catalysis and Green Manufacturing Collaborative Innovation Center Changzhou University 1 Gehu Road, Changzhou Jiangsu 213164, P. R. China

    9 shared publications
  • Haoqi Su

    Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, Advanced Catalysis Green Manufacturing Collaborative Innovation Center and School of Petrochemical Engineering, Changzhou University, 1 Gehu Road, Changzhou, Jiangsu 213164, China

    8 shared publications
  • Hong-Jiang Liu

    Department of Chemistry, College of Science, Shanghai University, Shanghai, People’s Republic of China

    8 shared publications

Latest Publications

  • A carbonyl-rich porous organic polymer cathode for high-performance air self-charging aqueous zinc-ion batteries

    by Fanwen Su, Lihang Lan, Guangchi Sun, Hong Yang, Wentao Dai, Tao Wang, Baozhu Yang, Qi Liu

  • Open Access

    Melt Recrystallization Synthesis of CsPbBr3/Cs4PbBr6@SiO2 Composite Materials for LED application

    by Zhen Bao, Kai Zhao, Yuxin Pan, Zhanpeng Wu, Jixuan Li, Xueping Liao, Xiao Din, Jiangnan Du, Lamu Kangding, Qi Liu

    Metal halide perovskite nanocrystals (PNCs) have been recognized as potential optoelectronic materials due to their excellent optical characteristics. However, its poor stability limits its further practical application, and the research on stability improvement mainly concentrated on green-emitted CsPbBr3 PNCs. Herein, CsPbBr3/Cs4PbBr6 zero-dimensional–three-dimensional composite perovskite nanocrystals were used as the core for encapsulation, stable CsPbBr3/Cs4PbBr6@SiO2 (MD–PNC@SiO2) nanocrystal composite materials were synthesized via the high-temperature melt recrystallization method. By adjusting the sintering temperature, the photoluminescence (PL) intensity and absolute photoluminescence quantum yield (PLQY) of the composite materials were optimized. When the MD–PNC@SiO2–800 composite material was packaged with an LED chip to fabricate a green LED, its luminous intensity remained at 116% of its initial intensity after continuous operation for 486 hours, demonstrating greater application potential than CsPbX3/SiO2 composite materials.

  • Open Access

    A one-dimensional chain cobalt-based coordination polymer as an electrode material for higher-performance supercapacitors

    by Qi Liu, Hongren Rong, Yu Chen, Xiuxiu Liu, Zhiwei Liu, Lihang Lan, Hao Huang

    Electrode materials are one of the major factors influencing the performance of supercapacitors. Due to their porosity and redox active sites, coordination polymers (CPs) have the potential to serve as the electrode materials for supercapacitor. In this study, we prepared a one-dimensional (1D) chain cobalt-based CP {[Co(Hmt)2(tfbdc)(H2O)2]⋅(H2tfbdc)⋅ (EtOH)2}n(Co-HT, Hmt = hexamethylenetetramine, H2tfbdc = tetrafluoroterephthalic acid) as an electrode material of supercapacitors. In a three-electrode device, the Co-HT electrode achieved a specific capacitance of 1010 F g−1 at a current density of 1 A g−1, and retained 93.2% of its initial specific capacitance after 2000 cycles at 2 A g−1. Furthermore, the Co-HT//rGO asymmetric supercapacitor, assembled with a Co-HT electrode as the positive electrode, a reduced graphene oxide (rGO) electrode as the negative electrode, and 6 M KOH as the electrolyte, displayed an energy density of 14.8 Wh kg−1 and a power density of 0.8 kW kg−1 at 1 A g−1 and the capacity stays almost the same after 20,000 cycles. Our work confirms that the 1D CP Co-HT possesses excellent electrochemical performance and is a supercapacitor electrode material with potential for development.

  • Open Access

    A one-dimensional chain cobalt-based coordination polymer as an electrode material for higher-performance supercapacitors

    by Qi Liu, Hongren Rong, Yu Chen, Xiuxiu Liu, Zhiwei Liu, Lihang Lan, Hao Huang

    Electrode materials are one of the major factors influencing the performance of supercapacitors. Due to their porosity and redox active sites, coordination polymers (CPs) have the potential to serve as the electrode materials for supercapacitor. In this study, we prepared a one-dimensional (1D) chain cobalt-based CP {[Co(Hmt)2(tfbdc)(H2O)2]⋅(H2tfbdc)⋅ (EtOH)2}n(Co-HT, Hmt = hexamethylenetetramine, H2tfbdc = tetrafluoroterephthalic acid) as an electrode material of supercapacitors. In a three-electrode device, the Co-HT electrode achieved a specific capacitance of 1010 F g−1 at a current density of 1 A g−1, and retained 93.2% of its initial specific capacitance after 2000 cycles at 2 A g−1. Furthermore, the Co-HT//rGO asymmetric supercapacitor, assembled with a Co-HT electrode as the positive electrode, a reduced graphene oxide (rGO) electrode as the negative electrode, and 6 M KOH as the electrolyte, displayed an energy density of 14.8 Wh kg−1 and a power density of 0.8 kW kg−1 at 1 A g−1 and the capacity stays almost the same after 20,000 cycles. Our work confirms that the 1D CP Co-HT possesses excellent electrochemical performance and is a supercapacitor electrode material with potential for development.

  • Open Access

    Nitrogen-rich polycarbonyl porous organic polymer as a cathode material for air-rechargeable aqueous Zn-ion batteries

    by Qi Liu, Lihang Lan, Xiuting Song, Fanwen Su, Wentao Dai, Tao Wang, Baozhu Yang, Hongjiang Liu

    As a self-powered device, aqueous Zn-ion batteries (AZIBs) with air-charging capability have demonstrated application prospects in special situations where there is a lack of power supply. In order to develop AZIBs with superior air-rechargeable capability, choosing the appropriate cathode materials is key. Herein, a new nitrogen-rich porous organic polymer (POP) with carbonyl-rich (HTTH-POP) was synthesized. The coin-type AZIB constructed with the HTTH-POP cathode demonstrates higher discharge specific capacity (395 mAh g-1 at 0.05 A g-1), higher energy density (121.87 Wh kg-1), and better cycle stability (capacity retention of 75% after 1000 cycles at 2 A g-1). Meanwhile, the flexible Zn//HTTH-POP AZIB displays high-rate performance (discharge capacity of 144 mAh g-1 at 20 A g-1) as well as excellent flexibility and folding. Note worthily, O2 in air can oxidize the discharged HTTH-POP electrode, resulting in flexible Zn//HTTH-POP exhibits impressive air-rechargeable capability. The flexible battery after air-recharge for 21 h exhibits an initial discharge capacity of 375 mAh g-1 (0.5 A g-1) and can accumulated deliver a discharge capacity of 2321 mAh g-1 via 11 cycles without obviously capacity decay. Furthermore, it can freely switch between constant current charge-discharge and air-charging modes. Various ex-situ characterizations and DFT calculation reveal the energy storage and air-charging processes of Zn//HTTH-POP battery all relate to the participation of Zn2+ and H+. This study offers a new strategy for the future development of high-performance AZIBs with excellent air-charging performance.

  • Synergistic mesoporous silica confinement and PMMA encapsulation enabling highly stable CsPbX 3 composite films for wide-color-gamut backlighting

    by Yuxin Pan, Guangrui Shi, Zhen Bao, Qi Liu

    SBA-15 confinement and PMMA sealing synergistically suppress anion exchange and improve water and spectral stability in CsPbX 3 tricolor systems. The fabricated white LEDs achieve 131% NTSC gamut, showing promising potential for backlight displays.

  • Open Access

    High-performance aqueous zinc-ion hybrid supercapacitors enabled by zinc and manganese atoms dispersed N-doped carbon

    by Qi Liu, Mengnan Wang, Yinghua Wei, Zhanpeng Wu, Zhiwei Liu, Hongren Rong

    As a hybrid energy storage device that combines the advantages of both batteries and supercapacitors, zinc-ion hybrid supercapacitors (ZIHSCs) present an application promising in next generation energy storage technologies. In ZIHSCs, the cathode material plays a critical role in determining the electrochemical performance of ZIHSCs. Therefore, rational structural design and electrochemical performance optimization of the cathode material are essential. In this study, four Zn and Mn atomically dispersed nitrogen-doped carbon materials (ZnMn As/NC-n, n stands for molar ratio of Zn/Mn) were prepared by calcining four metal–organic frameworks (MOFs) precursors with different Zn/Mn molar ratios. Electrochemical evaluations revealed that ZnMn As/NC-1.5 exhibited the best performance in a three-electrode system, achieving a high specific capacitance of 195.4 F g−1 at 0.1 A g−1 and maintaining 72.4 F g−1 at 10 A g−1. Impressively, a ZIHSC (Zn//ZnMn As/NC-1.5), as a two-electrode configuration built by the Zn anode and the ZnMn As/NC-1.5 cathode, delivered a maximum specific capacitance of 404.6 F g−1, a high energy density of 143.9 Wh kg−1, and a peak power density of 16 kW kg−1, while maintaining 98% of its capacity after 20,000 cycles. Moreover, the assembled Zn//ZnMn As/NC-1.5 flexible device not only presented higher maximum volumetric energy density and volumetric power density (56.4 mWh cm−3 and 1.19 W cm−3), but also demonstrated outstanding mechanical flexibility and practical applicability, highlighting the great potential of the material for next-generation wearable energy storage systems.

  • Open Access

    Nitrogen-rich polycarbonyl porous organic polymer as a cathode material for air-rechargeable aqueous Zn-ion batteries

    by Qi Liu, Lihang Lan, Xiuting Song, Fanwen Su, Baozhu Yang, Wentao Dai, Tao Wang, Hongjiang Liu

    As a self-powered device, aqueous Zn-ion batteries (AZIBs) with air-charging capability have demonstrated application prospects in special situations where there is a lack of power supply. In order to develop AZIBs with superior air-rechargeable capability, choosing the appropriate cathode materials is key. Herein, a new nitrogen-rich porous organic polymer (POP) with carbonyl-rich (HTTH-POP) was synthesized. The coin-type AZIB constructed with the HTTH-POP cathode demonstrates higher discharge specific capacity (395 mAh g-1 at 0.05 A g-1), higher energy density (121.87 Wh kg-1), and better cycle stability (capacity retention of 75% after 1000 cycles at 2 A g-1). Meanwhile, the flexible Zn//HTTH-POP AZIB displays high-rate performance (discharge capacity of 144 mAh g-1 at 20 A g-1) as well as excellent flexibility and folding. Note worthily, O2 in air can oxidize the discharged HTTH-POP electrode, resulting in flexible Zn//HTTH-POP exhibits impressive air-rechargeable capability. The flexible battery after air-recharge for 21 h exhibits an initial discharge capacity of 375 mAh g-1 (0.5 A g-1) and can accumulated deliver a discharge capacity of 2321 mAh g-1 via 11 cycles without obviously capacity decay. Furthermore, it can freely switch between constant current charge-discharge and air-charging modes. Various ex-situ characterizations and DFT calculation reveal the energy storage and air-charging processes of Zn//HTTH-POP battery all relate to participation of Zn2+ and H+. This study offers a new strategy for the future development of high-performance AZIBs with excellent air-charging performance.