John Lam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
John Lam has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Mehdi Abbasi
Department of Electrical Engineering and Computer Science, York University, Toronto, ON, Canada
9 shared publications - Kajanan Kanathipan
Department of Electrical Engineering and Computer Science, York University, Toronto, ON, Canada
8 shared publications - Reza Emamalipour
Electrical Engineering and Computer Science, York University, Toronto, ONT, Canada
6 shared publications - Muhammad Ali Masood Cheema
School of Electrical Engineering and Telecommunications, University of New South Wales, Sydney, NSW, Australia
4 shared publications - Siamak Derakhshan
Department of Electrical Engineering and Computer Science, York University, Toronto, ON, Canada
4 shared publications - Atif Iqbal
Department of Electrical Engineering, Qatar University, Doha, Qatar
2 shared publications
Latest Publications
- 20 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (9) , 15876-15893
Coupled PV Step-Up Resonant Converter Modules With an Enhanced Efficiency Optimization Scheme for the Power Balancing Stage
An enhanced efficiency optimization control scheme for a modular photovoltaic (PV) step-up converter with embedded high frequency coupled power balancers over a wide operating range for Medium Voltage (MV) DC distribution is proposed in this article. By identifying and minimizing the duty-ratio of the lowest power module, the proposed interlinking power balancer controller optimizes the transmission of mismatched power through. This minimizes excess power transfer and power loss across each module's active voltage quadrupler (AVQ) switch which in turn enhances the overall system efficiency across a wide operating range. The proposed interlinking controller simultaneously achieves soft-switching operation on all AVQ circuits while maintaining a high step-up voltage conversion and per-module maximum power point tracking (MPPT). The configuration of the proposed system allows for additional modules to be added without requiring parameter changes to the existing system. The detailed analysis of the proposed efficiency optimization scheme and the power balancing technique of the presented modular PV converters are provided. Simulation results on a 15kW, 10kV-output (5 modules converter system) and hardware results on a scaled down proof-of-concept 1kW, 900V output (3 modules converter system) are given to highlight the features of the proposed system.
- 20 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (9) , 15876-15893
Coupled PV Step-Up Resonant Converter Modules With an Enhanced Efficiency Optimization Scheme for the Power Balancing Stage
An enhanced efficiency optimization control scheme for a modular photovoltaic (PV) step-up converter with embedded high frequency coupled power balancers over a wide operating range for Medium Voltage (MV) DC distribution is proposed in this article. By identifying and minimizing the duty-ratio of the lowest power module, the proposed interlinking power balancer controller optimizes the transmission of mismatched power through. This minimizes excess power transfer and power loss across each module's active voltage quadrupler (AVQ) switch which in turn enhances the overall system efficiency across a wide operating range. The proposed interlinking controller simultaneously achieves soft-switching operation on all AVQ circuits while maintaining a high step-up voltage conversion and per-module maximum power point tracking (MPPT). The configuration of the proposed system allows for additional modules to be added without requiring parameter changes to the existing system. The detailed analysis of the proposed efficiency optimization scheme and the power balancing technique of the presented modular PV converters are provided. Simulation results on a 15kW, 10kV-output (5 modules converter system) and hardware results on a scaled down proof-of-concept 1kW, 900V output (3 modules converter system) are given to highlight the features of the proposed system.
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (2) , 1484-1497
Modular High-Voltage Gain PV Converter With Embedded Output Power Balancer and a Controllable ZVS-Assisted Auxiliary Circuit for Extended Soft-Switching Range for MVDC Grid Application
This paper proposes a new modular interconnected step up DC-DC converter system that utilizes individual maximum power point tracking (MPPT), integrated modular output voltage distribution, and extended soft-switching range for input-independent output-series (IIOS) connected PV energy systems. The proposed DC-DC modules are capable of individual MPPT through phase-shift control on the input full-bridge inverter switches. An LLC resonant circuit allows for zero-voltage switching (ZVS) operation on the full-bridge inverter switches. By the use of an ZVS assisted auxiliary circuit controller, ZVS operation can be extended on all module switches over a wide range of MPPT conditions. By utilizing an active voltage doubler, the proposed system achieves balanced output voltage for each module which is typically a challenge for modular IIOS configurations. The system’s performance is verified with a five-module 100kHz, 20kW/15kV-output simulation and a 95kHz, 1.5kW/1.7kV-output two-module proof-of-concept hardware prototype with an efficiency range between 95.6% and 97.4%.
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (2) , 1484-1497
Modular High-Voltage Gain PV Converter With Embedded Output Power Balancer and a Controllable ZVS-Assisted Auxiliary Circuit for Extended Soft-Switching Range for MVDC Grid Application
This paper proposes a new modular interconnected step up DC-DC converter system that utilizes individual maximum power point tracking (MPPT), integrated modular output voltage distribution, and extended soft-switching range for input-independent output-series (IIOS) connected PV energy systems. The proposed DC-DC modules are capable of individual MPPT through phase-shift control on the input full-bridge inverter switches. An LLC resonant circuit allows for zero-voltage switching (ZVS) operation on the full-bridge inverter switches. By the use of an ZVS assisted auxiliary circuit controller, ZVS operation can be extended on all module switches over a wide range of MPPT conditions. By utilizing an active voltage doubler, the proposed system achieves balanced output voltage for each module which is typically a challenge for modular IIOS configurations. The system’s performance is verified with a five-module 100kHz, 20kW/15kV-output simulation and a 95kHz, 1.5kW/1.7kV-output two-module proof-of-concept hardware prototype with an efficiency range between 95.6% and 97.4%.
- 18 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (8) , 10912-10930
A Half-Bridge/Dual Stacked-Switches Structured AC/DC Electrolytic Capacitor-Less Bidirectional Converter With Soft-Switching for High-Voltage EV Charger
This article presents a half-bridge (HB)/dual stacked switches, fully soft-switched bidirectional electrolytic capacitor-less ac/dc resonant converter, tailored for high-voltage (HV) electric vehicle (EV) systems. The proposed converter integrates a closed-loop power factor correction (PFC)mechanism based on the $dq$ model of the input LCL filter, ensuring high-quality sinusoidal input current and reduced total harmonic distortion in both ac/dc conversion and dc/ac inversion modes. The front-end HB PFC circuit operates in continuous conduction mode with soft-switching operation, which eliminates the high peak current issue that happens in the switches in discontinuous conduction mode. Moreover, the dual stacked switches configuration of the proposed converter reduces the voltage stress on the switches to half of the dc-link and output voltage. A dedicated duty ratio-based closed-loop control system in both primary and secondary sides of the dual-stacked-switches resonant converter drastically reduces the double-line frequency voltage ripple, thereby eliminating the need for bulky electrolytic storage capacitors. Output voltage regulation in ac/dc conversion mode is achieved through variable frequency modulation, and soft-switching is maintained for all switches for all the operating condition in both modes. The performance of the proposed bidirectional converter is validated through a 1 kW, 120 V rms/750 V dc proof-of-concept prototype.
- 18 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (8) , 10912-10930
A Half-Bridge/Dual Stacked-Switches Structured AC/DC Electrolytic Capacitor-Less Bidirectional Converter With Soft-Switching for High-Voltage EV Charger
This article presents a half-bridge (HB)/dual stacked switches, fully soft-switched bidirectional electrolytic capacitor-less ac/dc resonant converter, tailored for high-voltage (HV) electric vehicle (EV) systems. The proposed converter integrates a closed-loop power factor correction (PFC)mechanism based on the $dq$ model of the input LCL filter, ensuring high-quality sinusoidal input current and reduced total harmonic distortion in both ac/dc conversion and dc/ac inversion modes. The front-end HB PFC circuit operates in continuous conduction mode with soft-switching operation, which eliminates the high peak current issue that happens in the switches in discontinuous conduction mode. Moreover, the dual stacked switches configuration of the proposed converter reduces the voltage stress on the switches to half of the dc-link and output voltage. A dedicated duty ratio-based closed-loop control system in both primary and secondary sides of the dual-stacked-switches resonant converter drastically reduces the double-line frequency voltage ripple, thereby eliminating the need for bulky electrolytic storage capacitors. Output voltage regulation in ac/dc conversion mode is achieved through variable frequency modulation, and soft-switching is maintained for all switches for all the operating condition in both modes. The performance of the proposed bidirectional converter is validated through a 1 kW, 120 V rms/750 V dc proof-of-concept prototype.
- 21 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (4) , 3439-3455
A Bridgeless, Stacked Switch-Pair-Based AC/DC On-Board High-Voltage EV Charger With Minimal Storage Capacitance Featuring Continuous Secondary-Side High-Frequency Rectifier Control
In this paper, a fully soft-switched single-stage bridgeless stacked switches-based rectifier with reduced storage capacitance and minimized low-frequency output voltage ripple for high-voltage (HV) Electric Vehicle (EV) systems is proposed. Generally, bulky DC-link and filter electrolytic-type capacitors used in AC-DC converters reduces the converter’s reliability and life-span. To address this issue, a bridgeless AC-DC isolated converter with stacked switches configuration on both the primary and secondary sides that employs a continuous secondary side duty ratio control to reduce the low frequency output voltage ripple is presented. A front-end primary side duty ratio control for achieving power factor correction (PFC) for the integrated bridgeless boost PFC is also employed. The stacked switches-based configuration of the converter reduces the voltage stress of the switches to half of the DC-link voltage, making the converter suitable for HV battery systems. Soft-switching operation is guaranteed for all the semiconductor devices. Additionally, output voltage regulation is achieved through a Variable Frequency (VF) control on the primary-side switches. The steady-state and dynamic performance of the proposed converter and the designed control system are verified using a 1.1kW, 120V rms /800V dc , 100-120kHz SiC proof-of-Concept proto-type in the laboratory.
- 21 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (4) , 3439-3455
A Bridgeless, Stacked Switch-Pair-Based AC/DC On-Board High-Voltage EV Charger With Minimal Storage Capacitance Featuring Continuous Secondary-Side High-Frequency Rectifier Control
In this paper, a fully soft-switched single-stage bridgeless stacked switches-based rectifier with reduced storage capacitance and minimized low-frequency output voltage ripple for high-voltage (HV) Electric Vehicle (EV) systems is proposed. Generally, bulky DC-link and filter electrolytic-type capacitors used in AC-DC converters reduces the converter’s reliability and life-span. To address this issue, a bridgeless AC-DC isolated converter with stacked switches configuration on both the primary and secondary sides that employs a continuous secondary side duty ratio control to reduce the low frequency output voltage ripple is presented. A front-end primary side duty ratio control for achieving power factor correction (PFC) for the integrated bridgeless boost PFC is also employed. The stacked switches-based configuration of the converter reduces the voltage stress of the switches to half of the DC-link voltage, making the converter suitable for HV battery systems. Soft-switching operation is guaranteed for all the semiconductor devices. Additionally, output voltage regulation is achieved through a Variable Frequency (VF) control on the primary-side switches. The steady-state and dynamic performance of the proposed converter and the designed control system are verified using a 1.1kW, 120V rms /800V dc , 100-120kHz SiC proof-of-Concept proto-type in the laboratory.
- 23 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (2) , 1769-1781
High-Frequency Interlinking High-Voltage Gain PV Converter Modules With Embedded Power Balancing Technique for DC-Distributed System
A new high frequency (HF) interlinking photovoltaic (PV) step-up converter modules utilizing an embedded power balancing technique while featuring individual single-sensor maximum power point tracking (MPPT) is presented in this paper. An integrated boost-CLL (Capacitor-Inductor-Inductor) resonant circuit at the input allows for both MPPT and soft-switching operation at all conditions for each module while HF coupled output inductors together with the proposed active voltage quadrupler (AVQ) allows for regulated power flow between HF interlinking modules. The proposed technique allows the modular PV converter system to achieve simultaneous MPPT, soft-switching operation, and equal power distribution without the use of additional circuitry. The HF interlinking nature of the system allows for additional modules to be added without requiring parameter changes for existing modules. Analysis of the proposed converter system is discussed in this paper. The performance of the proposed PV power balancing technique is validated through simulation results on a modular 13kW, 10kV-output system and hardware experimental results on a scaled down modular 500W, 850V-output prototype system.
- 23 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (2) , 1769-1781
High-Frequency Interlinking High-Voltage Gain PV Converter Modules With Embedded Power Balancing Technique for DC-Distributed System
A new high frequency (HF) interlinking photovoltaic (PV) step-up converter modules utilizing an embedded power balancing technique while featuring individual single-sensor maximum power point tracking (MPPT) is presented in this paper. An integrated boost-CLL (Capacitor-Inductor-Inductor) resonant circuit at the input allows for both MPPT and soft-switching operation at all conditions for each module while HF coupled output inductors together with the proposed active voltage quadrupler (AVQ) allows for regulated power flow between HF interlinking modules. The proposed technique allows the modular PV converter system to achieve simultaneous MPPT, soft-switching operation, and equal power distribution without the use of additional circuitry. The HF interlinking nature of the system allows for additional modules to be added without requiring parameter changes for existing modules. Analysis of the proposed converter system is discussed in this paper. The performance of the proposed PV power balancing technique is validated through simulation results on a modular 13kW, 10kV-output system and hardware experimental results on a scaled down modular 500W, 850V-output prototype system.
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (5) , 5967-5981
A Multi-Mode Full-Bridge/Modified-Stacked- Switches Structured CLLC Resonant Converter for Energy Storage Applications
In this article, a new full-bridge/modified-stackedswitches multi-mode CLLC isolated resonant converter is presented for energy storage applications. In particular, a multimode wide voltage gain control system is proposed, which takes advantage of the topology reconfiguration method in both the inverter and the rectifier blocks in the proposed circuit to regulate the output voltage while preventing the switching frequency from drifting away far from the resonant frequency. The impact of the parasitic elements in the isolated CLLC resonant circuit is also investigated in this paper. In addition, a smooth mode transition is provided to avoid any transients caused by a rapid frequency change. The operating principles of the control system is analyzed extensively. Compared with the traditional Pulse-Frequency Modulated (PFM) resonant converters, the proposed control system attains enhanced efficiency even at extremely low voltage gains while sustaining a nearly consistent high-efficiency profile. Furthermore, it mitigates voltage regulation instability under light loads attributed to parasitic components by constraining the frequency spectrum. The proposed control system presents an appealing solution for high-voltage, high-power energy storage applications that demand a broad range of voltage gains and where the influence of switch R dsON is reduced due to the low current characteristics typical of these applications. Finally, a 500 W 100 V-350 V input, 96 V output prototype has been built to verify the performance of the proposed converter system.
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (5) , 5967-5981
A Multi-Mode Full-Bridge/Modified-Stacked- Switches Structured CLLC Resonant Converter for Energy Storage Applications
In this article, a new full-bridge/modified-stackedswitches multi-mode CLLC isolated resonant converter is presented for energy storage applications. In particular, a multimode wide voltage gain control system is proposed, which takes advantage of the topology reconfiguration method in both the inverter and the rectifier blocks in the proposed circuit to regulate the output voltage while preventing the switching frequency from drifting away far from the resonant frequency. The impact of the parasitic elements in the isolated CLLC resonant circuit is also investigated in this paper. In addition, a smooth mode transition is provided to avoid any transients caused by a rapid frequency change. The operating principles of the control system is analyzed extensively. Compared with the traditional Pulse-Frequency Modulated (PFM) resonant converters, the proposed control system attains enhanced efficiency even at extremely low voltage gains while sustaining a nearly consistent high-efficiency profile. Furthermore, it mitigates voltage regulation instability under light loads attributed to parasitic components by constraining the frequency spectrum. The proposed control system presents an appealing solution for high-voltage, high-power energy storage applications that demand a broad range of voltage gains and where the influence of switch R dsON is reduced due to the low current characteristics typical of these applications. Finally, a 500 W 100 V-350 V input, 96 V output prototype has been built to verify the performance of the proposed converter system.
- 5 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 39 (1) , 647-660
A Robust H∞ State Feedback Controller Enabling a Medium Voltage Five-Level Grid-Connected Inverter for Grid Code Compliance
A novel robust ${H}_\infty $ state-feedback control system providing optimal stability as well as robust performance for a three-phase medium voltage five-level grid-connected inverter is proposed in this paper. The proposed one Degree of Freedom (DoF) control system provides high-quality sinusoidal grid current and guarantees optimal robust performance for the grid-connected five-level inverter in case of grid voltage disturbances, grid-side inductor parametric uncertainty, and ensures optimal reference tracking with optimal transient response in case of different grid fault scenarios following different grid standards such as the North American Electricity Reliability Corporation (NERC) and IEEE Std 2800-2022. To that end, the parametric uncertainty of the system is modeled as a polytopic-type uncertainty and a Linear Matrix Inequality (LMI)-based state-feedback controller based on convex optimization is implemented on the five-level grid-connected inverter. The system modelling as well as the design of the proposed controller will be discussed in this paper. The performance of the designed controller with the five-level grid-connected inverter is tested under different scenarios. Results are provided in PSCAD on a 5 MW, 34.5 kV system to validate the effectiveness of the proposed robust ${H}_\infty $ control system. Moreover, scaled-down hardware test results are provided to further validate the performance of the controller.
- 5 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 39 (1) , 647-660
A Robust H∞ State Feedback Controller Enabling a Medium Voltage Five-Level Grid-Connected Inverter for Grid Code Compliance
A novel robust ${H}_\infty $ state-feedback control system providing optimal stability as well as robust performance for a three-phase medium voltage five-level grid-connected inverter is proposed in this paper. The proposed one Degree of Freedom (DoF) control system provides high-quality sinusoidal grid current and guarantees optimal robust performance for the grid-connected five-level inverter in case of grid voltage disturbances, grid-side inductor parametric uncertainty, and ensures optimal reference tracking with optimal transient response in case of different grid fault scenarios following different grid standards such as the North American Electricity Reliability Corporation (NERC) and IEEE Std 2800-2022. To that end, the parametric uncertainty of the system is modeled as a polytopic-type uncertainty and a Linear Matrix Inequality (LMI)-based state-feedback controller based on convex optimization is implemented on the five-level grid-connected inverter. The system modelling as well as the design of the proposed controller will be discussed in this paper. The performance of the designed controller with the five-level grid-connected inverter is tested under different scenarios. Results are provided in PSCAD on a 5 MW, 34.5 kV system to validate the effectiveness of the proposed robust ${H}_\infty $ control system. Moreover, scaled-down hardware test results are provided to further validate the performance of the controller.
- Open Access
- 14 March 2023
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 16 (10) , 1621-1624
Guest editorial: Medium‐ and high‐frequency converters for low‐ and medium‐voltage applications
- 14 March 2023
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 16 (10) , 1621-1624
Open AccessGuest editorial: Medium‐ and high‐frequency converters for low‐ and medium‐voltage applications
- 9 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (2) , 1838-1853
A Multimode Control Scheme for Output Regulation and Voltage Balancing in a Stacked-Switch Resonant Converter With Extended High Efficiency for Wide Gain Range Applications
In this article, a new hybrid comprehensive multi-mode control system is proposed for a stacked-switch bidirectional CLLC resonant converter for wide voltage gain applications. By configuring the presented leg with different switching patterns, the presented leg in the converter can operate in different modes: Full-Wave (FW), Half-Wave (HW), or Voltage-Doubler (VD) through the converter’s built-in circuit redundancy. The proposed hybrid control scheme consists of different control modes: variable frequency modulation, PWM and asymmetric PWM control. Correspondingly, four voltage gain curves are derived from the proposed converter. With the proposed approach, the converter is able to achieve constant voltage regulation while constraining the range of switching frequency, allowing very high efficiencies to be realized for a wide range of input voltages. Soft-switching is achieved for all the semiconductor devices for the entire operating range. The steady state and dynamic performance of the proposed hybrid comprehensive control system are verified through a proof-of-concept 400V~1kV / 700V, 1kW laboratory prototype. Results confirmed that the efficiency is maintained between 95.03% and 96.97% throughout the specified input voltage range.
- 9 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (2) , 1838-1853
A Multimode Control Scheme for Output Regulation and Voltage Balancing in a Stacked-Switch Resonant Converter With Extended High Efficiency for Wide Gain Range Applications
In this article, a new hybrid comprehensive multi-mode control system is proposed for a stacked-switch bidirectional CLLC resonant converter for wide voltage gain applications. By configuring the presented leg with different switching patterns, the presented leg in the converter can operate in different modes: Full-Wave (FW), Half-Wave (HW), or Voltage-Doubler (VD) through the converter’s built-in circuit redundancy. The proposed hybrid control scheme consists of different control modes: variable frequency modulation, PWM and asymmetric PWM control. Correspondingly, four voltage gain curves are derived from the proposed converter. With the proposed approach, the converter is able to achieve constant voltage regulation while constraining the range of switching frequency, allowing very high efficiencies to be realized for a wide range of input voltages. Soft-switching is achieved for all the semiconductor devices for the entire operating range. The steady state and dynamic performance of the proposed hybrid comprehensive control system are verified through a proof-of-concept 400V~1kV / 700V, 1kW laboratory prototype. Results confirmed that the efficiency is maintained between 95.03% and 96.97% throughout the specified input voltage range.