DRDaniel González Rodríguez

Daniel González Rodríguez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Daniel González Rodríguez has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A systematic literature review of RAM+ analysis: methodologies, applications, and gaps

    by João Pedro Bachega Cruz, Daniel González Rodríguez, Danilo Taverna Martins Pereira Abreu, Adriana M. Schleder, Leorlen Yunier Rojas Mazaira, Ana Carolina Russo, Bruna Moura Bastos, Marcos Coelho Maturana, Rene Thiago Capelari Orlowski, Marcelo Ramos Martins

    Purpose: This review underscores the importance of reliability, availability, maintainability (RAM) + analysis in assessing system performance and safety parameters while identifying risk-based improvements. The insights, gaps, and tendencies identified serve as foundation for future improved research studies and applications in this topic. Design/methodology/approach: This study presents a systematic literature review (SLR) on RAM analysis methodologies and derivations (especially RAMI, RAMS, and RAMSS), their applications, and research gaps across several engineering domains. To address different methodological derivations, the term “RAM+” is proposed. The review follows a well-established SLR framework, covering planning, searching, data collection, analysis, synthesis, interpretation, reporting, and review updating activities. These activities resulted in the selection of 100 articles, based on predefined inclusion and exclusion criteria. Findings: The analysis reveals a wide range of techniques applied in RAM + studies, including functional analysis, failure mode and effects analysis (FMEA)/failure mode, effects, and criticality analysis (FMECA), reliability block diagrams (RBD), Markov models, fault tree analysis, Petri nets, Poisson processes, Bayesian models, and Monte Carlo methods. Among these, RBD was the most widely used tool for system, subsystem or component performance modeling technique, while functional analysis and FMEA/FMECA were the most common descriptive methods. A critical gap was identified in validation practices, with few studies incorporating validation procedures. Corrective maintenance was identified as the dominant maintenance strategy. Sensitivity analysis was frequently performed, with input parameter sensitivity being the most commonly applied approach. Most studies relied on third-party databases for input data. The findings also highlight the widespread adoption of RAM + analysis across multiple industries, with nuclear fusion emerging as the most prominent application domain. RAM + methodologies are often applied in hybrid approaches, demonstrating their adaptability to diverse engineering challenges. Research limitations/implications: A critical gap was identified in validation practices, with a few studies incorporating validation procedures. Corrective maintenance was identified as the dominant maintenance strategy. Sensitivity analysis was frequently performed, with input parameter sensitivity being the most applied approach. Practical implications: The findings also highlight the widespread adoption of RAM + analysis across multiple industries, with nuclear fusion emerging as the most prominent application domain. RAM + methodologies are often applied in hybrid approaches, demonstrating their adaptability to diverse engineering challenges. This review underscores the importance of RAM + analysis in assessing system performance and safety parameters while identifying risk-based improvements. The insights, gaps, and tendencies identified serve as foundation for future improved research studies and applications in this topic. Originality/value: This study presents a systematic literature review (SLR) on reliability, availability, maintainability (RAM) analysis methodologies and derivations (especially RAMI, RAMS, and RAMSS), their applications, and research gaps across several engineering domains.

  • Open Access

    Neutronic and thermal-hydraulic analysis for an integral pressurized water reactor with Thorium-Based Mixed-Oxide Fuels

    by Pedro Emanuel Moraes Santos, Mariana Cecilia Betancourt, Fabian Luis Mena de la Noval, Dany Sanchez-Dominguez, Carlos García, Carlos Alberto Brayner de Oliveira Lira, Leorlen Rojas Mazaira, Daniel González Rodríguez

    The growth of nuclear energy is linked to the public's perception of the environmental impact associated with nuclear power plants and their fuel cycles. Therefore, sustainability has become a fundamental requirement, regarded as being as important as nuclear safety, the rational use of natural resources, the minimization of radioactive waste and resistance to proliferation. The expected increase in the use of nuclear fuels for energy generation this century calls for the use of other actinides in addition to uranium. The development of small modular reactors (SMR) for immediate and short-term deployment is advancing worldwide. This work focuses on the analysis of a small modular integral pressurized water reactor (iPWR) with Thorium-Uranium-Plutonium and Thorium-Plutonium (ThUPu and ThPu MOX) fuel mixture configurations. The feasibility of using MOX fuel was studied, considering the core partially loaded with MOX fuel, to guarantee an extended cycle of 48 months. One third of the core (24 fuel assemblies) was loaded with MOX fuel, while the remainder was loaded with standard UO2 fuel. It is proposed to develop a computational model that allows the study and optimization of physical-neutron parameters and the calculation of thermal-hydraulic parameters of the core of an IPWR reactor, based on SERPENT and OPENFOAM, respectively, for the study of extended fuel cycles. Strategies to control reactivity in extended four-year fuel cycles were studied. A thermal-hydraulic study of the hottest subchannel for the different MOX mixtures was carried out. The axial and radial temperature distributions in the fuel and coolant were calculated.

  • Proposal for a PWR-type vSMR for hydrogen-electricity-water desalination polygeneration

    by Daniel González Rodríguez, Maritza Rodriguez Gual, Leorlen Yunier Rojas Mazaira, Antonio Celso Dantas Antonino, Nathalia Araújo, Marcos Maturana, Carlos Alberto Brayner de Oliveira Lira


  • Single heated channel analysis of the AP-Th 1000 concept

    by Caio Július César Miranda Rodrigues da Cunha, Daniel González Rodríguez, Giovanni Laranjo de Stefani, Fernando Roberto de Andrade Lima, Carlos Alberto Brayner de Oliveira Lira


  • Exergy study of hydrogen cogeneration and seawater desalination coupled to the HTR-PM nuclear reactor

    by Daniel González Rodríguez, Carlos Alberto Brayner de Oliveira Lira, Fernando Roberto de Andrade Lima, Carlos García Hernández


  • Open Access

    Wind Resource Assessment in Building Environment: Benchmarking of Numerical Approaches and Validation with Wind Tunnel Data

    by Costa Paula, Cataldo José, Mazaira Leorlen, González Daniel, Costa Alexandre, Simões Teresa

    In the framework of the wind energy network for distributed generation in urban environments for most South American countries, wind resource assessment studies have been carried out in activities to establish a suitable methodology to assess the wind potential in urban environments. Some methodologies are already published in research studies, and the wind tunnel is the most accurate solution to obtain insight into the wind resource when measurements are unavailable, which is the most frequent case. Nevertheless, besides its validity, one cannot disregard the high cost of producing a scaled urban model and access to a wind tunnel. In this sense, this paper compares results from a wind tunnel experiment and different numerical modeling approaches. Two commercial models (WindSim and Wasp Engineering) and one open-source CFD code (OpenFOAM) are used. The results from the modeling simulation concluded that CFD models could achieve lower deviations for the mean wind speed and turbulence intensity when compared with non-CFD models. With such results, CFD modeling is a promising tool for reliably evaluating wind potential in urban environments.


  • Exergetic evaluation of a conceptual design for hydrogen production and seawater desalination using an advanced nuclear reactor as energy source

    by Daniel González Rodríguez, Fernando Roberto De Andrade Lima, Carlos Alberto Brayner De Oliveira Lira, Carlos Rafael García Hernández

    In this work, a computational model to develop the conceptual design for hydrogen production and seawater desalination based on a modular nuclear reactor as an energy source is presented. The four-step copper-chlorine (Cu-Cl) process is used to produce hydrogen coupled to the gas turbine modular helium reactor (GT-MHR) nuclear system through a Brayton cycle for the electrical energy generation. A fraction of the thermal energy from the GT-MHR system is used to reach and maintain the temperature requirements in the Cu-Cl process. The rejected heat from the oxy-decomposition reaction is used to desalinate seawater through a multi-stage flash (MSF) process. It is employed a chemical process simulator in order to develop a computational model of the proposed system. The global energy and exergy efficiencies of the proposal are 32.47% and 52.20% respectively, producing 0.2190 kg/s of hydrogen and desalinating 4.9492 kg/s of seawater. It is made an estimate of the cost of hydrogen produced using HEEP®, resulting in 2.77 $/kgH


  • Hydrogen production methods efficiency coupled to an advanced high-temperature accelerator driven system

    by Daniel González Rodríguez, Carlos Alberto Brayner de Oliveira Lira, Carlos Rafael García Hernández, Fernando Roberto de Andrade Lima


  • Computational model of a sulfur-iodine thermochemical water splitting system coupled to a VHTR for nuclear hydrogen production

    by Daniel González Rodríguez, Carlos Alberto Brayner de Oliveira Lira, Lázaro Roger García Parra, Carlos Rafael García Hernández, Raciel de la Torre Valdés


  • Efficiency of a conceptual design of a high temperature electrolysis system coupled to a VHTR for nuclear hydrogen production

    by Daniel González Rodríguez, Carlos Alberto Brayner de Oliveira Lira, Lázaro García Parra, Carlos García Hernández, Raciel De la Torre Valdés

    High temperature electrolysis process coupled to a very high temperature reactor is one of the most promising methods for hydrogen production using a nuclear reactor as the primary energy source. A computational fluid dynamic model for the evaluation and optimisation of the electrolyser of a high temperature electrolysis hydrogen production process flowsheet was developed using ANSYS FLUENT®. Electrolyser's operational and design parameters will be optimised in order to obtain the maximum hydrogen production and the higher efficiency in the module. A complete flowsheet is proposed for the high temperature electrolysis process coupled to an accelerator driven system, considering a Brayton cycle for the energy production and a sweep gas system for the gas separation. An acceptable value of global efficiency for the initial operating condition is obtained. Several parametric studies are conducted using the flowsheet proposed to evaluate important operating parameters in the overall process efficiency.