Il’yA A. Levin
Il’yA A. Levin has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Grigoriy Isaevitch Greisukh
Penza State University of Architecture and Construction
8 shared publications - Evgeniy G. Ezhov
Penza State University of Architecture and Construction
4 shared publications E. G. Ezhov
Penza State University of Architecture and Construction
2 shared publicationsA. V. Kalashnikov
Penza State University of Architecture and Civil Engineering
1 shared publicationEvgeniy G. Ezhov
Penza State University of Architecture and Construction, 28 Titov Street, 440028 Penza, Russia
1 shared publicationGrigory I. Greĭsukh
Penza State University of Architecture and Construction
1 shared publication
Latest Publications
- 1 March 2026
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 93 (3)
Basic paraxial characteristics of gradient-index optical elements
Subject of study. The paraxial characteristics of a radial-gradient-index plane-parallel plate and lens are investigated. Purpose of study. The purpose of this study is to derive expressions that are both convenient for practical application and sufficiently accurate for determining the paraxial characteristics of radial-gradient-index optical elements. Method. The study is based on theoretical analysis supported by numerical calculations. Main results. Formulas are derived for calculating the optical power, front and back focal lengths, and positions of the front and back principal planes of radial-gradient-index plane-parallel plates and lenses. The analysis demonstrates that these formulas are substantially simplified when the parameter K, which includes the base refractive index, the element thickness, and the first radial gradient-index coefficient, is much smaller than unity. The relative errors in the calculated paraxial characteristics do not exceed 1.12% for K K Practical significance. The proposed formulae make it possible to obtain reliable values of the paraxial and dispersion characteristics of optical systems containing gradient-index elements by supplementing conventional calculation procedures with only a small number of simple algebraic expressions.
- 1 March 2026
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 93 (3)
Basic paraxial characteristics of gradient-index optical elements
Subject of study. The paraxial characteristics of a radial-gradient-index plane-parallel plate and lens are investigated. Purpose of study. The purpose of this study is to derive expressions that are both convenient for practical application and sufficiently accurate for determining the paraxial characteristics of radial-gradient-index optical elements. Method. The study is based on theoretical analysis supported by numerical calculations. Main results. Formulas are derived for calculating the optical power, front and back focal lengths, and positions of the front and back principal planes of radial-gradient-index plane-parallel plates and lenses. The analysis demonstrates that these formulas are substantially simplified when the parameter K, which includes the base refractive index, the element thickness, and the first radial gradient-index coefficient, is much smaller than unity. The relative errors in the calculated paraxial characteristics do not exceed 1.12% for K K Practical significance. The proposed formulae make it possible to obtain reliable values of the paraxial and dispersion characteristics of optical systems containing gradient-index elements by supplementing conventional calculation procedures with only a small number of simple algebraic expressions.
- 1 January 2026
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 93 (1) , 38-43
Calculating and optimizing the parameters of a laminated radial gradient-index lens subjected to polychromatic radiation under temperature fluctuations
Subject of study. A radial gradient-index lens (RGL) in an infinitely thin objective model is studied. Aim of study. This study aims to develop a method for calculating and optimizing the parameters of a laminated RGL in an infinitely thin objective model and a method for optimizing the calculated parameters during the automatic aberration correction of an optical system operating in the mid- and long-wavelength infrared spectral ranges under temperature fluctuations. Method. Theoretical analysis and mathematical modeling were performed using geometric optics equations. Main results. A method for numerically determining the characteristics of an RGL was proposed. When combined with other optical elements, the calculated characteristics of the RGL ensured constant optical power of an infinitely thin objective model at three wavelengths within the spectral range and at the boundary values of the temperature interval. Equations were derived to calculate the parameters of an RGL and used to develop a macro integrated into the optimization function of a commercial optical design program. The developed macro enables the automatic aberration correction of an objective equipped with an RGL subjected to polychromatic radiation under temperature fluctuations. The effectiveness of the proposed macro was demonstrated by using it to automatically correct the aberration of the axial ray bundle in an objective with an RGL during the transition from an infinitely thin model to finite-thickness elements. Practical significance. The proposed methodology can facilitate the acquisition of the structural parameters of the initial optical layout during the preliminary design of an objective equipped with an RGL.
- 1 January 2026
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 93 (1) , 38-43
Calculating and optimizing the parameters of a laminated radial gradient-index lens subjected to polychromatic radiation under temperature fluctuations
Subject of study. A radial gradient-index lens (RGL) in an infinitely thin objective model is studied. Aim of study. This study aims to develop a method for calculating and optimizing the parameters of a laminated RGL in an infinitely thin objective model and a method for optimizing the calculated parameters during the automatic aberration correction of an optical system operating in the mid- and long-wavelength infrared spectral ranges under temperature fluctuations. Method. Theoretical analysis and mathematical modeling were performed using geometric optics equations. Main results. A method for numerically determining the characteristics of an RGL was proposed. When combined with other optical elements, the calculated characteristics of the RGL ensured constant optical power of an infinitely thin objective model at three wavelengths within the spectral range and at the boundary values of the temperature interval. Equations were derived to calculate the parameters of an RGL and used to develop a macro integrated into the optimization function of a commercial optical design program. The developed macro enables the automatic aberration correction of an objective equipped with an RGL subjected to polychromatic radiation under temperature fluctuations. The effectiveness of the proposed macro was demonstrated by using it to automatically correct the aberration of the axial ray bundle in an objective with an RGL during the transition from an infinitely thin model to finite-thickness elements. Practical significance. The proposed methodology can facilitate the acquisition of the structural parameters of the initial optical layout during the preliminary design of an objective equipped with an RGL.
- 1 March 2025
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 92 (3) , 183-188
Methodology for the design of infrared objectives with homogeneous, gradient-index, and diffractive elements
Subject of study. This study was focused on simple-design infrared (IR) objectives, including either a single coaxial-laminated radial gradient-index (GRIN) lens or a combination of a GRIN lens and a diffractive optical element, in addition to homogeneous lenses. Aim of study. The aim of this study was to develop a methodology for the layout design and calculation of simple-design IR objectives with a hybrid element base. Method. The methodology included theoretical analyses, computer modeling, and optimization with the Zemax optical design software. Main results. The proposed methodology covers all stages of the layout design and calculation of the objective. It includes the selection of optical materials for all its elements, as well as recommendations for using the optical scheme obtained under the conditions of achromatization, apochromatization, or superchromatization as the initial scheme for subsequent optimization in Zemax. The methodology also provides guidelines for combining a GRIN lens with a diffractive optical element in the design and calculation of an ultra-high-speed dual-band gradient-diffractive objective. The effectiveness of the combined use of GRIN and diffractive elements and that of the proposed methodology are demonstrated through a calculation example of an ultra-high-aperture gradient-diffractive objective. Practical significance. The results of this study highlight the possibility of developing simple-design, high-aperture, dual-band IR objectives based on coaxial-laminated radial GRIN lenses.
- 1 March 2025
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 92 (3) , 183-188
Methodology for the design of infrared objectives with homogeneous, gradient-index, and diffractive elements
Subject of study. This study was focused on simple-design infrared (IR) objectives, including either a single coaxial-laminated radial gradient-index (GRIN) lens or a combination of a GRIN lens and a diffractive optical element, in addition to homogeneous lenses. Aim of study. The aim of this study was to develop a methodology for the layout design and calculation of simple-design IR objectives with a hybrid element base. Method. The methodology included theoretical analyses, computer modeling, and optimization with the Zemax optical design software. Main results. The proposed methodology covers all stages of the layout design and calculation of the objective. It includes the selection of optical materials for all its elements, as well as recommendations for using the optical scheme obtained under the conditions of achromatization, apochromatization, or superchromatization as the initial scheme for subsequent optimization in Zemax. The methodology also provides guidelines for combining a GRIN lens with a diffractive optical element in the design and calculation of an ultra-high-speed dual-band gradient-diffractive objective. The effectiveness of the combined use of GRIN and diffractive elements and that of the proposed methodology are demonstrated through a calculation example of an ultra-high-aperture gradient-diffractive objective. Practical significance. The results of this study highlight the possibility of developing simple-design, high-aperture, dual-band IR objectives based on coaxial-laminated radial GRIN lenses.
- 1 February 2025
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 92 (2) , 126-131
Modeling and analysis of combined passive athermalization and achromatization in a two-component bifocal zoom objective for the infrared spectral range
Subject of study. This study considers a model of a two-component, three-lens bifocal zoom objective that enables the combination of passive athermalization and achromatization. Aim of study. The purpose of this study is to analyze the design parameters and optimal combinations of optical materials for the two-component bifocal zoom objective model that ensure both achromatization and athermalization. The analysis is based on the developed mathematical framework and methodology derived from it. Method. This study employs theoretical analysis and mathematical modeling using the equations of geometric optics. Main results. A mathematical framework and an associated methodology have been developed for the two-component bifocal zoom objective model. This framework enables the determination of the optimal combinations of optical and structural materials in the intercomponent air gap, as well as the optical powers of the lenses and distances between them. These combinations provide chromatic correction while simultaneously achieving passive athermalization through optical or mechanical means. Using the developed methodology, the available range of optical materials transparent in a broad infrared spectral region enables the design of high-aperture bifocal achromatic zoom objectives that are passively athermalized. The results demonstrate that thermal defocusing is possibly varied over a wide range without significantly affecting the difference in thermal defocusing corresponding to the two focal lengths of the bifocal zoom objective. Practical significance. The proposed methodology enables the determination of the initial design parameters of the optical layout in the early stages of designing a passively athermalized, bifocal achromatic zoom objective.
- 1 February 2025
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 92 (2) , 126-131
Modeling and analysis of combined passive athermalization and achromatization in a two-component bifocal zoom objective for the infrared spectral range
Subject of study. This study considers a model of a two-component, three-lens bifocal zoom objective that enables the combination of passive athermalization and achromatization. Aim of study. The purpose of this study is to analyze the design parameters and optimal combinations of optical materials for the two-component bifocal zoom objective model that ensure both achromatization and athermalization. The analysis is based on the developed mathematical framework and methodology derived from it. Method. This study employs theoretical analysis and mathematical modeling using the equations of geometric optics. Main results. A mathematical framework and an associated methodology have been developed for the two-component bifocal zoom objective model. This framework enables the determination of the optimal combinations of optical and structural materials in the intercomponent air gap, as well as the optical powers of the lenses and distances between them. These combinations provide chromatic correction while simultaneously achieving passive athermalization through optical or mechanical means. Using the developed methodology, the available range of optical materials transparent in a broad infrared spectral region enables the design of high-aperture bifocal achromatic zoom objectives that are passively athermalized. The results demonstrate that thermal defocusing is possibly varied over a wide range without significantly affecting the difference in thermal defocusing corresponding to the two focal lengths of the bifocal zoom objective. Practical significance. The proposed methodology enables the determination of the initial design parameters of the optical layout in the early stages of designing a passively athermalized, bifocal achromatic zoom objective.
- 1 November 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 91 (11) , 731-736
Ultrahigh-aperture dual-band gradient index-diffractive infrared objective
Subject of study. An optical system, designed using thin homogeneous lenses and an infinitely thin model of a thick, coaxial laminated radial-gradient-index lens (made from a composite gradient index material), was investigated. In addition, an ultrahigh-aperture dual-band gradient index-diffractive infrared triplet design was developed. Aim of study. The objective was to model and design an optical system incorporating a coaxial laminated radial-gradient-index lens and to demonstrate the potential of an ultrahigh-aperture dual-band infrared objective, consisting of two homogeneous lenses and one radial-gradient-index lens. Method. Theoretical analyses, computer modeling, and optimization were performed using the Zemax optical design program. Main results. The results demonstrate the feasibility of using the proposed infinitely thin model of a coaxial laminated radial-gradient-index lens (whose optical power and longitudinal chromatism are the same as those of its thick prototype), combined with thin homogeneous lenses separated by air gaps, as the initial design for the developed optical system. When the refractive index distribution of the gradient lens is known, the optimal combination of optical materials for the homogeneous lenses and the ratio of optical powers of all system elements may be determined by iteratively solving the corresponding equations for achromatization, apochromatization, and superchromatization. The resulting optical design, structural parameters, and optical characteristics of a calculated dual-band (3.5–5 µm and 8–11.9 µm) triplet, comprising two homogeneous lenses and one gradient lens, confirm the effectiveness of the proposed approach and high optical performance in objectives of this type. Practical significance. The results of this study are expected to promote the development of coaxial laminated radial-gradient-index lenses based on existing composite gradient index materials, facilitating the creation of high-performance, ultrahigh-aperture dual-band gradient index-diffractive infrared objectives for advanced optical applications.
- 1 November 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 91 (11) , 731-736
Ultrahigh-aperture dual-band gradient index-diffractive infrared objective
Subject of study. An optical system, designed using thin homogeneous lenses and an infinitely thin model of a thick, coaxial laminated radial-gradient-index lens (made from a composite gradient index material), was investigated. In addition, an ultrahigh-aperture dual-band gradient index-diffractive infrared triplet design was developed. Aim of study. The objective was to model and design an optical system incorporating a coaxial laminated radial-gradient-index lens and to demonstrate the potential of an ultrahigh-aperture dual-band infrared objective, consisting of two homogeneous lenses and one radial-gradient-index lens. Method. Theoretical analyses, computer modeling, and optimization were performed using the Zemax optical design program. Main results. The results demonstrate the feasibility of using the proposed infinitely thin model of a coaxial laminated radial-gradient-index lens (whose optical power and longitudinal chromatism are the same as those of its thick prototype), combined with thin homogeneous lenses separated by air gaps, as the initial design for the developed optical system. When the refractive index distribution of the gradient lens is known, the optimal combination of optical materials for the homogeneous lenses and the ratio of optical powers of all system elements may be determined by iteratively solving the corresponding equations for achromatization, apochromatization, and superchromatization. The resulting optical design, structural parameters, and optical characteristics of a calculated dual-band (3.5–5 µm and 8–11.9 µm) triplet, comprising two homogeneous lenses and one gradient lens, confirm the effectiveness of the proposed approach and high optical performance in objectives of this type. Practical significance. The results of this study are expected to promote the development of coaxial laminated radial-gradient-index lenses based on existing composite gradient index materials, facilitating the creation of high-performance, ultrahigh-aperture dual-band gradient index-diffractive infrared objectives for advanced optical applications.
- 1 October 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 91 (10) , 660-664
Modeling of a radial laminated GRIN lens: design and achievable performance of a dual-band infrared triplet with such a lens
Subject of study. This study examines the initial design of an optical system that incorporates thin homogeneous lenses, an infinitely thin model of a thick radial gradient-index lens, and a high-aperture dual-band infrared triplet developed based on this initial configuration. Aim of study. The objective of this study is to outline the computational stages involved in designing an optical system with a coaxial laminated radial gradient-index lens and to demonstrate the achievable performance of a high-aperture dual-band infrared objective composed of two homogeneous lenses and one thick radial gradient-index lens. Method. The study employs theoretical analysis, computer modeling, and optimization using Zemax optical design software. Main results. The proposed infinitely thin model of a coaxial laminated radial gradient-index lens, which maintains the same optical power and chromatic focal shift as its thick counterpart, serves as an effective starting point for optical system development. This model, combined with thin homogeneous lenses separated by air gaps, provides a strong foundation for optical system design. Given a known refractive-index distribution of the gradient-index lens, the optimal combination of optical materials for the homogeneous lenses, as well as the most effective ratio of optical powers for all system components, can be determined by solving the relevant system of equations for achromatization, apochromatization, or superachromatization. The effectiveness of the proposed approach and its ability to achieve high optical performance in a dual-band infrared triplet, consisting of two homogeneous lenses and one gradient-index lens, are demonstrated through the design of a system that incorporates a coaxially laminated radial gradient-index lens. The combination of new chalcogenide glasses was selected as the composite material for this lens to ensure the required refractive-index distribution, which was established during the design of a triplet for the medium-wavelength infrared range (3–5 µm). The layout, design parameters, and optical performance of the calculated dual-band (3.5–5 µm and 8–11.9 µm) triplet are presented. The triplet has a focal length of 40 mm, an f-number of 0.98, and a numerical aperture of 0.45 in the image space. Within an angular field of view of 19.5°, the triplet produced an image with a contrast of 0.54 at a spatial frequency of 30mm−1, while its distortion modulus remained below 0.4%. Practical significance. The results of this study confirm the feasibility of developing simple, high-aperture dual-band infrared objectives based on coaxially laminated radial gradient-index lenses.
- 1 October 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 91 (10) , 660-664
Modeling of a radial laminated GRIN lens: design and achievable performance of a dual-band infrared triplet with such a lens
Subject of study. This study examines the initial design of an optical system that incorporates thin homogeneous lenses, an infinitely thin model of a thick radial gradient-index lens, and a high-aperture dual-band infrared triplet developed based on this initial configuration. Aim of study. The objective of this study is to outline the computational stages involved in designing an optical system with a coaxial laminated radial gradient-index lens and to demonstrate the achievable performance of a high-aperture dual-band infrared objective composed of two homogeneous lenses and one thick radial gradient-index lens. Method. The study employs theoretical analysis, computer modeling, and optimization using Zemax optical design software. Main results. The proposed infinitely thin model of a coaxial laminated radial gradient-index lens, which maintains the same optical power and chromatic focal shift as its thick counterpart, serves as an effective starting point for optical system development. This model, combined with thin homogeneous lenses separated by air gaps, provides a strong foundation for optical system design. Given a known refractive-index distribution of the gradient-index lens, the optimal combination of optical materials for the homogeneous lenses, as well as the most effective ratio of optical powers for all system components, can be determined by solving the relevant system of equations for achromatization, apochromatization, or superachromatization. The effectiveness of the proposed approach and its ability to achieve high optical performance in a dual-band infrared triplet, consisting of two homogeneous lenses and one gradient-index lens, are demonstrated through the design of a system that incorporates a coaxially laminated radial gradient-index lens. The combination of new chalcogenide glasses was selected as the composite material for this lens to ensure the required refractive-index distribution, which was established during the design of a triplet for the medium-wavelength infrared range (3–5 µm). The layout, design parameters, and optical performance of the calculated dual-band (3.5–5 µm and 8–11.9 µm) triplet are presented. The triplet has a focal length of 40 mm, an f-number of 0.98, and a numerical aperture of 0.45 in the image space. Within an angular field of view of 19.5°, the triplet produced an image with a contrast of 0.54 at a spatial frequency of 30mm−1, while its distortion modulus remained below 0.4%. Practical significance. The results of this study confirm the feasibility of developing simple, high-aperture dual-band infrared objectives based on coaxially laminated radial gradient-index lenses.
- Open Access
- 1 January 2016
- Published by Samara National Research University in Computer Optics
- Vol. 40 (1) , 51-56
Thermo-optical aberrations of radially symmetric diffractive optical elements
Analytical relations that define the temperature dependence of the third-order aberration coefficients for a radiaplly symmetric diffractive optical element were derived. Also, a condition for eliminating thermal defocusing in a diffractive-refractive singlet was obtained. Possibilities of correcting aberrations in a wide temperature range for a single diffractive optical element and diffractive-refractive singlet were analyzed.
- 1 January 2016
- Published by Samara National Research University in Computer Optics
- Vol. 40 (1) , 51-56
Open AccessThermo-optical aberrations of radially symmetric diffractive optical elements
Analytical relations that define the temperature dependence of the third-order aberration coefficients for a radiaplly symmetric diffractive optical element were derived. Also, a condition for eliminating thermal defocusing in a diffractive-refractive singlet was obtained. Possibilities of correcting aberrations in a wide temperature range for a single diffractive optical element and diffractive-refractive singlet were analyzed.
- 1 January 2015
- Published by Springer Nature in Radiophysics and Quantum Electronics
- Vol. 57 (8-9) , 610-618
Diffractive Elements in the Optical System: Successes, Challenges, and Solutions
- 1 January 2015
- Published by Springer Nature in Radiophysics and Quantum Electronics
- Vol. 57 (8-9) , 610-618
Diffractive Elements in the Optical System: Successes, Challenges, and Solutions
- 25 October 2012
- Published by Pleiades Publishing Ltd in Optics and Spectroscopy
- Vol. 113 (4) , 425-430
The efficiency of relief-phase diffractive elements at a small number of Fresnel zones
A technique and investigation results are presented on the effect of the number of Fresnel zones on the diffraction efficiency and quality of the wave front formed by a diffractive optical element. Equations are presented for the microstructure reliefs of diffractive optical elements making (regardless of the number of Fresnel zones) the wavefront shape coinciding with the calculated one and ensuring 100% diffraction efficiency at a single wavelength and, in the case of two-layer structures, almost 100% diffraction efficiency in a wide spectral range.
- 25 October 2012
- Published by Pleiades Publishing Ltd in Optics and Spectroscopy
- Vol. 113 (4) , 425-430
The efficiency of relief-phase diffractive elements at a small number of Fresnel zones
A technique and investigation results are presented on the effect of the number of Fresnel zones on the diffraction efficiency and quality of the wave front formed by a diffractive optical element. Equations are presented for the microstructure reliefs of diffractive optical elements making (regardless of the number of Fresnel zones) the wavefront shape coinciding with the calculated one and ensuring 100% diffraction efficiency at a single wavelength and, in the case of two-layer structures, almost 100% diffraction efficiency in a wide spectral range.
- 4 August 2010
- Published by Optica Publishing Group in Applied Optics
- Vol. 49 (23) , 4379-4384
Design of achromatic and apochromatic plastic micro-objectives
The possibility and the efficiency of using a single diffractive lens to achromatize and apochromatize micro-objectives with plastic lenses are shown. In addition, recommendations are given on assembling the starting configurations of the objectives and calculating the design parameters required for subsequent optimization. It is also shown that achievable optical performance of achromatic and apochromatic micro-objectives with plastic lenses satisfy the qualifying standards for cell-phone objectives and closed-circuit television (CCTV) cameras.
- 4 August 2010
- Published by Optica Publishing Group in Applied Optics
- Vol. 49 (23) , 4379-4384
Design of achromatic and apochromatic plastic micro-objectives
The possibility and the efficiency of using a single diffractive lens to achromatize and apochromatize micro-objectives with plastic lenses are shown. In addition, recommendations are given on assembling the starting configurations of the objectives and calculating the design parameters required for subsequent optimization. It is also shown that achievable optical performance of achromatic and apochromatic micro-objectives with plastic lenses satisfy the qualifying standards for cell-phone objectives and closed-circuit television (CCTV) cameras.