LFLiesl Folks

Liesl Folks

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Liesl Folks has a total of 149 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effects of radio-frequency current on critical fields for magnetization reversal in spin-torque devices

    by W. Chen, S. H. Florez, J. A. Katine, M. J. Carey, L. Folks, B. D. Terris

    The application of radio-frequency (rf) currents in spin-torque devices allows control of magnetization reversal through frequency of the rf current. Using this effect, the impact of the rf currents on switching fields of nanostructured metallic spin valves has been investigated. The rf current injection was observed to change the critical field for free-layer magnetization reversal when the intrinsic spin-transfer-induced dynamics are frequency locked with the injected rf. Experimental results are presented by mapping the switching contour plot, and are compared with simulations in the context of macrospin models of spin transfer in metallic-spin-valve structures. Differences between this effect and the effect of rf currents on direct-current-induced magnetization reversal are highlighted by considering the role of a magnetization dispersion in the two sweep methods, which allows insights for device applications assisted by rf currents.


  • Probing activation energy barrier distribution for reversal of strongly exchange-coupled magnetic multilayer thin films

    by O. Ozatay, T. Hauet, S. H. Florez, J. A. Katine, A. Moser, J.-U. Thiele, L. Folks, B. D. Terris

    We demonstrate a measurement technique with zero-applied magnetic field to deduce and spatially map the activation energy barrier distribution of strongly exchange-coupled magnetic-multilayer thin films, which is otherwise inaccessible with conventional methods in the presence of an applied magnetic field. Our technique involves the analysis of magnetic force microscopy images of magnetic microwires, whose magnetizations have been subject to thermal decay due to Joule heating from applied nanosecond scale current pulses. Fitting the results of such measurements on CoNi/Pd magnetic-multilayer microwires to a modified Arrhenius–Neel formalism yields an energy barrier distribution with 8% sigma, in good agreement with complementary fits of the switching-field-distribution measurements on patterned CoNi/Pd magnetic-multilayer islands.


  • Near-surface nanoscale InAs Hall cross sensitivity to localized magnetic and electric fields

    by L Folks, A S Troup, T D Boone, J A Katine, M Nishioka, M Grobis, G J Sullivan, A Ikhlassi, M Field, B A Gurney

    We have measured the room temperature response of nanoscale semiconductor Hall crosses to local applied magnetic fields under various local electric gate conditions using scanning probe microscopy. Near-surface quantum wells of AlSb/InAs/AlSb, located just 5 nm from the heterostructure surface, allow very high sensitivity to localized electric and magnetic fields applied near the device surfaces. The Hall crosses have critical dimensions of 400 and 100 nm, while the mean free path of the carriers is about 160 nm; hence the devices nominally span the transition from diffusive to quasi-ballistic transport. With certain small gate voltages (V(g)) the devices of both sizes are strongly responsive to the local magnetic field at the center of the cross, and the results are well described using finite element modeling. At high V(g), the response to local magnetic fields is greatly distorted by strong electric fields applied near the cross corners. However we observe no change in behavior with the size of the device.


  • A GHz spintronic-based RF oscillator

    by P. Vincent, M-C. Cyrille, B. Viala, B. Delaet, J.P. Michel, P. Villard, J. Prouvee, D. Houssamedine, U. Ebels, J. A. Katine, et al.

    In this paper, a first investigation of the use of spintronic based oscillators has been made with very promising results showing a large frequency tuning range (85%), combined with extremely small die size compare to the standard LC VCO (gain factor of 50). The measured output power is -45 dBm, which is two decades higher than published results from spin valves exhibiting similar narrow RF emissions with a dynamic of 120 dBc. Further improvements in the performance of the STO are expected both at the device level (by magnetic multi-layer engineering) and at the system level, through new oscillator and transceiver architectures.


  • Effects of radio-frequency current on spin-transfer-torque-induced dynamics

    by S. H. Florez, J. A. Katine, M. Carey, L. Folks, O. Ozatay, B. D. Terris

    The impact of radio-frequency (rf) currents on the direct current (dc)-driven switching dynamics in current-perpendicular-to-plane nanoscale spin valves is demonstrated. The rf currents can dramatically alter the dc-driven free layer magnetization reversal dynamics as well as the dc switching level. The effects occur when the frequency of the rf current is tuned to a frequency range around the dc-driven magnetization precession frequencies. For these frequencies, interactions between the dc-driven precession and the injected rf induce frequency locking and frequency pulling effects that lead to a measurable dependence of the critical switching current on the frequency of the injected rf. Based on macrospin simulations, including dc as well as rf spin torque currents, we explain the origin of the observed effects.


  • Three-dimensional atom probe investigation of boron distribution in CoFeB∕MgO∕CoFeB magnetic tunnel junctions

    by S. Pinitsoontorn, A. Cerezo, A. K. Petford-Long, D. Mauri, L. Folks, M. J. Carey

    Significant lateral compositional variations have been revealed in a three-dimensional atom probe (3DAP) study of the MgO barriers of magnetic tunnel junctions. High resolution electron microscopy of the CoFeB∕MgO∕CoFeB∕Ru∕CoFe∕PtMn multilayer indicates that the MgO barrier is smooth, uniform, and with good crystallinity. Nevertheless, the 3DAP data show lateral variations in the MgO composition over length scales on the order of tens of nanometers. Boron is not uniformly distributed within the CoFeB layers, but has tended to segregate to the interfaces. Annealing has no significant effect on the distribution of B, indicating that the segregation occurring during growth is relatively stable.


  • Spin transfer induced coherent microwave emission with large power from nanoscale MgO tunnel junctions

    by D. Houssameddine, S. H. Florez, J. A. Katine, J.-P. Michel, U. Ebels, D. Mauri, O. Ozatay, B. Delaet, B. Viala, L. Folks, et al.

    In low resistance-area product MgO magnetic tunnel junction nanopillars, we observe high integrated power (up to 43nW ), narrow linewidth (down to 10MHz ), spin transfer induced microwave emission at frequencies up to 14GHz due to precession of the free layer magnetization at room temperature. Although all devices were fabricated on the same wafer, they present bimodal transport and precessional characteristics. The devices in which the narrowest linewidths were observed exhibited low resistance and tunneling magnetoresistance (30%), while maintaining large integrated power.


  • Exchange-coupled suppression of vortex formation in permalloy nanodot chain arrays

    by Sarah C. Hernandez, Jian Dou, Chengtao Yu, Michael J. Pechan, Liesl Folks, Jordan A. Katine, Matthew J. Carey

    The effect of interdot exchange coupling on the magnetization reversal processes in nanodots has been investigated in a study on permalloy dot arrays with dot diameters of 300 nm and thicknesses of 40 nm. The dots, fabricated using e-beam lithography and ion beam deposition, are exchange coupled via 50 nm long permalloy bridges of widths ranging from 0 to 60 nm. Chains of five collinear coupled dots form the unit cell of the array structure. Magneto-optical Kerr effect hysteresis loops are reported with comparison to simulations. With field applied along the coupling direction, vortex nucleation occurs sequentially from the outer to the inner dots of the chain. Compared with uncoupled dots, nucleation is suppressed by the interdot exchange coupling resulting in highly correlated magnetization patterns. Buildup of exchange energy in the inner dots ultimately drives the bridge magnetization to switch, followed by abrupt, simultaneous vortex nucleation in these dots. Along the perpendicular-to-the-coupling direction, the exchange interaction has little effect and magnetic reversal is almost identical to arrays of isolated dots of the same geometry.


  • Modification of critical spin torque current induced by rf excitation

    by S. H. Florez, J. A. Katine, M. Carey, L. Folks, B. D. Terris

    We characterize the spin transfer torque induced reversal for current-perpendicular-to-plane spin valves with in-plane magnetic anisotropy at low temperature when driven by both direct and rf currents. We find that for rf currents with frequencies in the range of the dc driven resonances, the rf current strongly influences the preswitching precessional modes leading to a clear dependence of the critical dc switching current on the external rf frequency excitation.


  • High resolution structural characterization of giant magnetoresistance structures containing a nano-oxide layer

    by C. Y. You, A. Cerezo, P. H. Clifton, L. Folks, M. J. Carey, A. K. Petford-Long

    The microstructure and chemistry of a current-perpendicular-to-plane giant magnetoresistance structure containing a nano-oxide layer (NOL) have been studied using a combination of high resolution transmission electron microscopy and three-dimensional atom probe analysis. It was found that the morphology of the NOL changes from a planar layer to discrete particles on annealing, indicating the dominance of surface energy on the morphology evolution. Direct evidence was obtained for significant Mn diffusion from the IrMn antiferromagnetic layer and partitioning to the oxide region during annealing.