Lei Tan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Lei Tan has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Lin Lu
State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology , Dalian 116024
3 shared publications - Tomoki Ikoma
Nihon University, Funabashi, Japan
3 shared publications Guo-Qiang Tang
Dalian University of Technology
2 shared publicationsLiang Cheng
Dalian University of Technology
2 shared publicationsBin Teng
1 shared publication- Changhong Hu
Research Institute for Applied Mechanics, Kyushu University
1 shared publication
Latest Publications
- 1 June 2024
- Published by Springer Nature in Journal of Hydrodynamics
- Vol. 36 (3) , 479-491
Numerical analysis of a projecting wall type oscillating water column (PW-OWC) wave energy converter in regular waves
- 1 June 2024
- Published by Springer Nature in Journal of Hydrodynamics
- Vol. 36 (3) , 479-491
Numerical analysis of a projecting wall type oscillating water column (PW-OWC) wave energy converter in regular waves
- Open Access
- 1 August 2023
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1288 (1) , 012033
Numerical simulations of towing a jacket foundation with triple buckets
Offshore wind energy is developing fast as a promising renewable energy resource that can be helpful in achieving the global net-zero emissions goal. In recent years, offshore wind turbine projects have gradually moved towards far-offshore sea areas, where massive jacket foundations with suction buckets are suitable options. To reduce transportation costs, the wet-towing method is usually favourable since the required buoyancy of the foundation can be provided by the air cushions in the suction buckets. This engineering background brings us a research topic that involves towing and air cushions in waves. This study considers the towing problem of a jacket foundation with triple suction buckets. First, numerical analysis in the frequency domain is conducted using WAMIT®. In particular, the NEWMODES subroutine is extended to consider three separate motion modes in the buckets. Numerical predictions of the natural period show satisfactory agreement with the available experimental data in the literature. Moreover, a time-domain numerical model is developed to simulate towing of the jacket foundation in regular waves based on the potential flow theory. The time-domain model numerically solves the towing force in regular waves, the body motions and the air pressures in the buckets. The simulation results generally agree well with the published experimental data. Besides, the present simulation results suggest that the transit towing force and the forward speed of towed triple-bucket jacket may be considerable in the initial towing stage.
- 1 August 2023
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1288 (1) , 012033
Open AccessNumerical simulations of towing a jacket foundation with triple buckets
Offshore wind energy is developing fast as a promising renewable energy resource that can be helpful in achieving the global net-zero emissions goal. In recent years, offshore wind turbine projects have gradually moved towards far-offshore sea areas, where massive jacket foundations with suction buckets are suitable options. To reduce transportation costs, the wet-towing method is usually favourable since the required buoyancy of the foundation can be provided by the air cushions in the suction buckets. This engineering background brings us a research topic that involves towing and air cushions in waves. This study considers the towing problem of a jacket foundation with triple suction buckets. First, numerical analysis in the frequency domain is conducted using WAMIT®. In particular, the NEWMODES subroutine is extended to consider three separate motion modes in the buckets. Numerical predictions of the natural period show satisfactory agreement with the available experimental data in the literature. Moreover, a time-domain numerical model is developed to simulate towing of the jacket foundation in regular waves based on the potential flow theory. The time-domain model numerically solves the towing force in regular waves, the body motions and the air pressures in the buckets. The simulation results generally agree well with the published experimental data. Besides, the present simulation results suggest that the transit towing force and the forward speed of towed triple-bucket jacket may be considerable in the initial towing stage.
- 24 August 2022
- Published by Elsevier in Ocean Engineering
- Vol. 260
Hydrodynamic analysis of resonant waves within the gap between a vessel and a vertical quay wall
- 24 August 2022
- Published by Elsevier in Ocean Engineering
- Vol. 260
Hydrodynamic analysis of resonant waves within the gap between a vessel and a vertical quay wall
- Open Access
- 27 June 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (7) , 709
Mean Wave Drift Forces on a Barge-Type Floating Wind Turbine Platform with Moonpools
Barge-type platforms with moonpools are a promising type of foundation for floating offshore wind turbines due to their good seakeeping performance. In this paper, the mean wave drift force on a barge-type vertical-axis floating wind turbine with multiple moonpools was investigated through physical model testing and numerical calculations using WAMIT. The focus was on the characteristics of mean drift load and its optimization potential. The present numerical results indicated that the application of moonpools was useful in reducing horizontal mean drift force at specific frequencies, and the reason was ascribed to the significant radiation effect of the resonant water oscillations in moonpools. The observed reduction effect on mean drift force was shown to be dependent on the viscous damping of moonpool resonance. The experimental results showed that the maximum response of the mean sway drift force was reduced by the gyroscopic effect of rotations of the vertical-axis wind turbine, and this reduction effect became stronger as the rotating speed of the wind turbine increased, but was weakened as wave amplitude increased. The comparisons between experimental data and potential flow predictions indicated that viscous effects should be taken into account to reasonably estimate the mean wave drift forces on barge-type floating wind turbines.
- 27 June 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (7) , 709
Open AccessMean Wave Drift Forces on a Barge-Type Floating Wind Turbine Platform with Moonpools
Barge-type platforms with moonpools are a promising type of foundation for floating offshore wind turbines due to their good seakeeping performance. In this paper, the mean wave drift force on a barge-type vertical-axis floating wind turbine with multiple moonpools was investigated through physical model testing and numerical calculations using WAMIT. The focus was on the characteristics of mean drift load and its optimization potential. The present numerical results indicated that the application of moonpools was useful in reducing horizontal mean drift force at specific frequencies, and the reason was ascribed to the significant radiation effect of the resonant water oscillations in moonpools. The observed reduction effect on mean drift force was shown to be dependent on the viscous damping of moonpool resonance. The experimental results showed that the maximum response of the mean sway drift force was reduced by the gyroscopic effect of rotations of the vertical-axis wind turbine, and this reduction effect became stronger as the rotating speed of the wind turbine increased, but was weakened as wave amplitude increased. The comparisons between experimental data and potential flow predictions indicated that viscous effects should be taken into account to reasonably estimate the mean wave drift forces on barge-type floating wind turbines.
- 21 June 2021
- Published by ASME International
Mean Wave Drift Force on a Barge-Type Floating Wind Turbine With Moonpools
The barge-type foundation with moonpool(s) is a promising type of platform for floating offshore wind turbines, since the moonpool(s) could improve the hydrodynamic performance at particular frequencies and reduce the costs of construction. In this paper, the horizontal mean drift force and yaw drift moment of a barge-type platform with four moonpools are numerically and experimentally investigated. Physical model tests are carried out in a wave tank, where a 2MW vertical-axis wind turbine is modelled in the 1:100 scale. By varying the rotating speed of the turbine and the mass of the blades, the gyroscopic effects due to turbine rotations on the mean drift forces are experimentally examined. The wave diffraction and radiation code WAMIT is used to carry out numerical analysis of wave drift force and moment. The experimental results indicate that the influence of the rotations of a vertical-axis wind turbine on the sway drift force is generally not very significant. The predictions by WAMIT are in reasonable agreement with the measured data. Numerical results demonstrate that the horizontal mean drift force and yaw drift moment at certain frequencies could be reduced by moonpool(s).
- 21 June 2021
- Published by ASME International
Mean Wave Drift Force on a Barge-Type Floating Wind Turbine With Moonpools
The barge-type foundation with moonpool(s) is a promising type of platform for floating offshore wind turbines, since the moonpool(s) could improve the hydrodynamic performance at particular frequencies and reduce the costs of construction. In this paper, the horizontal mean drift force and yaw drift moment of a barge-type platform with four moonpools are numerically and experimentally investigated. Physical model tests are carried out in a wave tank, where a 2MW vertical-axis wind turbine is modelled in the 1:100 scale. By varying the rotating speed of the turbine and the mass of the blades, the gyroscopic effects due to turbine rotations on the mean drift forces are experimentally examined. The wave diffraction and radiation code WAMIT is used to carry out numerical analysis of wave drift force and moment. The experimental results indicate that the influence of the rotations of a vertical-axis wind turbine on the sway drift force is generally not very significant. The predictions by WAMIT are in reasonable agreement with the measured data. Numerical results demonstrate that the horizontal mean drift force and yaw drift moment at certain frequencies could be reduced by moonpool(s).
- 1 June 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (6) , 062117
Damping of piston mode resonance between two fixed boxes
In this paper, the damping of wave-induced resonant oscillations of water column in the gap between two fixed boxes is investigated through physical model testing. A pair of rectangular fins with different geometries is attached to the sidewalls of the gap to suppress the resonant response. This study is an extension to Tan et al. [“A viscous damping model for piston mode resonance,” J. Fluid Mech. 871, 510–533 (2019)], where the damping of wave resonance in a plain gap without fins was investigated. We found that (1) the resonant wave height in the gap decreased substantially with the increasing fin thickness, but was not very sensitive to the variation of the fin height. This observation suggests that the fin thickness has a more significant influence on the damping of oscillations than the fin height; (2) the resonant frequency decreased as the thickness of the fins was enlarged, which is primarily attributable to the decrease in the natural frequency (due to increasing added mass) and partly ascribed to the increase in viscous damping. The viscous dissipation was found to be approximately 3–10 times larger than the radiation energy and explains the well-known over-estimations of inviscid potential solution in resonant amplitude. A modified potential flow model with a damping mechanism was employed to predict the wave response in the gap, wave reflections, and transmissions. Reasonable agreements were obtained between the experimental results and the modified potential flow solutions with respect to amplitude, whereas a difference of 6%–14% in resonant frequency was observed. This difference is ascribed to the effects of flow separation on the added mass of fins, which cannot be fully captured by modified potential flow models. In addition to the present geometries, the local loss coefficients for other appendage configurations were also calibrated based on the available experimental and computational fluid dynamics data in the literature.
- 1 June 2021
- Published by AIP Publishing in Physics of Fluids
- Vol. 33 (6) , 062117
Damping of piston mode resonance between two fixed boxes
In this paper, the damping of wave-induced resonant oscillations of water column in the gap between two fixed boxes is investigated through physical model testing. A pair of rectangular fins with different geometries is attached to the sidewalls of the gap to suppress the resonant response. This study is an extension to Tan et al. [“A viscous damping model for piston mode resonance,” J. Fluid Mech. 871, 510–533 (2019)], where the damping of wave resonance in a plain gap without fins was investigated. We found that (1) the resonant wave height in the gap decreased substantially with the increasing fin thickness, but was not very sensitive to the variation of the fin height. This observation suggests that the fin thickness has a more significant influence on the damping of oscillations than the fin height; (2) the resonant frequency decreased as the thickness of the fins was enlarged, which is primarily attributable to the decrease in the natural frequency (due to increasing added mass) and partly ascribed to the increase in viscous damping. The viscous dissipation was found to be approximately 3–10 times larger than the radiation energy and explains the well-known over-estimations of inviscid potential solution in resonant amplitude. A modified potential flow model with a damping mechanism was employed to predict the wave response in the gap, wave reflections, and transmissions. Reasonable agreements were obtained between the experimental results and the modified potential flow solutions with respect to amplitude, whereas a difference of 6%–14% in resonant frequency was observed. This difference is ascribed to the effects of flow separation on the added mass of fins, which cannot be fully captured by modified potential flow models. In addition to the present geometries, the local loss coefficients for other appendage configurations were also calibrated based on the available experimental and computational fluid dynamics data in the literature.
- 1 September 2020
- Published by AIP Publishing in Physics of Fluids
- Vol. 32 (9) , 092101
Two-dimensional numerical study of gap resonance coupling with motions of floating body moored close to a bottom-mounted wall
The piston mode fluid resonance in the narrow gap between a moored floating body and a bottom-mounted vertical wall is numerically investigated based on a two-dimensional potential flow model and viscous numerical simulations. This study focuses on understanding the effect of mooring stiffness on the coupling dynamics of the gap resonance and the sway or heave motion of the floating body in regular waves. Numerical studies show that the resonant wave amplitude in the gap is reduced by the sway and heave motions. The reduction is highly dependent on the mooring stiffness. Two resonant frequencies are confirmed, and both increase with the mooring stiffness. Different modes of motions are identified in terms of the phase difference between the oscillatory motions of the gap flow and the floating body. Higher harmonic components of responses are found for the specific mooring stiffness. The performance of potential flow models in predicting resonant responses is revisited based on the understanding that the overall damping effect consists of two parts: (1) radiation damping and (2) viscous dissipation. It is confirmed that a potential model is also able to produce reasonable predictions as radiation damping plays a dominant role, for example, at the second resonant frequencies of coupling the gap resonance with the sway motion. Otherwise, as viscous dissipation dominates radiation damping, noticeable over-predictions by a potential model occur as recognized before, for example, the present results at the second peak response of gap resonance with the heave motion. The relative viscous dissipation is quantified with the reflection coefficient of viscous numerical results, while the radiation damping is quantified based on a specially designed radiation potential model with inputs of viscous numerical solutions.
- 1 September 2020
- Published by AIP Publishing in Physics of Fluids
- Vol. 32 (9) , 092101
Two-dimensional numerical study of gap resonance coupling with motions of floating body moored close to a bottom-mounted wall
The piston mode fluid resonance in the narrow gap between a moored floating body and a bottom-mounted vertical wall is numerically investigated based on a two-dimensional potential flow model and viscous numerical simulations. This study focuses on understanding the effect of mooring stiffness on the coupling dynamics of the gap resonance and the sway or heave motion of the floating body in regular waves. Numerical studies show that the resonant wave amplitude in the gap is reduced by the sway and heave motions. The reduction is highly dependent on the mooring stiffness. Two resonant frequencies are confirmed, and both increase with the mooring stiffness. Different modes of motions are identified in terms of the phase difference between the oscillatory motions of the gap flow and the floating body. Higher harmonic components of responses are found for the specific mooring stiffness. The performance of potential flow models in predicting resonant responses is revisited based on the understanding that the overall damping effect consists of two parts: (1) radiation damping and (2) viscous dissipation. It is confirmed that a potential model is also able to produce reasonable predictions as radiation damping plays a dominant role, for example, at the second resonant frequencies of coupling the gap resonance with the sway motion. Otherwise, as viscous dissipation dominates radiation damping, noticeable over-predictions by a potential model occur as recognized before, for example, the present results at the second peak response of gap resonance with the heave motion. The relative viscous dissipation is quantified with the reflection coefficient of viscous numerical results, while the radiation damping is quantified based on a specially designed radiation potential model with inputs of viscous numerical solutions.
- Open Access
- 1 April 2020
- Published by Association for Computing Machinery (ACM)
- p. 1-4
A Study on College Students' Mental Health Education and Early Warning Mechanism Based on Big Data
Since the mental health education of college students has attracted more and more attention, it is of great importance and necessity to strengthen the construction of psychological warning mechanism for college students. With the advent of the new media era, it is time to apply big data technology to mental health education in colleges and universities and analyze the mental health data of college students. It can be said that the construction of an early warning mechanism based on big data and the realization of crisis intervention will help promote the innovative development of mental health education for college students.
- 1 April 2020
- Published by Association for Computing Machinery (ACM)
- p. 1-4
Open AccessA Study on College Students' Mental Health Education and Early Warning Mechanism Based on Big Data
Since the mental health education of college students has attracted more and more attention, it is of great importance and necessity to strengthen the construction of psychological warning mechanism for college students. With the advent of the new media era, it is time to apply big data technology to mental health education in colleges and universities and analyze the mental health data of college students. It can be said that the construction of an early warning mechanism based on big data and the realization of crisis intervention will help promote the innovative development of mental health education for college students.
- 9 July 2019
- Published by Springer Nature in Journal of Hydrodynamics
- Vol. 32 (1) , 54-69
A dynamic solution for predicting resonant frequency of piston mode fluid oscillation in moonpools/narrow gaps
- 9 July 2019
- Published by Springer Nature in Journal of Hydrodynamics
- Vol. 32 (1) , 54-69
A dynamic solution for predicting resonant frequency of piston mode fluid oscillation in moonpools/narrow gaps
- 24 May 2019
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 871, 510-533
A viscous damping model for piston mode resonance
A viscous damping model is proposed based on a simplified equation of fluid motion in a moonpool or the narrow gap formed by two fixed boxes. The model takes into account the damping induced by both flow separation and wall friction through two damping coefficients, namely, the local and friction loss coefficients. The local loss coefficient is determined through specifically designed physical model tests in this work, and the friction loss coefficient is estimated through an empirical formula found in the literature. The viscous damping model is implemented in the dynamic free-surface boundary condition in the gap of a modified potential flow model. The modified potential flow model is then applied to simulate the wave-induced fluid responses in a narrow gap formed by two fixed boxes and in a moonpool for which experimental data are available. The modified potential flow model with the proposed viscous damping model works well in capturing both the resonant amplitude and frequency under a wide range of damping conditions.
- 24 May 2019
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 871, 510-533
A viscous damping model for piston mode resonance
A viscous damping model is proposed based on a simplified equation of fluid motion in a moonpool or the narrow gap formed by two fixed boxes. The model takes into account the damping induced by both flow separation and wall friction through two damping coefficients, namely, the local and friction loss coefficients. The local loss coefficient is determined through specifically designed physical model tests in this work, and the friction loss coefficient is estimated through an empirical formula found in the literature. The viscous damping model is implemented in the dynamic free-surface boundary condition in the gap of a modified potential flow model. The modified potential flow model is then applied to simulate the wave-induced fluid responses in a narrow gap formed by two fixed boxes and in a moonpool for which experimental data are available. The modified potential flow model with the proposed viscous damping model works well in capturing both the resonant amplitude and frequency under a wide range of damping conditions.