Inna Bilous
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Inna Bilous has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Valerii Deshko
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
18 shared publications - Nadia Buyak
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute", Ukraine
8 shared publications - Iryna Sukhodub
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
5 shared publications - Hanna Hetmanchuk
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського», пр-т Перемоги, 37, м. Київ, 03056, Україна
3 shared publications - Olena Naumchuk
Навчально-науковий інститут атомної та теплової енергетики, Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського», Інститут технічної теплофізики НАН України
3 shared publications M. Gureev
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, 37 Prosp. Peremohy av., Kyiv, 03056, Ukraine
2 shared publications
Latest Publications
- Open Access
- 12 October 2026
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3,p. 159-168
ANALYSIS OF THE IMPACT OF VENTILATION SYSTEM EFFICIENCY ON THE ENERGY CONSUMPTION OF BUILDINGS WITH DIFFERENT LEVELS OF THERMAL INSULATION IN THE CLIMATIC CONDITIONS OF UKRAINE
Objective The study aims to determine the impact of changing the thermal insulation characteristics of the building envelope and implementing a heat-recovery ventilation system on the building's energy consumption, taking into account energy efficiency requirements for different regions of Ukraine. Methods The research methodology is based on mathematical modelling of thermal processes within a building using building physics methods in accordance with current regulatory requirements. The analysis was performed for several scenarios of building insulation and the installation of a heat-recovery ventilation system, determining the building's energy demand across different climatic zones of Ukraine. Results The hourly variation in the energy load for heating and domestic hot water supply was obtained for a building in Kyiv over a calendar year. The impact of increasing the thermal resistance of the insulation on reducing winter heat losses, as well as its effect on increasing the cooling load during the summer season, was quantitatively assessed for various cities in Ukraine. The potential for reducing the building's energy demand through the integration of ventilation systems with different levels of exhaust air heat recovery efficiency was determined. Furthermore, the difference in seasonal energy loads between Kyiv and Odesa was established for a combined building retrofit scenario. Conclusions The research findings justify the need to implement energy-efficient solutions tailored to regional climatic characteristics: northern regions require measures to minimize heat losses and improve heating system efficiency, while southern regions must account for the risks of summer overheating and incorporate passive cooling strategies.
- 12 October 2026
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3,p. 159-168
Open AccessANALYSIS OF THE IMPACT OF VENTILATION SYSTEM EFFICIENCY ON THE ENERGY CONSUMPTION OF BUILDINGS WITH DIFFERENT LEVELS OF THERMAL INSULATION IN THE CLIMATIC CONDITIONS OF UKRAINE
Objective The study aims to determine the impact of changing the thermal insulation characteristics of the building envelope and implementing a heat-recovery ventilation system on the building's energy consumption, taking into account energy efficiency requirements for different regions of Ukraine. Methods The research methodology is based on mathematical modelling of thermal processes within a building using building physics methods in accordance with current regulatory requirements. The analysis was performed for several scenarios of building insulation and the installation of a heat-recovery ventilation system, determining the building's energy demand across different climatic zones of Ukraine. Results The hourly variation in the energy load for heating and domestic hot water supply was obtained for a building in Kyiv over a calendar year. The impact of increasing the thermal resistance of the insulation on reducing winter heat losses, as well as its effect on increasing the cooling load during the summer season, was quantitatively assessed for various cities in Ukraine. The potential for reducing the building's energy demand through the integration of ventilation systems with different levels of exhaust air heat recovery efficiency was determined. Furthermore, the difference in seasonal energy loads between Kyiv and Odesa was established for a combined building retrofit scenario. Conclusions The research findings justify the need to implement energy-efficient solutions tailored to regional climatic characteristics: northern regions require measures to minimize heat losses and improve heating system efficiency, while southern regions must account for the risks of summer overheating and incorporate passive cooling strategies.
- 9 April 2026
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 1,p. 55-70
RESEARCH ON THERMAL INSULATION ISSUES OF HISTORIC BUILDINGS
The relevance of this study is driven by increasing energy efficiency requirements for the existing building stock alongside the necessity to preserve historic and architectural heritage. Historic buildings are typically characterized by massive masonry envelopes with high thermal inertia and moisture buffering capacity, which limits the applicability of conventional insulation solutions developed for modern lightweight constructions. Consequently, internal wall insulation of historic buildings requires scientifically substantiated approaches based on comprehensive thermal and hygrothermal assessment of envelope performance and material compatibility.Objective. The objective of this study is to substantiate approaches to the selection and application of insulation materials for internal insulation of historic masonry walls based on a combined thermal and hygrothermal analysis, with particular emphasis on energy efficiency and long-term hygrothermal stability of the building envelope.Methods. The study is based on methods of building physics, normative thermal resistance calculation, and hygrothermal analysis of building envelopes in accordance with the current regulatory framework. Comparative thermal and moisture calculations were performed for internal insulation systems using mineral wool, hemp-based insulation, and cellular foam glass under identical climatic and operating conditions. Material properties were adopted in accordance with national standards, and specialized engineering software was used to ensure consistency and reproducibility of the calculation results.Results. The influence of internal insulation on the thermal and hygrothermal behavior of massive masonry walls typical of historic buildings was analyzed. The results show that insulation materials with comparable thermal resistance values may exhibit fundamentally different hygrothermal performance. Insulation systems with limited moisture-regulating capacity were found to be associated with seasonal moisture accumulation and the formation of an unbalanced annual moisture regime, whereas bio-based insulation materials demonstrated lower moisture accumulation and a more balanced hygrothermal behavior of the envelope. Furthermore, the application of cellular foam glass demonstrated a complete absence of interstitial condensation and zero seasonal moisture accumulation due to its closed-cell structure and high vapor diffusion resistance.Conclusions. The findings indicate that the effectiveness of internal insulation in historic buildings is determined not only by thermal resistance but primarily by the compatibility of insulation materials with the hygrothermal characteristics of traditional masonry. A comprehensive approach to internal thermal retrofitting is substantiated, combining energy efficiency requirements with hygrothermal reliability to ensure durability and long-term preservation of historic building structures.
- 9 April 2026
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 1,p. 55-70
RESEARCH ON THERMAL INSULATION ISSUES OF HISTORIC BUILDINGS
The relevance of this study is driven by increasing energy efficiency requirements for the existing building stock alongside the necessity to preserve historic and architectural heritage. Historic buildings are typically characterized by massive masonry envelopes with high thermal inertia and moisture buffering capacity, which limits the applicability of conventional insulation solutions developed for modern lightweight constructions. Consequently, internal wall insulation of historic buildings requires scientifically substantiated approaches based on comprehensive thermal and hygrothermal assessment of envelope performance and material compatibility.Objective. The objective of this study is to substantiate approaches to the selection and application of insulation materials for internal insulation of historic masonry walls based on a combined thermal and hygrothermal analysis, with particular emphasis on energy efficiency and long-term hygrothermal stability of the building envelope.Methods. The study is based on methods of building physics, normative thermal resistance calculation, and hygrothermal analysis of building envelopes in accordance with the current regulatory framework. Comparative thermal and moisture calculations were performed for internal insulation systems using mineral wool, hemp-based insulation, and cellular foam glass under identical climatic and operating conditions. Material properties were adopted in accordance with national standards, and specialized engineering software was used to ensure consistency and reproducibility of the calculation results.Results. The influence of internal insulation on the thermal and hygrothermal behavior of massive masonry walls typical of historic buildings was analyzed. The results show that insulation materials with comparable thermal resistance values may exhibit fundamentally different hygrothermal performance. Insulation systems with limited moisture-regulating capacity were found to be associated with seasonal moisture accumulation and the formation of an unbalanced annual moisture regime, whereas bio-based insulation materials demonstrated lower moisture accumulation and a more balanced hygrothermal behavior of the envelope. Furthermore, the application of cellular foam glass demonstrated a complete absence of interstitial condensation and zero seasonal moisture accumulation due to its closed-cell structure and high vapor diffusion resistance.Conclusions. The findings indicate that the effectiveness of internal insulation in historic buildings is determined not only by thermal resistance but primarily by the compatibility of insulation materials with the hygrothermal characteristics of traditional masonry. A comprehensive approach to internal thermal retrofitting is substantiated, combining energy efficiency requirements with hygrothermal reliability to ensure durability and long-term preservation of historic building structures.
- Open Access
- 2 April 2025
- Published by Politechnika Koszalinska in Rocznik Ochrona Środowiska
- Vol. 27, 196-210
Ensuring Energy Security in Ukraine: The Role of Cogeneration and Sustainable Funding for District Heating Systems
This article examines how to enhance energy security in Ukraine via increased efficiency and sustainability of district heating systems (DHS). It explores the role of combined heat and power (CHP) from a technical perspective and the sustainability of the funding from a financial standpoint, plays in securing energy security. Unlike specific technical/economic studies, this provides a comprehensive overview of technologies, funding, and policies for resilient Ukrainian DHS. The study highlights the critical impact of the ongoing conflict on Ukraine's thermal energy infrastructure and the need for modernization. Preventing system collapse is cheaper and faster than rebuilding. Moreover, small but strategic investments in DHS and CHP during critical periods ensure energy system survival, preventing irreversible damage and enabling long-term recovery. The article provides an overview analysis of existing heating technologies and assesses the feasibility of integrating modern solutions such as Power-to-Heat, Waste-to-Energy and explores distributed generation (biogas/biohydrogen and hydrogen fuel) for resilient energy production in Ukraine's DHS. It further explores funding mechanisms, highlighting the importance of international financing institutions (IFI), international partnerships, state support, non-governmental organizations (NGO), and humanitarian aid roles in advancing modernization efforts. Future research assesses cogeneration effectiveness under grant funding during crises and explores distributed generation for resilience. The study highlights the CHP's potential for increasing energy efficiency, reducing emissions, and enhancing energy security. It provides policy recommendations for market liberalization and infrastructure modernization, providing a framework for Ukraine's DHS transition toward renewable energy integration and energy system sustainability. The article concludes that a strategic approach – encompassing technological, economic, regulatory, and sustainable funding advancements – is essential for the long-term sustainability of energy systems in crisis.
- 2 April 2025
- Published by Politechnika Koszalinska in Rocznik Ochrona Środowiska
- Vol. 27, 196-210
Open AccessEnsuring Energy Security in Ukraine: The Role of Cogeneration and Sustainable Funding for District Heating Systems
This article examines how to enhance energy security in Ukraine via increased efficiency and sustainability of district heating systems (DHS). It explores the role of combined heat and power (CHP) from a technical perspective and the sustainability of the funding from a financial standpoint, plays in securing energy security. Unlike specific technical/economic studies, this provides a comprehensive overview of technologies, funding, and policies for resilient Ukrainian DHS. The study highlights the critical impact of the ongoing conflict on Ukraine's thermal energy infrastructure and the need for modernization. Preventing system collapse is cheaper and faster than rebuilding. Moreover, small but strategic investments in DHS and CHP during critical periods ensure energy system survival, preventing irreversible damage and enabling long-term recovery. The article provides an overview analysis of existing heating technologies and assesses the feasibility of integrating modern solutions such as Power-to-Heat, Waste-to-Energy and explores distributed generation (biogas/biohydrogen and hydrogen fuel) for resilient energy production in Ukraine's DHS. It further explores funding mechanisms, highlighting the importance of international financing institutions (IFI), international partnerships, state support, non-governmental organizations (NGO), and humanitarian aid roles in advancing modernization efforts. Future research assesses cogeneration effectiveness under grant funding during crises and explores distributed generation for resilience. The study highlights the CHP's potential for increasing energy efficiency, reducing emissions, and enhancing energy security. It provides policy recommendations for market liberalization and infrastructure modernization, providing a framework for Ukraine's DHS transition toward renewable energy integration and energy system sustainability. The article concludes that a strategic approach – encompassing technological, economic, regulatory, and sustainable funding advancements – is essential for the long-term sustainability of energy systems in crisis.
- Open Access
- 12 March 2025
- Published by Politechnika Koszalinska in Rocznik Ochrona Środowiska
- Vol. 27, 110-120
Parametric Analysis of Heat Flows Through Building Envelope Considering Orientation, Massiveness, and Intermittent Heating Modes
The study's objective is to conduct a parametric analysis of the components of the building's heat balance, and a parametric analysis of heat flows in buildings with different thermal and physical properties. To this end, a non-stationary multi-zone energy model of a multi-story building was developed, which was then utilized to ascertain the components of the energy balance of a pilot room under various temperature control regimes of the heating system, the massiveness of internal and exterior walls, the insulation of the exterior wall, and contingent on the purpose of the room. Two distinct types of building premises are distinguished: residential and commercial. The analysis revealed that representative rooms oriented towards the north exhibited a 34.8% higher energy consumption for heating needs when compared to rooms oriented towards the south for walls comprising a single brick and a 38.3% higher energy consumption for walls composed of three bricks. Implementing intermittent heating modes has been shown to reduce heat energy consumption by 13.8% and 14.6% for a one-brick exterior wall and 18.2% and 19.9% for a three-brick exterior wall, respectively, for residential and public buildings. The impact of altering the massiveness of internal walls on overall energy consumption is negligible. In contrast, the insulation of exterior walls and replacing windows with more energy-efficient ones exhibit a greater potential for reducing energy consumption in a building. A south-facing model with a constant heating mode in January demonstrated a 39.2% reduction in energy consumption for heating compared to a model lacking exterior wall insulation. Implementing additional intermittent heating modes can achieve energy savings of up to 22.3% for south-facing rooms and up to 21.4% for north-facing rooms. The findings of this study offer valuable insights into the regulation of heating modes in buildings with distinct characteristics in terms of exterior and internal wall composition.
- 12 March 2025
- Published by Politechnika Koszalinska in Rocznik Ochrona Środowiska
- Vol. 27, 110-120
Open AccessParametric Analysis of Heat Flows Through Building Envelope Considering Orientation, Massiveness, and Intermittent Heating Modes
The study's objective is to conduct a parametric analysis of the components of the building's heat balance, and a parametric analysis of heat flows in buildings with different thermal and physical properties. To this end, a non-stationary multi-zone energy model of a multi-story building was developed, which was then utilized to ascertain the components of the energy balance of a pilot room under various temperature control regimes of the heating system, the massiveness of internal and exterior walls, the insulation of the exterior wall, and contingent on the purpose of the room. Two distinct types of building premises are distinguished: residential and commercial. The analysis revealed that representative rooms oriented towards the north exhibited a 34.8% higher energy consumption for heating needs when compared to rooms oriented towards the south for walls comprising a single brick and a 38.3% higher energy consumption for walls composed of three bricks. Implementing intermittent heating modes has been shown to reduce heat energy consumption by 13.8% and 14.6% for a one-brick exterior wall and 18.2% and 19.9% for a three-brick exterior wall, respectively, for residential and public buildings. The impact of altering the massiveness of internal walls on overall energy consumption is negligible. In contrast, the insulation of exterior walls and replacing windows with more energy-efficient ones exhibit a greater potential for reducing energy consumption in a building. A south-facing model with a constant heating mode in January demonstrated a 39.2% reduction in energy consumption for heating compared to a model lacking exterior wall insulation. Implementing additional intermittent heating modes can achieve energy savings of up to 22.3% for south-facing rooms and up to 21.4% for north-facing rooms. The findings of this study offer valuable insights into the regulation of heating modes in buildings with distinct characteristics in terms of exterior and internal wall composition.
- Open Access
- 30 January 2025
- Published by Kyiv National University of Technologies and Design in Technologies and Engineering
- No. 5,p. 45-56
АНАЛІЗ ЗМІНИ ЗОВНІШНЬОЇ ТЕМПЕРАТУРИ ПОВІТРЯ РЕГІОНІВ УКРАЇНИ ЗІ СПЕЦІАЛЬНИМ ФОКУСОМ НА МОЖЛИВИХ ЕКСТРЕМАЛЬНИХ УМОВАХ
Метою статті є аналіз даних температури зовнішнього середовища з кліматичних баз даних України та Meteonorm з використанням історичних, поточних та прогнозованих даних для оцінки потенціалу використання відновлювальних джерел енергії. Методика включає використання методів синтезу та аналізу кліматичних даних. Результати включають аналіз температур зовнішнього середовища, як кліматичних данних, що мають найбільший вплив на енергоефективність будівель та забезпечення комфортності. Особлива увага приділена аналізу екстримальних погодних умов, таким як: хвилі спеки, тропічні ночі, морозні дні та холодні дні. В статті проведено порівняння нормативних та кліматичних даних за історичний та поточний періоди, а також майбутніх сценаріїв розвитку зміни температури зовнішнього середовища під впливом антропогенних факторів. Встановлено, що з кожним наступним сценарієм RCP 2.6, RCP 4.5, RCP 8.5 відбуватиметься швидше зростання середньорічної температура зовнішнього середовища. У Києві до 2100 року температура зовнішнього середовища згідно RCP 2.6, RCP 4.5, RCP 8.5 зросте на 1,2°C, 3,1°C, 5,8°C відповідно. У Одесі ріс температури до 2100 року відповідно RCP 2.6 стоновитиме 1,1°C, за RCP 4.5 – 2,9°C, за RCP 8.5 – 5,3°C. Результати також збільшення кількості теплових хвиль і тропічних ночей, та скорочення кількості морозних та холодних днів. Наукова новизна полягає у обґрунтуванні використання міжнародних кліматичних баз даних для проектування систем енергозабезпечення будівель з використанням відновлювальних джерел енергії в контексті змін клімату та діючої нормативної кліматології України. Практична значимість результаттів дослідження дозволяє оцінити відмінність кліматичних різних регіонів України, їх зміни в контексті історичного, поточного та майбутніх змін клімату. Також, в статті проведенно аналіз екстремальних погодних даних, що є актуальним в контексті проектування інженерних ситем та джерел будівель.
- 30 January 2025
- Published by Kyiv National University of Technologies and Design in Technologies and Engineering
- No. 5,p. 45-56
Open AccessАНАЛІЗ ЗМІНИ ЗОВНІШНЬОЇ ТЕМПЕРАТУРИ ПОВІТРЯ РЕГІОНІВ УКРАЇНИ ЗІ СПЕЦІАЛЬНИМ ФОКУСОМ НА МОЖЛИВИХ ЕКСТРЕМАЛЬНИХ УМОВАХ
Метою статті є аналіз даних температури зовнішнього середовища з кліматичних баз даних України та Meteonorm з використанням історичних, поточних та прогнозованих даних для оцінки потенціалу використання відновлювальних джерел енергії. Методика включає використання методів синтезу та аналізу кліматичних даних. Результати включають аналіз температур зовнішнього середовища, як кліматичних данних, що мають найбільший вплив на енергоефективність будівель та забезпечення комфортності. Особлива увага приділена аналізу екстримальних погодних умов, таким як: хвилі спеки, тропічні ночі, морозні дні та холодні дні. В статті проведено порівняння нормативних та кліматичних даних за історичний та поточний періоди, а також майбутніх сценаріїв розвитку зміни температури зовнішнього середовища під впливом антропогенних факторів. Встановлено, що з кожним наступним сценарієм RCP 2.6, RCP 4.5, RCP 8.5 відбуватиметься швидше зростання середньорічної температура зовнішнього середовища. У Києві до 2100 року температура зовнішнього середовища згідно RCP 2.6, RCP 4.5, RCP 8.5 зросте на 1,2°C, 3,1°C, 5,8°C відповідно. У Одесі ріс температури до 2100 року відповідно RCP 2.6 стоновитиме 1,1°C, за RCP 4.5 – 2,9°C, за RCP 8.5 – 5,3°C. Результати також збільшення кількості теплових хвиль і тропічних ночей, та скорочення кількості морозних та холодних днів. Наукова новизна полягає у обґрунтуванні використання міжнародних кліматичних баз даних для проектування систем енергозабезпечення будівель з використанням відновлювальних джерел енергії в контексті змін клімату та діючої нормативної кліматології України. Практична значимість результаттів дослідження дозволяє оцінити відмінність кліматичних різних регіонів України, їх зміни в контексті історичного, поточного та майбутніх змін клімату. Також, в статті проведенно аналіз екстремальних погодних даних, що є актуальним в контексті проектування інженерних ситем та джерел будівель.
- Open Access
- 24 May 2024
- Published by National Metallurgical Academy of Ukraine in Modern Problems of Metalurgy
- No. 27,p. 11-28
ENERGY CONSUMPTION OF THE SCHOOL UNDER CONDITIONS OF PARTIAL OCCUPANCY FOR DIFFERENT HEATING MODES
The challenges facing the Ukrainian education system, particularly in light of demographic changes and the impact of war, are examined in this research. It highlights the potential for optimizing the operation modes of school buildings under conditions of partial occupancy to reduce energy consumption and ensure comfortable conditions for students. Energy modeling analysis using DesignBuilder software shows that the configuration of classrooms significantly impacts the energy efficiency of buildings. The best results for energy efficiency were achieved with rooms stacked on top of each other, outperforming the variant with three rooms on the middle floor by 22.3%, and mixed configurations by 8.5% and 16%. This efficiency is due to minimized contact with unheated premises and maximized solar heat gains. However, without appropriate building upgrades, the use of limited spaces may not provide adequate comfort conditions in colder periods. For the rooms studied (45-48m2), the required heating device capacity to maintain comfortable conditions varies from 7.5 to 10.5 kW, depending on the level of insulation, which is 3-5 times more than the standard capacity for such spaces. Providing comfortable conditions without upgrading the heating system in cold periods is unfeasible, even with high levels of building insulation and a constant heating schedule. Therefore, implementing partial use of school buildings, despite their high potential for energy savings, cannot satisfy student comfort needs without corresponding improvements. Future research could provide a foundation for developing comprehensive strategies for managing school spaces, considering variable building usage conditions and ensuring an optimal combination of energy efficiency, cost-effectiveness, and comfort for students and staff. The findings can be useful for school administrations, local educational authorities, and policymakers in education and energy efficiency. Further studies are suggested to explore the impact of internal wall insulation, increased heating device capacity, and heating unconditioned rooms to a certain temperature level on energy efficiency and comfort conditions in occupied spaces.
- 24 May 2024
- Published by National Metallurgical Academy of Ukraine in Modern Problems of Metalurgy
- No. 27,p. 11-28
Open AccessENERGY CONSUMPTION OF THE SCHOOL UNDER CONDITIONS OF PARTIAL OCCUPANCY FOR DIFFERENT HEATING MODES
The challenges facing the Ukrainian education system, particularly in light of demographic changes and the impact of war, are examined in this research. It highlights the potential for optimizing the operation modes of school buildings under conditions of partial occupancy to reduce energy consumption and ensure comfortable conditions for students. Energy modeling analysis using DesignBuilder software shows that the configuration of classrooms significantly impacts the energy efficiency of buildings. The best results for energy efficiency were achieved with rooms stacked on top of each other, outperforming the variant with three rooms on the middle floor by 22.3%, and mixed configurations by 8.5% and 16%. This efficiency is due to minimized contact with unheated premises and maximized solar heat gains. However, without appropriate building upgrades, the use of limited spaces may not provide adequate comfort conditions in colder periods. For the rooms studied (45-48m2), the required heating device capacity to maintain comfortable conditions varies from 7.5 to 10.5 kW, depending on the level of insulation, which is 3-5 times more than the standard capacity for such spaces. Providing comfortable conditions without upgrading the heating system in cold periods is unfeasible, even with high levels of building insulation and a constant heating schedule. Therefore, implementing partial use of school buildings, despite their high potential for energy savings, cannot satisfy student comfort needs without corresponding improvements. Future research could provide a foundation for developing comprehensive strategies for managing school spaces, considering variable building usage conditions and ensuring an optimal combination of energy efficiency, cost-effectiveness, and comfort for students and staff. The findings can be useful for school administrations, local educational authorities, and policymakers in education and energy efficiency. Further studies are suggested to explore the impact of internal wall insulation, increased heating device capacity, and heating unconditioned rooms to a certain temperature level on energy efficiency and comfort conditions in occupied spaces.
- Open Access
- 30 March 2024
- Published by Walter de Gruyter GmbH in Latvian Journal of Physics and Technical Sciences
- Vol. 61 (2) , 44-65
Energy Performance of Higher Education Institutions Buildings Operating During Quarantine Restrictions and/or Martial Law in Ukraine
During the pandemic and periods of martial law, educational institutions in Ukraine implemented various forms of organising the educational process, combining in-person and remote classes. As a result, there has been a decrease in the level of use of building premises. The analysis of the characteristics of energy consumption in these conditions requires additional attention. In this study, a dynamic energy model of the building was created using the educational building of Igor Sikorsky Kyiv Polytechnic Institute as an example. Energy consumption for heating needs was determined for normal operating conditions and quarantine conditions in Ukraine (only a specific part of the premises is being operated, ensuring that the standard temperature value is maintained while people are present). Based on the results of the study, the features of the energy consumption of the building during quarantine/martial law restrictions, subject to the partial use of the building, were analysed, and the main disadvantages of such a mode were identified. For the educational building of the university, the total energy consumption for heating needs depends on the number of rooms that are actively used, and the modes of regulation of heating and ventilation; the consumption can decrease depending on the chosen scenario by 61 %, 56 %, and 34 % in quarantine mode. The findings indicate that the efficiency of regulation modes can decrease by more than four times when compared to normal mode due to internal heat exchange with unoccupied rooms.
- 30 March 2024
- Published by Walter de Gruyter GmbH in Latvian Journal of Physics and Technical Sciences
- Vol. 61 (2) , 44-65
Open AccessEnergy Performance of Higher Education Institutions Buildings Operating During Quarantine Restrictions and/or Martial Law in Ukraine
During the pandemic and periods of martial law, educational institutions in Ukraine implemented various forms of organising the educational process, combining in-person and remote classes. As a result, there has been a decrease in the level of use of building premises. The analysis of the characteristics of energy consumption in these conditions requires additional attention. In this study, a dynamic energy model of the building was created using the educational building of Igor Sikorsky Kyiv Polytechnic Institute as an example. Energy consumption for heating needs was determined for normal operating conditions and quarantine conditions in Ukraine (only a specific part of the premises is being operated, ensuring that the standard temperature value is maintained while people are present). Based on the results of the study, the features of the energy consumption of the building during quarantine/martial law restrictions, subject to the partial use of the building, were analysed, and the main disadvantages of such a mode were identified. For the educational building of the university, the total energy consumption for heating needs depends on the number of rooms that are actively used, and the modes of regulation of heating and ventilation; the consumption can decrease depending on the chosen scenario by 61 %, 56 %, and 34 % in quarantine mode. The findings indicate that the efficiency of regulation modes can decrease by more than four times when compared to normal mode due to internal heat exchange with unoccupied rooms.
- Open Access
- 22 March 2024
- Published by Kyiv National University of Technologies and Design in Technologies and Engineering
- No. 1,p. 25-39
ВЕНТИЛЯЦІЯ ЯК СКЛАДОВА ЕНЕРГЕТИЧНОГО ДИНАМІЧНОГО БАЛАНСУ В БУДІВЛЯХ
Purpose. The research aims to analyze dynamic energy modeling of buildings using EnergyPlus and DesignBuilder software. The primary goal is to assess the energy efficiency, indoor air quality, and energy balance of buildings, taking into account various aspects such as ventilation and dynamic changes in temperature and humidity. Methodology. EnergyPlus and DesignBuilder software were utilized to create detailed dynamic models of buildings. Special attention was given to modeling ventilation and studying the energy balance. Various ventilation modeling algorithms were compared to determine their impact on energy efficiency. Findings. Energy flows in buildings based on dynamic energy balances for the heating period were investigated. A detailed analysis of the influence of ventilation on dynamic energy balances in the studied residential building room was conducted. Originality. This research offers a new perspective on dynamic energy modeling of buildings, expanding knowledge in this field by focusing on ventilation and energy balance aspects. The results contribute significantly to the development of approaches to improve energy efficiency, creating new opportunities for practical applications in engineering design and building operation. Practical value. The obtained results are an important contribution for engineers and designers developing strategies to reduce energy consumption and optimize energy use in buildings. The research can serve as a guide for the practical implementation of dynamic modeling in the planning and operation of buildings to achieve optimal energy efficiency. Мета. Дослідження спрямоване на аналіз динамічного енергетичного моделювання будівель з використанням програмного забезпечення EnergyPlus та DesignBuilder. Основна мета полягає в оцінці енергетичної ефективності, повітряної якості та енергетичного балансу будівель з врахуванням різноманітних аспектів, таких як повітрообмін та динамічні зміни в температурі та вологості. Методика. В роботі використовувались програми EnergyPlus та DesignBuilder для створення детальних динамічних моделей будівель. Основна увага приділялась моделюванню повітрообміну та вивченню енергетичного балансу. Різні алгоритми моделювання повітрообміну порівнювались для визначення їх впливу на енергетичну ефективність. Результати. Досліджено енергетичні потоки в будівлях на основі динамічних енергетичних балансів для періоду опалення. Проведено поглиблений аналіз впливу повітрообміну в динамічних енергетичних балансах досліджуваної кімнати житлової будівлі. Наукова новизна. Це дослідження пропонує новий погляд на динамічне енергетичне моделювання будівель, розширюючи знання в цій галузі через спрямовану увагу на аспекти повітрообміну та енергетичного балансу. Результати внесуть важливий вклад у розвиток підходів до підвищення енергоефективності, створюючи нові можливості для практичного застосування в інженерному проектуванні та будівельній експлуатації. Практична значимість. Отримані результати є важливим внеском для інженерів та проектувальників, розробляючи стратегії зменшення енергоспоживання та оптимізації енергетичного споживання будівель. Дослідження може слугувати вказівником для практичного впровадження динамічного моделювання в плануванні та експлуатації будівель для досягнення оптимальної енергоефективності.
- 22 March 2024
- Published by Kyiv National University of Technologies and Design in Technologies and Engineering
- No. 1,p. 25-39
Open AccessВЕНТИЛЯЦІЯ ЯК СКЛАДОВА ЕНЕРГЕТИЧНОГО ДИНАМІЧНОГО БАЛАНСУ В БУДІВЛЯХ
Purpose. The research aims to analyze dynamic energy modeling of buildings using EnergyPlus and DesignBuilder software. The primary goal is to assess the energy efficiency, indoor air quality, and energy balance of buildings, taking into account various aspects such as ventilation and dynamic changes in temperature and humidity. Methodology. EnergyPlus and DesignBuilder software were utilized to create detailed dynamic models of buildings. Special attention was given to modeling ventilation and studying the energy balance. Various ventilation modeling algorithms were compared to determine their impact on energy efficiency. Findings. Energy flows in buildings based on dynamic energy balances for the heating period were investigated. A detailed analysis of the influence of ventilation on dynamic energy balances in the studied residential building room was conducted. Originality. This research offers a new perspective on dynamic energy modeling of buildings, expanding knowledge in this field by focusing on ventilation and energy balance aspects. The results contribute significantly to the development of approaches to improve energy efficiency, creating new opportunities for practical applications in engineering design and building operation. Practical value. The obtained results are an important contribution for engineers and designers developing strategies to reduce energy consumption and optimize energy use in buildings. The research can serve as a guide for the practical implementation of dynamic modeling in the planning and operation of buildings to achieve optimal energy efficiency. Мета. Дослідження спрямоване на аналіз динамічного енергетичного моделювання будівель з використанням програмного забезпечення EnergyPlus та DesignBuilder. Основна мета полягає в оцінці енергетичної ефективності, повітряної якості та енергетичного балансу будівель з врахуванням різноманітних аспектів, таких як повітрообмін та динамічні зміни в температурі та вологості. Методика. В роботі використовувались програми EnergyPlus та DesignBuilder для створення детальних динамічних моделей будівель. Основна увага приділялась моделюванню повітрообміну та вивченню енергетичного балансу. Різні алгоритми моделювання повітрообміну порівнювались для визначення їх впливу на енергетичну ефективність. Результати. Досліджено енергетичні потоки в будівлях на основі динамічних енергетичних балансів для періоду опалення. Проведено поглиблений аналіз впливу повітрообміну в динамічних енергетичних балансах досліджуваної кімнати житлової будівлі. Наукова новизна. Це дослідження пропонує новий погляд на динамічне енергетичне моделювання будівель, розширюючи знання в цій галузі через спрямовану увагу на аспекти повітрообміну та енергетичного балансу. Результати внесуть важливий вклад у розвиток підходів до підвищення енергоефективності, створюючи нові можливості для практичного застосування в інженерному проектуванні та будівельній експлуатації. Практична значимість. Отримані результати є важливим внеском для інженерів та проектувальників, розробляючи стратегії зменшення енергоспоживання та оптимізації енергетичного споживання будівель. Дослідження може слугувати вказівником для практичного впровадження динамічного моделювання в плануванні та експлуатації будівель для досягнення оптимальної енергоефективності.