Sean Walton
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sean Walton has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Ben Evans
Swansea University
8 shared publications O. Hassan
6 shared publicationsK. Morgan
4 shared publications- Martyn Rowan Brown
Swansea University
4 shared publications - Alma Rahat
Loughborough University
3 shared publications - Jakub Vincalek
Computational Foundry, Faculty of Science and Engineering, Swansea University, Wales, UK
3 shared publications
Latest Publications
- Open Access
- 10 July 2026
- Published by Association for Computing Machinery (ACM)
- p. 1047-1055
Robust Evolutionary Optimization for Demand-Balanced Railway Route Design
- 10 July 2026
- Published by Association for Computing Machinery (ACM)
- p. 1047-1055
Open AccessRobust Evolutionary Optimization for Demand-Balanced Railway Route Design
- Open Access
- 9 January 2026
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Interactive Intelligent Systems
- Vol. 16 (1) , 1-31
From Metrics to Meaning: Time to Rethink Evaluation in Human–AI Collaborative Design
As AI systems increasingly shape decision-making in creative design contexts, understanding how humans engage with these tools has become a critical challenge for interactive intelligent systems research. This article contributes a challenge to rethink how to evaluate human–AI collaborative systems, advocating for a more nuanced and multidimensional approach. Findings from one of the largest field studies to date ( n = 808) of a human–AI co-creative system, The Genetic Car Designer, complemented by a controlled lab study ( n = 12), are presented. The system is based on an interactive evolutionary algorithm where participants were tasked with designing a simple 2D representation of a car. Participants were exposed to galleries of design suggestions generated by an intelligent system, MAP–Elites, and a random control. Results indicate that exposure to galleries generated by MAP–Elites significantly enhanced both cognitive and behavioral engagement, leading to higher-quality design outcomes. Crucially for the wider community, the analysis reveals that conventional evaluation methods, which often focus on solely behavioral and design quality metrics, fail to capture the full spectrum of user engagement. By considering the human–AI design process as a changing emotional, behavioral, and cognitive state of the designer, we propose evaluating human–AI systems holistically and considering intelligent systems as a core part of the user experience—not simply a back-end tool.
- 9 January 2026
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Interactive Intelligent Systems
- Vol. 16 (1) , 1-31
Open AccessFrom Metrics to Meaning: Time to Rethink Evaluation in Human–AI Collaborative Design
As AI systems increasingly shape decision-making in creative design contexts, understanding how humans engage with these tools has become a critical challenge for interactive intelligent systems research. This article contributes a challenge to rethink how to evaluate human–AI collaborative systems, advocating for a more nuanced and multidimensional approach. Findings from one of the largest field studies to date ( n = 808) of a human–AI co-creative system, The Genetic Car Designer, complemented by a controlled lab study ( n = 12), are presented. The system is based on an interactive evolutionary algorithm where participants were tasked with designing a simple 2D representation of a car. Participants were exposed to galleries of design suggestions generated by an intelligent system, MAP–Elites, and a random control. Results indicate that exposure to galleries generated by MAP–Elites significantly enhanced both cognitive and behavioral engagement, leading to higher-quality design outcomes. Crucially for the wider community, the analysis reveals that conventional evaluation methods, which often focus on solely behavioral and design quality metrics, fail to capture the full spectrum of user engagement. By considering the human–AI design process as a changing emotional, behavioral, and cognitive state of the designer, we propose evaluating human–AI systems holistically and considering intelligent systems as a core part of the user experience—not simply a back-end tool.
- Open Access
- 14 July 2025
- Published by Association for Computing Machinery (ACM)
- p. 2491-2495
A Novel Mesh Deformation Methodology for Computational Aerodynamic Shape Optimisation
- 14 July 2025
- Published by Association for Computing Machinery (ACM)
- p. 2491-2495
Open AccessA Novel Mesh Deformation Methodology for Computational Aerodynamic Shape Optimisation
- Open Access
A Mesh-Based Approach for Computational Fluid Dynamics-Free Aerodynamic Optimisation of Complex Geometries Using Area Ruling
In this paper, an optimisation procedure is introduced that uses a significantly cheaper, and CFD-free, objective function for aerodynamic optimisation than conventional CFD-driven approaches. Despite the reduced computational cost, we show that this approach can still drive the optimisation scheme towards a design with a similar reduction in drag coefficient for wave drag-dominated problems. The approach used is ‘CFD-free’, i.e., it does not require any computational aerodynamic analysis. It can be applied to geometries discretised using meshes more conventionally used for ‘standard’ CFD-based optimisation approaches. The approach outlined in this paper makes use of the transonic area rule and its supersonic extension, exploiting a mesh-based parameterisation and mesh morphing methodology. The paper addresses the following question: ‘To what extent can an optimiser perform (wave) drag minimisation if using ‘area ruling’ alone as the objective (fitness) function measurement?’. A summary of the wave drag approximation in transonic and supersonic regimes is outlined along with the methodology for exploiting this theory on a typical CFD surface mesh to construct an objective function evaluation for a given geometry. The implementation is presented including notes on the considerations required to ensure stability, and error minimisation, of the numerical scheme. The paper concludes with the results from a number of (simple and complex geometry) examples of a drag-minimisation optimisation study and the results are compared with an approach using full-fidelity CFD simulation. The overall conclusions from this study suggest that the approach presented is capable of driving a geometry towards a similar shape to when using full-fidelity CFD at a significantly lower computational cost. However, it cannot account for any constraints, driven by other aerodynamic factors, that might be present within the problem.
Open AccessA Mesh-Based Approach for Computational Fluid Dynamics-Free Aerodynamic Optimisation of Complex Geometries Using Area Ruling
In this paper, an optimisation procedure is introduced that uses a significantly cheaper, and CFD-free, objective function for aerodynamic optimisation than conventional CFD-driven approaches. Despite the reduced computational cost, we show that this approach can still drive the optimisation scheme towards a design with a similar reduction in drag coefficient for wave drag-dominated problems. The approach used is ‘CFD-free’, i.e., it does not require any computational aerodynamic analysis. It can be applied to geometries discretised using meshes more conventionally used for ‘standard’ CFD-based optimisation approaches. The approach outlined in this paper makes use of the transonic area rule and its supersonic extension, exploiting a mesh-based parameterisation and mesh morphing methodology. The paper addresses the following question: ‘To what extent can an optimiser perform (wave) drag minimisation if using ‘area ruling’ alone as the objective (fitness) function measurement?’. A summary of the wave drag approximation in transonic and supersonic regimes is outlined along with the methodology for exploiting this theory on a typical CFD surface mesh to construct an objective function evaluation for a given geometry. The implementation is presented including notes on the considerations required to ensure stability, and error minimisation, of the numerical scheme. The paper concludes with the results from a number of (simple and complex geometry) examples of a drag-minimisation optimisation study and the results are compared with an approach using full-fidelity CFD simulation. The overall conclusions from this study suggest that the approach presented is capable of driving a geometry towards a similar shape to when using full-fidelity CFD at a significantly lower computational cost. However, it cannot account for any constraints, driven by other aerodynamic factors, that might be present within the problem.
- Open Access
- 19 April 2023
- Published by Springer Nature in Engineering with Computers
- Vol. 39 (6) , 3835-3846
Evaluating the effect of a ducted winglet on the induced drag of wind turbine blade using CFD and Trefftz plane analysis
A novel patented ducted winglet design is compared, using numerical simulations, to an unmodified wing tip and a standard winglet in the context of a wind turbine blade. The aim of the ducted winglet is to reduce the induced drag. This reduction of induced drag, at the wing tip, would be particularly beneficial to wind turbine performance. Throughout the comparison, we explore the aerodynamic phenomena described in the patent which claim to explain how the ducted winglet reduces induced drag. The simulations were run using a CFD solver, FLITE3D, that has been thoroughly validated on industrial scale aerodynamic problems. A mesh convergence study was carried out to ensure that the results have sufficient numerical accuracy for a consistent ranking with respect to the lift-to-drag ratio. A Trefftz plane analysis is conducted to measure the effect of the duct on induced drag. To the best of our knowledge, this is the first time that such a ducted design is tested in this context and compared to a standard unmodified blade and winglet. We found that the ducted winglet has a higher lift-to-drag ratio than an unmodified wing tip, but lower than a non-ducted winglet. Despite this, there is clear evidence that the duct had a positive influence on the induced drag. Our results show that with future optimisation this ducted winglet may prove beneficial to wind turbine design.
- 19 April 2023
- Published by Springer Nature in Engineering with Computers
- Vol. 39 (6) , 3835-3846
Open AccessEvaluating the effect of a ducted winglet on the induced drag of wind turbine blade using CFD and Trefftz plane analysis
A novel patented ducted winglet design is compared, using numerical simulations, to an unmodified wing tip and a standard winglet in the context of a wind turbine blade. The aim of the ducted winglet is to reduce the induced drag. This reduction of induced drag, at the wing tip, would be particularly beneficial to wind turbine performance. Throughout the comparison, we explore the aerodynamic phenomena described in the patent which claim to explain how the ducted winglet reduces induced drag. The simulations were run using a CFD solver, FLITE3D, that has been thoroughly validated on industrial scale aerodynamic problems. A mesh convergence study was carried out to ensure that the results have sufficient numerical accuracy for a consistent ranking with respect to the lift-to-drag ratio. A Trefftz plane analysis is conducted to measure the effect of the duct on induced drag. To the best of our knowledge, this is the first time that such a ducted design is tested in this context and compared to a standard unmodified blade and winglet. We found that the ducted winglet has a higher lift-to-drag ratio than an unmodified wing tip, but lower than a non-ducted winglet. Despite this, there is clear evidence that the duct had a positive influence on the induced drag. Our results show that with future optimisation this ducted winglet may prove beneficial to wind turbine design.
- Open Access
- 17 August 2022
- Published by Elsevier in Computers and Education Open
- Vol. 3
A critical outlook at augmented reality and its adoption in education
- 17 August 2022
- Published by Elsevier in Computers and Education Open
- Vol. 3
Open AccessA critical outlook at augmented reality and its adoption in education
- Open Access
- 16 August 2022
- Published by Frontiers Media SA in Frontiers for Young Minds
- Vol. 10
How Engineers Use Evolution to Invent Things
You may have heard of evolution in terms of plants and animals, but did you know that this natural process can also be used by engineers to invent things? Animals and plants have evolved in amazing ways to survive in their environments. Biologists have been investigating how evolution works for a long time. Mathematicians and computer scientists have worked alongside biologists to create computer programs that can evolve designs, to help engineers invent things. These are called evolutionary optimization algorithms, and they can be used to evolve faster airplanes, stronger bridges, or even better video games. In this article, we will explain how these algorithms work and what their strong and weak points are.
- 16 August 2022
- Published by Frontiers Media SA in Frontiers for Young Minds
- Vol. 10
Open AccessHow Engineers Use Evolution to Invent Things
You may have heard of evolution in terms of plants and animals, but did you know that this natural process can also be used by engineers to invent things? Animals and plants have evolved in amazing ways to survive in their environments. Biologists have been investigating how evolution works for a long time. Mathematicians and computer scientists have worked alongside biologists to create computer programs that can evolve designs, to help engineers invent things. These are called evolutionary optimization algorithms, and they can be used to evolve faster airplanes, stronger bridges, or even better video games. In this article, we will explain how these algorithms work and what their strong and weak points are.
- 3 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Games
- Vol. 14 (3) , 413-422
Evaluating Mixed-Initiative Procedural Level Design Tools Using a Triple-Blind Mixed-Method User Study
Results from a triple-blind mixed-method user study into the effectiveness of mixed-initiative tools for the procedural generation of game levels are presented. A tool which generates levels using interactive evolutionary optimisation was designed for this study which (a) is focused on supporting the designer to explore the design space and (b) only requires the designer to interact with it by designing levels. The tool identifies level design patterns in an initial hand-designed map and uses that information to drive an interactive optimisation algorithm. A rigorous user study was designed which compared the experiences of designers using the mixed-initiative tool to designers who were given a tool which provided completely random level suggestions. The designers using the mixed-initiative tool showed an increased engagement in the level design task, reporting that it was effective in inspiring new ideas and design directions. This provides significant evidence that procedural content generation can be used as a powerful tool to support the human design process.
- 3 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Games
- Vol. 14 (3) , 413-422
Evaluating Mixed-Initiative Procedural Level Design Tools Using a Triple-Blind Mixed-Method User Study
Results from a triple-blind mixed-method user study into the effectiveness of mixed-initiative tools for the procedural generation of game levels are presented. A tool which generates levels using interactive evolutionary optimisation was designed for this study which (a) is focused on supporting the designer to explore the design space and (b) only requires the designer to interact with it by designing levels. The tool identifies level design patterns in an initial hand-designed map and uses that information to drive an interactive optimisation algorithm. A rigorous user study was designed which compared the experiences of designers using the mixed-initiative tool to designers who were given a tool which provided completely random level suggestions. The designers using the mixed-initiative tool showed an increased engagement in the level design task, reporting that it was effective in inspiring new ideas and design directions. This provides significant evidence that procedural content generation can be used as a powerful tool to support the human design process.
- Open Access
- 1 January 2021
- Published by Taylor & Francis in Cogent Engineering
- Vol. 8 (1)
A user-centered approach to evolutionary algorithms and their use in industry
The key contribution of this article to the domain of engineering optimisation is establishing best practices with respect to the development of evolutionary algorithms in the context of design engineering. Despite their various uses, the uptake of evolutionary algorithms in industry remains limited. In order to understand why uptake is low a survey of engineers was undertaken, the results of which are presented here. A total of 23 participants (N = 23) took part in the 3-section mixed methods survey. Reflexive thematic analysis was conducted on the open-ended questions. A common thread throughout participants responses is that there is a question of trust towards evolutionary algorithms within industry. Perhaps surprising is that the key to gaining this trust is not producing good results, but creating algorithms which explain the process they take in reaching a result. Based on this, recommendations have been made to increase their use in industry.
- 1 January 2021
- Published by Taylor & Francis in Cogent Engineering
- Vol. 8 (1)
Open AccessA user-centered approach to evolutionary algorithms and their use in industry
The key contribution of this article to the domain of engineering optimisation is establishing best practices with respect to the development of evolutionary algorithms in the context of design engineering. Despite their various uses, the uptake of evolutionary algorithms in industry remains limited. In order to understand why uptake is low a survey of engineers was undertaken, the results of which are presented here. A total of 23 participants (N = 23) took part in the 3-section mixed methods survey. Reflexive thematic analysis was conducted on the open-ended questions. A common thread throughout participants responses is that there is a question of trust towards evolutionary algorithms within industry. Perhaps surprising is that the key to gaining this trust is not producing good results, but creating algorithms which explain the process they take in reaching a result. Based on this, recommendations have been made to increase their use in industry.