Giorgia Longobardi
Research Subjects
Giorgia Longobardi has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Florin Udrea
Electrical Engineering Department, University of Cambridge, Cambridgeshire, UK
4 shared publications- Florin Udrea
University of Cambridge
3 shared publications - Loizos Efthymiou
Electrical Engineering Department, University of Cambridge, UK
3 shared publications - Abdalla Eblabla
Centre for High Frequency Engineering, Cardiff University 1 , Cardiff CF24 4HF
1 shared publication Alain Charles
Infineon Technologies Americas Corp, El Segundo, CA 90245, United States of America
1 shared publication- Andrea De Luca
Department of Engineering, University of Cambridge, Cambridge CB3 0FA, UK
1 shared publication
Latest Publications
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
GaN-on-Si Thermoresistive Flow Sensor with Gold Hot-wire
In this paper we present for the first time a Gallium Nitride-on-Silicon (GaN-on-Si) anenometric flow sensor based on a gold (Au) thermoresistive hot-wire. The device was fabricated in a custom GaN process, with an etching process to release a membrane made of the GaN stack. This membrane thermally isolates the hot-wire, increasing its thermal efficiency, which was measured to be 1.04°C/mW. Testing was performed at mass flow rates from 0-4 SLPM using a custom gas rig. The sensitivity of the device, driven in a constant current mode at 3 different zero-flow temperatures, was compared showing an increase in peak sensitivity of 67% at 250°C compared to 150°C.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
GaN-on-Si Thermoresistive Flow Sensor with Gold Hot-wire
In this paper we present for the first time a Gallium Nitride-on-Silicon (GaN-on-Si) anenometric flow sensor based on a gold (Au) thermoresistive hot-wire. The device was fabricated in a custom GaN process, with an etching process to release a membrane made of the GaN stack. This membrane thermally isolates the hot-wire, increasing its thermal efficiency, which was measured to be 1.04°C/mW. Testing was performed at mass flow rates from 0-4 SLPM using a custom gas rig. The sensitivity of the device, driven in a constant current mode at 3 different zero-flow temperatures, was compared showing an increase in peak sensitivity of 67% at 250°C compared to 150°C.
- Top Cited Papers
- 28 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 40 (8) , 1253-1256
Understanding the Threshold Voltage Instability During OFF-State Stress in p-GaN HEMTs
In this letter we investigate by means of experimental results and TCAD simulations the threshold voltage instability due to off-state drain stress in p-GaN gate AlGaN/GaN-on-Si HEMTs. When the drain of the p-GaN HEMT is biased in the off-state the threshold voltage (Vth) shows a linear increase up to ∼ 40%. This increase saturates at drain bias voltages above 50V. The positive Vth shift is attributed to the ionization of acceptor traps in the AlGaN region below the p-GaN gate with the source of these trapping sites suggested to be the p-GaN gate out-diffused Mg dopant atoms. The ionization of the Mg acceptors due to high electric field during off-state bias and the removal of the generated holes from the AlGaN region through the gate contact creates the charge conditions for a positive Vth shift. The sharp decrease in the gate drain capacitance (Cgd) for VD < 50V, the simulated gate edge electric field reaching its peak for a drain voltage bias VD ∼ 50V and the positive threshold voltage shift observed for negative gate stress further validate the proposed model.
- 28 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 40 (8) , 1253-1256
Top Cited PapersUnderstanding the Threshold Voltage Instability During OFF-State Stress in p-GaN HEMTs
In this letter we investigate by means of experimental results and TCAD simulations the threshold voltage instability due to off-state drain stress in p-GaN gate AlGaN/GaN-on-Si HEMTs. When the drain of the p-GaN HEMT is biased in the off-state the threshold voltage (Vth) shows a linear increase up to ∼ 40%. This increase saturates at drain bias voltages above 50V. The positive Vth shift is attributed to the ionization of acceptor traps in the AlGaN region below the p-GaN gate with the source of these trapping sites suggested to be the p-GaN gate out-diffused Mg dopant atoms. The ionization of the Mg acceptors due to high electric field during off-state bias and the removal of the generated holes from the AlGaN region through the gate contact creates the charge conditions for a positive Vth shift. The sharp decrease in the gate drain capacitance (Cgd) for VD < 50V, the simulated gate edge electric field reaching its peak for a drain voltage bias VD ∼ 50V and the positive threshold voltage shift observed for negative gate stress further validate the proposed model.
- 20 May 2019
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 58 (SC) , SCCD12
Suppression technique of vertical leakage current in GaN-on-Si power transistors
This paper analyzes the possible physical mechanisms responsible of high vertical leakage in GaN-on-Si power transistors. Vertical leakage and back bias measurement are presented and compared against TCAD simulations with the aim of identifying the physical phenomena and parameters that impact the vertical leakage. An easy-to-implement TCAD approach for simulating the non-ideality of the AlN nucleation layer and AlN/Si interface is introduced. Finally, a method to largely suppress the vertical leakage via implantation of highly doped p ++ wells at the AlN/Si interface is proposed and investigated via TCAD simulations. The suggested technique allows for a reduction of five orders of magnitude in the leakage current when a p ++ surface doping in excess of 5 × 10 19 cm −3 is implanted at the Si-substrate surface. In this work, a normally-on HEMT is investigated but the analysis can be extended to any GaN-on-Si power device.
- 20 May 2019
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 58 (SC) , SCCD12
Suppression technique of vertical leakage current in GaN-on-Si power transistors
This paper analyzes the possible physical mechanisms responsible of high vertical leakage in GaN-on-Si power transistors. Vertical leakage and back bias measurement are presented and compared against TCAD simulations with the aim of identifying the physical phenomena and parameters that impact the vertical leakage. An easy-to-implement TCAD approach for simulating the non-ideality of the AlN nucleation layer and AlN/Si interface is introduced. Finally, a method to largely suppress the vertical leakage via implantation of highly doped p ++ wells at the AlN/Si interface is proposed and investigated via TCAD simulations. The suggested technique allows for a reduction of five orders of magnitude in the leakage current when a p ++ surface doping in excess of 5 × 10 19 cm −3 is implanted at the Si-substrate surface. In this work, a normally-on HEMT is investigated but the analysis can be extended to any GaN-on-Si power device.
- 25 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (5) , 2301-2306
Bonding Pad Over Active Area Layout for Lateral AlGaN/GaN Power HEMTs: A Critical View
This paper investigates the advantages and disadvantages of bonding pad over active area (BPOA) layout over a conventional layout for lateral AlGaN/GaN HEMTs designed for use in power applications. Extensive analysis of the performance of a BPOA device, both experimentally and supported by 3-D TCAD model simulations, reveals that while it can offer a higher current capability per unit area, it can lead to other disadvantages compared to a conventional design when considering reliability aspects.
- 25 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (5) , 2301-2306
Bonding Pad Over Active Area Layout for Lateral AlGaN/GaN Power HEMTs: A Critical View
This paper investigates the advantages and disadvantages of bonding pad over active area (BPOA) layout over a conventional layout for lateral AlGaN/GaN HEMTs designed for use in power applications. Extensive analysis of the performance of a BPOA device, both experimentally and supported by 3-D TCAD model simulations, reveals that while it can offer a higher current capability per unit area, it can lead to other disadvantages compared to a conventional design when considering reliability aspects.
- 29 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 64 (11) , 4415-4423
On the Time-Dependent Transport Mechanism Between Surface Traps and the 2DEG in AlGaN/GaN Devices
The physical mechanisms involved in the trapping and de-trapping processes associated with surface donor traps in gallium nitride (GaN) transistors are discussed in this paper. The paper challenges the conventional transient techniques adopted for extrapolating the trap energy level via experiments and TCAD simulations. Transient TCAD simulations were employed to reproduce the time-dependent electrical behavior of a metal-on-insulator field-effect transistor and explain the influence of the electric field and energy barrier on the transient time associated with the trapping and de-trapping mechanisms of surface traps. The comparison between three test structures and the relative variation of the trapping and de-trapping times with the bias and trap parameters leads to the suggestion of a proposed test structure and bias configuration to accurately extrapolate the energy level of surface traps in GaN transistors.
- 29 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 64 (11) , 4415-4423
On the Time-Dependent Transport Mechanism Between Surface Traps and the 2DEG in AlGaN/GaN Devices
The physical mechanisms involved in the trapping and de-trapping processes associated with surface donor traps in gallium nitride (GaN) transistors are discussed in this paper. The paper challenges the conventional transient techniques adopted for extrapolating the trap energy level via experiments and TCAD simulations. Transient TCAD simulations were employed to reproduce the time-dependent electrical behavior of a metal-on-insulator field-effect transistor and explain the influence of the electric field and energy barrier on the transient time associated with the trapping and de-trapping mechanisms of surface traps. The comparison between three test structures and the relative variation of the trapping and de-trapping times with the bias and trap parameters leads to the suggestion of a proposed test structure and bias configuration to accurately extrapolate the energy level of surface traps in GaN transistors.
- Open Access
On the Source of Oscillatory Behaviour during Switching of Power Enhancement Mode GaN HEMTs
With Gallium Nitride (GaN) device technology for power electronics applications being ramped up for volume production, an increasing amount of research is now focused on the performance of GaN power devices in circuits. In this study, an enhancement mode GaN high electron mobility transistor (HEMT) is switched in a clamped inductive switching configuration with the aim of investigating the source of oscillatory effects observed. These arise as a result of the increased switching speed capability of GaN devices compared to their silicon counterparts. The study identifies the two major mechanisms (Miller capacitance charge and parasitic common source inductance) that can lead to ringing behaviour during turn-off and considers the effect of temperature on the latter. Furthermore, the experimental results are backed by SPICE modelling to evaluate the contribution of different circuit components to oscillations. The study concludes with good design techniques that can suppress the effects discussed.
Open AccessOn the Source of Oscillatory Behaviour during Switching of Power Enhancement Mode GaN HEMTs
With Gallium Nitride (GaN) device technology for power electronics applications being ramped up for volume production, an increasing amount of research is now focused on the performance of GaN power devices in circuits. In this study, an enhancement mode GaN high electron mobility transistor (HEMT) is switched in a clamped inductive switching configuration with the aim of investigating the source of oscillatory effects observed. These arise as a result of the increased switching speed capability of GaN devices compared to their silicon counterparts. The study identifies the two major mechanisms (Miller capacitance charge and parasitic common source inductance) that can lead to ringing behaviour during turn-off and considers the effect of temperature on the latter. Furthermore, the experimental results are backed by SPICE modelling to evaluate the contribution of different circuit components to oscillations. The study concludes with good design techniques that can suppress the effects discussed.
- Open Access
- 1 December 2015
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 8 (12) , 2322-2328
Investigation of surface charges and traps in gallium nitride/aluminium gallium nitride/gallium nitride high‐voltage transistors via measurements and technology computer‐aided design simulations of transfer characteristics of metal–insulator–semiconductor field‐effect transistors and high‐electron‐mobility transistors
This study presents a detailed analysis of the Plasma‐enhanced chemical vapour deposition (PECVD) silicon‐nitride/semiconductor interface of gallium nitride (GaN) transistors through the study of the transfer characteristics of a large‐gate‐area metal‐insulator‐semiconductor field‐effect transistor (MISFET). I d – V g measurements were performed on several MISFETs across the wafer and for all of them the authors observed strong hysteresis between forward and reverse sweeps and a double kink. These features indicate the presence of traps beneath the gate electrode. Neither the hysteresis nor the kinks were seen in the measured high‐electron‐mobility transistor (HEMT) characteristics suggesting that the passivation/semiconductor interface is electrically responsible for them. The transfer characteristics of the MISFET have been reproduced using a technology computer‐aided design (TCAD) deck that includes fixed charges and donor traps at the passivation/semiconductor interface. The impact of these charges on the I d – V g and their influence on the formation of a surface‐inversion layer is here explained through extensive TCAD simulations. This study has also been extended to different temperatures between 35 and 75°C to investigate the change in the transfer characteristics at elevated temperatures. It is shown that the hysteresis observed between forward and reverse sweeps and the transconductance decrease significantly with increasing temperature.
- 1 December 2015
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 8 (12) , 2322-2328
Open AccessInvestigation of surface charges and traps in gallium nitride/aluminium gallium nitride/gallium nitride high‐voltage transistors via measurements and technology computer‐aided design simulations of transfer characteristics of metal–insulator–semiconductor field‐effect transistors and high‐electron‐mobility transistors
This study presents a detailed analysis of the Plasma‐enhanced chemical vapour deposition (PECVD) silicon‐nitride/semiconductor interface of gallium nitride (GaN) transistors through the study of the transfer characteristics of a large‐gate‐area metal‐insulator‐semiconductor field‐effect transistor (MISFET). I d – V g measurements were performed on several MISFETs across the wafer and for all of them the authors observed strong hysteresis between forward and reverse sweeps and a double kink. These features indicate the presence of traps beneath the gate electrode. Neither the hysteresis nor the kinks were seen in the measured high‐electron‐mobility transistor (HEMT) characteristics suggesting that the passivation/semiconductor interface is electrically responsible for them. The transfer characteristics of the MISFET have been reproduced using a technology computer‐aided design (TCAD) deck that includes fixed charges and donor traps at the passivation/semiconductor interface. The impact of these charges on the I d – V g and their influence on the formation of a surface‐inversion layer is here explained through extensive TCAD simulations. This study has also been extended to different temperatures between 35 and 75°C to investigate the change in the transfer characteristics at elevated temperatures. It is shown that the hysteresis observed between forward and reverse sweeps and the transconductance decrease significantly with increasing temperature.