Haichang Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Haichang Yang has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Binglin Zeng
Department of Chemistry The University of Hong Kong Hong Kong 999077 China
8 shared publications Xiahui Gui
Organization=State Key Laboratory of Coking Coal Resources Green Exploitation, addressline=China University of Mining and Technology, city=Xuzhou 221116, country=China; organization=Chinese National Engineering Research Center of Coal Preparation and Purification, addressline=China University of Mining and Technology, city=Xuzhou 221116, country=China
8 shared publications- Xuehua Zhang
Department of Chemical and Materials Engineering University of Alberta Edmonton Alberta Canada
8 shared publications Yijun Cao
Organization=Chinese National Engineering Research Center of Coal Preparation and Purification, addressline=China University of Mining and Technology, city=Xuzhou 221116, country=China
5 shared publications- Yaowen Xing
China University of Mining and Technology
3 shared publications - Detlef Lohse
University of Twente
2 shared publications
Latest Publications
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Metal cation-enhanced low-rank coal flotation using water-in-oil high internal phase emulsion (HIPE) collectors
To address the low attachment efficiency and high consumption of traditional nonpolar hydrocarbon oil collectors in low-rank coal (LRC) flotation, this study developed metal cation-reinforced water-in-oil (W/O) high internal phase emulsion (HIPE) collectors. The effects of multivalent metal cations (Na+, Ca2+, and Al3+) in the dispersed phase on the droplet size, Zeta potential, rheology, and dynamic stability of HIPEs were systematically investigated. Interfacial micro-interaction forces were quantified via an in situ microbalance system, and flotation parameters were optimized using a Box–Behnken design (BBD). Results showed that higher cation valences significantly reduced the median droplet diameter (reaching 3.673 μm for Al3+) and the absolute Zeta potential, while enhancing apparent viscosity and structural strength. Micromechanical tests confirmed that multivalent cations substantially increased the maximum adhesion force, peaking at 2734.38 μN for the Al3+ system. The 0.1 mol/l AlCl3 system achieved an optimal flotation combustible recovery of 94.81% at a collector dosage of 560 g/t. BBD optimization identified optimal conditions [0.15 m3/(m2 min) aeration rate, 560 g/t collector, and 1000 g/t frother], revealing a highly significant collector–frother interaction. Mechanistically, multivalent cations compress the electrical double layer, reduce interfacial potential, and promote specific adsorption and ion bridging. This macroscopically enhances emulsion stability and microscopically reinforces three-phase contact line anchoring, thereby significantly improving the LRC flotation efficiency. This study provides a profound mechanical insight into the interfacial optimization of coal flotation, establishing a theoretical foundation for the precise design of high-performance emulsion collectors.
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Metal cation-enhanced low-rank coal flotation using water-in-oil high internal phase emulsion (HIPE) collectors
To address the low attachment efficiency and high consumption of traditional nonpolar hydrocarbon oil collectors in low-rank coal (LRC) flotation, this study developed metal cation-reinforced water-in-oil (W/O) high internal phase emulsion (HIPE) collectors. The effects of multivalent metal cations (Na+, Ca2+, and Al3+) in the dispersed phase on the droplet size, Zeta potential, rheology, and dynamic stability of HIPEs were systematically investigated. Interfacial micro-interaction forces were quantified via an in situ microbalance system, and flotation parameters were optimized using a Box–Behnken design (BBD). Results showed that higher cation valences significantly reduced the median droplet diameter (reaching 3.673 μm for Al3+) and the absolute Zeta potential, while enhancing apparent viscosity and structural strength. Micromechanical tests confirmed that multivalent cations substantially increased the maximum adhesion force, peaking at 2734.38 μN for the Al3+ system. The 0.1 mol/l AlCl3 system achieved an optimal flotation combustible recovery of 94.81% at a collector dosage of 560 g/t. BBD optimization identified optimal conditions [0.15 m3/(m2 min) aeration rate, 560 g/t collector, and 1000 g/t frother], revealing a highly significant collector–frother interaction. Mechanistically, multivalent cations compress the electrical double layer, reduce interfacial potential, and promote specific adsorption and ion bridging. This macroscopically enhances emulsion stability and microscopically reinforces three-phase contact line anchoring, thereby significantly improving the LRC flotation efficiency. This study provides a profound mechanical insight into the interfacial optimization of coal flotation, establishing a theoretical foundation for the precise design of high-performance emulsion collectors.
- Open Access
- 29 November 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 706, 139562
Nanobubble nucleation dynamics in reacting microdroplets: Insights from confocal laser scanning microscopy and molecular dynamics simulations
- 29 November 2025
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 706, 139562
Open AccessNanobubble nucleation dynamics in reacting microdroplets: Insights from confocal laser scanning microscopy and molecular dynamics simulations
- Open Access
- 22 April 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (17) , 17143-17151
Study on Particle–Bubble Interaction and Separation in Fluidized-Bed Flotation
Fluidized-bed flotation can realize effective recovery of coarse minerals. In this study, 1-2 mm lignite was used as the experimental material. First, the interaction between the particle and bubble was investigated to reveal the mechanism of fluidized-bed flotation. The rising water flow makes the particle settling velocity decrease, leading to an increase in the particle-bubble contact time. The application of methyl oleate as a collector for coal leads to a significant reduction in the induction time and an increase in the critical detachment force. Both these conditions contribute to the formation of particle-bubble aggregation, indicating that the decrease in settling velocity and the enhancement of hydrophobicity are significant for the recovery of coarse coal. Subsequently, a comparative analysis of separation efficiency between column flotation and fluidized-bed flotation was performed alongside an investigation into the optimal parameters of fluidized-bed flotation. The clean coal yield of fluidized-bed flotation is more than 30%, while that of column flotation is less than 10%. The combination of fluidized-bed flotation and a methyl oleate collector demonstrates a capacity for efficient recovery of coarse coal particles. When the methyl oleate dosage is 2000 g/t and the superficial water velocity is 87 mm/s, the fluidized-bed flotation achieves the optimum separation effect, with a clean coal yield of 32.71% and an ash content of 9.89%.
- 22 April 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (17) , 17143-17151
Open AccessStudy on Particle–Bubble Interaction and Separation in Fluidized-Bed Flotation
Fluidized-bed flotation can realize effective recovery of coarse minerals. In this study, 1-2 mm lignite was used as the experimental material. First, the interaction between the particle and bubble was investigated to reveal the mechanism of fluidized-bed flotation. The rising water flow makes the particle settling velocity decrease, leading to an increase in the particle-bubble contact time. The application of methyl oleate as a collector for coal leads to a significant reduction in the induction time and an increase in the critical detachment force. Both these conditions contribute to the formation of particle-bubble aggregation, indicating that the decrease in settling velocity and the enhancement of hydrophobicity are significant for the recovery of coarse coal. Subsequently, a comparative analysis of separation efficiency between column flotation and fluidized-bed flotation was performed alongside an investigation into the optimal parameters of fluidized-bed flotation. The clean coal yield of fluidized-bed flotation is more than 30%, while that of column flotation is less than 10%. The combination of fluidized-bed flotation and a methyl oleate collector demonstrates a capacity for efficient recovery of coarse coal particles. When the methyl oleate dosage is 2000 g/t and the superficial water velocity is 87 mm/s, the fluidized-bed flotation achieves the optimum separation effect, with a clean coal yield of 32.71% and an ash content of 9.89%.
- 13 August 2024
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 411
Solid-liquid interfacial nanobubble nucleation dynamics influenced by surface hydrophobicity and gas oversaturation
- 13 August 2024
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 411
Solid-liquid interfacial nanobubble nucleation dynamics influenced by surface hydrophobicity and gas oversaturation
- 2 February 2024
- Published by Elsevier in Surfaces and Interfaces
- Vol. 46
The stability and geometrical characteristics of solid-liquid interfacial nanobubbles in complex aqueous solution environments
- 2 February 2024
- Published by Elsevier in Surfaces and Interfaces
- Vol. 46
The stability and geometrical characteristics of solid-liquid interfacial nanobubbles in complex aqueous solution environments
- Open Access
Launching a Drop via Interplay of Buoyancy and Stick‐Jump Dissolution
According to Archimedes' principle, a submerged object with a density lower than that of aqueous acid solution is more buoyant than a smaller one. In this work, a remarkable phenomenon is reported wherein a dissolving drop on a substrate rises in the water only after it has diminished to a much smaller size, though the buoyancy is smaller. The drop consisting of a polymer solution reacts with the acid in the surrounding, yielding a water‐soluble product. During drop dissolution, water‐rich microdroplets form within the drop, merging with the external aqueous phase along the drop‐substrate boundary. Two key elements determine the drop rise dynamics. The first is the stick‐jump behavior during drop dissolution. The second is that buoyancy exerts a strong enough force on the drop at an Archimedean number greater than 1, while the stick‐jump behavior is ongoing. The time of the drop rise is controlled by the initial size and the reaction rate of the drop. This novel mechanism for programmable drop rise may be beneficial for many future applications, such as microfluidics, microrobotics, and device engineering where the spontaneous drop detachment may be utilized to trigger a cascade of events in a dense medium.
Open AccessLaunching a Drop via Interplay of Buoyancy and Stick‐Jump Dissolution
According to Archimedes' principle, a submerged object with a density lower than that of aqueous acid solution is more buoyant than a smaller one. In this work, a remarkable phenomenon is reported wherein a dissolving drop on a substrate rises in the water only after it has diminished to a much smaller size, though the buoyancy is smaller. The drop consisting of a polymer solution reacts with the acid in the surrounding, yielding a water‐soluble product. During drop dissolution, water‐rich microdroplets form within the drop, merging with the external aqueous phase along the drop‐substrate boundary. Two key elements determine the drop rise dynamics. The first is the stick‐jump behavior during drop dissolution. The second is that buoyancy exerts a strong enough force on the drop at an Archimedean number greater than 1, while the stick‐jump behavior is ongoing. The time of the drop rise is controlled by the initial size and the reaction rate of the drop. This novel mechanism for programmable drop rise may be beneficial for many future applications, such as microfluidics, microrobotics, and device engineering where the spontaneous drop detachment may be utilized to trigger a cascade of events in a dense medium.
- 14 March 2023
- Published by AIP Publishing
- Vol. 35 (3) , 032108
10.1063/5.0141614.5
Enhancing boundary slip using interfacial nanobubbles (INBs) has gained significant interest in nanofluidic transport. In this study, we conducted a comprehensive investigation on the influence of INBs on boundary conditions for both smooth and rough substrates using molecular dynamics simulations. We analyzed the impact of INB protrusion angle, coverage percentage, quantity, and fluidity on the slip length. Our results showed that INBs always increase the slip length on a smooth substrate, with a linear increase in slip length observed with increasing surface coverage. On a rough substrate, we found that the protrusion angle, quantity, and fluidity of INBs play a crucial role in determining the slip length. Smaller protrusion angles and fewer quantities of INBs were found to be more favorable for enhancing the slip length when the INB coverage is fixed, while the correlation between boundary slip and INB quantity depended on the wetting state of the substrate when the size of the INBs was fixed with a low protrusion angle. Additionally, we revealed that the fluidity of gas molecules inside the INBs dominated the enhancement of slip length by INBs. Overall, our findings are expected to provide valuable insight into drag reduction based on INBs.
- 14 March 2023
- Published by AIP Publishing
- Vol. 35 (3) , 032108
10.1063/5.0141614.5
Enhancing boundary slip using interfacial nanobubbles (INBs) has gained significant interest in nanofluidic transport. In this study, we conducted a comprehensive investigation on the influence of INBs on boundary conditions for both smooth and rough substrates using molecular dynamics simulations. We analyzed the impact of INB protrusion angle, coverage percentage, quantity, and fluidity on the slip length. Our results showed that INBs always increase the slip length on a smooth substrate, with a linear increase in slip length observed with increasing surface coverage. On a rough substrate, we found that the protrusion angle, quantity, and fluidity of INBs play a crucial role in determining the slip length. Smaller protrusion angles and fewer quantities of INBs were found to be more favorable for enhancing the slip length when the INB coverage is fixed, while the correlation between boundary slip and INB quantity depended on the wetting state of the substrate when the size of the INBs was fixed with a low protrusion angle. Additionally, we revealed that the fluidity of gas molecules inside the INBs dominated the enhancement of slip length by INBs. Overall, our findings are expected to provide valuable insight into drag reduction based on INBs.
- 14 March 2023
- Published by AIP Publishing
- Vol. 35 (3) , 032108
10.1063/5.0141614.4
Enhancing boundary slip using interfacial nanobubbles (INBs) has gained significant interest in nanofluidic transport. In this study, we conducted a comprehensive investigation on the influence of INBs on boundary conditions for both smooth and rough substrates using molecular dynamics simulations. We analyzed the impact of INB protrusion angle, coverage percentage, quantity, and fluidity on the slip length. Our results showed that INBs always increase the slip length on a smooth substrate, with a linear increase in slip length observed with increasing surface coverage. On a rough substrate, we found that the protrusion angle, quantity, and fluidity of INBs play a crucial role in determining the slip length. Smaller protrusion angles and fewer quantities of INBs were found to be more favorable for enhancing the slip length when the INB coverage is fixed, while the correlation between boundary slip and INB quantity depended on the wetting state of the substrate when the size of the INBs was fixed with a low protrusion angle. Additionally, we revealed that the fluidity of gas molecules inside the INBs dominated the enhancement of slip length by INBs. Overall, our findings are expected to provide valuable insight into drag reduction based on INBs.
- 14 March 2023
- Published by AIP Publishing
- Vol. 35 (3) , 032108
10.1063/5.0141614.4
Enhancing boundary slip using interfacial nanobubbles (INBs) has gained significant interest in nanofluidic transport. In this study, we conducted a comprehensive investigation on the influence of INBs on boundary conditions for both smooth and rough substrates using molecular dynamics simulations. We analyzed the impact of INB protrusion angle, coverage percentage, quantity, and fluidity on the slip length. Our results showed that INBs always increase the slip length on a smooth substrate, with a linear increase in slip length observed with increasing surface coverage. On a rough substrate, we found that the protrusion angle, quantity, and fluidity of INBs play a crucial role in determining the slip length. Smaller protrusion angles and fewer quantities of INBs were found to be more favorable for enhancing the slip length when the INB coverage is fixed, while the correlation between boundary slip and INB quantity depended on the wetting state of the substrate when the size of the INBs was fixed with a low protrusion angle. Additionally, we revealed that the fluidity of gas molecules inside the INBs dominated the enhancement of slip length by INBs. Overall, our findings are expected to provide valuable insight into drag reduction based on INBs.
- 14 March 2023
- Published by AIP Publishing
- Vol. 35 (3) , 032108
10.1063/5.0141614.2
Enhancing boundary slip using interfacial nanobubbles (INBs) has gained significant interest in nanofluidic transport. In this study, we conducted a comprehensive investigation on the influence of INBs on boundary conditions for both smooth and rough substrates using molecular dynamics simulations. We analyzed the impact of INB protrusion angle, coverage percentage, quantity, and fluidity on the slip length. Our results showed that INBs always increase the slip length on a smooth substrate, with a linear increase in slip length observed with increasing surface coverage. On a rough substrate, we found that the protrusion angle, quantity, and fluidity of INBs play a crucial role in determining the slip length. Smaller protrusion angles and fewer quantities of INBs were found to be more favorable for enhancing the slip length when the INB coverage is fixed, while the correlation between boundary slip and INB quantity depended on the wetting state of the substrate when the size of the INBs was fixed with a low protrusion angle. Additionally, we revealed that the fluidity of gas molecules inside the INBs dominated the enhancement of slip length by INBs. Overall, our findings are expected to provide valuable insight into drag reduction based on INBs.
- 14 March 2023
- Published by AIP Publishing
- Vol. 35 (3) , 032108
10.1063/5.0141614.2
Enhancing boundary slip using interfacial nanobubbles (INBs) has gained significant interest in nanofluidic transport. In this study, we conducted a comprehensive investigation on the influence of INBs on boundary conditions for both smooth and rough substrates using molecular dynamics simulations. We analyzed the impact of INB protrusion angle, coverage percentage, quantity, and fluidity on the slip length. Our results showed that INBs always increase the slip length on a smooth substrate, with a linear increase in slip length observed with increasing surface coverage. On a rough substrate, we found that the protrusion angle, quantity, and fluidity of INBs play a crucial role in determining the slip length. Smaller protrusion angles and fewer quantities of INBs were found to be more favorable for enhancing the slip length when the INB coverage is fixed, while the correlation between boundary slip and INB quantity depended on the wetting state of the substrate when the size of the INBs was fixed with a low protrusion angle. Additionally, we revealed that the fluidity of gas molecules inside the INBs dominated the enhancement of slip length by INBs. Overall, our findings are expected to provide valuable insight into drag reduction based on INBs.
- 14 March 2023
- Published by AIP Publishing
- Vol. 35 (3) , 032108
10.1063/5.0141614.1
Enhancing boundary slip using interfacial nanobubbles (INBs) has gained significant interest in nanofluidic transport. In this study, we conducted a comprehensive investigation on the influence of INBs on boundary conditions for both smooth and rough substrates using molecular dynamics simulations. We analyzed the impact of INB protrusion angle, coverage percentage, quantity, and fluidity on the slip length. Our results showed that INBs always increase the slip length on a smooth substrate, with a linear increase in slip length observed with increasing surface coverage. On a rough substrate, we found that the protrusion angle, quantity, and fluidity of INBs play a crucial role in determining the slip length. Smaller protrusion angles and fewer quantities of INBs were found to be more favorable for enhancing the slip length when the INB coverage is fixed, while the correlation between boundary slip and INB quantity depended on the wetting state of the substrate when the size of the INBs was fixed with a low protrusion angle. Additionally, we revealed that the fluidity of gas molecules inside the INBs dominated the enhancement of slip length by INBs. Overall, our findings are expected to provide valuable insight into drag reduction based on INBs.
- 14 March 2023
- Published by AIP Publishing
- Vol. 35 (3) , 032108
10.1063/5.0141614.1
Enhancing boundary slip using interfacial nanobubbles (INBs) has gained significant interest in nanofluidic transport. In this study, we conducted a comprehensive investigation on the influence of INBs on boundary conditions for both smooth and rough substrates using molecular dynamics simulations. We analyzed the impact of INB protrusion angle, coverage percentage, quantity, and fluidity on the slip length. Our results showed that INBs always increase the slip length on a smooth substrate, with a linear increase in slip length observed with increasing surface coverage. On a rough substrate, we found that the protrusion angle, quantity, and fluidity of INBs play a crucial role in determining the slip length. Smaller protrusion angles and fewer quantities of INBs were found to be more favorable for enhancing the slip length when the INB coverage is fixed, while the correlation between boundary slip and INB quantity depended on the wetting state of the substrate when the size of the INBs was fixed with a low protrusion angle. Additionally, we revealed that the fluidity of gas molecules inside the INBs dominated the enhancement of slip length by INBs. Overall, our findings are expected to provide valuable insight into drag reduction based on INBs.