RKRyan J. Klapperich

Ryan J. Klapperich

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ryan J. Klapperich has a total of 79 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Roughrider Carbon Storage Hub (Final Report)

    by Wesly Peck, Kyle Glazewski, Carrie Christianson, Matthew Burton-Kelly, Michael Warmack, Ryan Klapperich, Teresa Bonev

    The Roughrider Carbon Storage Hub was a 2-year project (October 2023 – September 2025) conducted by the Energy & Environmental Research Center (EERC) focused on advancing the feasibility of a commercial-scale carbon dioxide (CO2) geologic storage hub in McKenzie County, North Dakota. The project’s objective was to investigate the potential that stacked storage complexes (multiple deep saline formations) can safely and economically store at least 50 million tonnes of CO2 within 30 years. The captured CO2 would be sourced from industrial emitters including project partner ONEOK, Inc.’s gas-processing plants and a planned gas-to-liquids facility. Drilling of the Roughrider 1 stratigraphic test well (14,979-ft total depth) was completed in November 2024. The wellbore intersected four candidate storage formations: Inyan Kara, Broom Creek, Mission Canyon, and Black Island–Deadwood. Operational challenges, including a stuck drill string, were resolved without long-term impact. A comprehensive logging and coring program was conducted, followed by successful well abandonment and site reclamation. Over 660 ft of 4-in. whole core was retrieved. Core plug samples were processed and analyzed for petrophysical and geochemical properties. Results confirmed promising porosity and permeability in the Inyan Kara and Broom Creek Formations and removal of the Mission Canyon and Black Island–Deadwood horizons from further investigation. Data derived from the logging and coring program were used to improve initial geologic models built from legacy data. CO2 injection simulations showed that the Inyan Kara alone can feasibly store the target mass of CO2. Because of subtle differences in geologic structure and porosity trends between the formations, a stacked storage scenario using the Broom Creek and Inyan Kara Formations resulted in a larger overall plume area than using the Inyan Kara alone. Preliminary CO2 pipeline routes from the industrial sources were mapped utilizing existing rights of way and evaluated for capacity and cost using U.S. Department of Energy Office of Fossil Energy and Carbon Management/National Energy Technology Laboratory models and U.S. Environmental Protection Agency emissions data. Integrating capture, transport, and storage cost estimates with policy incentives (e.g., 45Q credits) provided a total cost-per-ton analysis. Results indicate that the small scale of the volumes to be transported over the cumulative large distances does not support the project’s financial viability. However, the groundwork laid during this project from geological, regulatory, and social perspectives positions the Roughrider hub site as a promising candidate for commercial carbon storage in North Dakota, especially if the economy of scale is introduced for CO2 transportation to the hub site.

  • Open Access

    Application of Electromagnetic Methods for Reservoir Monitoring with Emphasis on Carbon Capture, Utilization, and Storage

    by César Barajas-Olalde, Donald C. Adams, Ana Curcio, Sofia Davydycheva, Ryan J. Klapperich, Yardenia Martinez, Andri Y. Paembonan, Wesley D. Peck, Kurt Strack, Pantelis Soupios

    The Controlled-Source ElectroMagnetic (CSEM) method provides crucial information about reservoir fluids and their spatial distribution. Carbon dioxide (CO2) storage, enhanced oil recovery (EOR), geothermal exploration, and lithium exploration are ideal applications for the CSEM method. The versatility of CSEM permits its customization to specific reservoir objectives by selecting the appropriate components of a multi-component system. To effectively tailor the CSEM approach, it is essential to determine whether the primary target reservoir is resistive or conductive. This task is relatively straightforward in CO2 monitoring, where the injected fluid is resistive. However, for scenarios involving brine-saturated (water-wet) or oil-wet (carbon capture, utilization, and storage—CCUS) reservoirs, consideration must also be given to conductive reservoir components. The optimization of data acquisition before the survey involves analyzing target parameters and the sensitivity of multi-component CSEM. This optimization process typically includes on-site noise measurements and 3D anisotropic modeling. Based on our experience, subsequent surveys tend to proceed smoothly, yielding robust measurements that align with scientific objectives. Other critical aspects to be considered are using magnetotelluric (MT) measurements to define the overall background resistivities and integrating real-time quality assurance during data acquisition with 3D modeling. This integration allows the fine tuning of acquisition parameters such as acquisition time and necessary repeats. As a result, data can be examined in real-time to assess subsurface information content while the acquisition is ongoing. Consequently, high-quality data sets are usually obtained for subsequent processing and initial interpretation with minimal user intervention. The implementation of sensitivity analysis during the inversion process plays a pivotal role in ensuring that the acquired data accurately respond to the target reservoirs’ expected depth range. To elucidate these concepts, we present an illustrative example from a CO2 storage site in North Dakota, USA, wherein the long-offset transient electromagnetic method (LOTEM), a variation of the CSEM method, and the MT method were utilized. This example showcases how surface measurements attain appropriately upscaled log-scale sensitivity. Furthermore, the sensitivity of the CSEM and MT methods was examined in other case histories, where the target reservoirs exhibited conductive properties, such as those encountered in enhanced oil recovery (EOR), geothermal, and lithium exploration applications. The same equipment specifications were utilized for CSEM and MT surveys across all case studies.


  • Open Access

    2D Seismic Surveys as an Alternative for CO2 Monitoring in the North Dakota CarbonSAFE Project

    by USDOE Office of Fossil Energy and Carbon Management (FECM), César Barajas-Olalde, Donald C. Adams, Hansel Gonzalez, Mengmeng Zhang, Pablo Benitez, Ryan J. Klapperich, Wesley D. Peck, Panos Doulgeris

    Conference presentation for International Meeting for Applied Geoscience & Energy (IMAGE), Houston, TX, August 28 – September 1, 2023. As part of the North Dakota CarbonSAFE project, seismic, controlled-source electromagnetic, and microgravity baseline monitoring surveys were collected to assess the safe, permanent, commercial-scale geologic storage of CO2 generated by the Milton R. Young coal-fired power plant. Data from five 2D seismic lines were assessed as an alternative to 3D seismic for CO2 monitoring. 2D and 3D surveys were compared using wave equation-based (WEB)-AVO inversion. The encouraging WEB-AVO results demonstrated that 2D surveys could be included in CO2 monitoring programs as a cost-effective method.

  • Open Access

    On the Feasibility of Geophysical Methods for CO2 Monitoring in the North Dakota CarbonSAFE Project

    by USDOE Office of Fossil Energy and Carbon Management (FECM), César Barajas-Olalde, Donald C. Adams, Kurt M. Strack, Sonya Davydycheva, Yardenia Martínez, Kris MacLennan, Ryan J. Klapperich, Wesley D. Peck, Shannon Mikula

    Conference presentation at American Institute of Chemical Engineers (AIChE) Annual Meeting, Phoenix, AZ, November 13–18, 2022. An analysis of rock physics crossplots and diagnostic models suggests that the baseline seismic data may be sensitive to changes in lithology and porosity of the Broom Creek Formation and that these changes may be detectable by prestack seismic inversion.

  • Open Access

    Quality Analysis of Baseline Time-Lapse CSEM Data CarbonSAFE Project, North Dakota

    by USDOE Office of Fossil Energy and Carbon Management (FECM), César Barajas-Olalde, Kris MacLennan, Kurt M. Strack, Sonya Davydycheva, Tilman Hanstein, Yardenia Martinez, Donald C. Adams, Ryan J. Klapperich, Wesley D. Peck, et al.

    Conference presentation at International Meeting for Applied Geoscience & Energy (IMAGE), Houston, TX, August 28 – September 2, 2022. When a series of time-lapse CSEM surveys are designed to measure the often-small variations in signal seen in CCUS projects, the primary concern must be collecting the highest-quality data and reducing as much noise as possible. This includes optimization during planning and feasibility, careful and consistent quality checks in the field, and transparent and repeatable postprocessing steps. We apply this practice to a baseline (prior to CO2 injection) CSEM data set collected for a time-lapse survey in Center, North Dakota, as a part of the North Dakota CarbonSAFE project, and describe the rigorous quality control and assessment methods used, including noise removal and data validation with 1D and 3D inversion to tie results to borehole logs. The final result is an accurate and representative CSEM data set and information that stakeholders can use to inform future time-lapse survey costs and designs.

  • Open Access

    North Dakota CarbonSAFE Baseline Microgravity Survey, Lessons Learned

    by USDOE Office of Fossil Energy and Carbon Management (FECM), Donald C. Adams, César Barajas-Olalde, Kris MacLennan, Chioma Onwumelu, Ryan J. Klapperich, Wesley D. Peck, Shannon Mikula

    Conference presentation at American Geophysical Union (AGU) Fall Meeting, New Orleans, LA and virtual, December 13–17, 2021. The team conducted a baseline microgravity survey near Minnkota Power Cooperative’s Milton R. Young power station, south of Center, North Dakota, as a part of the North Dakota CarbonSAFE (Carbon Storage Assurance Facility Enterprise) geophysical activities. The goal of this survey was to assess whether microgravity would be an appropriate technique to monitor CO2 stored at this site.

  • Open Access

    Using Controlled-Source Electromagnetic (CSEM) for CO2 Storage Monitoring in the North Dakota CarbonSAFE Project

    by USDOE Office of Fossil Energy and Carbon Management (FECM), César Barajas-Olalde, Sofia Davydycheva, Tilman Hanstein, Daniel A. Laudal, Yardenia Martínez, Kris MacLennan, Shannon Mikula, Donald C. Adams, Ryan J. Klapperich, et al.

    Conference presentation for International Meeting for Applied Geophysics & Energy (IMAGE), September 26 – October 1, 2021, Denver, CO. Geophysical methods are key for characterizing the geologic formations to store CO2 and monitor the injected CO2 over time to ensure containment. In the integrated multimeasurement geophysical approach considered for this project, it is expected that the controlled-source electromagnetic (CSEM) method is a strong contributor to mapping the CO2 movement. A feasibility study of the CSEM method, including 1D and 3D modeling and a field noise test, was conducted to determine its effectiveness in monitoring CO2 in the Broom Creek and Deadwood Formations. The study results demonstrate that the CSEM method can be used for CO2 storage monitoring in the study area.

  • Best Practices Manual: Monitoring for CO2 Storage

    by Kyle A. Glazewski, Ted R. Aulich, Neil Wildgust, David V. Nakles, Nicholas A. Azzolina, John A. Hamling, Shaughn A. Burnison, Amanda J. Livers-Douglas, Wesley D. Peck, Ryan J. Klapperich, et al.

    This best practices manual (BPM) describes lessons learned and best practices for monitoring carbon dioxide (CO2) geologic storage (herein “storage”) projects derived from extensive Plains CO2 Reduction (PCOR) Partnership regional characterization and field demonstration experience acquired via activities conducted throughout the PCOR Partnership region. This BPM is intended to 1) provide guidance to project developers, regulators, and other stakeholders in evaluating and developing CO2 storage opportunities and 2) serve as a reference for CO2 storage technical specialists.