Dario Boote
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dario Boote has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Gianmarco Vergassola
University of Genova, Italy
10 shared publications - Tatiana Pais
Università degli Studi di Genova, Genova, Italy
3 shared publications A. Tonelli
R.I:Na. Services, Genova, Italy
1 shared publicationAngelo Tonelli
R.I.Na. Services, Genoa, Italy
1 shared publicationD. Giannarelli
Naval Architect, Italy
1 shared publicationF. Faloci
RINA S.p.A. Genova, Italy
1 shared publication
Latest Publications
- 26 November 2021
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 16 (10) , 1125-1142
Real scale measurements of yacht's mast accelerations
Dismasting is one of the most serious hazards for sailing boats. This event is mainly due to structural defects, poor maintenance or adverse weather conditions. For what the last aspect is concerned, it may be associated to two types of loads: the direct action of the wind on sails and accelerations caused by ship motions. The aim of this paper is to focus on the accelerations induced on the mast by ship motions using seakeeping analysis validated by real scale measurements carried out on two sailing yachts during their transfer trips from South Africa to Italy. After measurements, the recorded data have been analyzed, reordered and related to the weather conditions encountered during the transfer voyage. Then seakeeping calculations have been carried out in order to compare numerical prediction with experimental values. Finally, acceleration values to be considered for preliminary mast scantling, were derived.
- 26 November 2021
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 16 (10) , 1125-1142
Real scale measurements of yacht's mast accelerations
Dismasting is one of the most serious hazards for sailing boats. This event is mainly due to structural defects, poor maintenance or adverse weather conditions. For what the last aspect is concerned, it may be associated to two types of loads: the direct action of the wind on sails and accelerations caused by ship motions. The aim of this paper is to focus on the accelerations induced on the mast by ship motions using seakeeping analysis validated by real scale measurements carried out on two sailing yachts during their transfer trips from South Africa to Italy. After measurements, the recorded data have been analyzed, reordered and related to the weather conditions encountered during the transfer voyage. Then seakeeping calculations have been carried out in order to compare numerical prediction with experimental values. Finally, acceleration values to be considered for preliminary mast scantling, were derived.
- 8 July 2021
- Published by Taylor & Francis
- p. 365-372
The preliminary design of rubber mounted pillars for pleasure and passenger yachts
In this research, the Naval Section of the Department of Electrical, Electronic, Telecommunications Engineering and Naval Architecture of the University of Genoa has developed a preliminary study for the use of pillars mounted on rubber supports that should be able to accomplish their structural role and concurrently reduce the vibration transmission. In particular, in this paper, the results of static and natural mode analyses has been carried out on FE mock up models of a simplified two-deck ship structure in order to verify the impact of rubber mountings on pillars, both in the transmission of loads and vibrations.
- 8 July 2021
- Published by Taylor & Francis
- p. 365-372
The preliminary design of rubber mounted pillars for pleasure and passenger yachts
In this research, the Naval Section of the Department of Electrical, Electronic, Telecommunications Engineering and Naval Architecture of the University of Genoa has developed a preliminary study for the use of pillars mounted on rubber supports that should be able to accomplish their structural role and concurrently reduce the vibration transmission. In particular, in this paper, the results of static and natural mode analyses has been carried out on FE mock up models of a simplified two-deck ship structure in order to verify the impact of rubber mountings on pillars, both in the transmission of loads and vibrations.
- 22 March 2019
- Published by SAGE Publications in International Shipbuilding Progress
- Vol. 66 (1) , 91-110
Static and dynamic comparison of megayacht deck structure’s layouts
The growing increase in length of super and megayachts has driven structural designers to adopt longitudinal layouts as a main point in the structural scantlings. By the way, the optimization of weights, strength, deformations and dynamic behaviour h
- 22 March 2019
- Published by SAGE Publications in International Shipbuilding Progress
- Vol. 66 (1) , 91-110
Static and dynamic comparison of megayacht deck structure’s layouts
The growing increase in length of super and megayachts has driven structural designers to adopt longitudinal layouts as a main point in the structural scantlings. By the way, the optimization of weights, strength, deformations and dynamic behaviour h
- 16 November 2018
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 14 (sup1) , 1-8
Numerical and experimental comparison of the dynamic behaviour of superyacht structure
A new trend in motoryacht design is represented by Explorer vessels; as this new typology encountered a large appreciation among potential owners, many shipyards started to develop new projects in this regard. From the operative point of view the main characteristic, which differentiate Explorer vessels from traditional ones, is the higher strength required by the hull structures in order to be compliant with Ice class rules. On the other hand, in the owner’s perspective, the on-board comfort remains the driving parameter to be fulfilled. Therefore, more detailed studies on the dynamic structural behaviour, supported by experimental investigations, became mandatory. In this paper, a 40 meter ID Ice class superyacht built by Cerri Cantieri Navali (CCN), under delivery at the time being, has been elected as a study case and a comparison between experimental FE vibration analyses has been carried out during the construction period in order to validate the numerical procedure and highlight any criticisms in early design stages.
- 16 November 2018
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 14 (sup1) , 1-8
Numerical and experimental comparison of the dynamic behaviour of superyacht structure
A new trend in motoryacht design is represented by Explorer vessels; as this new typology encountered a large appreciation among potential owners, many shipyards started to develop new projects in this regard. From the operative point of view the main characteristic, which differentiate Explorer vessels from traditional ones, is the higher strength required by the hull structures in order to be compliant with Ice class rules. On the other hand, in the owner’s perspective, the on-board comfort remains the driving parameter to be fulfilled. Therefore, more detailed studies on the dynamic structural behaviour, supported by experimental investigations, became mandatory. In this paper, a 40 meter ID Ice class superyacht built by Cerri Cantieri Navali (CCN), under delivery at the time being, has been elected as a study case and a comparison between experimental FE vibration analyses has been carried out during the construction period in order to validate the numerical procedure and highlight any criticisms in early design stages.
- 18 July 2018
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 14 (3) , 281-294
Hull–furniture interaction in the primary response to global loads of a carbon fibre sailing yacht
High performance sailing yachts are generally designed assuming high local and global loads transmitted by rigs to hull structures. The above-mentioned loading conditions can become critical for large hulls also in terms of displacements when composite materials are used. In this scenario, it is very important to use lightweight and high-performance materials, such as carbon fibres. In fact, also some ‘non structural’ components, such as outfit and furniture, are built in carbon fibres and, therefore, can be considered contributing to the hull local and global strength. The aim of this work is to investigate the contribution level of those ‘non-structural’ components to the hull strength. Two different finite element models of a 94 ft sailing yacht, with and without ‘non structural components’, have been carried out in order to evaluate their contribution to the primary hull response to longitudinal bending moment and dock tuning load.
- 18 July 2018
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 14 (3) , 281-294
Hull–furniture interaction in the primary response to global loads of a carbon fibre sailing yacht
High performance sailing yachts are generally designed assuming high local and global loads transmitted by rigs to hull structures. The above-mentioned loading conditions can become critical for large hulls also in terms of displacements when composite materials are used. In this scenario, it is very important to use lightweight and high-performance materials, such as carbon fibres. In fact, also some ‘non structural’ components, such as outfit and furniture, are built in carbon fibres and, therefore, can be considered contributing to the hull local and global strength. The aim of this work is to investigate the contribution level of those ‘non-structural’ components to the hull strength. Two different finite element models of a 94 ft sailing yacht, with and without ‘non structural components’, have been carried out in order to evaluate their contribution to the primary hull response to longitudinal bending moment and dock tuning load.
- 5 January 2018
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 13 (5) , 466-475
On the damping loss factor of viscoelastic materials for naval applications
Viscoelastic materials are used in ship and yacht constructions for floating floors, engine foundations and laminated glass. The contribution of viscoelastic rubbers is related to their capability to withstand and damp airborne and structural borne noise. New regulations have outlined the necessity to perform numerical analysis in the early design stages, when modifications in the structural layout and/or in the insulation plan are more feasible and less expensive for shipyards. The determination of damping loss factor of viscoelastic materials is an open topic in vibro-acoustic engineering; the complexity of their mechanical characterisation could have consequences in terms of unreliable numerical simulations if not validated by experiments. In this paper, a new reliable and simple testing procedure for the determination of damping loss factor for viscoelastic materials is presented; experimental data have been compared with finite element analyses and statistical energy analyses in order to validate the proposed method.
- 5 January 2018
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 13 (5) , 466-475
On the damping loss factor of viscoelastic materials for naval applications
Viscoelastic materials are used in ship and yacht constructions for floating floors, engine foundations and laminated glass. The contribution of viscoelastic rubbers is related to their capability to withstand and damp airborne and structural borne noise. New regulations have outlined the necessity to perform numerical analysis in the early design stages, when modifications in the structural layout and/or in the insulation plan are more feasible and less expensive for shipyards. The determination of damping loss factor of viscoelastic materials is an open topic in vibro-acoustic engineering; the complexity of their mechanical characterisation could have consequences in terms of unreliable numerical simulations if not validated by experiments. In this paper, a new reliable and simple testing procedure for the determination of damping loss factor for viscoelastic materials is presented; experimental data have been compared with finite element analyses and statistical energy analyses in order to validate the proposed method.
- 7 December 2017
- Published by SAGE Publications in International Shipbuilding Progress
- Vol. 64 (1-2) , 25-40
On the damping coefficient of laminated glass for yacht industry
After a long period in which the most attractive characteristic of a motor yacht was represented by her maximum speed, nowadays the target has moved towards comfort on board which became the fundamental parameter to deal with in the yacht design proc
- 7 December 2017
- Published by SAGE Publications in International Shipbuilding Progress
- Vol. 64 (1-2) , 25-40
On the damping coefficient of laminated glass for yacht industry
After a long period in which the most attractive characteristic of a motor yacht was represented by her maximum speed, nowadays the target has moved towards comfort on board which became the fundamental parameter to deal with in the yacht design proc
- 1 November 2017
- Published by Elsevier in Marine Structures
- Vol. 56, 39-68
Thermal load effects on side plates of superyachts
- 1 November 2017
- Published by Elsevier in Marine Structures
- Vol. 56, 39-68
Thermal load effects on side plates of superyachts
- 30 April 2017
- Published by Praise Worthy Prize in International Review of Mechanical Engineering (IREME)
- Vol. 11 (4) , 228
Finite Element Structural Analysis of Big Yacht Superstructures
- 30 April 2017
- Published by Praise Worthy Prize in International Review of Mechanical Engineering (IREME)
- Vol. 11 (4) , 228
Finite Element Structural Analysis of Big Yacht Superstructures
- 31 January 2017
- Published by Praise Worthy Prize in International Review of Mechanical Engineering (IREME)
- Vol. 11 (1) , 1
Strength Analysis of Superyacht Superstructures with Large Openings
- 31 January 2017
- Published by Praise Worthy Prize in International Review of Mechanical Engineering (IREME)
- Vol. 11 (1) , 1
Strength Analysis of Superyacht Superstructures with Large Openings