Evgeniy G. Ezhov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Evgeniy G. Ezhov has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Il’yA A. Levin
S. A. Zverev Krasnogorsk Plant
4 shared publications - Grigoriy Isaevitch Greisukh
Penza State University of Architecture and Construction
3 shared publications Grigory I. Greĭsukh
Penza State University of Architecture and Construction
1 shared publication- Victor Anatolyevich Danilov
Scientific and Technological Center of Unique Instrumentation, Russian Academy of Sciences, Moscow, Russia
1 shared publication - А.и. Антонов1 shared publication
Б.а. Усилевич
1 shared publication
Latest Publications
- 1 March 2026
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 93 (3)
Basic paraxial characteristics of gradient-index optical elements
Subject of study. The paraxial characteristics of a radial-gradient-index plane-parallel plate and lens are investigated. Purpose of study. The purpose of this study is to derive expressions that are both convenient for practical application and sufficiently accurate for determining the paraxial characteristics of radial-gradient-index optical elements. Method. The study is based on theoretical analysis supported by numerical calculations. Main results. Formulas are derived for calculating the optical power, front and back focal lengths, and positions of the front and back principal planes of radial-gradient-index plane-parallel plates and lenses. The analysis demonstrates that these formulas are substantially simplified when the parameter K, which includes the base refractive index, the element thickness, and the first radial gradient-index coefficient, is much smaller than unity. The relative errors in the calculated paraxial characteristics do not exceed 1.12% for K K Practical significance. The proposed formulae make it possible to obtain reliable values of the paraxial and dispersion characteristics of optical systems containing gradient-index elements by supplementing conventional calculation procedures with only a small number of simple algebraic expressions.
- 1 March 2026
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 93 (3)
Basic paraxial characteristics of gradient-index optical elements
Subject of study. The paraxial characteristics of a radial-gradient-index plane-parallel plate and lens are investigated. Purpose of study. The purpose of this study is to derive expressions that are both convenient for practical application and sufficiently accurate for determining the paraxial characteristics of radial-gradient-index optical elements. Method. The study is based on theoretical analysis supported by numerical calculations. Main results. Formulas are derived for calculating the optical power, front and back focal lengths, and positions of the front and back principal planes of radial-gradient-index plane-parallel plates and lenses. The analysis demonstrates that these formulas are substantially simplified when the parameter K, which includes the base refractive index, the element thickness, and the first radial gradient-index coefficient, is much smaller than unity. The relative errors in the calculated paraxial characteristics do not exceed 1.12% for K K Practical significance. The proposed formulae make it possible to obtain reliable values of the paraxial and dispersion characteristics of optical systems containing gradient-index elements by supplementing conventional calculation procedures with only a small number of simple algebraic expressions.
- 1 March 2025
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 92 (3) , 183-188
Methodology for the design of infrared objectives with homogeneous, gradient-index, and diffractive elements
Subject of study. This study was focused on simple-design infrared (IR) objectives, including either a single coaxial-laminated radial gradient-index (GRIN) lens or a combination of a GRIN lens and a diffractive optical element, in addition to homogeneous lenses. Aim of study. The aim of this study was to develop a methodology for the layout design and calculation of simple-design IR objectives with a hybrid element base. Method. The methodology included theoretical analyses, computer modeling, and optimization with the Zemax optical design software. Main results. The proposed methodology covers all stages of the layout design and calculation of the objective. It includes the selection of optical materials for all its elements, as well as recommendations for using the optical scheme obtained under the conditions of achromatization, apochromatization, or superchromatization as the initial scheme for subsequent optimization in Zemax. The methodology also provides guidelines for combining a GRIN lens with a diffractive optical element in the design and calculation of an ultra-high-speed dual-band gradient-diffractive objective. The effectiveness of the combined use of GRIN and diffractive elements and that of the proposed methodology are demonstrated through a calculation example of an ultra-high-aperture gradient-diffractive objective. Practical significance. The results of this study highlight the possibility of developing simple-design, high-aperture, dual-band IR objectives based on coaxial-laminated radial GRIN lenses.
- 1 March 2025
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 92 (3) , 183-188
Methodology for the design of infrared objectives with homogeneous, gradient-index, and diffractive elements
Subject of study. This study was focused on simple-design infrared (IR) objectives, including either a single coaxial-laminated radial gradient-index (GRIN) lens or a combination of a GRIN lens and a diffractive optical element, in addition to homogeneous lenses. Aim of study. The aim of this study was to develop a methodology for the layout design and calculation of simple-design IR objectives with a hybrid element base. Method. The methodology included theoretical analyses, computer modeling, and optimization with the Zemax optical design software. Main results. The proposed methodology covers all stages of the layout design and calculation of the objective. It includes the selection of optical materials for all its elements, as well as recommendations for using the optical scheme obtained under the conditions of achromatization, apochromatization, or superchromatization as the initial scheme for subsequent optimization in Zemax. The methodology also provides guidelines for combining a GRIN lens with a diffractive optical element in the design and calculation of an ultra-high-speed dual-band gradient-diffractive objective. The effectiveness of the combined use of GRIN and diffractive elements and that of the proposed methodology are demonstrated through a calculation example of an ultra-high-aperture gradient-diffractive objective. Practical significance. The results of this study highlight the possibility of developing simple-design, high-aperture, dual-band IR objectives based on coaxial-laminated radial GRIN lenses.
- 1 November 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 91 (11) , 731-736
Ultrahigh-aperture dual-band gradient index-diffractive infrared objective
Subject of study. An optical system, designed using thin homogeneous lenses and an infinitely thin model of a thick, coaxial laminated radial-gradient-index lens (made from a composite gradient index material), was investigated. In addition, an ultrahigh-aperture dual-band gradient index-diffractive infrared triplet design was developed. Aim of study. The objective was to model and design an optical system incorporating a coaxial laminated radial-gradient-index lens and to demonstrate the potential of an ultrahigh-aperture dual-band infrared objective, consisting of two homogeneous lenses and one radial-gradient-index lens. Method. Theoretical analyses, computer modeling, and optimization were performed using the Zemax optical design program. Main results. The results demonstrate the feasibility of using the proposed infinitely thin model of a coaxial laminated radial-gradient-index lens (whose optical power and longitudinal chromatism are the same as those of its thick prototype), combined with thin homogeneous lenses separated by air gaps, as the initial design for the developed optical system. When the refractive index distribution of the gradient lens is known, the optimal combination of optical materials for the homogeneous lenses and the ratio of optical powers of all system elements may be determined by iteratively solving the corresponding equations for achromatization, apochromatization, and superchromatization. The resulting optical design, structural parameters, and optical characteristics of a calculated dual-band (3.5–5 µm and 8–11.9 µm) triplet, comprising two homogeneous lenses and one gradient lens, confirm the effectiveness of the proposed approach and high optical performance in objectives of this type. Practical significance. The results of this study are expected to promote the development of coaxial laminated radial-gradient-index lenses based on existing composite gradient index materials, facilitating the creation of high-performance, ultrahigh-aperture dual-band gradient index-diffractive infrared objectives for advanced optical applications.
- 1 November 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 91 (11) , 731-736
Ultrahigh-aperture dual-band gradient index-diffractive infrared objective
Subject of study. An optical system, designed using thin homogeneous lenses and an infinitely thin model of a thick, coaxial laminated radial-gradient-index lens (made from a composite gradient index material), was investigated. In addition, an ultrahigh-aperture dual-band gradient index-diffractive infrared triplet design was developed. Aim of study. The objective was to model and design an optical system incorporating a coaxial laminated radial-gradient-index lens and to demonstrate the potential of an ultrahigh-aperture dual-band infrared objective, consisting of two homogeneous lenses and one radial-gradient-index lens. Method. Theoretical analyses, computer modeling, and optimization were performed using the Zemax optical design program. Main results. The results demonstrate the feasibility of using the proposed infinitely thin model of a coaxial laminated radial-gradient-index lens (whose optical power and longitudinal chromatism are the same as those of its thick prototype), combined with thin homogeneous lenses separated by air gaps, as the initial design for the developed optical system. When the refractive index distribution of the gradient lens is known, the optimal combination of optical materials for the homogeneous lenses and the ratio of optical powers of all system elements may be determined by iteratively solving the corresponding equations for achromatization, apochromatization, and superchromatization. The resulting optical design, structural parameters, and optical characteristics of a calculated dual-band (3.5–5 µm and 8–11.9 µm) triplet, comprising two homogeneous lenses and one gradient lens, confirm the effectiveness of the proposed approach and high optical performance in objectives of this type. Practical significance. The results of this study are expected to promote the development of coaxial laminated radial-gradient-index lenses based on existing composite gradient index materials, facilitating the creation of high-performance, ultrahigh-aperture dual-band gradient index-diffractive infrared objectives for advanced optical applications.
- 1 October 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 91 (10) , 660-664
Modeling of a radial laminated GRIN lens: design and achievable performance of a dual-band infrared triplet with such a lens
Subject of study. This study examines the initial design of an optical system that incorporates thin homogeneous lenses, an infinitely thin model of a thick radial gradient-index lens, and a high-aperture dual-band infrared triplet developed based on this initial configuration. Aim of study. The objective of this study is to outline the computational stages involved in designing an optical system with a coaxial laminated radial gradient-index lens and to demonstrate the achievable performance of a high-aperture dual-band infrared objective composed of two homogeneous lenses and one thick radial gradient-index lens. Method. The study employs theoretical analysis, computer modeling, and optimization using Zemax optical design software. Main results. The proposed infinitely thin model of a coaxial laminated radial gradient-index lens, which maintains the same optical power and chromatic focal shift as its thick counterpart, serves as an effective starting point for optical system development. This model, combined with thin homogeneous lenses separated by air gaps, provides a strong foundation for optical system design. Given a known refractive-index distribution of the gradient-index lens, the optimal combination of optical materials for the homogeneous lenses, as well as the most effective ratio of optical powers for all system components, can be determined by solving the relevant system of equations for achromatization, apochromatization, or superachromatization. The effectiveness of the proposed approach and its ability to achieve high optical performance in a dual-band infrared triplet, consisting of two homogeneous lenses and one gradient-index lens, are demonstrated through the design of a system that incorporates a coaxially laminated radial gradient-index lens. The combination of new chalcogenide glasses was selected as the composite material for this lens to ensure the required refractive-index distribution, which was established during the design of a triplet for the medium-wavelength infrared range (3–5 µm). The layout, design parameters, and optical performance of the calculated dual-band (3.5–5 µm and 8–11.9 µm) triplet are presented. The triplet has a focal length of 40 mm, an f-number of 0.98, and a numerical aperture of 0.45 in the image space. Within an angular field of view of 19.5°, the triplet produced an image with a contrast of 0.54 at a spatial frequency of 30mm−1, while its distortion modulus remained below 0.4%. Practical significance. The results of this study confirm the feasibility of developing simple, high-aperture dual-band infrared objectives based on coaxially laminated radial gradient-index lenses.
- 1 October 2024
- Published by Optica Publishing Group in Journal of Optical Technology
- Vol. 91 (10) , 660-664
Modeling of a radial laminated GRIN lens: design and achievable performance of a dual-band infrared triplet with such a lens
Subject of study. This study examines the initial design of an optical system that incorporates thin homogeneous lenses, an infinitely thin model of a thick radial gradient-index lens, and a high-aperture dual-band infrared triplet developed based on this initial configuration. Aim of study. The objective of this study is to outline the computational stages involved in designing an optical system with a coaxial laminated radial gradient-index lens and to demonstrate the achievable performance of a high-aperture dual-band infrared objective composed of two homogeneous lenses and one thick radial gradient-index lens. Method. The study employs theoretical analysis, computer modeling, and optimization using Zemax optical design software. Main results. The proposed infinitely thin model of a coaxial laminated radial gradient-index lens, which maintains the same optical power and chromatic focal shift as its thick counterpart, serves as an effective starting point for optical system development. This model, combined with thin homogeneous lenses separated by air gaps, provides a strong foundation for optical system design. Given a known refractive-index distribution of the gradient-index lens, the optimal combination of optical materials for the homogeneous lenses, as well as the most effective ratio of optical powers for all system components, can be determined by solving the relevant system of equations for achromatization, apochromatization, or superachromatization. The effectiveness of the proposed approach and its ability to achieve high optical performance in a dual-band infrared triplet, consisting of two homogeneous lenses and one gradient-index lens, are demonstrated through the design of a system that incorporates a coaxially laminated radial gradient-index lens. The combination of new chalcogenide glasses was selected as the composite material for this lens to ensure the required refractive-index distribution, which was established during the design of a triplet for the medium-wavelength infrared range (3–5 µm). The layout, design parameters, and optical performance of the calculated dual-band (3.5–5 µm and 8–11.9 µm) triplet are presented. The triplet has a focal length of 40 mm, an f-number of 0.98, and a numerical aperture of 0.45 in the image space. Within an angular field of view of 19.5°, the triplet produced an image with a contrast of 0.54 at a spatial frequency of 30mm−1, while its distortion modulus remained below 0.4%. Practical significance. The results of this study confirm the feasibility of developing simple, high-aperture dual-band infrared objectives based on coaxially laminated radial gradient-index lenses.
- 8 May 2020
- Published by Technosphera JSC in PHOTONICS Russia
- Vol. 14 (2) , 160-169
ДИФРАКЦИОННЫЕ ЭЛЕМЕНТЫ В ОПТИЧЕСКИХ СИСТЕМАХ СРЕДНЕГО И ДВОЙНОГО ИК-ДИАПАЗОНА
Показано, что размещение дифракционной микроструктуры на плоской поверхности одной из рефракционных линз высокоапертурного триплета позволяет одновременно выполнить условия коррекции как хроматических, так и монохроматических аберраций и получить объективы, рассчитанные на средний и двойной ИК- диапазоны, имеющие достаточно высокие оптические характеристики.
- 8 May 2020
- Published by Technosphera JSC in PHOTONICS Russia
- Vol. 14 (2) , 160-169
ДИФРАКЦИОННЫЕ ЭЛЕМЕНТЫ В ОПТИЧЕСКИХ СИСТЕМАХ СРЕДНЕГО И ДВОЙНОГО ИК-ДИАПАЗОНА
Показано, что размещение дифракционной микроструктуры на плоской поверхности одной из рефракционных линз высокоапертурного триплета позволяет одновременно выполнить условия коррекции как хроматических, так и монохроматических аберраций и получить объективы, рассчитанные на средний и двойной ИК- диапазоны, имеющие достаточно высокие оптические характеристики.