CWChen Wang

Chen Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chen Wang has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Dustiness of graphene and graphite

    by Douglas E. Evans, M. Christina Kander, Chen Wang, Peter B. Shaw, Seth McCormick, Kabir Rishi, Terrence S. Kuca, Derek E. Stinson, Gregory J. Deye, Matthew M. Dahm

    Graphene is one of the most utilized nanoscale materials in the United States (Lee et al. 2016; Babik et al. 2018; Mbayachi et al. 2021; McCormick et al. 2021). Nanomaterials, nano-objects and nano...


  • Evaluating occupational exposures to the graphene family of nanomaterials: Implications for worker safety and health

    by Matthew M. Dahm, Seth McCormick, Mamadou Niang, Brian Christensen, Chen Wang, I-Chen Chen

    Graphene is a two-dimensional (2-D), carbon-based, nanomaterial that demonstrates exceptional physical and chemical properties such as electrical conductivity, mechanical strength, and thermal stab...


  • Investigation of particle size-related artifacts in analyte quantification of particulate samples using infrared spectroscopy methods

    by Kabir Rishi, Orthodoxia Zervaki, Bon-Ki Ku, Nicholas Pugh, Chen Wang, Vasileia Vogiazi, Pramod Kulkarni

  • Compatibility of engineered stone materials with tetrahydrofuran processing for crystalline silica analysis by XRD

    by Chen Wang, Kabir Rishi, Bon Ki Ku, Pramod Kulkarni, Drew Thompson, Chaolong Qi

    This study investigated the compatibility of Tetrahydrofuran (THF) dissolution, following the procedures outlined in NIOSH Method 7500 and the similar OSHA ID-142 method, as a sample preparation technique for respirable crystalline silica (RCS) analysis in engineered stone materials compared to the muffle furnace (MF) ashing method. Our results revealed considerable variability in RCS content across different batches of engineered stone tested, underscoring the inherent material heterogeneity in engineered stone products. A statistically significant underestimation of RCS concentrations was observed when using THF dissolution for Stone A (polyester-based) samples collected on 47 mm polyvinyl chloride (PVC) filters, particularly at lower analyte loadings. In contrast, no statistically significant differences in RCS measurement were found between THF dissolution and MF ashing for the other 3 stone types, including one laboratory-synthetic material. The observed discrepancy in Stone A is likely attributed to the interaction of THF with its polyester resin binder, leading to swelling of the filter matrix and forming a non-volatile residue. This residue may physically entrap silica particles, hindering their complete recovery and subsequent quantification by X-ray diffraction (XRD). The suitability of THF processing as a sample preparation method is therefore highly dependent on the specific composition of the engineered stone. Based on these findings, MF ashing is recommended as the more reliable and universally applicable sample preparation method for engineered stone samples, especially those containing polyester resin binders. Caution should be exercised when considering THF dissolution for RCS analysis in engineered stones due to the potential for significant underestimation of actual RCS values, which could have implications for exposure assessments and regulatory compliance.

  • Open Access

    Release of Crystalline Silica Nanoparticles during Engineered Stone Fabrication

    by Kabir Rishi, Bon Ki Ku, Chaolong Qi, Drew Thompson, Chen Wang, Alan Dozier, Vasileia Vogiazi, Orthodoxia Zervaki, Pramod Kulkarni

    Inhalation exposure to respirable crystalline silica (RCS) during the fabrication of engineered stone-based kitchen countertops has been on the rise in recent years and has become a significant occupational health problem in the United States and globally. Little is known about the presence of nanocrystalline silica (NCS), i.e., particles below 100 nm. We present a methodology to quantify the crystalline silica content in the sub-100 nm size fraction of the aerosol released during engineered stone fabrication using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. Aerosol was generated in a test chamber designed per EN 1093-3 and sampled using cascade impactors. XRD and FTIR analysis showed the presence of both α-quartz (15-60%) and cristobalite (10-50%) polymorphs in all size fractions. With increasing particle size, the cristobalite content increased. Seventy percent of the total aerosol mass in the sub-100 nm fraction was found to be crystalline silica, qualitatively confirmed by electron diffraction and electron energy loss spectroscopy. The presence of other minerals was detected in all size fractions; no polymeric resin binder was detected in the sub-100 nm fraction. Although the sub-100 nm fraction was about 1% of the aerosol mass, it accounted for 4-24% of the aerosol surface area based on the total lung deposition. If the surface area is a more relevant exposure metric, the assessment of the efficacy of current engineering control systems using mass as an exposure metric may not provide adequate protection.


  • Open Access

    Direct-On-Filter Analysis of Airborne Engineered Nanomaterials using Correlative Microscopy and Spectroscopy

    by Jianqi Wang, Chen Wang, Kabir Rishi, Vasileia Vogiazi

    Engineered nanomaterials (ENMs) are used in a wide variety of applications especially high-performance products for aerospace, automobiles, sports equipment, and construction. The toxicity and adverse health effects of ENMs are likely a multifaceted function of their particle physical, chemical, and surface properties. Specific morphologies and spectroscopic features of airborne ENMs have been used as fingerprints for identifying materials and quantifying their exposures in occupational settings [ 1, 2]. Scanning Electron microscopy (SEM) is known for its capabilities for conducting size-specific measurements in micro and nanoscales and elemental determination by using Energy Dispersive Spectroscopy (EDS). With Raman becoming an important analytical tool for aerosol characterization [ 1] and recent development of Optical Photothermal Infrared (O-PTIR) spectroscopy [ 3], there’s a growing need to combine these structural and micro-molecular techniques with conventional surface imaging and elemental analysis performed by using SEM-EDS. Images and spectroscopic information obtained from different scales across multiple instruments are often very complementary for correlative measurements of the same regions of interest (ROI). However, achieving high accuracy and simplicity of co-localized observation across different instruments has been a key challenge.


  • Open Access

    Revealing the structural and chemical properties of copper-based nanoparticles released from copper treated wood

    by Chen Wang, Chaolong Qi

    Copper-based preservatives consisting of micronized and nanoscale copper particles have been widely used in applications for wood protection. The widespread use of these preservatives along with the potential release of copper-containing nanoparticles (Cu NPs) during the life cycle of treated wood, has raised concerns over the impacts on the environment and occupational exposure. Along with assessing the potential hazards of these materials, a critical step is determining the chemical and morphological characteristics of the copper species released from copper-treated wood. Therefore, a combination of scanning transmission electron microscopy (STEM) and electron energy-loss spectroscopy (EELS) was utilized to characterize and differentiate the released copper-containing particles based on their structures, sizing, and chemical properties. Airborne wood dust samples were collected during the abrasion and sawing of micronized copper (MC) treated wood in a laboratory testing system. Based on the signature Cu L2,3 edge of EEL spectra, three different copper species (i.e., basic copper carbonate, copper, and copper–wood complex) were identified as major components of the embedded particles in wood dust. In addition, two types of individual Cu NPs consisting of basic copper carbonate and copper were identified. The variation of morphologies and chemical properties of copper-containing particles indicates the importance of copper–wood interactions to determine the formation and distribution of copper species in wood components. Our findings will advance the fundamental understanding of their released forms, potential transformation, and environmental fate during the life cycle.


  • Open Access

    Hierarchically Structured Classification of Carbon Nanostructures from TEM Images by Machine Learning and Computer Vision

    by Chen Wang, Qixiang Luo, Elizabeth Holm

    Hierarchically Structured Classification of Carbon Nanostructures from TEM Images by Machine Learning and Computer Vision - Volume 27 Issue S1


  • Open Access

    A transfer learning approach for improved classification of carbon nanomaterials from TEM images

    by Qixiang Luo, Elizabeth A. Holm, Chen Wang

    The extensive use of carbon nanomaterials such as carbon nanotubes/nanofibers (CNTs/CNFs) in industrial settings has raised concerns over the potential health risks associated with occupational exposure to these materials. These exposures are commonly in the form of CNT/CNF-containing aerosols, resulting in a need for a reliable structure classification protocol to perform meaningful exposure assessments. However, airborne carbonaceous nanomaterials are very likely to form mixtures of individual nano-sized particles and micron-sized agglomerates with complex structures and irregular shapes, making structure identification and classification extremely difficult. While manual classification from transmission electron microscopy (TEM) images is widely used, it is time-consuming due to the lack of automation tools for structure identification. In the present study, we applied a convolutional neural network (CNN) based machine learning and computer vision method to recognize and classify airborne CNT/CNF particles from TEM images. We introduced a transfer learning approach to represent images by hypercolumn vectors, which were clustered via K-means and processed into a Vector of Locally Aggregated Descriptors (VLAD) representation to train a softmax classifier with the gradient boosting algorithm. This method achieved 90.9% accuracy on the classification of a 4-class dataset and 84.5% accuracy on a more complex 8-class dataset. The developed model established a framework to automatically detect and classify complex carbon nanostructures with potential applications that extend to the automated structural classification for other nanomaterials.