Siamak Derakhshan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Siamak Derakhshan has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- John Lam
Department of Electrical Engineering and Computer Science, York University, Toronto, ON, Canada
4 shared publications - Frede Blaabjerg
Aalborg University
1 shared publication - Kajanan Kanathipan
Department of Electrical Engineering and Computer Science, York University, Toronto, ON, Canada
1 shared publication - Marjan Shafiee-Rad
Department of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran
1 shared publication - Mehdi Abbasi
Department of Electrical Engineering and Computer Science, York University, Toronto, ON, Canada
1 shared publication - Mohammad Reza Jahed-Motlagh
Iran University of Science and Technology
1 shared publication
Latest Publications
- 18 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (8) , 10912-10930
A Half-Bridge/Dual Stacked-Switches Structured AC/DC Electrolytic Capacitor-Less Bidirectional Converter With Soft-Switching for High-Voltage EV Charger
This article presents a half-bridge (HB)/dual stacked switches, fully soft-switched bidirectional electrolytic capacitor-less ac/dc resonant converter, tailored for high-voltage (HV) electric vehicle (EV) systems. The proposed converter integrates a closed-loop power factor correction (PFC)mechanism based on the $dq$ model of the input LCL filter, ensuring high-quality sinusoidal input current and reduced total harmonic distortion in both ac/dc conversion and dc/ac inversion modes. The front-end HB PFC circuit operates in continuous conduction mode with soft-switching operation, which eliminates the high peak current issue that happens in the switches in discontinuous conduction mode. Moreover, the dual stacked switches configuration of the proposed converter reduces the voltage stress on the switches to half of the dc-link and output voltage. A dedicated duty ratio-based closed-loop control system in both primary and secondary sides of the dual-stacked-switches resonant converter drastically reduces the double-line frequency voltage ripple, thereby eliminating the need for bulky electrolytic storage capacitors. Output voltage regulation in ac/dc conversion mode is achieved through variable frequency modulation, and soft-switching is maintained for all switches for all the operating condition in both modes. The performance of the proposed bidirectional converter is validated through a 1 kW, 120 V rms/750 V dc proof-of-concept prototype.
- 18 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (8) , 10912-10930
A Half-Bridge/Dual Stacked-Switches Structured AC/DC Electrolytic Capacitor-Less Bidirectional Converter With Soft-Switching for High-Voltage EV Charger
This article presents a half-bridge (HB)/dual stacked switches, fully soft-switched bidirectional electrolytic capacitor-less ac/dc resonant converter, tailored for high-voltage (HV) electric vehicle (EV) systems. The proposed converter integrates a closed-loop power factor correction (PFC)mechanism based on the $dq$ model of the input LCL filter, ensuring high-quality sinusoidal input current and reduced total harmonic distortion in both ac/dc conversion and dc/ac inversion modes. The front-end HB PFC circuit operates in continuous conduction mode with soft-switching operation, which eliminates the high peak current issue that happens in the switches in discontinuous conduction mode. Moreover, the dual stacked switches configuration of the proposed converter reduces the voltage stress on the switches to half of the dc-link and output voltage. A dedicated duty ratio-based closed-loop control system in both primary and secondary sides of the dual-stacked-switches resonant converter drastically reduces the double-line frequency voltage ripple, thereby eliminating the need for bulky electrolytic storage capacitors. Output voltage regulation in ac/dc conversion mode is achieved through variable frequency modulation, and soft-switching is maintained for all switches for all the operating condition in both modes. The performance of the proposed bidirectional converter is validated through a 1 kW, 120 V rms/750 V dc proof-of-concept prototype.
- 21 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (4) , 3439-3455
A Bridgeless, Stacked Switch-Pair-Based AC/DC On-Board High-Voltage EV Charger With Minimal Storage Capacitance Featuring Continuous Secondary-Side High-Frequency Rectifier Control
In this paper, a fully soft-switched single-stage bridgeless stacked switches-based rectifier with reduced storage capacitance and minimized low-frequency output voltage ripple for high-voltage (HV) Electric Vehicle (EV) systems is proposed. Generally, bulky DC-link and filter electrolytic-type capacitors used in AC-DC converters reduces the converter’s reliability and life-span. To address this issue, a bridgeless AC-DC isolated converter with stacked switches configuration on both the primary and secondary sides that employs a continuous secondary side duty ratio control to reduce the low frequency output voltage ripple is presented. A front-end primary side duty ratio control for achieving power factor correction (PFC) for the integrated bridgeless boost PFC is also employed. The stacked switches-based configuration of the converter reduces the voltage stress of the switches to half of the DC-link voltage, making the converter suitable for HV battery systems. Soft-switching operation is guaranteed for all the semiconductor devices. Additionally, output voltage regulation is achieved through a Variable Frequency (VF) control on the primary-side switches. The steady-state and dynamic performance of the proposed converter and the designed control system are verified using a 1.1kW, 120V rms /800V dc , 100-120kHz SiC proof-of-Concept proto-type in the laboratory.
- 21 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (4) , 3439-3455
A Bridgeless, Stacked Switch-Pair-Based AC/DC On-Board High-Voltage EV Charger With Minimal Storage Capacitance Featuring Continuous Secondary-Side High-Frequency Rectifier Control
In this paper, a fully soft-switched single-stage bridgeless stacked switches-based rectifier with reduced storage capacitance and minimized low-frequency output voltage ripple for high-voltage (HV) Electric Vehicle (EV) systems is proposed. Generally, bulky DC-link and filter electrolytic-type capacitors used in AC-DC converters reduces the converter’s reliability and life-span. To address this issue, a bridgeless AC-DC isolated converter with stacked switches configuration on both the primary and secondary sides that employs a continuous secondary side duty ratio control to reduce the low frequency output voltage ripple is presented. A front-end primary side duty ratio control for achieving power factor correction (PFC) for the integrated bridgeless boost PFC is also employed. The stacked switches-based configuration of the converter reduces the voltage stress of the switches to half of the DC-link voltage, making the converter suitable for HV battery systems. Soft-switching operation is guaranteed for all the semiconductor devices. Additionally, output voltage regulation is achieved through a Variable Frequency (VF) control on the primary-side switches. The steady-state and dynamic performance of the proposed converter and the designed control system are verified using a 1.1kW, 120V rms /800V dc , 100-120kHz SiC proof-of-Concept proto-type in the laboratory.
- 5 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 39 (1) , 647-660
A Robust H∞ State Feedback Controller Enabling a Medium Voltage Five-Level Grid-Connected Inverter for Grid Code Compliance
A novel robust ${H}_\infty $ state-feedback control system providing optimal stability as well as robust performance for a three-phase medium voltage five-level grid-connected inverter is proposed in this paper. The proposed one Degree of Freedom (DoF) control system provides high-quality sinusoidal grid current and guarantees optimal robust performance for the grid-connected five-level inverter in case of grid voltage disturbances, grid-side inductor parametric uncertainty, and ensures optimal reference tracking with optimal transient response in case of different grid fault scenarios following different grid standards such as the North American Electricity Reliability Corporation (NERC) and IEEE Std 2800-2022. To that end, the parametric uncertainty of the system is modeled as a polytopic-type uncertainty and a Linear Matrix Inequality (LMI)-based state-feedback controller based on convex optimization is implemented on the five-level grid-connected inverter. The system modelling as well as the design of the proposed controller will be discussed in this paper. The performance of the designed controller with the five-level grid-connected inverter is tested under different scenarios. Results are provided in PSCAD on a 5 MW, 34.5 kV system to validate the effectiveness of the proposed robust ${H}_\infty $ control system. Moreover, scaled-down hardware test results are provided to further validate the performance of the controller.
- 5 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 39 (1) , 647-660
A Robust H∞ State Feedback Controller Enabling a Medium Voltage Five-Level Grid-Connected Inverter for Grid Code Compliance
A novel robust ${H}_\infty $ state-feedback control system providing optimal stability as well as robust performance for a three-phase medium voltage five-level grid-connected inverter is proposed in this paper. The proposed one Degree of Freedom (DoF) control system provides high-quality sinusoidal grid current and guarantees optimal robust performance for the grid-connected five-level inverter in case of grid voltage disturbances, grid-side inductor parametric uncertainty, and ensures optimal reference tracking with optimal transient response in case of different grid fault scenarios following different grid standards such as the North American Electricity Reliability Corporation (NERC) and IEEE Std 2800-2022. To that end, the parametric uncertainty of the system is modeled as a polytopic-type uncertainty and a Linear Matrix Inequality (LMI)-based state-feedback controller based on convex optimization is implemented on the five-level grid-connected inverter. The system modelling as well as the design of the proposed controller will be discussed in this paper. The performance of the designed controller with the five-level grid-connected inverter is tested under different scenarios. Results are provided in PSCAD on a 5 MW, 34.5 kV system to validate the effectiveness of the proposed robust ${H}_\infty $ control system. Moreover, scaled-down hardware test results are provided to further validate the performance of the controller.
- 9 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (2) , 1838-1853
A Multimode Control Scheme for Output Regulation and Voltage Balancing in a Stacked-Switch Resonant Converter With Extended High Efficiency for Wide Gain Range Applications
In this article, a new hybrid comprehensive multi-mode control system is proposed for a stacked-switch bidirectional CLLC resonant converter for wide voltage gain applications. By configuring the presented leg with different switching patterns, the presented leg in the converter can operate in different modes: Full-Wave (FW), Half-Wave (HW), or Voltage-Doubler (VD) through the converter’s built-in circuit redundancy. The proposed hybrid control scheme consists of different control modes: variable frequency modulation, PWM and asymmetric PWM control. Correspondingly, four voltage gain curves are derived from the proposed converter. With the proposed approach, the converter is able to achieve constant voltage regulation while constraining the range of switching frequency, allowing very high efficiencies to be realized for a wide range of input voltages. Soft-switching is achieved for all the semiconductor devices for the entire operating range. The steady state and dynamic performance of the proposed hybrid comprehensive control system are verified through a proof-of-concept 400V~1kV / 700V, 1kW laboratory prototype. Results confirmed that the efficiency is maintained between 95.03% and 96.97% throughout the specified input voltage range.
- 9 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (2) , 1838-1853
A Multimode Control Scheme for Output Regulation and Voltage Balancing in a Stacked-Switch Resonant Converter With Extended High Efficiency for Wide Gain Range Applications
In this article, a new hybrid comprehensive multi-mode control system is proposed for a stacked-switch bidirectional CLLC resonant converter for wide voltage gain applications. By configuring the presented leg with different switching patterns, the presented leg in the converter can operate in different modes: Full-Wave (FW), Half-Wave (HW), or Voltage-Doubler (VD) through the converter’s built-in circuit redundancy. The proposed hybrid control scheme consists of different control modes: variable frequency modulation, PWM and asymmetric PWM control. Correspondingly, four voltage gain curves are derived from the proposed converter. With the proposed approach, the converter is able to achieve constant voltage regulation while constraining the range of switching frequency, allowing very high efficiencies to be realized for a wide range of input voltages. Soft-switching is achieved for all the semiconductor devices for the entire operating range. The steady state and dynamic performance of the proposed hybrid comprehensive control system are verified through a proof-of-concept 400V~1kV / 700V, 1kW laboratory prototype. Results confirmed that the efficiency is maintained between 95.03% and 96.97% throughout the specified input voltage range.
- 26 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 9 (5) , 5508-5520
Decentralized Voltage Control of Autonomous DC Microgrids With Robust Performance Approach
In this article, we propose an optimal decentralized robust $H_\infty $ control system for the voltage control problem of autonomous uncertain dc microgrids consisting of multiple distributed generations (DGs) with general topology. The one-degree-of-freedom (DoF) structure of the developed control system guarantees the robust performance of the system as well as its robust stability against various sources of uncertainty, such as plug-and-play (PnP) operation of the DGs, topology changes, large load perturbations, different subsequent system changes, and the presence of constant power loads (CPLs). To that end, the uncertain dc microgrid is modeled as a Linear Time-Invariant (LTI) polytopic state-space system. Then, a state-feedback control technique based on linear matrix inequality (LMI) with linearly parameter-dependent (LPD) Lyapunov matrices is implemented on the uncertain dc microgrids. The proposed controller does not require any sort of communications, and the robust performance property of the controller eliminates the need for prefilter design. The efficiency of the proposed controller is analyzed by simulating different case studies through SimPowerSystems Toolbox in MATLAB. Finally, the performance of the proposed control method is validated via experimental studies.
- 26 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 9 (5) , 5508-5520
Decentralized Voltage Control of Autonomous DC Microgrids With Robust Performance Approach
In this article, we propose an optimal decentralized robust $H_\infty $ control system for the voltage control problem of autonomous uncertain dc microgrids consisting of multiple distributed generations (DGs) with general topology. The one-degree-of-freedom (DoF) structure of the developed control system guarantees the robust performance of the system as well as its robust stability against various sources of uncertainty, such as plug-and-play (PnP) operation of the DGs, topology changes, large load perturbations, different subsequent system changes, and the presence of constant power loads (CPLs). To that end, the uncertain dc microgrid is modeled as a Linear Time-Invariant (LTI) polytopic state-space system. Then, a state-feedback control technique based on linear matrix inequality (LMI) with linearly parameter-dependent (LPD) Lyapunov matrices is implemented on the uncertain dc microgrids. The proposed controller does not require any sort of communications, and the robust performance property of the controller eliminates the need for prefilter design. The efficiency of the proposed controller is analyzed by simulating different case studies through SimPowerSystems Toolbox in MATLAB. Finally, the performance of the proposed control method is validated via experimental studies.