Charles E. Forbes
Research Subjects
Charles E. Forbes has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
David E. Nikles
Hoechst Celanese Research Div. (USA)
2 shared publicationsM.C.R. Symons
2 shared publicationsR. H. Holm
2 shared publicationsA. Gelbman
Visible Tech‐knowledgy, 612 River Terrace, Hoboken, NJ 07030
1 shared publicationA. Gold
1 shared publication- Brian C. Harvey
ZOLL Medical Corporation, 269 Mill Rd #269, Chelmsford, MA, 01824, USA
1 shared publication
Latest Publications
- Open Access
- 1 December 2018
- Published by Taylor & Francis in Medical Devices: Evidence and Research
- Vol. ume 11, 419-426
Comparison of a micro-electro-mechanical system airflow sensor with the pneumotach in the forced oscillation technique
Purpose: This study supports the use of thin-film micro-electro-mechanical system (MEMS) airflow sensors in the forced oscillation technique. Materials and methods: The study employed static testing using air flow standards and computer-controlled sound attenuations at 8 Hz. Human feasibility studies were conducted with a testing apparatus consisting of a pneumotach and thin-film MEMS air flow sensors in series. Short-time Fourier transform spectra were obtained using SIGVIEW software. Results: Three tests were performed, and excellent correlations were observed between the probes. The thin-film MEMS probe showed superior sensitivity to higher frequencies up to 200 Hz. Conclusion: The results suggest that lower-cost thin-film MEMS can be used for forced oscillation technique applications (including home care devices) that will benefit patients suffering from pulmonary diseases such as asthma, COPD, and cystic fibrosis.
- 1 December 2018
- Published by Taylor & Francis in Medical Devices: Evidence and Research
- Vol. ume 11, 419-426
Open AccessComparison of a micro-electro-mechanical system airflow sensor with the pneumotach in the forced oscillation technique
Purpose: This study supports the use of thin-film micro-electro-mechanical system (MEMS) airflow sensors in the forced oscillation technique. Materials and methods: The study employed static testing using air flow standards and computer-controlled sound attenuations at 8 Hz. Human feasibility studies were conducted with a testing apparatus consisting of a pneumotach and thin-film MEMS air flow sensors in series. Short-time Fourier transform spectra were obtained using SIGVIEW software. Results: Three tests were performed, and excellent correlations were observed between the probes. The thin-film MEMS probe showed superior sensitivity to higher frequencies up to 200 Hz. Conclusion: The results suggest that lower-cost thin-film MEMS can be used for forced oscillation technique applications (including home care devices) that will benefit patients suffering from pulmonary diseases such as asthma, COPD, and cystic fibrosis.
- 1 May 2002
- Published by Wiley in SID Symposium Digest of Technical Papers
- Vol. 33 (1) , 1200-1203
43.3: A Rugged Conformable Backplane Fabricated with an a‐Si:H TFT Array on a Polyimide Substrate
Flexible active matrix TFT array backplanes were fabricated on 51 μm thick polyimide foil (Kapton®E) substrates. Expected applications include low cost flexible lightweight displays using electrophoretic, OLED, and PDLC displays. TFT performance of the Kapton backplane is nearly identically to the same structure fabricated on a glass substrate. Measurement of the transfer and output characteristics while the sample was bent at an inward radius of curvature of 2.5 cm indicate no loss in TFT performance.
- 1 May 2002
- Published by Wiley in SID Symposium Digest of Technical Papers
- Vol. 33 (1) , 1200-1203
43.3: A Rugged Conformable Backplane Fabricated with an a‐Si:H TFT Array on a Polyimide Substrate
Flexible active matrix TFT array backplanes were fabricated on 51 μm thick polyimide foil (Kapton®E) substrates. Expected applications include low cost flexible lightweight displays using electrophoretic, OLED, and PDLC displays. TFT performance of the Kapton backplane is nearly identically to the same structure fabricated on a glass substrate. Measurement of the transfer and output characteristics while the sample was bent at an inward radius of curvature of 2.5 cm indicate no loss in TFT performance.
- 1 April 1995
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 7 (4) , 403-405
Large-core, high-bandwidth polymer optical fiber for near infrared use
High bandwidth (more than 500 MHz/spl middot/km) graded-index polymer optical fiber (GI POF) for near infra-red use was successfully fabricated by using partially fluorinated acrylate polymer. Since only three carbon-hydrogen bonds exist in a monomer unit, an absorption loss due to the stretching vibration of the carbon-hydrogen bond was remarkably reduced compared with the conventional POF's. The attenuation of the GI POF at 780-nm wavelength was 135 dB/km, which is much lower than that of the PMMA core POF (800 dB/km). The fluorinated polymer-based GI POF is satisfying a significant segment of high-speed multimedia network applications.<>
- 1 April 1995
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 7 (4) , 403-405
Large-core, high-bandwidth polymer optical fiber for near infrared use
High bandwidth (more than 500 MHz/spl middot/km) graded-index polymer optical fiber (GI POF) for near infra-red use was successfully fabricated by using partially fluorinated acrylate polymer. Since only three carbon-hydrogen bonds exist in a monomer unit, an absorption loss due to the stretching vibration of the carbon-hydrogen bond was remarkably reduced compared with the conventional POF's. The attenuation of the GI POF at 780-nm wavelength was 135 dB/km, which is much lower than that of the PMMA core POF (800 dB/km). The fluorinated polymer-based GI POF is satisfying a significant segment of high-speed multimedia network applications.<>
- 1 July 1991
- Published by SPIE-Intl Soc Optical Eng
- Vol. 1499, 39-41
Accelerated aging studies for polycarbonate optical disk substrates
Accelerated aging studies demonstrated that polycarbonate substrates degrade by a hydrolytic cleavage of the polymer chain. Data collected at different temperatures obeyed an Arrhenius relation. The activation energy for polycarbonate degradation was 68.0 kJ/mol.© (1991) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
- 1 July 1991
- Published by SPIE-Intl Soc Optical Eng
- Vol. 1499, 39-41
Accelerated aging studies for polycarbonate optical disk substrates
Accelerated aging studies demonstrated that polycarbonate substrates degrade by a hydrolytic cleavage of the polymer chain. Data collected at different temperatures obeyed an Arrhenius relation. The activation energy for polycarbonate degradation was 68.0 kJ/mol.© (1991) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.
- 1 October 1989
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 136 (10) , 2887-2891
Proton‐Dependent Electrochemical Behavior of Oligomeric Polyaniline Compounds
The redox chemistry of a model compound of polyaniline, N,N′‐diphenyl‐p‐phenylenediamine, has been studied in acidic media. The redox processes of this “dimer” have been shown to be highly reversible and pH‐dependent. The dimer undergoes a two‐step oxidation from amine to radical cation to imine forms. An equilibrium constant was determined for the conversion of a 50:50 mixture of amine and imine forms to the radical cation as a function of proton concentration. A 50% conversion to the radical form occurs at a pH of 2.2. This pH value corresponds very well with the midpoint of the metal‐to‐insulator transition in polyaniline as a function of pH. ESR measurements were used to study the radical cation in solution. Spin density was found to be highest on the nitrogens, but considerable delocalization into central and end phenyls was found.
- 1 October 1989
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 136 (10) , 2887-2891
Proton‐Dependent Electrochemical Behavior of Oligomeric Polyaniline Compounds
The redox chemistry of a model compound of polyaniline, N,N′‐diphenyl‐p‐phenylenediamine, has been studied in acidic media. The redox processes of this “dimer” have been shown to be highly reversible and pH‐dependent. The dimer undergoes a two‐step oxidation from amine to radical cation to imine forms. An equilibrium constant was determined for the conversion of a 50:50 mixture of amine and imine forms to the radical cation as a function of proton concentration. A 50% conversion to the radical form occurs at a pH of 2.2. This pH value corresponds very well with the midpoint of the metal‐to‐insulator transition in polyaniline as a function of pH. ESR measurements were used to study the radical cation in solution. Spin density was found to be highest on the nitrogens, but considerable delocalization into central and end phenyls was found.
- 19 May 1989
- Published by SPIE-Intl Soc Optical Eng
- p. 43-50
Accelerated Aging Studies for Organic Optical Data Storage Media
The excellent stability of Hoechst Celanese WORM media was demonstrated in accelerated aging studies. CNR data was measured as a function of exposure time for disks exposed to 65°/80% RH, 80°/80% RH, and 90°/80% RH. Disks were also exposed to a high intensity xenon lamp to compare the relative stability to visible and ultraviolet radiation. The stability of the polycarbonate substrate and the recording layer were investigated.
- 19 May 1989
- Published by SPIE-Intl Soc Optical Eng
- p. 43-50
Accelerated Aging Studies for Organic Optical Data Storage Media
The excellent stability of Hoechst Celanese WORM media was demonstrated in accelerated aging studies. CNR data was measured as a function of exposure time for disks exposed to 65°/80% RH, 80°/80% RH, and 90°/80% RH. Disks were also exposed to a high intensity xenon lamp to compare the relative stability to visible and ultraviolet radiation. The stability of the polycarbonate substrate and the recording layer were investigated.
- 1 January 1987
- Published by Royal Society of Chemistry (RSC) in Journal of the Chemical Society, Chemical Communications
- No. 6,p. 433-436
Nuclear magnetic resonances of BaTiO3
At temperatures greater than the Curie point (135 °C), narrow 137Ba and 47,49Ti nuclear magnetic resonances (static conditions) have been observed for the cubic phase of polycrystalline BaTiO3; additionally, 137Ba and 93Nb resonances have been detected at elevated temperatures for BaTiO3-based ceramics doped with Nb.
- 1 January 1987
- Published by Royal Society of Chemistry (RSC) in Journal of the Chemical Society, Chemical Communications
- No. 6,p. 433-436
Nuclear magnetic resonances of BaTiO3
At temperatures greater than the Curie point (135 °C), narrow 137Ba and 47,49Ti nuclear magnetic resonances (static conditions) have been observed for the cubic phase of polycrystalline BaTiO3; additionally, 137Ba and 93Nb resonances have been detected at elevated temperatures for BaTiO3-based ceramics doped with Nb.
- 1 June 1986
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 24 (6) , 1281-1296
High‐temperature reactions of hydroxyl and carboxyl PET chain end groups in the presence of aromatic phosphite
When melt‐extruded in the presence of triphenylphosphite (TPP), the molecular weight of polyesters such as poly(ethylene terephthalate) (PET) increases with time. Analysis of the PET chain end groups and model studies of high‐temperature reactions indicate that, most likely, the process leading to chain extension of PET in the presence of TPP takes place in two steps. In the first step, TPP rapidly reacts with the hydroxyl end groups by displacing one phenoxy group from the TPP. In the second step, a slow reaction takes place between the alkyldiphenyl phosphite and carboxylic chain end groups, forming an ester bond between the carboxyl and alkyl groups, and producing diphenylphosphite (DPP) as a reaction by‐product. The DPP tautomerizes to its pentacovalently bonded stabler form of diphenylphosphate, the form in which the DPP was usually detected in our analyses. The ester formation results in the extension of the PET chains. Model studies are presented which support the proposed mechanism.
- 1 June 1986
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 24 (6) , 1281-1296
High‐temperature reactions of hydroxyl and carboxyl PET chain end groups in the presence of aromatic phosphite
When melt‐extruded in the presence of triphenylphosphite (TPP), the molecular weight of polyesters such as poly(ethylene terephthalate) (PET) increases with time. Analysis of the PET chain end groups and model studies of high‐temperature reactions indicate that, most likely, the process leading to chain extension of PET in the presence of TPP takes place in two steps. In the first step, TPP rapidly reacts with the hydroxyl end groups by displacing one phenoxy group from the TPP. In the second step, a slow reaction takes place between the alkyldiphenyl phosphite and carboxylic chain end groups, forming an ester bond between the carboxyl and alkyl groups, and producing diphenylphosphite (DPP) as a reaction by‐product. The DPP tautomerizes to its pentacovalently bonded stabler form of diphenylphosphate, the form in which the DPP was usually detected in our analyses. The ester formation results in the extension of the PET chains. Model studies are presented which support the proposed mechanism.
- 30 September 1985
- Published by Elsevier in Synthetic Metals
- Vol. 11 (4) , 251-270
Thermal enhancement of the electrical conductivities of alkali metal-doped polyacetylene complexes
- 30 September 1985
- Published by Elsevier in Synthetic Metals
- Vol. 11 (4) , 251-270
Thermal enhancement of the electrical conductivities of alkali metal-doped polyacetylene complexes
- 1 June 1985
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 107 (13) , 4098-4100
Selective alkali metal and hydrogen reduction of benzene to cyclohexene
- 1 June 1985
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 107 (13) , 4098-4100
Selective alkali metal and hydrogen reduction of benzene to cyclohexene