Guifen Fan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guifen Fan has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Yihui Lou
School of Optical and Electronic Information, Huazhong University of Science and Technology, 12443 Wuhan, Hubei, China
2 shared publications Daen Zhao
College of Chemistry and Materials Science, Sichuan Normal University, Chengdu 610066, China
1 shared publication- Dunmin Lin
Sichuan Normal University
1 shared publication Fangfang Zeng
School of Optical and Electronic Information Huazhong University of Science and Technology Wuhan China
1 shared publicationFei Wang
School of Optical and Electronic Information Huazhong University of Science and Technology Wuhan China
1 shared publicationHua Wang
School of Electronic Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
1 shared publication
Latest Publications
- 15 August 2022
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 51 (36) , 13867-13877
Simultaneously enhanced energy density and discharge efficiency of (Na0.5Bi0.5)0.7Sr0.3TiO3-La1/3(Ta0.5Nb0.5)O3 lead-free energy storage ceramics via grain inhibition and dielectric peak flattening engineering
Energy storage ceramics are widely favored for their rapid charging/discharging speed, good temperature stability and large power density. Nevertheless, most lead-free energy storage ceramics can achieve excellent energy storage density (Wt) only under extremely high breakdown electric field and usually possess inferior efficiency (η). In this research, neoteric (1 − x)(Na0.5Bi0.5)0.7Sr0.3TiO3-xLa1/3(Ta0.5Nb0.5)O3 (NBST-xLTN) ceramics were designed by grain inhibition and dielectric peak flattening engineering to enhance Wt and η simultaneously under a low electric field (≤150 kV cm−1). In particular, in one aspect, multiple co-doping of the elements La3+, Ta5+ and Nb5+ as excellent grain growth inhibitors reduces the concentration of oxygen vacancies and refines the grain size to increase the breakdown strength. In another aspect, partial ion substitution in the A/B sites of BNST ceramics breaks the ferroelectric long-range order to generate polar nanoregions, resulting in a remarkable decrease in remanent polarization. Moreover, the incorporation of LTN distorts the lattice, causing a shift towards room temperature and flattening of dielectric peaks to promote the temperature/frequency stabilities significantly. Ultimately, the ultrahigh η of 92.49%, promising Wt of 2.09 J cm−3 and large Wrec of 1.94 J cm−3 under 148 kV cm−1 are achieved concurrently accompanied by the optimistic temperature, frequency and cyclic stabilities in the BNST-0.025LTN ceramic. Besides, outstanding power and current densities (PD and CD) of 67.86 MW cm−3 and 848.29 A cm−2 are procured in the BNST-0.025LTZ ceramic under a low electric field of 160 kV cm−1. The present strategies of grain inhibition and dielectric peak flattening engineering provide an effective approach to exploit novel lead-free ceramics with excellent energy storage properties.
- 15 August 2022
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 51 (36) , 13867-13877
Simultaneously enhanced energy density and discharge efficiency of (Na0.5Bi0.5)0.7Sr0.3TiO3-La1/3(Ta0.5Nb0.5)O3 lead-free energy storage ceramics via grain inhibition and dielectric peak flattening engineering
Energy storage ceramics are widely favored for their rapid charging/discharging speed, good temperature stability and large power density. Nevertheless, most lead-free energy storage ceramics can achieve excellent energy storage density (Wt) only under extremely high breakdown electric field and usually possess inferior efficiency (η). In this research, neoteric (1 − x)(Na0.5Bi0.5)0.7Sr0.3TiO3-xLa1/3(Ta0.5Nb0.5)O3 (NBST-xLTN) ceramics were designed by grain inhibition and dielectric peak flattening engineering to enhance Wt and η simultaneously under a low electric field (≤150 kV cm−1). In particular, in one aspect, multiple co-doping of the elements La3+, Ta5+ and Nb5+ as excellent grain growth inhibitors reduces the concentration of oxygen vacancies and refines the grain size to increase the breakdown strength. In another aspect, partial ion substitution in the A/B sites of BNST ceramics breaks the ferroelectric long-range order to generate polar nanoregions, resulting in a remarkable decrease in remanent polarization. Moreover, the incorporation of LTN distorts the lattice, causing a shift towards room temperature and flattening of dielectric peaks to promote the temperature/frequency stabilities significantly. Ultimately, the ultrahigh η of 92.49%, promising Wt of 2.09 J cm−3 and large Wrec of 1.94 J cm−3 under 148 kV cm−1 are achieved concurrently accompanied by the optimistic temperature, frequency and cyclic stabilities in the BNST-0.025LTN ceramic. Besides, outstanding power and current densities (PD and CD) of 67.86 MW cm−3 and 848.29 A cm−2 are procured in the BNST-0.025LTZ ceramic under a low electric field of 160 kV cm−1. The present strategies of grain inhibition and dielectric peak flattening engineering provide an effective approach to exploit novel lead-free ceramics with excellent energy storage properties.
- 22 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (2) , 234-238
Design of Ku-Band Flat Luneburg Lens Using Ceramic 3-D Printing
A flat Luneburg lens antenna for Ku-band (12—18 GHz) applications is proposed and designed using ceramic 3-D printing. Metamaterial structures and transformation optics technology are used to realize the gradient dielectric constant, compress the height, and reduce the weight of the Luneburg lens. The proposed 3-D printed Luneburg lens, combined with a 10-dB standard gain horn antenna, obtained an antenna gain up to 19.1 dBi over the operating frequency and the thickness reduction of 78%. In addition, the ability of the flat Luneburg lens to perform passive beam scanning with limited power loss is achieved. This exploration of ceramic 3-D printing can serve as reference for the development of ceramic components with complex structures.
- 22 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 20 (2) , 234-238
Design of Ku-Band Flat Luneburg Lens Using Ceramic 3-D Printing
A flat Luneburg lens antenna for Ku-band (12—18 GHz) applications is proposed and designed using ceramic 3-D printing. Metamaterial structures and transformation optics technology are used to realize the gradient dielectric constant, compress the height, and reduce the weight of the Luneburg lens. The proposed 3-D printed Luneburg lens, combined with a 10-dB standard gain horn antenna, obtained an antenna gain up to 19.1 dBi over the operating frequency and the thickness reduction of 78%. In addition, the ability of the flat Luneburg lens to perform passive beam scanning with limited power loss is achieved. This exploration of ceramic 3-D printing can serve as reference for the development of ceramic components with complex structures.
- 11 June 2020
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 103 (11) , 6226-6236
A quasi‐linear piezoelectric strain behavior of [001] textured rhombohedral PMN–24%PT ceramic
Highly textured (1–x)Pb(Mg1/3Nb2/3)O3‐xPbTiO3 (PMN–xPT) piezoelectric ceramics were fabricated. It was found that [001] textured rhombohedral PMN–24%PT ceramic exhibited a quasi‐linear piezoelectric strain behavior with low hysteresis. The strain hysteresis of PMN–24%PT ceramic was reduced from 22.5% to 9% at 30 kV/cm using the texture method. Accurate displacement was generated by DC field using textured PMN–24%PT ceramic. The domain configurations in textured PMN–xPT ceramics were figured out using the chemical etching method. It was demonstrated that the quasi‐linear and low‐hysteretic strain behavior was due to a fixed domain configuration. We predict that the textured PMN–24%PT ceramic will facilitate the development of low‐voltage driving piezoelectric actuators with high precision.
- 11 June 2020
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 103 (11) , 6226-6236
A quasi‐linear piezoelectric strain behavior of [001] textured rhombohedral PMN–24%PT ceramic
Highly textured (1–x)Pb(Mg1/3Nb2/3)O3‐xPbTiO3 (PMN–xPT) piezoelectric ceramics were fabricated. It was found that [001] textured rhombohedral PMN–24%PT ceramic exhibited a quasi‐linear piezoelectric strain behavior with low hysteresis. The strain hysteresis of PMN–24%PT ceramic was reduced from 22.5% to 9% at 30 kV/cm using the texture method. Accurate displacement was generated by DC field using textured PMN–24%PT ceramic. The domain configurations in textured PMN–xPT ceramics were figured out using the chemical etching method. It was demonstrated that the quasi‐linear and low‐hysteretic strain behavior was due to a fixed domain configuration. We predict that the textured PMN–24%PT ceramic will facilitate the development of low‐voltage driving piezoelectric actuators with high precision.
- 12 March 2018
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 29 (10) , 8279-8286
Impedance spectroscopy and piezoelectric property of LiF-doped PZN–PZT low-temperature sintering piezoelectric ceramics
- 12 March 2018
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 29 (10) , 8279-8286
Impedance spectroscopy and piezoelectric property of LiF-doped PZN–PZT low-temperature sintering piezoelectric ceramics