Yingzheng Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yingzheng Liu has a total of 249 co-authors. Here are the top co-authors by number of shared publications:
- Chuangxin He
Shanghai Jiao Tong University
46 shared publications - Peng Wang
Shanghai Jiao Tong University
46 shared publications - Di Peng
Shanghai Jiao Tong University
35 shared publications - Hyung Jin Sung
Korea Advanced Institute of Science and Technology
26 shared publications - Wenwu Zhou
Shanghai Jiao Tong University
26 shared publications Di Peng
21 shared publications
Latest Publications
- 20 October 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (42) , 425301
Particle-free velocimetry technique via inhomogeneous PLIF scalar image field and wavelet-based optical flow algorithm
The focuses on exploring and assessing a particle-free velocimetry strategy to extract high-resolution velocity fields directly from inhomogeneous planar laser-induced fluorescence (PLIF) scalar-field images using a wavelet-based optical flow velocimetry (wOFV) algorithm. This strategy was validated in a jet under a Reynolds number of 10 000 by three experiments: Case 1 for no injection; Case 2 for injection of distilled water and Case 3 for injection of the RhB solution (both injection rate of 2.0 ml min −1 are 0.021% relative to the main jet flow rate of 9.425 l min −1 ), and a set of high-speed camera captures particle images in Case 3 in synchrony to validate the velocity field. The results indicate that the instantaneous velocity fields by wOFV from PLIF images are also consistent with the particle-image-based particle image velocimetry (PIV) reference results, and the main flow features in the jet core and shear layer can be successfully reconstructed, with the normalized scalar‐intensity gradient should preferably exceed 0.02. In the jet core and shear layer, the mean root mean square error is only 0.043 and 0.065 u / U 0 ; and the mean relative uncertainty of mean flow, Reynolds normal stresses, and shear stresses are no more than 0.38%, 4.20%, and 9.93%. These uncertainty levels are comparable to those of conventional PIV datasets. The statistical characteristics indicate that the injection of RhB has virtually no effect on the flow field, the mean absolute deviation does not exceed 0.01 u / U 0 in the jet core and 0.02 u / U 0 in the shear layer, and the time-averaged flow fields maintain a high degree of consistency. The spectral proper orthogonal decomposition results indicate that the PLIF-based wOFV method can reproduce large-scale coherent vortical structures as particle-based PIV techniques. All final results demonstrate that high-resolution velocity fields can be obtained from inhomogeneous, sparsely concentrated PLIF images, providing a highly precise measurement tool for scenarios involving particle constraints, offering immense potential for application.
- 20 October 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (42) , 425301
Particle-free velocimetry technique via inhomogeneous PLIF scalar image field and wavelet-based optical flow algorithm
The focuses on exploring and assessing a particle-free velocimetry strategy to extract high-resolution velocity fields directly from inhomogeneous planar laser-induced fluorescence (PLIF) scalar-field images using a wavelet-based optical flow velocimetry (wOFV) algorithm. This strategy was validated in a jet under a Reynolds number of 10 000 by three experiments: Case 1 for no injection; Case 2 for injection of distilled water and Case 3 for injection of the RhB solution (both injection rate of 2.0 ml min −1 are 0.021% relative to the main jet flow rate of 9.425 l min −1 ), and a set of high-speed camera captures particle images in Case 3 in synchrony to validate the velocity field. The results indicate that the instantaneous velocity fields by wOFV from PLIF images are also consistent with the particle-image-based particle image velocimetry (PIV) reference results, and the main flow features in the jet core and shear layer can be successfully reconstructed, with the normalized scalar‐intensity gradient should preferably exceed 0.02. In the jet core and shear layer, the mean root mean square error is only 0.043 and 0.065 u / U 0 ; and the mean relative uncertainty of mean flow, Reynolds normal stresses, and shear stresses are no more than 0.38%, 4.20%, and 9.93%. These uncertainty levels are comparable to those of conventional PIV datasets. The statistical characteristics indicate that the injection of RhB has virtually no effect on the flow field, the mean absolute deviation does not exceed 0.01 u / U 0 in the jet core and 0.02 u / U 0 in the shear layer, and the time-averaged flow fields maintain a high degree of consistency. The spectral proper orthogonal decomposition results indicate that the PLIF-based wOFV method can reproduce large-scale coherent vortical structures as particle-based PIV techniques. All final results demonstrate that high-resolution velocity fields can be obtained from inhomogeneous, sparsely concentrated PLIF images, providing a highly precise measurement tool for scenarios involving particle constraints, offering immense potential for application.
- 14 October 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (41) , 416003
Calibration errors and their impact on measurement accuracy in lifetime based phosphor thermometry
This study investigates the error propagation in the calibration stage of lifetime based phosphor thermometry and establishes a quantitative framework linking calibration errors to final temperature uncertainty. The results demonstrate that the primary error source originates not from the lifetime measurement, but from composite calibration errors, contributing over 99% of the total uncertainty. Through derivation of error evaluation equations for linear, quadratic, and cubic calibration curves, the dominant role of the covariance coefficient and residuals in uncertainty propagation is elucidated. Experimental validation shows only 3.5% difference in total uncertainty between high and low noise conditions, confirming that environmental noise has minimal impact compared to inherent systematic bias in calibration models. This study ultimately demonstrates that substantial improvements in accuracy must follow a clearly defined optimization hierarchy: first, the measurement accuracy of the reference thermocouple must be ensured; on this basis, the residual term can then be reduced by narrowing the calibration range, selecting an appropriate calibration equation, and/or increasing the density of calibration points.
- 14 October 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (41) , 416003
Calibration errors and their impact on measurement accuracy in lifetime based phosphor thermometry
This study investigates the error propagation in the calibration stage of lifetime based phosphor thermometry and establishes a quantitative framework linking calibration errors to final temperature uncertainty. The results demonstrate that the primary error source originates not from the lifetime measurement, but from composite calibration errors, contributing over 99% of the total uncertainty. Through derivation of error evaluation equations for linear, quadratic, and cubic calibration curves, the dominant role of the covariance coefficient and residuals in uncertainty propagation is elucidated. Experimental validation shows only 3.5% difference in total uncertainty between high and low noise conditions, confirming that environmental noise has minimal impact compared to inherent systematic bias in calibration models. This study ultimately demonstrates that substantial improvements in accuracy must follow a clearly defined optimization hierarchy: first, the measurement accuracy of the reference thermocouple must be ensured; on this basis, the residual term can then be reduced by narrowing the calibration range, selecting an appropriate calibration equation, and/or increasing the density of calibration points.
- 1 October 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (10)
Data assimilation of the near-field dynamics of the hydrofoil tip vortex
Tip vortex cavitation is a critical issue in marine hydrodynamics, yet its prediction is hampered by challenges in capturing the complex, unsteady flow in the hydrofoil near-field. Conventional experimental and numerical methods often struggle to resolve the unsteady structures and the physically consistent pressure–velocity coupling associated with vortex instability. This study applies an established continuous-adjoint data-assimilation (DA) framework to a new hydrofoil-tip-vortex application by assimilating time-resolved tomographic particle image velocimetry measurements into the spatially filtered Navier–Stokes equations. The DA step reconstructs a physics-constrained three-dimensional velocity field; pressure is subsequently estimated from that velocity field by solving a pressure Poisson equation. The flow is examined at angles of attack (AoA) of 5°, 10°, and 15° under non-cavitating conditions. Increasing AoA strengthens the reconstructed vortex, lowers the mean core-pressure estimate, and increases vortex wandering and pressure fluctuations. Proper orthogonal decomposition (POD)/extended POD reveals a change from a monopole-like pressure-fluctuation pattern at low AoA toward a dipole-like displacement pattern at higher AoA. These patterns are interpreted as qualitative indicators of pressure-based cavitation susceptibility. The DA framework therefore provides a physics-constrained approach for investigating near-field vortex velocity and pressure dynamics that are difficult to obtain from experiments or under-resolved simulations alone.
- 1 October 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (10)
Data assimilation of the near-field dynamics of the hydrofoil tip vortex
Tip vortex cavitation is a critical issue in marine hydrodynamics, yet its prediction is hampered by challenges in capturing the complex, unsteady flow in the hydrofoil near-field. Conventional experimental and numerical methods often struggle to resolve the unsteady structures and the physically consistent pressure–velocity coupling associated with vortex instability. This study applies an established continuous-adjoint data-assimilation (DA) framework to a new hydrofoil-tip-vortex application by assimilating time-resolved tomographic particle image velocimetry measurements into the spatially filtered Navier–Stokes equations. The DA step reconstructs a physics-constrained three-dimensional velocity field; pressure is subsequently estimated from that velocity field by solving a pressure Poisson equation. The flow is examined at angles of attack (AoA) of 5°, 10°, and 15° under non-cavitating conditions. Increasing AoA strengthens the reconstructed vortex, lowers the mean core-pressure estimate, and increases vortex wandering and pressure fluctuations. Proper orthogonal decomposition (POD)/extended POD reveals a change from a monopole-like pressure-fluctuation pattern at low AoA toward a dipole-like displacement pattern at higher AoA. These patterns are interpreted as qualitative indicators of pressure-based cavitation susceptibility. The DA framework therefore provides a physics-constrained approach for investigating near-field vortex velocity and pressure dynamics that are difficult to obtain from experiments or under-resolved simulations alone.
- 21 September 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1043, A35
Resolvent-guided optimisation of downstream-edge chamfering for flow-induced noise reduction in a confined orifice
This study develops a resolvent-guided optimisation framework for reducing flow-induced noise in a confined finite-thickness orifice through downstream-edge chamfering under a pressure-drop constraint. The target response is the downstream transmitted in-duct pressure below the first higher-order duct-mode cut-on. A steady base flow is combined with eddy-viscosity-enhanced resolvent analysis to construct a wall-pressure-related source proxy, and the selected design is assessed using large-eddy simulation. The baseline circular orifice supports strong amplification and intense wall-pressure loading over the downstream inner-orifice wall and immediate postorifice region, where in-hole recirculation, separated shear-layer development, and downstream recovery are strongly coupled. The optimisation identifies an optimal downstream chamfer with a length equal to 55 % of the orifice thickness and a chamfer angle of 50°. Rather than eliminating separation, this geometry redistributes amplification-supporting structures, Reynolds-stress concentrations and wall-pressure fluctuations away from the sharp downstream corner, weakening the compact dipole-source region. The wall-pressure spectra are reduced over almost the entire frequency range below the first higher-order duct-mode cut-on frequency, with strong attenuation of the dominant narrow-band peaks. The duct-based surface-pressure contribution remains dominant in the low Mach-number confined flow but is suppressed more strongly than the volume Reynolds-stress contribution. The residual volume source support is redistributed farther downstream with the displaced shear layer. The selected chamfer further retains a clear source-reduction benefit over a moderate Reynolds number range near the design condition. These results demonstrate an efficient route for pressure-loss-constrained noise reduction in confined internal flows.
- 21 September 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1043, A35
Resolvent-guided optimisation of downstream-edge chamfering for flow-induced noise reduction in a confined orifice
This study develops a resolvent-guided optimisation framework for reducing flow-induced noise in a confined finite-thickness orifice through downstream-edge chamfering under a pressure-drop constraint. The target response is the downstream transmitted in-duct pressure below the first higher-order duct-mode cut-on. A steady base flow is combined with eddy-viscosity-enhanced resolvent analysis to construct a wall-pressure-related source proxy, and the selected design is assessed using large-eddy simulation. The baseline circular orifice supports strong amplification and intense wall-pressure loading over the downstream inner-orifice wall and immediate postorifice region, where in-hole recirculation, separated shear-layer development, and downstream recovery are strongly coupled. The optimisation identifies an optimal downstream chamfer with a length equal to 55 % of the orifice thickness and a chamfer angle of 50°. Rather than eliminating separation, this geometry redistributes amplification-supporting structures, Reynolds-stress concentrations and wall-pressure fluctuations away from the sharp downstream corner, weakening the compact dipole-source region. The wall-pressure spectra are reduced over almost the entire frequency range below the first higher-order duct-mode cut-on frequency, with strong attenuation of the dominant narrow-band peaks. The duct-based surface-pressure contribution remains dominant in the low Mach-number confined flow but is suppressed more strongly than the volume Reynolds-stress contribution. The residual volume source support is redistributed farther downstream with the displaced shear layer. The selected chamfer further retains a clear source-reduction benefit over a moderate Reynolds number range near the design condition. These results demonstrate an efficient route for pressure-loss-constrained noise reduction in confined internal flows.
- 18 September 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (19) , 5329-5332
Time-adaptive particle image velocimetry framework via an event camera under continuous illumination
Event-based particle image velocimetry (PIV) offers a promising approach for high-speed flow diagnostics. However, conventional processing pipelines, constrained by fixed event accumulation times and uniform inter-frame intervals, do not fully leverage the asynchronous nature of event data, compromising the fidelity of reconstructed velocity fields. This Letter presents a time-adaptive event-based PIV framework (TA-EB-PIV) whose core mechanism dynamically adjusts event accumulation time and sampling interval based on local velocity estimates. This approach overcomes the constraints of fixed temporal parameters, effectively suppresses near-wall reflection interference, and improves particle image density. Experiments on flow past a NACA0012 airfoil at a 12° angle of attack (Re ≈ 6800) demonstrate the effectiveness of the proposed method. Compared to conventional fixed-interval PIV, TA-EB-PIV reduces the RMS divergence by 26.1%, standard deviation by 26.3%, and mean absolute divergence by 31.0%; outlier vectors by 24.8%; random error δ(U)/U 0 from 1.10% to 0.46%; and Reynolds shear stress uncertainty by nearly 30%; free-stream fluctuating velocity overestimation is reduced by 30.4% with near-wall noise markedly suppressed. POD analysis further reveals a more prominent spectral peak and an energy decay consistent with the −5/3 Kolmogorov scaling law. By decoupling the correlation window from fixed time steps, this method achieves self-adaptive temporal parameters, establishing a novel, to the best of our knowledge, framework for high-fidelity velocity reconstruction in complex flows.
- 18 September 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (19) , 5329-5332
Time-adaptive particle image velocimetry framework via an event camera under continuous illumination
Event-based particle image velocimetry (PIV) offers a promising approach for high-speed flow diagnostics. However, conventional processing pipelines, constrained by fixed event accumulation times and uniform inter-frame intervals, do not fully leverage the asynchronous nature of event data, compromising the fidelity of reconstructed velocity fields. This Letter presents a time-adaptive event-based PIV framework (TA-EB-PIV) whose core mechanism dynamically adjusts event accumulation time and sampling interval based on local velocity estimates. This approach overcomes the constraints of fixed temporal parameters, effectively suppresses near-wall reflection interference, and improves particle image density. Experiments on flow past a NACA0012 airfoil at a 12° angle of attack (Re ≈ 6800) demonstrate the effectiveness of the proposed method. Compared to conventional fixed-interval PIV, TA-EB-PIV reduces the RMS divergence by 26.1%, standard deviation by 26.3%, and mean absolute divergence by 31.0%; outlier vectors by 24.8%; random error δ(U)/U 0 from 1.10% to 0.46%; and Reynolds shear stress uncertainty by nearly 30%; free-stream fluctuating velocity overestimation is reduced by 30.4% with near-wall noise markedly suppressed. POD analysis further reveals a more prominent spectral peak and an energy decay consistent with the −5/3 Kolmogorov scaling law. By decoupling the correlation window from fixed time steps, this method achieves self-adaptive temporal parameters, establishing a novel, to the best of our knowledge, framework for high-fidelity velocity reconstruction in complex flows.
- Open Access
- 17 September 2026
- Published by Elsevier in SSRN Electronic Journal
Structured Control-Space Reduction for Adjoint-Based Reynolds-Stress Inversion
Reynolds-stress inversion from indirect mean-flow observations is intrinsically ill-posed: the Reynolds-averaged Navier–Stokes equations constrain the stress only through its divergence, local invariant representations can be non-injective, and pointwise stress controls scale with mesh size. We introduce a structured control-space reduction for adjoint Reynolds-stress inversion that addresses these three obstructions through the parameterization itself. The anisotropic stress direction is restricted to the symmetric, trace-free Pope basis, removing isotropic and divergence-free null directions and reduces the solenoidal null space to its intersection with a low-dimensional constitutive manifold. Spatial variation enters exclusively through local invariants: the five classical invariants are augmented by a wall-distance invariant and encoded in signed-logarithmic form to improve near-wall injectivity. The resulting globally shared coefficient functions are parameterized by compactly supported radial basis functions, with centers determined by volume-weighted k-means clustering in invariant space. Gradients of the frozen subproblem are obtained through the exact transpose of the radial-basis forward map, and the update is carried by Adam under a realizability backtracking safeguard. The framework is evaluated on two configurations. In square-duct flow, the reduced control dimension is nearly three orders of magnitude smaller than that of the full-order formulation, while the wall-distance augmentation recovers dynamically active stress components. The first five Pope tensors capture more than 99% of the anisotropy variance in the direct numerical simulation. Moreover, different sparse velocity-observation layouts produce nearly identical dominant singular spectra and closely aligned reduced gradients, explaining their remarkably similar inversion trajectories. In the separated bump flow, the augmented representation recovers the shear stress, the skin friction on both walls, and the two-peak turbulence-production structure downstream of reattachment. These results show that constitutive control-space reduction provides a compact, identifiable, and physically structured formulation for Reynolds-stress inversion.
- 17 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessStructured Control-Space Reduction for Adjoint-Based Reynolds-Stress Inversion
Reynolds-stress inversion from indirect mean-flow observations is intrinsically ill-posed: the Reynolds-averaged Navier–Stokes equations constrain the stress only through its divergence, local invariant representations can be non-injective, and pointwise stress controls scale with mesh size. We introduce a structured control-space reduction for adjoint Reynolds-stress inversion that addresses these three obstructions through the parameterization itself. The anisotropic stress direction is restricted to the symmetric, trace-free Pope basis, removing isotropic and divergence-free null directions and reduces the solenoidal null space to its intersection with a low-dimensional constitutive manifold. Spatial variation enters exclusively through local invariants: the five classical invariants are augmented by a wall-distance invariant and encoded in signed-logarithmic form to improve near-wall injectivity. The resulting globally shared coefficient functions are parameterized by compactly supported radial basis functions, with centers determined by volume-weighted k-means clustering in invariant space. Gradients of the frozen subproblem are obtained through the exact transpose of the radial-basis forward map, and the update is carried by Adam under a realizability backtracking safeguard. The framework is evaluated on two configurations. In square-duct flow, the reduced control dimension is nearly three orders of magnitude smaller than that of the full-order formulation, while the wall-distance augmentation recovers dynamically active stress components. The first five Pope tensors capture more than 99% of the anisotropy variance in the direct numerical simulation. Moreover, different sparse velocity-observation layouts produce nearly identical dominant singular spectra and closely aligned reduced gradients, explaining their remarkably similar inversion trajectories. In the separated bump flow, the augmented representation recovers the shear stress, the skin friction on both walls, and the two-peak turbulence-production structure downstream of reattachment. These results show that constitutive control-space reduction provides a compact, identifiable, and physically structured formulation for Reynolds-stress inversion.
- 3 September 2026
- Published by Springer Nature in Experiments in Fluids
- Vol. 67 (10) , 152
Phosphor thermometry: from on-surface to in-flow measurements
- 3 September 2026
- Published by Springer Nature in Experiments in Fluids
- Vol. 67 (10) , 152
Phosphor thermometry: from on-surface to in-flow measurements
- Open Access
Effects of Irradiance, Pressure, and Temperature on the Photodegradation of Fast Pressure-Sensitive Paints
Photodegradation limits the accuracy of fast pressure-sensitive paints (PSPs), but its dependences on irradiance and operating conditions remain insufficiently researched. Here, the photodegradation kinetics of a polymer–ceramic PSP (PC-PSP) and a mesoporous-particle PSP (MP-PSP) were investigated under independently varied irradiance (50–122 mW/cm2), pressure (0.5–100 kPa), and temperature (20–100 °C). Normalized intensity histories acquired during 900 s of continuous irradiation were fitted with a bi-exponential model, whose composite degradation rate was correlated to the studied parameters using physical relations. PC-PSP exhibited greater absolute degradation and an approximately linear irradiance dependence (m = 1.28), whereas MP-PSP showed a nonlinear dependence (m = 2.13), consistent with a greater relative contribution from photooxidative processes. The degradation rate of PC-PSP decreased predominantly with increasing pressure because oxygen quenching reduced the excited-state luminophore population. MP-PSP exhibited a non-monotonic pressure dependence: decreasing pressure initially accelerated degradation by weakening oxygen quenching, whereas further pressure reduction below the half-saturation region suppressed oxygen-limited photooxidation. Increasing temperature generally accelerated degradation in both formulations; the fitted apparent activation energies were 12.99 kJ mol−1 for PC-PSP and 33.12 kJ mol−1 for MP-PSP, reflecticng the stronger overall temperature dependence of MP-PSP. These findings provide a basis for quantitatively evaluating PSP photostability and assessing photodegradation-induced measurement errors.
Open AccessEffects of Irradiance, Pressure, and Temperature on the Photodegradation of Fast Pressure-Sensitive Paints
Photodegradation limits the accuracy of fast pressure-sensitive paints (PSPs), but its dependences on irradiance and operating conditions remain insufficiently researched. Here, the photodegradation kinetics of a polymer–ceramic PSP (PC-PSP) and a mesoporous-particle PSP (MP-PSP) were investigated under independently varied irradiance (50–122 mW/cm2), pressure (0.5–100 kPa), and temperature (20–100 °C). Normalized intensity histories acquired during 900 s of continuous irradiation were fitted with a bi-exponential model, whose composite degradation rate was correlated to the studied parameters using physical relations. PC-PSP exhibited greater absolute degradation and an approximately linear irradiance dependence (m = 1.28), whereas MP-PSP showed a nonlinear dependence (m = 2.13), consistent with a greater relative contribution from photooxidative processes. The degradation rate of PC-PSP decreased predominantly with increasing pressure because oxygen quenching reduced the excited-state luminophore population. MP-PSP exhibited a non-monotonic pressure dependence: decreasing pressure initially accelerated degradation by weakening oxygen quenching, whereas further pressure reduction below the half-saturation region suppressed oxygen-limited photooxidation. Increasing temperature generally accelerated degradation in both formulations; the fitted apparent activation energies were 12.99 kJ mol−1 for PC-PSP and 33.12 kJ mol−1 for MP-PSP, reflecticng the stronger overall temperature dependence of MP-PSP. These findings provide a basis for quantitatively evaluating PSP photostability and assessing photodegradation-induced measurement errors.
- 26 August 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1041, A11
Modulation of vorticity flux from wall-pressure footprints via continuous data assimilation
This study makes a twofold contribution regarding vorticity flux modulation by wall-pressure ‘footprints’. First, we present a continuous data assimilation (DA) framework for reconstructing flow fields from wall-pressure observations by embedding an adjoint-derived scalar source into the pressure Poisson equation. By leveraging elliptic pressure–velocity coupling, the method propagates wall-driven corrections across the domain, and avoids the costly global backward integration of four-dimensional variational DA while retaining phase-aware control of vorticity production and modal energy. Second, we validate the framework on a three-dimensional turbulent flow over a NACA0012 aerofoil at 12 Superscript ring $12^{\circ}$ , using synthetic wall-pressure data from high-fidelity large eddy simulations (LES). The DA strategy mitigates unresolved transition physics in coarse simulations by suppressing premature separation, restoring attachment, and recovering key flow metrics with near-LES fidelity. Spectral and wavelet analyses further demonstrate that the reconstruction captures both the scale-dependent energy distribution and the spatial coherence of the dominant structures. Two complementary mechanisms are identified: (i) an oscillator-like mechanism, where phase-locked tangential pressure gradients couple with normal vorticity gradients to modulate near-wall vorticity through linear and nonlinear interactions; and (ii) an amplifier-like mechanism, where trailing-edge inputs propagate upstream via scale-dependent elliptic coupling, exciting receptivity modes, and triggering transition cascades through Orr mechanisms and resolvent-matched instabilities. The sensor coverage study reveals scale-dependent sensitivity: streamwise-elongated motions remain robust under sparse arrays, whereas spanwise-dominated structures require near-wall sensing. These findings broaden the scope of continuous DA for wall-bounded flow reconstructions, offering a computationally efficient way to incorporate wall-pressure observations into existing solvers for enhanced accuracy.- 26 August 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1041, A11
Modulation of vorticity flux from wall-pressure footprints via continuous data assimilation
This study makes a twofold contribution regarding vorticity flux modulation by wall-pressure ‘footprints’. First, we present a continuous data assimilation (DA) framework for reconstructing flow fields from wall-pressure observations by embedding an adjoint-derived scalar source into the pressure Poisson equation. By leveraging elliptic pressure–velocity coupling, the method propagates wall-driven corrections across the domain, and avoids the costly global backward integration of four-dimensional variational DA while retaining phase-aware control of vorticity production and modal energy. Second, we validate the framework on a three-dimensional turbulent flow over a NACA0012 aerofoil at 12 Superscript ring $12^{\circ}$ , using synthetic wall-pressure data from high-fidelity large eddy simulations (LES). The DA strategy mitigates unresolved transition physics in coarse simulations by suppressing premature separation, restoring attachment, and recovering key flow metrics with near-LES fidelity. Spectral and wavelet analyses further demonstrate that the reconstruction captures both the scale-dependent energy distribution and the spatial coherence of the dominant structures. Two complementary mechanisms are identified: (i) an oscillator-like mechanism, where phase-locked tangential pressure gradients couple with normal vorticity gradients to modulate near-wall vorticity through linear and nonlinear interactions; and (ii) an amplifier-like mechanism, where trailing-edge inputs propagate upstream via scale-dependent elliptic coupling, exciting receptivity modes, and triggering transition cascades through Orr mechanisms and resolvent-matched instabilities. The sensor coverage study reveals scale-dependent sensitivity: streamwise-elongated motions remain robust under sparse arrays, whereas spanwise-dominated structures require near-wall sensing. These findings broaden the scope of continuous DA for wall-bounded flow reconstructions, offering a computationally efficient way to incorporate wall-pressure observations into existing solvers for enhanced accuracy.- Open Access
- 25 August 2026
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 45 (5) , 1
Erratum: Tensor Decomposition-Based Four-dimensional Background-Oriented Schlieren Tomography for High-Speed, High-Fidelity Flow Field Reconstruction
This is an erratum for the article “Tensor Decomposition-Based Four-Dimensional Background-Oriented Schlieren Tomography for High-Speed, High-Fidelity Flow Field Reconstruction” published in ACM Trans. Graph. 45, 5, Article 35 (June 2026), 19 pages.
- 25 August 2026
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Graphics
- Vol. 45 (5) , 1
Open AccessErratum: Tensor Decomposition-Based Four-dimensional Background-Oriented Schlieren Tomography for High-Speed, High-Fidelity Flow Field Reconstruction
This is an erratum for the article “Tensor Decomposition-Based Four-Dimensional Background-Oriented Schlieren Tomography for High-Speed, High-Fidelity Flow Field Reconstruction” published in ACM Trans. Graph. 45, 5, Article 35 (June 2026), 19 pages.