Sidharth Sabyasachi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sidharth Sabyasachi has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Santosh Kumar Maddugari
Department of Electrical Engineering, VNIT, Nagpur, India
15 shared publications Vijay B. Borghate
Department of Electrical Engineering, Visvesvaraya National Institute of Technology (V.N.I.T.), Nagpur, Maharashtra 440010, India
11 shared publications- Raghavendra Reddy Karasani
Electrical and Electronics Engineering, Sreenidhi Institute of Science and Technology, 231942 Hyderabad, Telangana India
9 shared publications - Vijay. B. Borghate
Department of Electrical Engineering, Visvesvaraya National Institute of Technology, Nagpur, India
6 shared publications - Prafullachandra Madhukar Meshram
Yeshwantrao Chavan College of Engineering
3 shared publications Datta Ambhore
Department of Electrical Engineering, Visvesvaraya National Institute of Technology, Nagpur, India
2 shared publications
Latest Publications
- Open Access
- 19 March 2024
- Published by Elsevier in Alexandria Engineering Journal
- Vol. 93, 236-258
Reimagining E-mobility: A holistic business model for the electric vehicle charging ecosystem
- 19 March 2024
- Published by Elsevier in Alexandria Engineering Journal
- Vol. 93, 236-258
Open AccessReimagining E-mobility: A holistic business model for the electric vehicle charging ecosystem
- 1 January 2020
- Published by BioAxis DNA Research Centre in HELIX
- Vol. 10 (2) , 38-42
Review on Solar PV Application Oriented Multilevel Inverters
- 1 January 2020
- Published by BioAxis DNA Research Centre in HELIX
- Vol. 10 (2) , 38-42
Review on Solar PV Application Oriented Multilevel Inverters
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 4947-4952
A 13-Level Hybrid Multilevel Inverter Topology by Combining ANPC and Improved H-Bridge
The research on multilevel inverter has created a milestone due to its wide application areas starting from industries to smart grid systems. Due to the increase of power demands, the importance of inverters increases in the microgrids and standalone systems. This paper presents a single phase hybrid cascaded structure of active neutral point clamped converter with modified H-bridge multilevel inverter. The five level active neutral point clamped converter is cascaded with nine level modified H-bridge to generate 13 level output voltage. This combinational structure reduces some source count by maintaining higher voltage levels. The mathematical analysis is provided with the simulation and experimental results for validation of the topology. The symmetrical source configuration is implemented for the voltage level generation. The series combination of resistive - inductive is considered in the load side. This structure is well suited for the PV applications where the inverter structure can be cascaded for increased power level.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 4947-4952
A 13-Level Hybrid Multilevel Inverter Topology by Combining ANPC and Improved H-Bridge
The research on multilevel inverter has created a milestone due to its wide application areas starting from industries to smart grid systems. Due to the increase of power demands, the importance of inverters increases in the microgrids and standalone systems. This paper presents a single phase hybrid cascaded structure of active neutral point clamped converter with modified H-bridge multilevel inverter. The five level active neutral point clamped converter is cascaded with nine level modified H-bridge to generate 13 level output voltage. This combinational structure reduces some source count by maintaining higher voltage levels. The mathematical analysis is provided with the simulation and experimental results for validation of the topology. The symmetrical source configuration is implemented for the voltage level generation. The series combination of resistive - inductive is considered in the load side. This structure is well suited for the PV applications where the inverter structure can be cascaded for increased power level.
- Open Access
- 1 April 2019
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 12 (4) , 729-738
Step‐wise design procedure for a single‐phase multilevel inverter topology for different voltage level generation
This study proposes a step‐wise design procedure for development of a single‐phase multilevel inverter topology. It is started with a module consisting of a single switch and single source. The number of switches and sources is gradually added in the module to increase the number of levels and quality of the output voltage. Each step is theoretically analysed and experimentally verified. These developed modules are used as a part of the inverter to get the bipolar load voltage with or without H‐bridge. Each developed inverter topology differs from each other depending on the number of switches, sources and configuration of sources involved in the structure. The use of inverters, with cascaded modules, can be extended for medium‐to‐high‐power applications. The theoretical analysis of one of the developed topology is explained and simulated in MATLAB/Simulink environment. Its performance is compared with some of the existing topologies to show the difference. The hardware setup is built in the laboratory for practical validation of the proposed topology. The nearest level control modulation scheme is used in both simulation and experimentation.
- 1 April 2019
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 12 (4) , 729-738
Open AccessStep‐wise design procedure for a single‐phase multilevel inverter topology for different voltage level generation
This study proposes a step‐wise design procedure for development of a single‐phase multilevel inverter topology. It is started with a module consisting of a single switch and single source. The number of switches and sources is gradually added in the module to increase the number of levels and quality of the output voltage. Each step is theoretically analysed and experimentally verified. These developed modules are used as a part of the inverter to get the bipolar load voltage with or without H‐bridge. Each developed inverter topology differs from each other depending on the number of switches, sources and configuration of sources involved in the structure. The use of inverters, with cascaded modules, can be extended for medium‐to‐high‐power applications. The theoretical analysis of one of the developed topology is explained and simulated in MATLAB/Simulink environment. Its performance is compared with some of the existing topologies to show the difference. The hardware setup is built in the laboratory for practical validation of the proposed topology. The nearest level control modulation scheme is used in both simulation and experimentation.
- 7 March 2019
- Published by World Scientific Pub Co Pte Ltd in Journal of Circuits, Systems and Computers
- Vol. 29 (01)
A 21-Level Bipolar Single-Phase Modular Multilevel Inverter
This paper presents a module for single-phase multilevel inverter topology. The proposed module generates maximum 21-level bipolar output voltage with asymmetric sources without H-bridge. This results in reduction in filter cost and size. The module can be cascaded for high voltage applications. The same arrangement of voltage source magnitudes in first module is maintained in the remaining cascaded modules. The proposed topology is suitable for the applications like electric vehicle and emergency services like residences and hospitality industries, etc. A set of comparisons between the proposed and recently published topologies are provided to differentiate between them. The topology is simulated and verified in MATLAB/SIMULINK. A hardware prototype is developed in the laboratory for experimental confirmation with various conditions.
- 7 March 2019
- Published by World Scientific Pub Co Pte Ltd in Journal of Circuits, Systems and Computers
- Vol. 29 (01)
A 21-Level Bipolar Single-Phase Modular Multilevel Inverter
This paper presents a module for single-phase multilevel inverter topology. The proposed module generates maximum 21-level bipolar output voltage with asymmetric sources without H-bridge. This results in reduction in filter cost and size. The module can be cascaded for high voltage applications. The same arrangement of voltage source magnitudes in first module is maintained in the remaining cascaded modules. The proposed topology is suitable for the applications like electric vehicle and emergency services like residences and hospitality industries, etc. A set of comparisons between the proposed and recently published topologies are provided to differentiate between them. The topology is simulated and verified in MATLAB/SIMULINK. A hardware prototype is developed in the laboratory for experimental confirmation with various conditions.
- 27 February 2019
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 47 (5) , 718-737
A reliable and efficient single‐phase modular multilevel inverter topology
Summary: Bilevel inverters are replaced by multilevel inverters due to their capability of producing quality output voltage with low total harmonic distortion (THD). On the contrary, increase in number of semiconductor switches has questioned the reliability of the multilevel inverter topologies. To enhance the reliability, this paper proposes a single‐phase five‐level inverter topology with inherent fault‐tolerant feature. The proposed inverter can sustain faults in sources and semiconductor switches by amending the switching combinations. No healthy switch is needed to be bypassed during the fault to ensure the optimum utilization of the switches. An analysis on the basis of reliability, cost, and efficiency is carried out of the proposed inverter and compared with the existing topologies. To prove the claim, the experimental results of the developed hardware model is analyzed and compared with the simulation results of MATLAB/SIMULINK.
- 27 February 2019
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 47 (5) , 718-737
A reliable and efficient single‐phase modular multilevel inverter topology
Summary: Bilevel inverters are replaced by multilevel inverters due to their capability of producing quality output voltage with low total harmonic distortion (THD). On the contrary, increase in number of semiconductor switches has questioned the reliability of the multilevel inverter topologies. To enhance the reliability, this paper proposes a single‐phase five‐level inverter topology with inherent fault‐tolerant feature. The proposed inverter can sustain faults in sources and semiconductor switches by amending the switching combinations. No healthy switch is needed to be bypassed during the fault to ensure the optimum utilization of the switches. An analysis on the basis of reliability, cost, and efficiency is carried out of the proposed inverter and compared with the existing topologies. To prove the claim, the experimental results of the developed hardware model is analyzed and compared with the simulation results of MATLAB/SIMULINK.
- 22 February 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 55 (3) , 2964-2972
A Linear-Generator-Based Wave Power Plant Model Using Reliable Multilevel Inverter
The huge untapped energy from ocean waves is one of the ideal solution for world energy crisis. This paper proposes a linear generator based direct power conversion plant model to generate the electrical energy from ocean waves. The linear generator output is of variable magnitude and variable frequency in nature. In this work, this variable output is converted to fixed DC voltage by using diode bridge rectifier and DC-link capacitor. The linear generator along with diode bridge and capacitor forms a wave power unit. These wave power units can be connected in series and parallel to meet the power ratings. A reliable multilevel inverter is fed from the wave power units to ensure uninterrupted tapping of power from this abundant renewable energy source. The reliable inverter operation is analyzed under open/short circuit faults in switches by reconfiguring the carrier waves of sine pulse width modulation (SPWM) during fault conditions. A fault detection algorithm using a single sensor at the output is also proposed to detect the faults in the switches of the proposed reliable inverter. The proposed plant model with linear generator and reliable inverter is simulated using ANSYS MAXWELL and MATLAB/SIMULINK. The plant model is tested using a programmable AC source for emulating the linear generator and developed prototype of diode bridge rectifier and reliable multilevel inverter.
- 22 February 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 55 (3) , 2964-2972
A Linear-Generator-Based Wave Power Plant Model Using Reliable Multilevel Inverter
The huge untapped energy from ocean waves is one of the ideal solution for world energy crisis. This paper proposes a linear generator based direct power conversion plant model to generate the electrical energy from ocean waves. The linear generator output is of variable magnitude and variable frequency in nature. In this work, this variable output is converted to fixed DC voltage by using diode bridge rectifier and DC-link capacitor. The linear generator along with diode bridge and capacitor forms a wave power unit. These wave power units can be connected in series and parallel to meet the power ratings. A reliable multilevel inverter is fed from the wave power units to ensure uninterrupted tapping of power from this abundant renewable energy source. The reliable inverter operation is analyzed under open/short circuit faults in switches by reconfiguring the carrier waves of sine pulse width modulation (SPWM) during fault conditions. A fault detection algorithm using a single sensor at the output is also proposed to detect the faults in the switches of the proposed reliable inverter. The proposed plant model with linear generator and reliable inverter is simulated using ANSYS MAXWELL and MATLAB/SIMULINK. The plant model is tested using a programmable AC source for emulating the linear generator and developed prototype of diode bridge rectifier and reliable multilevel inverter.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Simple Fault Tolerant Multilevel Inverter Topology
This paper proposes a fault tolerant seven level inverter topology. The operation of the inverter when one or more switches are faulted is presented in this paper. In case of any fault in the switches the power output is ensured though at reduced number of voltage levels, which increases the reliability of the system. The redundant switching states enables fault tolerant operation of the inverter. In case of faults in the bidirectional switches the power output along with the voltage levels is maintained. The proposed system is simulated in MATLAB/Simulink.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Simple Fault Tolerant Multilevel Inverter Topology
This paper proposes a fault tolerant seven level inverter topology. The operation of the inverter when one or more switches are faulted is presented in this paper. In case of any fault in the switches the power output is ensured though at reduced number of voltage levels, which increases the reliability of the system. The redundant switching states enables fault tolerant operation of the inverter. In case of faults in the bidirectional switches the power output along with the voltage levels is maintained. The proposed system is simulated in MATLAB/Simulink.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Generalized Fault Tolerant Multilevel Inverter for Switch Open-Circuit Faults
This paper presents a multilevel inverter (MLI) with fault tolerant capability for an open-circuit fault in any switch. The proposed inverter with six uni-directional switches and one bi-directional switch delivers 5-levels and 7-levels in symmetrical and asymmetrical configurations, respectively. The redundant states in the inverter are used to isolate the faulty switch. In symmetrical configuration, the output levels fall from 5-levels to 3-levels for an open-circuit fault in any uni-directional switch of the inverter. The output levels remain unaffected for an open-circuit fault in bi-directional switch of the inverter. A hardware setup is developed to validate the performance of the proposed inverter with simulations performed in MATLAB/SIMULINK.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Generalized Fault Tolerant Multilevel Inverter for Switch Open-Circuit Faults
This paper presents a multilevel inverter (MLI) with fault tolerant capability for an open-circuit fault in any switch. The proposed inverter with six uni-directional switches and one bi-directional switch delivers 5-levels and 7-levels in symmetrical and asymmetrical configurations, respectively. The redundant states in the inverter are used to isolate the faulty switch. In symmetrical configuration, the output levels fall from 5-levels to 3-levels for an open-circuit fault in any uni-directional switch of the inverter. The output levels remain unaffected for an open-circuit fault in bi-directional switch of the inverter. A hardware setup is developed to validate the performance of the proposed inverter with simulations performed in MATLAB/SIMULINK.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Hybrid SPWM Techniques for Five Level Cascaded H-Bridge Inverter
Pulse width modulation (PWM) is basis of operation of an inverter. This paper proposes various hybrid PWM techniques based on sine pulse width modulation (SPWM) for multilevel inverter. The top and bottom most carriers in case of hybrid SPWM (HSPWM1) are considered to be a rectified sine signals which are compared with a sinusoidal reference of fundamental frequency. In HSPWM2 the inverted rectified sine waves are considered in place of rectified sine waves from HSPWM1. A comparative study between conventional SPWM, HSPWM1 and HSPWM2 in terms of fundamental RMS voltage and THD is performed. It is evident that HSPWM2 has minimum THD and more fundamental voltage compared to conventional SPWM.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Hybrid SPWM Techniques for Five Level Cascaded H-Bridge Inverter
Pulse width modulation (PWM) is basis of operation of an inverter. This paper proposes various hybrid PWM techniques based on sine pulse width modulation (SPWM) for multilevel inverter. The top and bottom most carriers in case of hybrid SPWM (HSPWM1) are considered to be a rectified sine signals which are compared with a sinusoidal reference of fundamental frequency. In HSPWM2 the inverted rectified sine waves are considered in place of rectified sine waves from HSPWM1. A comparative study between conventional SPWM, HSPWM1 and HSPWM2 in terms of fundamental RMS voltage and THD is performed. It is evident that HSPWM2 has minimum THD and more fundamental voltage compared to conventional SPWM.