Yihui Lou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yihui Lou has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
Fei Wang
3 shared publicationsGuifen Fan
2 shared publications- Guifen Fan
School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan 430074, China
2 shared publications - Mengmeng Hao
School of Optical and Electronic Information Huazhong University of Science and Technology Wuhan China
2 shared publications - Wen Lei
School of Optical and Electronic Information, Key Lab of Functional Materials for Electronic Information (B), MOE, Huazhong University of Science and Technology, Wuhan, China
2 shared publications - Wen-Zhong Lu
Huazhong University of Science and Technology
2 shared publications
Latest Publications
- 22 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (2) , 234-238
Design of Ku-Band Flat Luneburg Lens Using Ceramic 3-D Printing
A flat Luneburg lens antenna for Ku-band (12—18 GHz) applications is proposed and designed using ceramic 3-D printing. Metamaterial structures and transformation optics technology are used to realize the gradient dielectric constant, compress the height, and reduce the weight of the Luneburg lens. The proposed 3-D printed Luneburg lens, combined with a 10-dB standard gain horn antenna, obtained an antenna gain up to 19.1 dBi over the operating frequency and the thickness reduction of 78%. In addition, the ability of the flat Luneburg lens to perform passive beam scanning with limited power loss is achieved. This exploration of ceramic 3-D printing can serve as reference for the development of ceramic components with complex structures.
- 22 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (2) , 234-238
Design of Ku-Band Flat Luneburg Lens Using Ceramic 3-D Printing
A flat Luneburg lens antenna for Ku-band (12—18 GHz) applications is proposed and designed using ceramic 3-D printing. Metamaterial structures and transformation optics technology are used to realize the gradient dielectric constant, compress the height, and reduce the weight of the Luneburg lens. The proposed 3-D printed Luneburg lens, combined with a 10-dB standard gain horn antenna, obtained an antenna gain up to 19.1 dBi over the operating frequency and the thickness reduction of 78%. In addition, the ability of the flat Luneburg lens to perform passive beam scanning with limited power loss is achieved. This exploration of ceramic 3-D printing can serve as reference for the development of ceramic components with complex structures.
- 1 July 2020
- Published by Elsevier in Ceramics International
- Vol. 46 (10) , 16979-16986
Fabrication of high-performance MgTiO3–CaTiO3 microwave ceramics through a stereolithography-based 3D printing
- 1 July 2020
- Published by Elsevier in Ceramics International
- Vol. 46 (10) , 16979-16986
Fabrication of high-performance MgTiO3–CaTiO3 microwave ceramics through a stereolithography-based 3D printing
- 1 July 2020
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 40 (8) , 3035-3041
Synthesis, lattice energy and microwave dielectric properties of BaCu2-xCoxSi2O7 ceramics
- 1 July 2020
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 40 (8) , 3035-3041
Synthesis, lattice energy and microwave dielectric properties of BaCu2-xCoxSi2O7 ceramics
- 11 June 2020
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 103 (11) , 6226-6236
A quasi‐linear piezoelectric strain behavior of [001] textured rhombohedral PMN–24%PT ceramic
Highly textured (1–x)Pb(Mg1/3Nb2/3)O3‐xPbTiO3 (PMN–xPT) piezoelectric ceramics were fabricated. It was found that [001] textured rhombohedral PMN–24%PT ceramic exhibited a quasi‐linear piezoelectric strain behavior with low hysteresis. The strain hysteresis of PMN–24%PT ceramic was reduced from 22.5% to 9% at 30 kV/cm using the texture method. Accurate displacement was generated by DC field using textured PMN–24%PT ceramic. The domain configurations in textured PMN–xPT ceramics were figured out using the chemical etching method. It was demonstrated that the quasi‐linear and low‐hysteretic strain behavior was due to a fixed domain configuration. We predict that the textured PMN–24%PT ceramic will facilitate the development of low‐voltage driving piezoelectric actuators with high precision.
- 11 June 2020
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 103 (11) , 6226-6236
A quasi‐linear piezoelectric strain behavior of [001] textured rhombohedral PMN–24%PT ceramic
Highly textured (1–x)Pb(Mg1/3Nb2/3)O3‐xPbTiO3 (PMN–xPT) piezoelectric ceramics were fabricated. It was found that [001] textured rhombohedral PMN–24%PT ceramic exhibited a quasi‐linear piezoelectric strain behavior with low hysteresis. The strain hysteresis of PMN–24%PT ceramic was reduced from 22.5% to 9% at 30 kV/cm using the texture method. Accurate displacement was generated by DC field using textured PMN–24%PT ceramic. The domain configurations in textured PMN–xPT ceramics were figured out using the chemical etching method. It was demonstrated that the quasi‐linear and low‐hysteretic strain behavior was due to a fixed domain configuration. We predict that the textured PMN–24%PT ceramic will facilitate the development of low‐voltage driving piezoelectric actuators with high precision.
- 1 February 2019
- Published by Elsevier in Ceramics International
- Vol. 45 (2) , 2338-2344
Regular and uniform-shaped BaTiO3 microplates prepared using a modified precursor
- 1 February 2019
- Published by Elsevier in Ceramics International
- Vol. 45 (2) , 2338-2344
Regular and uniform-shaped BaTiO3 microplates prepared using a modified precursor
- 9 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 59 (3) , 996-999
Folded Feedthrough Multilayer Ceramic Capacitor EMI Filter
A chip three-terminal multilayer ceramic capacitor (MLCC) electromagnetic interference (EMI) filter with a good stopband characteristic was designed. Parasitic effects on the internal signal electrode, including equivalent parallel capacitance and series inductance, were utilized to form a tunable transmission zero in stopband by folding the traditional chip three-terminal feedthrough MLCC. Based on a network theory, an equivalent circuit was constructed in ADS to explain the operating mechanism of the proposed structure. The ADS and HFSS were utilized to simulate the proposed structure, and the measured results corresponded to the simulation results. The structure of the proposed EMI filter presents a new method to improve the stopband characteristic of capacitor EMI filters.
- 9 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 59 (3) , 996-999
Folded Feedthrough Multilayer Ceramic Capacitor EMI Filter
A chip three-terminal multilayer ceramic capacitor (MLCC) electromagnetic interference (EMI) filter with a good stopband characteristic was designed. Parasitic effects on the internal signal electrode, including equivalent parallel capacitance and series inductance, were utilized to form a tunable transmission zero in stopband by folding the traditional chip three-terminal feedthrough MLCC. Based on a network theory, an equivalent circuit was constructed in ADS to explain the operating mechanism of the proposed structure. The ADS and HFSS were utilized to simulate the proposed structure, and the measured results corresponded to the simulation results. The structure of the proposed EMI filter presents a new method to improve the stopband characteristic of capacitor EMI filters.
- 22 September 2016
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 58 (12) , 3012-3015
Design of a low-profile H-plane siw horn antenna with modified flare walls
- 22 September 2016
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 58 (12) , 3012-3015
Design of a low-profile H-plane siw horn antenna with modified flare walls