TITomoki Ikoma

Tomoki Ikoma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Tomoki Ikoma has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mean Wave Drift Force on a Barge-Type Floating Wind Turbine With Moonpools

    by Lei Tan, Tomoki Ikoma, Yasuhiro Aida, Koichi Masuda

    The barge-type foundation with moonpool(s) is a promising type of platform for floating offshore wind turbines, since the moonpool(s) could improve the hydrodynamic performance at particular frequencies and reduce the costs of construction. In this paper, the horizontal mean drift force and yaw drift moment of a barge-type platform with four moonpools are numerically and experimentally investigated. Physical model tests are carried out in a wave tank, where a 2MW vertical-axis wind turbine is modelled in the 1:100 scale. By varying the rotating speed of the turbine and the mass of the blades, the gyroscopic effects due to turbine rotations on the mean drift forces are experimentally examined. The wave diffraction and radiation code WAMIT is used to carry out numerical analysis of wave drift force and moment. The experimental results indicate that the influence of the rotations of a vertical-axis wind turbine on the sway drift force is generally not very significant. The predictions by WAMIT are in reasonable agreement with the measured data. Numerical results demonstrate that the horizontal mean drift force and yaw drift moment at certain frequencies could be reduced by moonpool(s).

  • Damping of piston mode resonance between two fixed boxes

    by Lei Tan, Liang Cheng, Tomoki Ikoma

    In this paper, the damping of wave-induced resonant oscillations of water column in the gap between two fixed boxes is investigated through physical model testing. A pair of rectangular fins with different geometries is attached to the sidewalls of the gap to suppress the resonant response. This study is an extension to Tan et al. [“A viscous damping model for piston mode resonance,” J. Fluid Mech. 871, 510–533 (2019)], where the damping of wave resonance in a plain gap without fins was investigated. We found that (1) the resonant wave height in the gap decreased substantially with the increasing fin thickness, but was not very sensitive to the variation of the fin height. This observation suggests that the fin thickness has a more significant influence on the damping of oscillations than the fin height; (2) the resonant frequency decreased as the thickness of the fins was enlarged, which is primarily attributable to the decrease in the natural frequency (due to increasing added mass) and partly ascribed to the increase in viscous damping. The viscous dissipation was found to be approximately 3–10 times larger than the radiation energy and explains the well-known over-estimations of inviscid potential solution in resonant amplitude. A modified potential flow model with a damping mechanism was employed to predict the wave response in the gap, wave reflections, and transmissions. Reasonable agreements were obtained between the experimental results and the modified potential flow solutions with respect to amplitude, whereas a difference of 6%–14% in resonant frequency was observed. This difference is ascribed to the effects of flow separation on the added mass of fins, which cannot be fully captured by modified potential flow models. In addition to the present geometries, the local loss coefficients for other appendage configurations were also calibrated based on the available experimental and computational fluid dynamics data in the literature.


  • Two-dimensional numerical study of gap resonance coupling with motions of floating body moored close to a bottom-mounted wall

    by Lin Lu, Lei Tan, Zhongbing Zhou, Ming Zhao, Tomoki Ikoma

    The piston mode fluid resonance in the narrow gap between a moored floating body and a bottom-mounted vertical wall is numerically investigated based on a two-dimensional potential flow model and viscous numerical simulations. This study focuses on understanding the effect of mooring stiffness on the coupling dynamics of the gap resonance and the sway or heave motion of the floating body in regular waves. Numerical studies show that the resonant wave amplitude in the gap is reduced by the sway and heave motions. The reduction is highly dependent on the mooring stiffness. Two resonant frequencies are confirmed, and both increase with the mooring stiffness. Different modes of motions are identified in terms of the phase difference between the oscillatory motions of the gap flow and the floating body. Higher harmonic components of responses are found for the specific mooring stiffness. The performance of potential flow models in predicting resonant responses is revisited based on the understanding that the overall damping effect consists of two parts: (1) radiation damping and (2) viscous dissipation. It is confirmed that a potential model is also able to produce reasonable predictions as radiation damping plays a dominant role, for example, at the second resonant frequencies of coupling the gap resonance with the sway motion. Otherwise, as viscous dissipation dominates radiation damping, noticeable over-predictions by a potential model occur as recognized before, for example, the present results at the second peak response of gap resonance with the heave motion. The relative viscous dissipation is quantified with the reflection coefficient of viscous numerical results, while the radiation damping is quantified based on a specially designed radiation potential model with inputs of viscous numerical solutions.


  • Fundamental Study on Development on Numerical Method for Evaluation of Wave Power Generating Systems With Pendulum Type by the Particle Method

    by Kazuki Murata, Chang-Kyu Rheem, Tomoki Ikoma

    In this paper, we report the proposal and development of the numerical model. The model applies to two and three dimensional problems. We introduce the model to the MPS method which is a kind of particle method, and discuss applicability of the model on numerical test of aerial physical pendulum in free torque load; the present model was compared with the theoretical solution by the 4th order Runge-Kutta method. As a result, we confirmed the good reproducibility of the model. And we can say that the model is suitable for analyzing the problem of physical pendulum. Secondary, we examine the practicability of this model in the regular wave from the calculation results. The tests are examined by a two-dimensional problem in order to reduce calculation cost. In addition, we conducted fluid-structure interaction analysis using the present model and confirmed the applicability of its model to fluid field analysis.


  • A Basic Study on Influence of Airchamber Volume on OWC Models to Power Conversion Performance

    by Tomoki Ikoma, Yoshiyuki Kihara, Shota Hirai, Yasuhiro Aida, Koichi Masuda, Hiroaki Eto

    Oscillating water column (OWC) types of wave energy converters have still several issues to be studied because system including wave-air-turbine interaction is complex. Besides, scale effects between small scale models and full scale models have not been definite. Although the effect in initial design of OWC devices might been able to be ignored, it is important to understand its characteristics exactly. The present study carried out forced oscillation tests in a water tank corresponding to the radiation problem. Three models whose scale are 1/1, 1/2 and 1/4 were used. In the forced oscillation test, we measured mean water elevation in an airchamber to predict the air flow rate and air pressure inside of the airchamber. From the mean water elevation and the air pressure, the primary power conversion was calculated. As a result, the pressure and the elevation were affected by not only the scale reduction but also the difference of airchamber volume. Variation of the volume of an airchamber affected on hydrodynamic performance sensitively.


  • Expected Values of Wave Power Absorption Around the Japanese Islands Using OWC Types With Projecting Walls

    by Tomoki Ikoma, Hiroyuki Osawa, Koichi Masuda, Hiisaaki Maeda

    This paper describes performance improvement of wave power absorption by using a new concept. Basic system proposed is an oscillating water column (OWC) type. An artificial harbor surrounded by projecting walls is installed. The type is called as PW-OWC in this paper. Standing waves occur in the artificial harbor, the absorbing device consequently has a resonance frequency differing from that of OWC. From the effect, the system is able to absorb wave power in very wide range of the wave frequency. From the experimental results, PW-OWC types are very good performance of wave power absorption comparing with conventional OWC types. In addition, the performance of the PW-OWC type is insensibility to the nozzle ratio of an orifice. The performance can be easily improved by installing the harbor part even if the performance of a base OWC device is not good. Finally, we investigate the expected values of acquirable wave power in not only a year but also every season. The expected values of PW-OWC types are greater than that of conventional OWC ones in seas around the Japanese islands.