Ke Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ke Chen has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Hongmei Zheng
School of Mechanical Engineering, Hefei University of Technology, Hefei 230009, China
10 shared publications - Rui Wu
School of Mechanical Engineering, Hefei University of Technology, Hefei, Anhui 230009, China
5 shared publications Xiaopeng Yu
School of Mechanical Engineering, Hefei University of Technology, 193 Tunxi Road, Hefei, Anhui 230009, China
4 shared publications- Yuanyuan Wang
Hefei University of Technology
4 shared publications Guojun Zhang
School of Mechanical Engineering, Hefei University of Technology, Hefei, Anhui 230009, China
3 shared publicationsHaishuo Wang
School of Mechanical Engineering, Hefei University of Technology, Hefei, Anhui 230009, China
3 shared publications
Latest Publications
- 5 September 2026
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 363 (16)
UK-theory-based cooperative game approach for adaptive robust control of space transportation manipulators with prescribed performance
- 5 September 2026
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 363 (16)
UK-theory-based cooperative game approach for adaptive robust control of space transportation manipulators with prescribed performance
- 17 August 2026
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 78 (10) , 1810-1819
Mechanisms of wind-induced fretting wear in cylindrical connecting clamps: a combined numerical and experimental study
Purpose: Fretting wear at the contact interface of cylindrical connecting clamps in 10 kV distribution networks under wind-induced vibration is a persistent reliability issue that can accelerate contact degradation and even trigger clamp failure. This study aims to clarify the dominant fretting wear mechanisms and their evolution under wind excitation by combining numerical simulation with laboratory experiments. Design/methodology/approach: A computational fluid dynamics (CFD) model was established in ANSYS FLUENT to simulate the flow field around the conductor–clamp assembly and to characterise vortex shedding (Karman vortex street) and the associated aerodynamic excitation. The resulting vibration-induced stress fluctuations of key clamp components were further evaluated using finite element analysis (FEA) in ANSYS. Fretting wear tests were then conducted on clamp material/contact pairs under controlled sinusoidal excitation at multiple amplitudes (and selected normal loads), with systematic measurement of surface damage, wear morphology and contact performance indicators. Findings: The simulations show that wind-induced vibration significantly increases stress fluctuations in the clamp, with the most pronounced response concentrated at the primary contact regions. Experimental results confirm that increasing vibration amplitude aggravates surface damage and wear debris accumulation at the contact interface. With amplitude growth, the prevailing wear mechanism gradually shifts from adhesive-dominated wear to a mixed regime characterised by oxidative wear and fatigue-driven damage, leading to faster deterioration of the contact condition. Originality/value: This work provides an integrated CFD–FEA–experiment framework that links vortex-shedding-induced aerodynamic excitation with clamp stress response and fretting-wear evolution. Unlike CFD-only studies that focus on flow-field characteristics, FEA-only studies that analyse contact stress without aerodynamic excitation or purely experimental studies that report wear regimes without a traceable excitation–stress pathway, the proposed framework establishes an explicit and end-to-end linkage from wind-induced flow excitation to structural response and finally to contact-interface damage evolution.
- 17 August 2026
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 78 (10) , 1810-1819
Mechanisms of wind-induced fretting wear in cylindrical connecting clamps: a combined numerical and experimental study
Purpose: Fretting wear at the contact interface of cylindrical connecting clamps in 10 kV distribution networks under wind-induced vibration is a persistent reliability issue that can accelerate contact degradation and even trigger clamp failure. This study aims to clarify the dominant fretting wear mechanisms and their evolution under wind excitation by combining numerical simulation with laboratory experiments. Design/methodology/approach: A computational fluid dynamics (CFD) model was established in ANSYS FLUENT to simulate the flow field around the conductor–clamp assembly and to characterise vortex shedding (Karman vortex street) and the associated aerodynamic excitation. The resulting vibration-induced stress fluctuations of key clamp components were further evaluated using finite element analysis (FEA) in ANSYS. Fretting wear tests were then conducted on clamp material/contact pairs under controlled sinusoidal excitation at multiple amplitudes (and selected normal loads), with systematic measurement of surface damage, wear morphology and contact performance indicators. Findings: The simulations show that wind-induced vibration significantly increases stress fluctuations in the clamp, with the most pronounced response concentrated at the primary contact regions. Experimental results confirm that increasing vibration amplitude aggravates surface damage and wear debris accumulation at the contact interface. With amplitude growth, the prevailing wear mechanism gradually shifts from adhesive-dominated wear to a mixed regime characterised by oxidative wear and fatigue-driven damage, leading to faster deterioration of the contact condition. Originality/value: This work provides an integrated CFD–FEA–experiment framework that links vortex-shedding-induced aerodynamic excitation with clamp stress response and fretting-wear evolution. Unlike CFD-only studies that focus on flow-field characteristics, FEA-only studies that analyse contact stress without aerodynamic excitation or purely experimental studies that report wear regimes without a traceable excitation–stress pathway, the proposed framework establishes an explicit and end-to-end linkage from wind-induced flow excitation to structural response and finally to contact-interface damage evolution.
- Open Access
Research on the Influence of Polygonal Scanner Reflection Point Drift on Measurement Accuracy in a Laser Scanning System
The polygonal scanner is a key component of a laser scanning system. The reflection point drift of a polygonal scanner is one of the primary sources of error that limits improvements in system measurement accuracy, significantly affecting the application of laser scanning systems in high-precision scenarios. Based on a geometric optics model, this article quantitatively analyzes the magnitude of the reflection point drift and the direction of the reflected ray caused by the rotation of the polygonal scanner, as well as the impact of this drift on measurement accuracy. The research shows that, compared to the ideal state, the reflection point drift causes the system’s absolute distortion to increase by nearly 20 times and relative distortion by nearly 5 times, indicating a great effect on measurement accuracy. Future research can directly incorporate this quantitative analysis model into the design of the relevant f-theta lens, effectively and conveniently improving lens design accuracy and thereby enhancing the overall measurement accuracy of the system. This study holds significant theoretical importance and engineering value in advancing the application of laser scanning technology in high-precision scenarios.
Open AccessResearch on the Influence of Polygonal Scanner Reflection Point Drift on Measurement Accuracy in a Laser Scanning System
The polygonal scanner is a key component of a laser scanning system. The reflection point drift of a polygonal scanner is one of the primary sources of error that limits improvements in system measurement accuracy, significantly affecting the application of laser scanning systems in high-precision scenarios. Based on a geometric optics model, this article quantitatively analyzes the magnitude of the reflection point drift and the direction of the reflected ray caused by the rotation of the polygonal scanner, as well as the impact of this drift on measurement accuracy. The research shows that, compared to the ideal state, the reflection point drift causes the system’s absolute distortion to increase by nearly 20 times and relative distortion by nearly 5 times, indicating a great effect on measurement accuracy. Future research can directly incorporate this quantitative analysis model into the design of the relevant f-theta lens, effectively and conveniently improving lens design accuracy and thereby enhancing the overall measurement accuracy of the system. This study holds significant theoretical importance and engineering value in advancing the application of laser scanning technology in high-precision scenarios.
- Open Access
Numerical Iterative Design and Analysis of Double Freeform Surface Telecentric F-Theta Lens
As one of the most important optical components of a laser scanning system, the f-theta lens group largely determines the working range and scanning accuracy of this system. In this paper, a numerical iterative design method of a double freeform surface telecentric f-theta lens is proposed. Then the scanning linearity and optical transmittance of the designed f-theta lens are simulated and analyzed. The results show that the f-theta lens designed by this method has a compact structure, large scanning area, extremely high optical transmittance over the entire field of view, and stable, controllable error of scanning linearity. Different from the optimization design method of the traditional f-theta lens group, the two freeform surfaces of this f-theta lens can be obtained directly and simultaneously by using this numerical iterative method, which consumes less computational resources and significantly reduces the design complexity.
Open AccessNumerical Iterative Design and Analysis of Double Freeform Surface Telecentric F-Theta Lens
As one of the most important optical components of a laser scanning system, the f-theta lens group largely determines the working range and scanning accuracy of this system. In this paper, a numerical iterative design method of a double freeform surface telecentric f-theta lens is proposed. Then the scanning linearity and optical transmittance of the designed f-theta lens are simulated and analyzed. The results show that the f-theta lens designed by this method has a compact structure, large scanning area, extremely high optical transmittance over the entire field of view, and stable, controllable error of scanning linearity. Different from the optimization design method of the traditional f-theta lens group, the two freeform surfaces of this f-theta lens can be obtained directly and simultaneously by using this numerical iterative method, which consumes less computational resources and significantly reduces the design complexity.
- 1 January 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (1)
Novel robust control with disturbance rejection for permanent magnet synchronous motors and experimental validation
A novel robust control strategy is proposed in this work to address the dynamic control problem of permanent magnet synchronous motors (PMSM) position tracking and lessen the effect of system parameter and load fluctuations on the dynamic performance of PMSM. The tracking performance is improved by a robust control element built with the Lyapunov method to reduce the impact of uncertain factors such as parameter uncertainty, nonlinear friction, and external interference; the nominal control element is stabilized by the dynamics model. The uniformly bounded and uniformly final bounded systems are proven, and the associated conclusions are provided using the Lyapunov minimax approach. In this work, modeling and experimental investigation are conducted using the cSPACE fast controller, based on the permanent magnet synchronous motor test platform. The results of the testing and simulation show that the developed controller can effectively regulate the permanent magnet synchronous motor and achieve more accurate position tracking even in the face of ambiguity.
- 1 January 2025
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 96 (1)
Novel robust control with disturbance rejection for permanent magnet synchronous motors and experimental validation
A novel robust control strategy is proposed in this work to address the dynamic control problem of permanent magnet synchronous motors (PMSM) position tracking and lessen the effect of system parameter and load fluctuations on the dynamic performance of PMSM. The tracking performance is improved by a robust control element built with the Lyapunov method to reduce the impact of uncertain factors such as parameter uncertainty, nonlinear friction, and external interference; the nominal control element is stabilized by the dynamics model. The uniformly bounded and uniformly final bounded systems are proven, and the associated conclusions are provided using the Lyapunov minimax approach. In this work, modeling and experimental investigation are conducted using the cSPACE fast controller, based on the permanent magnet synchronous motor test platform. The results of the testing and simulation show that the developed controller can effectively regulate the permanent magnet synchronous motor and achieve more accurate position tracking even in the face of ambiguity.
- 1 June 2024
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 361 (11)
Predefined performance control for fuzzy robotic systems with measurement noise: Adaptation, robustness, and fuzzy optimization
- 1 June 2024
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 361 (11)
Predefined performance control for fuzzy robotic systems with measurement noise: Adaptation, robustness, and fuzzy optimization
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Temperature Optimization for Efficient Power-to-Hydrogen Water Electrolysis
This paper proposes an optimization model for temperature of water electrolyzers in pursuit of maximum power-to-hydrogen efficiency. Unlike the traditional operating strategy which controls constant temperature, the model aims at obtaining optimal temperature according to the variation of supplied current. In order to realize the maximum efficiency, the temperature-dependent electrochemical model of the electrolyzer, as well as the thermal model of the heater, is established. The optimal temperature occurs where the electrochemical loss and the thermal loss meet the balance. From the simulation results, the proposed model can acquire optimal temperature based on the supplied current, which can be applied to the scene of fluctuating power supply, e.g. wind and solar power. The test results show that up to 15% efficiency improvement can be achieved with the proposed temperature control method, compared with the traditional constant temperature control.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Temperature Optimization for Efficient Power-to-Hydrogen Water Electrolysis
This paper proposes an optimization model for temperature of water electrolyzers in pursuit of maximum power-to-hydrogen efficiency. Unlike the traditional operating strategy which controls constant temperature, the model aims at obtaining optimal temperature according to the variation of supplied current. In order to realize the maximum efficiency, the temperature-dependent electrochemical model of the electrolyzer, as well as the thermal model of the heater, is established. The optimal temperature occurs where the electrochemical loss and the thermal loss meet the balance. From the simulation results, the proposed model can acquire optimal temperature based on the supplied current, which can be applied to the scene of fluctuating power supply, e.g. wind and solar power. The test results show that up to 15% efficiency improvement can be achieved with the proposed temperature control method, compared with the traditional constant temperature control.
- Open Access
- 15 October 2023
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 30 (5) , 1419-1434
Determining Singularity-Free Inner Workspace through Offline Conversion of Assembly Modes for a 3-RRR PPM
The existing singularity avoidance methods have deficiencies, such as the conditionality of the online conversion of the assembly modes (AMs) and the kinematically redundant manipulator with the predicament of the prototype design and added complexit...
- 15 October 2023
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 30 (5) , 1419-1434
Open AccessDetermining Singularity-Free Inner Workspace through Offline Conversion of Assembly Modes for a 3-RRR PPM
The existing singularity avoidance methods have deficiencies, such as the conditionality of the online conversion of the assembly modes (AMs) and the kinematically redundant manipulator with the predicament of the prototype design and added complexit...
- Top Cited Papers
- 9 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Fuzzy Systems
- Vol. 32 (3) , 1318-1330
Prescribed Performance Adaptive Robust Control for Robotic Manipulators With Fuzzy Uncertainty
This paper studies a prescribed performance adaptive robust control (PPARC) scheme for uncertain robotic manipulators. First, a state transformation is introduced to embed the predefined output constraints into the trajectory tracking servo constraints. Second, a PPARC is designed to fulfill the reference trajectory tracking and ensure the tracking errors within the predefined output constraints regardless of uncertainty and initial condition deviations. Then, Lyapunov stability analysis is conducted to prove the uniform boundedness (UB) and uniform ultimate boundedness (UUB) of the tracking error. Moreover, the optimization of the control parameter is translated into an optimal design problem, and a fuzzy-based cost function is proposed for the optimal design problem. The existence and uniqueness of the solution to the optimal design problem are theoretically proved. Finally, the effectiveness and superiority of the proposed control scheme are demonstrated based on simulation studies.
- 9 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Fuzzy Systems
- Vol. 32 (3) , 1318-1330
Top Cited PapersPrescribed Performance Adaptive Robust Control for Robotic Manipulators With Fuzzy Uncertainty
This paper studies a prescribed performance adaptive robust control (PPARC) scheme for uncertain robotic manipulators. First, a state transformation is introduced to embed the predefined output constraints into the trajectory tracking servo constraints. Second, a PPARC is designed to fulfill the reference trajectory tracking and ensure the tracking errors within the predefined output constraints regardless of uncertainty and initial condition deviations. Then, Lyapunov stability analysis is conducted to prove the uniform boundedness (UB) and uniform ultimate boundedness (UUB) of the tracking error. Moreover, the optimization of the control parameter is translated into an optimal design problem, and a fuzzy-based cost function is proposed for the optimal design problem. The existence and uniqueness of the solution to the optimal design problem are theoretically proved. Finally, the effectiveness and superiority of the proposed control scheme are demonstrated based on simulation studies.