Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shanaka Kristombu Baduge has a total of 67 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Molecular Scale Modelling and Chemical and Mechanical Characterization of Graphene-Oxide-Reinforced Calcium Silicate Hydrate (C-S-H) Using Reactive Force Field (ReaxFF)

    by Egodawaththa Ralalage Kanishka Chandrathilaka, Shanaka Kristombu Baduge, Petikirige Sadeep Madhushan Thilakarathna, Priyan Mendis

    Graphene and graphene oxide (GO) exhibit exceptional tensile strength and elastic modulus, and the functional groups on GO promote dispersion and accelerate hydration in cementitious matrices. This study uses molecular dynamics (MD) simulations to investigate the mechanical behaviour of graphene/GO-reinforced calcium silicate hydrate (C-S-H) at the nanoscale. A reactive force field (ReaxFF) with modified C/O parameters was developed to describe atomic interactions between C-S-H and graphene/GO. A more realistic C-S-H structure with varying calcium-to-silicon (Ca:Si) ratios was produced by removing silicate chain segments from tobermorite, followed by grand canonical Monte Carlo (GCMC) simulation to introduce water molecules and hydroxyl groups. Functional groups in GO formed extensive hydrogen bonds with neighbouring water and hydroxyl groups in the C-S-H matrix. At a Ca:Si ratio of 1.7, carboxyl-functionalized GO formed the most hydrogen bonds and achieved 26% higher pull-out strength than hydroxyl- and epoxy-functionalized GO. Graphene/GO improved x- and y-direction tensile performance relative to plain C-S-H, whereas the z-direction (out-of-plane) tensile properties were lower than those of plain C-S-H. Nevertheless, GO sheets bridged disconnected C-S-H globules, giving a z-direction tensile strength of 0.15–0.59 GPa, whereas pristine and defective graphene contributed negligibly (0.003–0.03 GPa). Tailoring GO functionalization and providing adequate anchorage length are therefore key to optimizing GO-reinforced C-S-H.

  • Identifying Three-Band Hyperspectral Composites that Outperform RGB for Floating Plastic Detection

    by Savindu Harith, Chathura Rajapakse, Thilini Mahanama, Dinesh Asanka, Shanaka Baduge, Gihan Ruwanpathirana, Sadeep Thilakarathna

  • Open Access

    Sustainable Bio-Epoxy Fabric-Reinforced Composites for Structural Insulated Panels

    by Petikirige Sadeep Madhushan Thilakarathna, Kasun Shanaka Kristombu Baduge, Upeka Gunarathne, James Cardamone, Luke Nicholls, Priyan Mendis

    The adoption of sustainable construction materials in the building sector is increasing, driven by global net-zero targets, regulatory pressures, and growing demand for low-carbon and resource-efficient construction. In this context, this research investigates the feasibility of using bio-based fibre-reinforced epoxy resin composite laminates with recycled polyethylene terephthalate cores in structural insulated panels (SIPs) as an alternative to conventional SIP systems. Laminates were fabricated via a wet layup method using two epoxy resins and five fabric types, including flax, hemp, and recycled PET fabrics. Tensile and flexural testing revealed that hemp fabric paired with a fully bio-based epoxy provided the optimum combination of strength and elastic modulus. Small-scale SIP prototypes utilizing optimum laminate and rPET cores were tested for edgewise compression and flexure against expanded polystyrene (EPS) equivalents. The rPET SIPs demonstrated compressive and flexural capacities two to three times greater than the EPS panels. These findings demonstrate the potential of sustainable fabric-reinforced epoxy resin composite SIPs for specialized high-performance construction applications where enhanced structural capacity and sustainability are required. Although further work is needed to address cost, fire performance, and scalable manufacturing, the proposed system presents a promising alternative for next-generation sustainable building systems.

  • Top Cited Papers
    Open Access

    A Global Perspective on Decarbonising Economies Through Clean Hydrogen: Adaptation, Supply Chain, Utilisation, National Hydrogen Initiatives, and Challenges

    by Amila Premakumara, Shanaka Kristombu Baduge, Upeka Gunarathne, Susiri Costa, Sadeep Thilakarathna, Priyan Mendis, Adam Swanger, Saif Al Ghafri, William Notardonato, Gang Li

    Hydrogen has emerged as a cornerstone of global decarbonisation strategies, offering a flexible pathway to reduce dependence on fossil fuels and accelerate progress towards net-zero targets. However, the development of a globally integrated hydrogen economy remains uneven, reflecting disparities in renewable energy potential, infrastructure readiness, investment capacity, and policy commitment. To better understand these differences and the barriers they create, this study undertakes a comprehensive comparative assessment of the global hydrogen supply chain encompassing resources, production, storage, transport, and end-use applications. Further, a structured analytical framework comprising ten principles and twenty-nine sub-factors was developed to evaluate national hydrogen policies, technological readiness, and enabling conditions across twenty-six countries. The results show that the United States, China, Japan, South Korea, and Germany lead global progress, while many countries remain at an early stage of engagement. These findings further inform persistent regional asymmetries and emphasise the need for stronger international coordination. Drawing on these findings, the paper advances targeted policy and research recommendations to lower production costs, expand storage and transport capacity, and harmonise regulatory frameworks, thereby defining a coherent pathway towards a secure, cost-competitive, and equitable global hydrogen economy by 2050.


  • Open Access

    A two-scale constitutive model for steel-confined ultra-high-performance concrete (UHPC) considering fibre–confinement interactions

    by Shack Yee Hiew, Keat Bin Teoh, Chung-Chan Hung, Doo-Yeol Yoo, Shanaka Kristombu Baduge, Daniel Kong, Sudharshan N. Raman


  • Open Access

    Integrated Development of Mechanical Strength and Thermoelectric Properties in Cement Composites Incorporating Graphene Oxide and Manganese Dioxide

    by Jude Shalitha Perera, Anuradha Silva, Priyan Mendis, Shanaka Kristombu Baduge, Aathavan Kuhanandha, Lochlan Hau, Philip Trinh

    Cement-based thermoelectric materials are gaining popularity among materials scientists due to their robust mechanical characteristics and suitability for thermal energy harvesting in building applications. However, despite advancements in the development of these materials, a significant knowledge gap persists regarding their mechanical characterisation. This research aimed to enhance the thermoelectric performance of cement composites through the incorporation of graphene oxide (GO) and manganese dioxide (MnO2), while ensuring adequate compressive strength was maintained. An experimental investigation was conducted to simultaneously assess both properties of cement composites using identical specimens. Additionally, microstructural analysis of the samples was performed to further understand the integrated development of these two properties. To evaluate the integrative properties, a Pareto analysis was performed to identify the Pareto-optimal solutions for specific applications. Additionally, a new index, termed the Thermoelectric Strength Index (TSI), was developed to compare materials in applications where both thermoelectric efficiency and mechanical robustness are important. The findings indicated that while both GO and MnO2 enhanced the thermoelectric properties of cement, their reactions with the cement phases produced distinct relationships with compressive strength, especially when GO and MnO2 were added together. The TSI demonstrated that MnO2 was superior for simultaneously enhancing mechanical strength and thermoelectric performance, with the 7.5 wt.% formulation yielding the best results. This study demonstrates the complex interrelationship between the mechanical strength and thermoelectric properties of the investigated fillers, underscoring the necessity for a holistic approach in the development of thermoelectric cement composites.


  • Open Access

    Integrative Development of Mechanical Strength and Thermoelectric Properties in Cement Composites Incorporating Graphene Oxide and Manganese Dioxide

    by Jude Shalitha Perera, Anuradha Silva, Priyan Mendis, Shanaka Kristombu Baduge, Aathavan Kuhanandha, Lochlan Hau, Philip Trinh

    Buildings constantly consume energy to maintain internal temperature, and the thermal difference between the interior and exterior of a wall panel provides an opportunity for energy generation through the Seebeck effect. Due to their strength and durability, cement-based thermoelectric materials are gaining interest among materials scientists for their potential applications in thermal energy harvesting in buildings. Though thermoelectric cementitious materials have been developed, there has been little research into the mechanical properties of these materials with the addition of conductive fillers. This study investigates the incorporation of the carbon-based additive, reduced graphene oxide (rGO) and the transition metal oxide, manganese dioxide (MnO2) to improve the thermoelectric properties of cement composites while maintaining adequate compressive strength. In order to test both thermoelectric and mechanical properties with the same sample, cube samples measuring 50x50x50 mm were prepared instead of the typical cuboid shape samples. The Seebeck effect was assessed by heating one side of each sample to 65°C using a hotplate and recording the temperature and generated voltage. The same samples were then used for compressive strength testing, and the samples with the best properties were then subjected to microstructural analysis. The findings indicate that while both rGO and MnO2 enhance the thermoelectric properties of cement, their reactions with the cement phases produce distinct relationships with compressive strength specially when rGO and MnO2 added together. It was found that increasing rGO from 0.025 to 0.075 wt.% decreased compressive strength as workability was reduced, whereas increasing MnO2 from 2.5% to 7.5% wt.% increased compressive strength by more than 60% as workability improved. Thermoelectric properties were best in the composite sample with 0.075 wt.% rGO + 7.5% wt.% MnO2. To evaluate the integrative properties a new index called “Thermoelectric Strength Index (TSI)” is developed, which showed MnO2 is better in the integrative development of mechanical strength and thermoelectric properties in cement composites with 7.5 wt.% giving the best results.

  • Open Access

    Enhancing the Efficiency of Plastic Recovery Facilities: Systematically Integrating Seasonal and Regional Variations of Municipal Solid Recyclable Waste Through Infeed Management

    by Jude Shalitha Perera, Shanaka Kristombu Baduge, Egodawaththa Ralalage Kanishka Chandrathilaka, Sadeep Thilakarathna, Thilini S. Palle, A.M. Amado, Priyan Mendis


  • Open Access

    Effect of Graphene Oxide Nanomaterials on the Durability of Concrete: A Review on Mechanisms, Provisions, Challenges, and Future Prospects

    by Danula Udumulla, Thusitha Ginigaddara, Thushara Jayasinghe, Priyan Mendis, Shanaka Baduge

    This review focuses on recent advances in concrete durability using graphene oxide (GO) as a nanomaterial additive, with a goal to fill the gap between concrete technology, chemical interactions, and concrete durability, whilst providing insights for the adaptation of GO as an additive in concrete construction. An overview of concrete durability applications, key durability failure mechanisms of concrete, transportation mechanisms, chemical reactions involved in compromising durability, and the chemical alterations within a concrete system are discussed to understand how they impact the overall durability of concrete. The existing literature on the durability and chemical resistance of GO-reinforced concrete and mortar was reviewed and summarized. The impacts of nano-additives on the durability of concrete and its mechanisms are thoroughly discussed, particularly focusing on GO as the primary nanomaterial and its impact on durability. Finally, research gaps, future recommendations, and challenges related to the durability of mass-scale GO applications are presented.


  • Open Access

    Design of prefabricated footing connection using a coupled hydro‐mechanical finite element model

    by Bertrand Teodosio, Kasun Shanaka Kristombu Baduge, Priyan Mendis

    The use of prefabricated systems can alleviate the inadequate housing and skilled workers in most developed countries by expediting required construction time, reducing material wastage, decreasing the effect of weather impacts, minimizing unexpected costs, skilled labor dependence, and construction hazards. The full potential of prefabricated construction is yet to be realized in part due to most advancements being focused on its superstructure. The development of prefabricated substructures for lightweight buildings needs to consider the susceptibility to damage induced by the shrink‐swell movement of expansive soils causing significant global financial losses. Prefabricated substructures should have robust connections in discontinued regions to transfer forces and moments. Due to these issues, the aim of this study is to develop a connection for prefabricated raft substructures of single‐detached dwellings on expansive soils using a combined soil‐structure contact analysis and strut‐and‐tie model approach. The developed substructure system was validated using experiments and further investigated through numerical simulations. The developed prefabricated connection was observed to have satisfactory performance, potentially overcoming most construction limitations of conventional monolithic cast‐in‐place raft substructures, such as faster, safer, and more sustainable construction, while providing comparable strength and serviceability.