Sholpan S. Itkulova
Research Subjects
Sholpan S. Itkulova has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Yerzhan A. Boleubayev
D.V. Sokolsky Institute of Fuel, Catalysis and Electrochemistry, 142, Kunaev str., Almaty 050010, Kazakhstan
9 shared publications - Kirill A. Valishevskiy
DV Sokolsky Inst Fuel Catalysis & Electrochem, Alma Ata, Kazakhstan
4 shared publications - Makpal A. Zhumash
D.V. Sokolsky Institute of Fuel, Catalysis and Electrochemistry, 142, Kunaev str., Almaty 050010, Kazakhstan
4 shared publications G. D. Zakumbaeva
The Institute of Organic Catalysis & Electrochemistry of the Ministry of Education & Science of the Republic of Kazakstan, 142 Kunaev str., Almaty, 480100, Kazakstan
2 shared publicationsGaukhar D. Zakumbaeva
D.V. Sokolsky Institute of Organic Catalysis and Electrochemistry (IOCE)
2 shared publications- Kuralay T. Tilegen
D.V. Sokolsky Institute of Fuel, Catalysis and Electrochemistry, 142, Kunaev str., Almaty 050010, Kazakhstan
2 shared publications
Latest Publications
- Open Access
Syngas Production by Dry and Steam Reforming of a Model Biogas over Highly Active Bimetallic Co-Ir/Al2O3 Catalysts
Cobalt-based catalysts using aluminum oxide as a support and 0.025–0.10 wt.% iridium as a second metal were prepared by the impregnation method and tested in steam and dry reforming of a model biogas with a ratio of CH4:CO2 = 1:1. The processes were carried out in a fixed bed flow reactor under atmospheric pressure with a gas hourly space velocity of 1000–1500 h−1, and temperature varied in the range of 300–800 °C. The BET surface area, XRD, SEM, TEM, and H2-TPR methods were conducted to characterize the physicochemical properties of the “fresh” and “spent” samples of catalysts. The catalysts exhibit high and stable activity in the production of syngas from the biogas. Methane was almost completely converted at 750–800 °C in the steam reforming of biogas. Stability tests over 80–100 h confirmed the catalyst’s stable operation. Syngas with a ratio of H2/CO~0.9 is formed in dry reforming of biogas, while in steam reforming the ratio exceeds 1. It is believed that the addition of iridium to Co/Al2O3 causes improvement of catalyst performance due to a synergetic effect because of the interaction between Co and Ir.
Open AccessSyngas Production by Dry and Steam Reforming of a Model Biogas over Highly Active Bimetallic Co-Ir/Al2O3 Catalysts
Cobalt-based catalysts using aluminum oxide as a support and 0.025–0.10 wt.% iridium as a second metal were prepared by the impregnation method and tested in steam and dry reforming of a model biogas with a ratio of CH4:CO2 = 1:1. The processes were carried out in a fixed bed flow reactor under atmospheric pressure with a gas hourly space velocity of 1000–1500 h−1, and temperature varied in the range of 300–800 °C. The BET surface area, XRD, SEM, TEM, and H2-TPR methods were conducted to characterize the physicochemical properties of the “fresh” and “spent” samples of catalysts. The catalysts exhibit high and stable activity in the production of syngas from the biogas. Methane was almost completely converted at 750–800 °C in the steam reforming of biogas. Stability tests over 80–100 h confirmed the catalyst’s stable operation. Syngas with a ratio of H2/CO~0.9 is formed in dry reforming of biogas, while in steam reforming the ratio exceeds 1. It is believed that the addition of iridium to Co/Al2O3 causes improvement of catalyst performance due to a synergetic effect because of the interaction between Co and Ir.
- Open Access
- 23 June 2026
- Published by MDPI AG in Preprints.org
Syngas Production by Dry and Steam Reforming of a Model Biogas over the Highly Active Bimetallic Co-Ir/Al2O3 Catalysts
Cobalt-based catalysts using aluminum oxide as a support and 0.025-0.10 wt.% iridium as a second metal were prepared by the impregnation method and tested in steam and dry reforming of a model biogas with a ratio of CH4:CO2=1:1. The processes were carried out in a fixed bed flow reactor under atmospheric pressure, a gas hourly space velocity of 1000-1500 h-1, and temperature varied in the range of 300-800 ºC. The BET surface area, XRD, SEM, TEM, and H2-TPR methods were used to characterize the physicochemical properties of the “fresh” and “spent” samples of catalysts. The catalysts exhibit high and stable activity in the production of syngas from the biogas. Methane was almost completely converted at 750-800ºC in the steam reforming of biogas. Stability tests over 80-100 hours confirmed the catalyst's stable operation. Syngas with a ratio of H2/CO ~ 0.9 is formed in dry reforming of biogas, while in steam reforming the ratio exceeds 1. It is believed that the addition of iridium to Co/Al2O3 causes the improvement of the catalyst performance due to a synergetic effect because of the interaction between Co and Ir.
- 23 June 2026
- Published by MDPI AG in Preprints.org
Open AccessSyngas Production by Dry and Steam Reforming of a Model Biogas over the Highly Active Bimetallic Co-Ir/Al2O3 Catalysts
Cobalt-based catalysts using aluminum oxide as a support and 0.025-0.10 wt.% iridium as a second metal were prepared by the impregnation method and tested in steam and dry reforming of a model biogas with a ratio of CH4:CO2=1:1. The processes were carried out in a fixed bed flow reactor under atmospheric pressure, a gas hourly space velocity of 1000-1500 h-1, and temperature varied in the range of 300-800 ºC. The BET surface area, XRD, SEM, TEM, and H2-TPR methods were used to characterize the physicochemical properties of the “fresh” and “spent” samples of catalysts. The catalysts exhibit high and stable activity in the production of syngas from the biogas. Methane was almost completely converted at 750-800ºC in the steam reforming of biogas. Stability tests over 80-100 hours confirmed the catalyst's stable operation. Syngas with a ratio of H2/CO ~ 0.9 is formed in dry reforming of biogas, while in steam reforming the ratio exceeds 1. It is believed that the addition of iridium to Co/Al2O3 causes the improvement of the catalyst performance due to a synergetic effect because of the interaction between Co and Ir.
- Open Access
- 30 November 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (23) , 1814
Syngas Production over Nanosized Multicomponent Co-Fe-Containing Catalysts
Carbon dioxide reforming of methane is a promising technology to recycle and reduce greenhouse gases (CH4, CO2) into valuable chemicals and fuels. The Co-Fe catalysts modified with a small amount of Pt and supported on alumina were designed to be explored in dry reforming (DRM) and combined CO2-steam reforming (bireforming, BRM) of methane to produce syngas. The catalysts were characterized by physico-chemical methods (i.e., BET, XRD, TEM, SEM, and TPR-H2). The synthesized catalysts are the X-ray amorphous nanosized materials with particle sizes of less than 30 nm. The processes were carried out using a feed of CH4/CO2/H2O = 1/1/0–0.5 at varying temperature (400–800 °C) at atmospheric pressure and GHSV = 1000 h−1. The combination of Co and Fe in varying ratios with Pt allowed for high activity and selectivity to be maintained. Extents of methane and CO2 conversion are varied within a range of 79.5–97.5 and 64.2–85.2%, respectively, at 700–800 °C, while the H2/CO ratio in the resulting syngas ranged from 0.98 to 1.30, depending on the catalyst and feed composition. Stability tests conducted for up to 80 h on stream showed no loss of activity of the 10%Co-Fe-Pt/Al2O3 catalysts in BRM. We believe that high activity of the synthesized catalysts occurs due to synergy in the Co-Fe-Pt system.
- 30 November 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (23) , 1814
Open AccessSyngas Production over Nanosized Multicomponent Co-Fe-Containing Catalysts
Carbon dioxide reforming of methane is a promising technology to recycle and reduce greenhouse gases (CH4, CO2) into valuable chemicals and fuels. The Co-Fe catalysts modified with a small amount of Pt and supported on alumina were designed to be explored in dry reforming (DRM) and combined CO2-steam reforming (bireforming, BRM) of methane to produce syngas. The catalysts were characterized by physico-chemical methods (i.e., BET, XRD, TEM, SEM, and TPR-H2). The synthesized catalysts are the X-ray amorphous nanosized materials with particle sizes of less than 30 nm. The processes were carried out using a feed of CH4/CO2/H2O = 1/1/0–0.5 at varying temperature (400–800 °C) at atmospheric pressure and GHSV = 1000 h−1. The combination of Co and Fe in varying ratios with Pt allowed for high activity and selectivity to be maintained. Extents of methane and CO2 conversion are varied within a range of 79.5–97.5 and 64.2–85.2%, respectively, at 700–800 °C, while the H2/CO ratio in the resulting syngas ranged from 0.98 to 1.30, depending on the catalyst and feed composition. Stability tests conducted for up to 80 h on stream showed no loss of activity of the 10%Co-Fe-Pt/Al2O3 catalysts in BRM. We believe that high activity of the synthesized catalysts occurs due to synergy in the Co-Fe-Pt system.
- 15 December 2023
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 138 (6) , 168-178
SYNGAS PRODUCTION BY DRY REFORMING AND BI-REFORMING OF METHANE OVER SOL-GEL MADE Со-Rh/AL2O3 BIMETALLIC CATALYSTS
- 15 December 2023
- Published by Oil Research and Engineering Center of the National Engineering Academy of the Republic of Kazakhstan in Neft i Gaz
- Vol. 138 (6) , 168-178
SYNGAS PRODUCTION BY DRY REFORMING AND BI-REFORMING OF METHANE OVER SOL-GEL MADE Со-Rh/AL2O3 BIMETALLIC CATALYSTS
- Open Access
Catalytic Oxidation of Phosphine by Aqueous Copper–Ammonia Complexes
The furnace gas resulting from the electrothermal production of yellow phosphorus contains up to 95% CO, 2% O2, 2% H2, and 0.3–4.0% impurities, including phosphine (PH3), yellow phosphorus (P4), and hydrogen sulphide (H2S), which are characterized by flammability, explosion hazardousness, corrosiveness, and high toxicity. The presence of toxic impurities does not allow the use of waste gases from phosphorus production, which are mainly composed of valuable carbon monoxide, as chemical raw materials and/or process fuel. The authors propose a method for the purification of furnace gas from the main toxic component, phosphine, by its oxidisation using aqueous copper–ammonia complexes as a catalyst. This approach allows the cleaning process to be conducted under mild conditions. The degree of purification of the model furnace gas from P components is 90–99%, depending on the process conditions.
Open AccessCatalytic Oxidation of Phosphine by Aqueous Copper–Ammonia Complexes
The furnace gas resulting from the electrothermal production of yellow phosphorus contains up to 95% CO, 2% O2, 2% H2, and 0.3–4.0% impurities, including phosphine (PH3), yellow phosphorus (P4), and hydrogen sulphide (H2S), which are characterized by flammability, explosion hazardousness, corrosiveness, and high toxicity. The presence of toxic impurities does not allow the use of waste gases from phosphorus production, which are mainly composed of valuable carbon monoxide, as chemical raw materials and/or process fuel. The authors propose a method for the purification of furnace gas from the main toxic component, phosphine, by its oxidisation using aqueous copper–ammonia complexes as a catalyst. This approach allows the cleaning process to be conducted under mild conditions. The degree of purification of the model furnace gas from P components is 90–99%, depending on the process conditions.
- Open Access
Bimetallic Co-Rh Systems as a Prospective Base for Design of CH4 Reforming Catalysts to Produce Syngas with a Controllable Composition
Dry and bireforming (CO2-H2O) of methane are the most environmentally friendly routes involving two main greenhouse gases to produce syngas—an important building block for large-scale production of various commodity chemicals. The main drawback preventing their industrial application is the coke formation. Developing catalysts that do not favour or are resistant to coke formation is the only way to improve the catalyst stability. Designing an economically viable catalyst may be achieved by exploiting the synergic effects of combining noble (expensive but coke-resistant) and non-noble (cheap but prone to carbonisation) metals to form highly effective catalysts. This work deals with development of highly active and stable bimetallic Co-containing catalysts modified with small amount of Rh, 0.1–0.5 mass %. The catalysts were characterised by BET, XRD, TEM, SEM, XPS, and TPR-H2 methods and tested in dry, bi-, and for comparison in steam reforming of methane. It was revealed that the bimetallic Co-Rh systems is much more effective than monometallic ones due to Co-Rh interaction accompanied with increasing dispersion and reducibility of Co. The extents of CH4 and CO2 conversion over the 5%Co-Rh/Al2O3 are varied within 85–99%. Syngas with variable H2/CO = 0.9–3.9 was formed. No loss of activity was observed for 100 h of long-term stability test.
Open AccessBimetallic Co-Rh Systems as a Prospective Base for Design of CH4 Reforming Catalysts to Produce Syngas with a Controllable Composition
Dry and bireforming (CO2-H2O) of methane are the most environmentally friendly routes involving two main greenhouse gases to produce syngas—an important building block for large-scale production of various commodity chemicals. The main drawback preventing their industrial application is the coke formation. Developing catalysts that do not favour or are resistant to coke formation is the only way to improve the catalyst stability. Designing an economically viable catalyst may be achieved by exploiting the synergic effects of combining noble (expensive but coke-resistant) and non-noble (cheap but prone to carbonisation) metals to form highly effective catalysts. This work deals with development of highly active and stable bimetallic Co-containing catalysts modified with small amount of Rh, 0.1–0.5 mass %. The catalysts were characterised by BET, XRD, TEM, SEM, XPS, and TPR-H2 methods and tested in dry, bi-, and for comparison in steam reforming of methane. It was revealed that the bimetallic Co-Rh systems is much more effective than monometallic ones due to Co-Rh interaction accompanied with increasing dispersion and reducibility of Co. The extents of CH4 and CO2 conversion over the 5%Co-Rh/Al2O3 are varied within 85–99%. Syngas with variable H2/CO = 0.9–3.9 was formed. No loss of activity was observed for 100 h of long-term stability test.
- 15 August 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 4 (442) , 112-119
BIMETALLIC Co-Pd CATALYSTS FOR DRY AND BIREFORMING OF METHANE
- 15 August 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 4 (442) , 112-119
BIMETALLIC Co-Pd CATALYSTS FOR DRY AND BIREFORMING OF METHANE
- 15 December 2019
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 6 (438) , 70-78
METHANE CONVERSION OVER Mo/Al2O3 – CATALYSTS MODIFIED WITH ADDITIVES OF ZEOLITE AND PHOSPHOROUS
- 15 December 2019
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 6 (438) , 70-78
METHANE CONVERSION OVER Mo/Al2O3 – CATALYSTS MODIFIED WITH ADDITIVES OF ZEOLITE AND PHOSPHOROUS
- 15 August 2019
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 4 (436) , 12-18
WATER-GAS SHIFT REACTION OVER THE POLYMETALIC Fe-CONTAINING SUPPORTED CATALYSTS
- 15 August 2019
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 4 (436) , 12-18
WATER-GAS SHIFT REACTION OVER THE POLYMETALIC Fe-CONTAINING SUPPORTED CATALYSTS