MZMakpal A. Zhumash

Makpal A. Zhumash

*This is an algorithmically generated author record based on publicly available information.

Makpal A. Zhumash has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Syngas Production by Dry and Steam Reforming of a Model Biogas over Highly Active Bimetallic Co-Ir/Al2O3 Catalysts

    by Sholpan S. Itkulova, Yerzhan Y. Nurmakanov, Yerzhan A. Boleubayev, Makpal A. Zhumash, Kuralay T. Tilegen

    Cobalt-based catalysts using aluminum oxide as a support and 0.025–0.10 wt.% iridium as a second metal were prepared by the impregnation method and tested in steam and dry reforming of a model biogas with a ratio of CH4:CO2 = 1:1. The processes were carried out in a fixed bed flow reactor under atmospheric pressure with a gas hourly space velocity of 1000–1500 h−1, and temperature varied in the range of 300–800 °C. The BET surface area, XRD, SEM, TEM, and H2-TPR methods were conducted to characterize the physicochemical properties of the “fresh” and “spent” samples of catalysts. The catalysts exhibit high and stable activity in the production of syngas from the biogas. Methane was almost completely converted at 750–800 °C in the steam reforming of biogas. Stability tests over 80–100 h confirmed the catalyst’s stable operation. Syngas with a ratio of H2/CO~0.9 is formed in dry reforming of biogas, while in steam reforming the ratio exceeds 1. It is believed that the addition of iridium to Co/Al2O3 causes improvement of catalyst performance due to a synergetic effect because of the interaction between Co and Ir.

  • Open Access

    Syngas Production by Dry and Steam Reforming of a Model Biogas over the Highly Active Bimetallic Co-Ir/Al2O3 Catalysts

    by Sholpan S. Itkulova, Yerzhan Y. Nurmakanov, Yerzhan A. Boleubayev, Makpal A. Zhumash, Kuralay T. Tilegen

    Cobalt-based catalysts using aluminum oxide as a support and 0.025-0.10 wt.% iridium as a second metal were prepared by the impregnation method and tested in steam and dry reforming of a model biogas with a ratio of CH4:CO2=1:1. The processes were carried out in a fixed bed flow reactor under atmospheric pressure, a gas hourly space velocity of 1000-1500 h-1, and temperature varied in the range of 300-800 ºC. The BET surface area, XRD, SEM, TEM, and H2-TPR methods were used to characterize the physicochemical properties of the “fresh” and “spent” samples of catalysts. The catalysts exhibit high and stable activity in the production of syngas from the biogas. Methane was almost completely converted at 750-800ºC in the steam reforming of biogas. Stability tests over 80-100 hours confirmed the catalyst's stable operation. Syngas with a ratio of H2/CO ~ 0.9 is formed in dry reforming of biogas, while in steam reforming the ratio exceeds 1. It is believed that the addition of iridium to Co/Al2O3 causes the improvement of the catalyst performance due to a synergetic effect because of the interaction between Co and Ir.

  • Open Access

    Syngas Production over Nanosized Multicomponent Co-Fe-Containing Catalysts

    by Kuralay T. Tilegen, Sholpan S. Itkulova, Makpal A. Zhumash, Yerzhan A. Boleubayev, Arlan Z. Abilmagzhanov

    Carbon dioxide reforming of methane is a promising technology to recycle and reduce greenhouse gases (CH4, CO2) into valuable chemicals and fuels. The Co-Fe catalysts modified with a small amount of Pt and supported on alumina were designed to be explored in dry reforming (DRM) and combined CO2-steam reforming (bireforming, BRM) of methane to produce syngas. The catalysts were characterized by physico-chemical methods (i.e., BET, XRD, TEM, SEM, and TPR-H2). The synthesized catalysts are the X-ray amorphous nanosized materials with particle sizes of less than 30 nm. The processes were carried out using a feed of CH4/CO2/H2O = 1/1/0–0.5 at varying temperature (400–800 °C) at atmospheric pressure and GHSV = 1000 h−1. The combination of Co and Fe in varying ratios with Pt allowed for high activity and selectivity to be maintained. Extents of methane and CO2 conversion are varied within a range of 79.5–97.5 and 64.2–85.2%, respectively, at 700–800 °C, while the H2/CO ratio in the resulting syngas ranged from 0.98 to 1.30, depending on the catalyst and feed composition. Stability tests conducted for up to 80 h on stream showed no loss of activity of the 10%Co-Fe-Pt/Al2O3 catalysts in BRM. We believe that high activity of the synthesized catalysts occurs due to synergy in the Co-Fe-Pt system.