Hong-Jiang Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hong-Jiang Liu has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Qi Liu
Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, Advanced Catalysis Green Manufacturing Collaborative Innovation Center and School of Petrochemical Engineering, Changzhou University, 1 Gehu Road, Changzhou, Jiangsu 213164, China
8 shared publications Yidan Song
Changzhou University
5 shared publicationsYuanrui Gao
Department of Chemistry, College of Science, Shanghai University, P. R. China
5 shared publicationsChangdong Shi
School of Petrochemical Engineering, Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, and Advanced Catalysis and Green Manufacturing Collaborative Innovation Center, Changzhou University , 1 Gehu Road, Changzhou, Jiangsu 213164, P. R. China
4 shared publicationsChongling Cheng
Nano-Science & Technology Research Center Shanghai University Shanghai 200444, P. R. China
3 shared publicationsHongren Rong
Changzhou University
3 shared publications
Latest Publications
- 8 January 2026
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 708, 139825
High-performance aqueous zinc-ion batteries with air self-charging capability based on azo-based covalent organic frameworks
- 8 January 2026
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 708, 139825
High-performance aqueous zinc-ion batteries with air self-charging capability based on azo-based covalent organic frameworks
- 26 April 2023
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 52 (21) , 7079-7087
A one-dimensional cobalt-based coordination polymer as a cathode material of lithium-ion batteries
A 1D cobalt-based MOF [Co(4-DTBPT)(DMF) 2 (H 2 O) 2 ](4-DTBPT)(Co-DTBPT) was synthesized. The lithium-ion battery based Co-DTBPT cathode exhibits excellent cycling stability.
- 26 April 2023
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 52 (21) , 7079-7087
A one-dimensional cobalt-based coordination polymer as a cathode material of lithium-ion batteries
A 1D cobalt-based MOF [Co(4-DTBPT)(DMF) 2 (H 2 O) 2 ](4-DTBPT)(Co-DTBPT) was synthesized. The lithium-ion battery based Co-DTBPT cathode exhibits excellent cycling stability.
- 12 February 2019
- Published by Springer Nature in Ionics
- Vol. 25 (7) , 2987-2995
Graphene oxide linked with N, N′-diamino-1,4,5,8-naphthalenetetracarboxylic bisimide as a stable cathode material for lithium-ion batteries
- 12 February 2019
- Published by Springer Nature in Ionics
- Vol. 25 (7) , 2987-2995
Graphene oxide linked with N, N′-diamino-1,4,5,8-naphthalenetetracarboxylic bisimide as a stable cathode material for lithium-ion batteries
- 11 January 2018
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 2 (4) , 803-810
Functionalization of graphene oxide with naphthalenediimide diamine for high-performance cathode materials of lithium-ion batteries
Through the covalent bonding between naphthalenediimide diamine (NDIDA) and graphene oxide (GO), we synthesize NDIDA-functionalized graphene oxide (NDIDA-GO). The as-synthesized NDIDA-GO is characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, Raman spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, and the Brunauer–Emmett–Teller surface area analysis. As a cathode material for lithium-ion batteries, within a voltage window of 4.5–1.5 V, NDIDA-GO exhibits a high specific capacity, good cyclic stability, and rate capability, keeping a specific capacity of 240 mA h g−1 after 50 cycles at 50 mA g−1. This work provides an effective route for the development of high-performance organic-based cathode materials for lithium-ion batteries.
- 11 January 2018
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 2 (4) , 803-810
Functionalization of graphene oxide with naphthalenediimide diamine for high-performance cathode materials of lithium-ion batteries
Through the covalent bonding between naphthalenediimide diamine (NDIDA) and graphene oxide (GO), we synthesize NDIDA-functionalized graphene oxide (NDIDA-GO). The as-synthesized NDIDA-GO is characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, Raman spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, and the Brunauer–Emmett–Teller surface area analysis. As a cathode material for lithium-ion batteries, within a voltage window of 4.5–1.5 V, NDIDA-GO exhibits a high specific capacity, good cyclic stability, and rate capability, keeping a specific capacity of 240 mA h g−1 after 50 cycles at 50 mA g−1. This work provides an effective route for the development of high-performance organic-based cathode materials for lithium-ion batteries.
- 9 January 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (2) , 348-353
High Tap Density Li 4 Ti 5 O 12 Anode Materials Synthesized for High Rate Performance Lithium Ion Batteries
We report a simple strategy to synthesize high tap density Li 4 Ti 5 O 12 particles with excellent electrochemical performance, whose tap density could be controlled by the starting materials. A series of high tap density Li 4 Ti 5 O 12 particles are successfully synthesized with high tap density TiO 2 through hydrothermal process with a short post‐annealing. The electrochemistry performances of them were carefully researched in this work. The high tap density Li 4 Ti 5 O 12 showed similar performance with normal Li 4 Ti 5 O 12 particles. The highest tap density of Li 4 Ti 5 O 12 particles is 1.4 g⋅cm −3 , whose capacity is 134 mAh⋅g −1 at 10 C. Those high tap density Li 4 Ti 5 O 12 display their promising commercial application in high‐energy density lithium ion batteries.
- 9 January 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (2) , 348-353
High Tap Density Li 4 Ti 5 O 12 Anode Materials Synthesized for High Rate Performance Lithium Ion Batteries
We report a simple strategy to synthesize high tap density Li 4 Ti 5 O 12 particles with excellent electrochemical performance, whose tap density could be controlled by the starting materials. A series of high tap density Li 4 Ti 5 O 12 particles are successfully synthesized with high tap density TiO 2 through hydrothermal process with a short post‐annealing. The electrochemistry performances of them were carefully researched in this work. The high tap density Li 4 Ti 5 O 12 showed similar performance with normal Li 4 Ti 5 O 12 particles. The highest tap density of Li 4 Ti 5 O 12 particles is 1.4 g⋅cm −3 , whose capacity is 134 mAh⋅g −1 at 10 C. Those high tap density Li 4 Ti 5 O 12 display their promising commercial application in high‐energy density lithium ion batteries.
- 21 September 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (19) , 11603-11609
One-Dimensional Zinc-Based Coordination Polymer as a Higher Capacity Anode Material for Lithium Ion Batteries
A zinc-based one-dimensional (1D) coordination polymer ([Zn(H2mpca)2(tfbdc)(H2O)], Zn-ODCP) has been synthesized and characterized by spectroscopic and physicochemical methods, single-crystal X-ray diffraction, and thermogravimetric analysis (H2mpca = 3-methyl-1H-pyrazole-4-carboxylic acid; H2tfbdc = 2,3,5,6-tetrafluoroterephthalic acid). Zn-ODCP shows blue luminescence in the solid state. When Zn-ODCP acts as an anode material for lithium ion batteries, it exhibits a good cyclic stability and a higher reversible capacity of 300 mAh g–1 at 50 mA g–1 after 50 cycles. The higher capacity may be mainly ascribed to the metal ion and ligand all taking part in lithium storage. Searching for electrode materials of lithium ion batteries from 1D metal coordination polymers is a new route.
- 21 September 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (19) , 11603-11609
One-Dimensional Zinc-Based Coordination Polymer as a Higher Capacity Anode Material for Lithium Ion Batteries
A zinc-based one-dimensional (1D) coordination polymer ([Zn(H2mpca)2(tfbdc)(H2O)], Zn-ODCP) has been synthesized and characterized by spectroscopic and physicochemical methods, single-crystal X-ray diffraction, and thermogravimetric analysis (H2mpca = 3-methyl-1H-pyrazole-4-carboxylic acid; H2tfbdc = 2,3,5,6-tetrafluoroterephthalic acid). Zn-ODCP shows blue luminescence in the solid state. When Zn-ODCP acts as an anode material for lithium ion batteries, it exhibits a good cyclic stability and a higher reversible capacity of 300 mAh g–1 at 50 mA g–1 after 50 cycles. The higher capacity may be mainly ascribed to the metal ion and ligand all taking part in lithium storage. Searching for electrode materials of lithium ion batteries from 1D metal coordination polymers is a new route.
- 20 April 2017
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 21 (8) , 2415-2423
Nickel metal-organic framework nanoparticles as electrode materials for Li-ion batteries and supercapacitors
- 20 April 2017
- Published by Springer Nature in Journal of Solid State Electrochemistry
- Vol. 21 (8) , 2415-2423
Nickel metal-organic framework nanoparticles as electrode materials for Li-ion batteries and supercapacitors
- 10 December 2016
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 18 (12) , 1-10
Nanoscale zinc-based metal-organic framework with high capacity for lithium-ion batteries
- 10 December 2016
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 18 (12) , 1-10
Nanoscale zinc-based metal-organic framework with high capacity for lithium-ion batteries
- 8 January 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (6) , 4442-4447
Synthesis of cobalt-based layered coordination polymer nanosheets and their application in lithium-ion batteries as anode materials
Layered cobalt-based coordination polymer ([Co(tfbdc) (4,4′-bpy)(H2O)2], Co-LCP) nanosheets have been synthesized, which show an excellent performance as anode materials for lithium ion batteries.
- 8 January 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (6) , 4442-4447
Synthesis of cobalt-based layered coordination polymer nanosheets and their application in lithium-ion batteries as anode materials
Layered cobalt-based coordination polymer ([Co(tfbdc) (4,4′-bpy)(H2O)2], Co-LCP) nanosheets have been synthesized, which show an excellent performance as anode materials for lithium ion batteries.
- 30 October 2015
- Published by The Korean Powder Metallurgy & Materials Institute in Journal of Powder Materials
- Vol. 22 (5) , 315-320
Using Carboxylmethylated Cellulose as Water-Borne Binder to Enhance the Electrochemical Properties of Li4Ti5O12-Based Anodes
- 30 October 2015
- Published by The Korean Powder Metallurgy & Materials Institute in Journal of Powder Materials
- Vol. 22 (5) , 315-320
Using Carboxylmethylated Cellulose as Water-Borne Binder to Enhance the Electrochemical Properties of Li4Ti5O12-Based Anodes