Qijun Lu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qijun Lu has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Yintang Yang
Xidian University
12 shared publications - Xiaoxian Liu
Key Laboratory of Analog Integrated Circuits and Systems, Ministry of Education, School of Integrated Circuits, Xidian University, Xian, China
11 shared publications - Zhangming Zhu
Xidian University
10 shared publications - Xiangkun Yin
Xidian University
9 shared publications - Yang Liu
Key Laboratory of Analog Integrated Circuits and Systems, Ministry of Education, School of Integrated Circuits, Xidian University, Xian, China
8 shared publications Zhangming Zhu
School of Microelectronics, Xidian University, Xi'an, China
3 shared publications
Latest Publications
- 4 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 32 (1) , 29-32
A Miniatured Passive Low-Pass Filter With Ultrawide Stopband Based on 3-D Integration Technology
By using integrated lumped elements based on through-silicon via (TSV) technology, a 3-D low-pass filter (LPF) with ultracompact size and ultrawide stopband is proposed. The 3-D magnetic coupling is enhanced between microsize spiral inductors to increase the mutual inductance and improve the high-frequency performance. A coaxial TSV with enhanced capacitance in high resistivity silicon (HRS) is utilized both as capacitor and as a vertical interconnection without any overhead in area and routing. The 3-D nature of the proposed filter yields a miniaturized size of $0.2\times0.10$ mm 2 . The LPF is analyzed with equivalent circuit model and validated with the well-matched $S$ -parameters obtained by finite element method simulation and measurement. With −3-dB cutoff frequency at 2.6 GHz, the LPF exhibits an insertion loss below 1 dB, a reflection loss over 17 dB in the passband, and a suppression level over 20 dB from 5.28 up to 40 GHz in the stopband.
- 4 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 32 (1) , 29-32
A Miniatured Passive Low-Pass Filter With Ultrawide Stopband Based on 3-D Integration Technology
By using integrated lumped elements based on through-silicon via (TSV) technology, a 3-D low-pass filter (LPF) with ultracompact size and ultrawide stopband is proposed. The 3-D magnetic coupling is enhanced between microsize spiral inductors to increase the mutual inductance and improve the high-frequency performance. A coaxial TSV with enhanced capacitance in high resistivity silicon (HRS) is utilized both as capacitor and as a vertical interconnection without any overhead in area and routing. The 3-D nature of the proposed filter yields a miniaturized size of $0.2\times0.10$ mm 2 . The LPF is analyzed with equivalent circuit model and validated with the well-matched $S$ -parameters obtained by finite element method simulation and measurement. With −3-dB cutoff frequency at 2.6 GHz, the LPF exhibits an insertion loss below 1 dB, a reflection loss over 17 dB in the passband, and a suppression level over 20 dB from 5.28 up to 40 GHz in the stopband.
- 4 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 32 (1) , 37-40
A T-Model With Parameter Extraction Method for Modeling 3-D Spiral Inductor
A new frequency-independent modified T-equivalent circuit for 3-D spiral inductor is proposed in this letter. Closed-form analytical expressions are proposed account for configuration and physics-based effect. Compared with double- $\pi $ model, it uses less number of elements to capture the self-resonant frequency (SRF) information. Compared with the existing T-model, it can accurately reflect the characteristics that effect series resistance (ESR) increases of frequency at first and decreases at higher frequency. Verification with measurement data based on through glass vias (TGVs) process up to 20 GHz demonstrates excellent performance prediction.
- 4 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 32 (1) , 37-40
A T-Model With Parameter Extraction Method for Modeling 3-D Spiral Inductor
A new frequency-independent modified T-equivalent circuit for 3-D spiral inductor is proposed in this letter. Closed-form analytical expressions are proposed account for configuration and physics-based effect. Compared with double- $\pi $ model, it uses less number of elements to capture the self-resonant frequency (SRF) information. Compared with the existing T-model, it can accurately reflect the characteristics that effect series resistance (ESR) increases of frequency at first and decreases at higher frequency. Verification with measurement data based on through glass vias (TGVs) process up to 20 GHz demonstrates excellent performance prediction.
- 30 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 69 (1) , 54-64
Compact Bandpass Filter and Diplexer With Wide-Stopband Suppression Based on Balanced Substrate-Integrated Waveguide
A balanced substrate-integrated waveguide (SIW) bandpass filter (BPF) is designed and fabricated based on through-quartz-via (TQV) technologies in this article. Sixth-order filtering response centered at 41.4 GHz with equal source and load termination is achieved by the transformation of the Chebyshev polynomial. By exploiting cross-coupled resonators, the 3-dB fractional bandwidth (FBW) achieves 12.1%, and the out-of-band rejection is better than 30 dB with frequencies up to 2f₀. High CM suppression can be achieved up to 2.2f₀ with the help of two slots on the bottom metal layer. Based on the theory of the proposed SIW BPF, asymmetric diplexer with different resonance orders for two channels is studied with high isolation and wide stopband. The mixed dual-mode (TE₁₀₁ and TE₃₀₁) and single-mode (TE₁₀₁) junction resonators provide a transition between the input port and two channels. Diplexer with lower and upper channels centered at 20.2 and 37.5 GHz, respectively, is fabricated and measured to verify the proposed structure, which exhibits high isolation better than 40 dB over the whole band and a wide stopband up to 3f₀ of the lower channel. Measured results are in good agreement with the simulations.
- 30 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 69 (1) , 54-64
Compact Bandpass Filter and Diplexer With Wide-Stopband Suppression Based on Balanced Substrate-Integrated Waveguide
A balanced substrate-integrated waveguide (SIW) bandpass filter (BPF) is designed and fabricated based on through-quartz-via (TQV) technologies in this article. Sixth-order filtering response centered at 41.4 GHz with equal source and load termination is achieved by the transformation of the Chebyshev polynomial. By exploiting cross-coupled resonators, the 3-dB fractional bandwidth (FBW) achieves 12.1%, and the out-of-band rejection is better than 30 dB with frequencies up to 2f₀. High CM suppression can be achieved up to 2.2f₀ with the help of two slots on the bottom metal layer. Based on the theory of the proposed SIW BPF, asymmetric diplexer with different resonance orders for two channels is studied with high isolation and wide stopband. The mixed dual-mode (TE₁₀₁ and TE₃₀₁) and single-mode (TE₁₀₁) junction resonators provide a transition between the input port and two channels. Diplexer with lower and upper channels centered at 20.2 and 37.5 GHz, respectively, is fabricated and measured to verify the proposed structure, which exhibits high isolation better than 40 dB over the whole band and a wide stopband up to 3f₀ of the lower channel. Measured results are in good agreement with the simulations.
- 14 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (5) , 936-944
Wideband Electromagnetic Distribution Characterization and Dielectric Analysis of Shielded-Pair Through-Silicon Via Using Recursive Approximation Algorithm
The shielded-pair through-silicon vias (SPTSVs) proposed in this paper feature superior transmission properties and high jamming immunity suitable for differential-mode and common-mode transmission. Based on the recursive approximation algorithm, a novel and efficient method for characterizing the electromagnetic-temperature distribution in dielectrics are proposed for SPTSVs. In addition, considering the proximity effects and eddy current effect in substrate, the ultra-broadband parasitic admittance and electrical coupling models are derived based on two-dimensional time-varying field and transient polarization mechanism. The collaborative finite element analysis shows that the proposed model are highly agree with the 3-D full-wave simulation (HFSS 14.0 and Maxwell v16) and the analytical calculation. Then, the dielectric relaxation properties for substrate and oxide are deeply characterized with different design parameters. Finally, the impacts of the substrate effect on electrical characteristics of SPTSVs are revealed.
- 14 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (5) , 936-944
Wideband Electromagnetic Distribution Characterization and Dielectric Analysis of Shielded-Pair Through-Silicon Via Using Recursive Approximation Algorithm
The shielded-pair through-silicon vias (SPTSVs) proposed in this paper feature superior transmission properties and high jamming immunity suitable for differential-mode and common-mode transmission. Based on the recursive approximation algorithm, a novel and efficient method for characterizing the electromagnetic-temperature distribution in dielectrics are proposed for SPTSVs. In addition, considering the proximity effects and eddy current effect in substrate, the ultra-broadband parasitic admittance and electrical coupling models are derived based on two-dimensional time-varying field and transient polarization mechanism. The collaborative finite element analysis shows that the proposed model are highly agree with the 3-D full-wave simulation (HFSS 14.0 and Maxwell v16) and the analytical calculation. Then, the dielectric relaxation properties for substrate and oxide are deeply characterized with different design parameters. Finally, the impacts of the substrate effect on electrical characteristics of SPTSVs are revealed.
- 4 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 67 (2) , 738-745
Ultra-Compact TSV-Based L-C Low-Pass Filter With Stopband Up to 40 GHz for Microwave Application
- 4 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 67 (2) , 738-745
Ultra-Compact TSV-Based L-C Low-Pass Filter With Stopband Up to 40 GHz for Microwave Application
- 31 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (4) , 728-735
Wideband Substrate Integrated Waveguide Bandpass Filter Based on 3-D ICs
This paper proposes a substrate integrated waveguide bandpass filter (SIW BPF), exploiting the through-dielectric via (TDV)-based 3-D integrated circuit (3-D IC) technology. The SIW BPF is designed on the dielectric cavity that is etched on the traditional low-resistivity silicon (LRSi) in a 3-D IC system, acting as the insulating material between through-silicon via plugs and LRSi. This construction can reduce prominent eddy current losses in LRSi and coupling losses among TDV plugs for the millimeter-wave application. Benzocyclobutene and glass are chosen as the dielectric cavity due to the low dielectric constant and loss tangent. The detailed design procedure beginning from the normalized Chebyshev low-pass filter to the final optimized SIW BPF is presented. The filter having a 12.5% fractional bandwidth is centered at 159.67 GHz. The return losses and insertion loss across the passband are about -10 and -1.5 dB, respectively. Numerical analysis of the advanced design system and full-wave simulation results of Ansoft's HFSS show a good agreement.
- 31 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (4) , 728-735
Wideband Substrate Integrated Waveguide Bandpass Filter Based on 3-D ICs
This paper proposes a substrate integrated waveguide bandpass filter (SIW BPF), exploiting the through-dielectric via (TDV)-based 3-D integrated circuit (3-D IC) technology. The SIW BPF is designed on the dielectric cavity that is etched on the traditional low-resistivity silicon (LRSi) in a 3-D IC system, acting as the insulating material between through-silicon via plugs and LRSi. This construction can reduce prominent eddy current losses in LRSi and coupling losses among TDV plugs for the millimeter-wave application. Benzocyclobutene and glass are chosen as the dielectric cavity due to the low dielectric constant and loss tangent. The detailed design procedure beginning from the normalized Chebyshev low-pass filter to the final optimized SIW BPF is presented. The filter having a 12.5% fractional bandwidth is centered at 159.67 GHz. The return losses and insertion loss across the passband are about -10 and -1.5 dB, respectively. Numerical analysis of the advanced design system and full-wave simulation results of Ansoft's HFSS show a good agreement.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
A compact passive resonator based on through-silicon via technology for microwave applications
Based on the TSV technology, a compact passive resonator utilizing spiral inductor and coaxial TSV capacitor is proposed. And the compact stack configuration integrates the whole resonator in a microsize as small as 75μm×75μm. Furthermore, the adopted spiral inductor, coaxial TSV capacitor and resonator are characterized with equivalent circuit model. The transmission parameters from equivalent circuit models and HFSS simulation are matched very well. The proposed resonator exhibits an insertion loss below 1.0dB and a return loss over -20 dB at the center frequency of 2.7GHz in the passband. And the -3dB bandwidth of resonant peak in the resonant frequency span are within the range from 1.4GHz to 5.2GHz, which demonstrates the superior characteristic of the resonator.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
A compact passive resonator based on through-silicon via technology for microwave applications
Based on the TSV technology, a compact passive resonator utilizing spiral inductor and coaxial TSV capacitor is proposed. And the compact stack configuration integrates the whole resonator in a microsize as small as 75μm×75μm. Furthermore, the adopted spiral inductor, coaxial TSV capacitor and resonator are characterized with equivalent circuit model. The transmission parameters from equivalent circuit models and HFSS simulation are matched very well. The proposed resonator exhibits an insertion loss below 1.0dB and a return loss over -20 dB at the center frequency of 2.7GHz in the passband. And the -3dB bandwidth of resonant peak in the resonant frequency span are within the range from 1.4GHz to 5.2GHz, which demonstrates the superior characteristic of the resonator.
- 19 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 28 (3) , 242-244
Wideband Fourth-Harmonic Mixer Operated at 325–500 GHz
This letter presents an approach to design the fourth-harmonic mixer based on a pair of antiparallel Schottky diodes. To implement the proposed fourth-harmonic mixer, a two-level local oscillator (LO) low-pass filter is used to suppress the second, third, and fourth harmonics of the LO frequency, further to improve the isolation between RF and LO ports. Also, two shorted grounds are adopted to ensure the wideband performance of the proposed mixer. Furthermore, a wideband fourth-harmonic operating at 325-500 GHz is fabricated and measured. The results show that it has very low conversion loss from 15 to 22 dB in the whole operational band.
- 19 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 28 (3) , 242-244
Wideband Fourth-Harmonic Mixer Operated at 325–500 GHz
This letter presents an approach to design the fourth-harmonic mixer based on a pair of antiparallel Schottky diodes. To implement the proposed fourth-harmonic mixer, a two-level local oscillator (LO) low-pass filter is used to suppress the second, third, and fourth harmonics of the LO frequency, further to improve the isolation between RF and LO ports. Also, two shorted grounds are adopted to ensure the wideband performance of the proposed mixer. Furthermore, a wideband fourth-harmonic operating at 325-500 GHz is fabricated and measured. The results show that it has very low conversion loss from 15 to 22 dB in the whole operational band.
- 6 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 8 (3) , 473-481
Wideband Electromagnetic Model and Analysis of Shielded-Pair Through-Silicon Vias
The 3-D multistrata integration puts forward high requirements for signal integrity. The shielded-pair through-silicon vias (SPTSVs) proposed in this paper feature superior transmission properties and high jamming immunity suitable for differential-mode and common-mode transmission. Based on the quasi-static field theory, a wideband impedance model of SPTSVs considering the proximity effect, the line-to-line crosstalk, and the eddy current effect is derived. The parasitic parameters calculated by the impedance model are further given. The finite-element analysis shows that the proposed model highly agrees with the 3-D full-wave simulation and the analytical calculation. In addition, the characteristics of the impedance and the transmission coefficient are deeply analyzed with different design parameters. Finally, the impacts of the substrate effect and the metal-oxide-semiconductor effect on electrical characteristics of SPTSVs are revealed.
- 6 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 8 (3) , 473-481
Wideband Electromagnetic Model and Analysis of Shielded-Pair Through-Silicon Vias
The 3-D multistrata integration puts forward high requirements for signal integrity. The shielded-pair through-silicon vias (SPTSVs) proposed in this paper feature superior transmission properties and high jamming immunity suitable for differential-mode and common-mode transmission. Based on the quasi-static field theory, a wideband impedance model of SPTSVs considering the proximity effect, the line-to-line crosstalk, and the eddy current effect is derived. The parasitic parameters calculated by the impedance model are further given. The finite-element analysis shows that the proposed model highly agrees with the 3-D full-wave simulation and the analytical calculation. In addition, the characteristics of the impedance and the transmission coefficient are deeply analyzed with different design parameters. Finally, the impacts of the substrate effect and the metal-oxide-semiconductor effect on electrical characteristics of SPTSVs are revealed.
- 1 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Electrical modeling and analysis of polymer-cavity through-silicon vias
The polymer-cavity through-silicon vias (TSVs) on low resistivity silicon (LRSi) are proposed in this letter to reduce the conductive substrate losses for microwave applications, due to that the coupling loss of conventional LRSi is considerable in high speed three-dimensional integrated circuits (3-D ICs). The accurate wideband equivalent circuit model and simplified π-model are derived based on the physical design parameters, which are established by the ADS software. Well agreements between the proposed models and 3D full-wave EM field simulation of Ansoft's HFSS are shown with the operating frequencies up to 20 GHz.
- 1 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Electrical modeling and analysis of polymer-cavity through-silicon vias
The polymer-cavity through-silicon vias (TSVs) on low resistivity silicon (LRSi) are proposed in this letter to reduce the conductive substrate losses for microwave applications, due to that the coupling loss of conventional LRSi is considerable in high speed three-dimensional integrated circuits (3-D ICs). The accurate wideband equivalent circuit model and simplified π-model are derived based on the physical design parameters, which are established by the ADS software. Well agreements between the proposed models and 3D full-wave EM field simulation of Ansoft's HFSS are shown with the operating frequencies up to 20 GHz.