HSHjalti H. Sigmarsson

Hjalti H. Sigmarsson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hjalti H. Sigmarsson has a total of 100 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ultra-Miniaturized, High-Q Embedded Loaded Coaxial Substrate Integrated Waveguide Filter

    by Nawaf R. Almuqati, Gokhan Ariturk, Hjalti H. Sigmarsson

    This paper presents an ultra-miniaturized and high-quality factor embedded loaded coaxial substrate integrated waveguide (ELCSIW) filter. Integrating a substrate-integrated coaxial resonator with a capacitively loaded air cavity achieves a 99% reduction in size compared to a conventional SIW cavity. Incorporating an air gap in the capacitive loading structure significantly enhances the resonator’s quality factor. A comprehensive analysis of the miniaturization factor and quality factor in relation to cavity structure dimensions is performed. Guidelines for fabricating the highly loaded cavity are presented. To demonstrate the benefits of this technique, a two-pole band-pass filter with a 6.3% bandwidth at 1.1 GHz is designed, fabricated, and measured. The overall footprint of the filter is 10.5 mm × 20.5 mm, which is comparable to 0.07 λg× 0.14 λg. The measured insertion loss is 0.54 dB, and the upper band is spurious-free up to 7 times the resonant frequency. The exceptional performance and compactness of the loaded coaxial substrate integrated waveguide cavities highlight their immense potential for compact advanced wireless systems.

  • Generalized Theory and Realization of Reconfigurable Bandpass Filtering Equalizers

    by Jonathan M. Knowles, Russell H. Kenney, Hjalti H. Sigmarsson

    In this article, a generalized theory of bandpass filtering equalizers is proposed. A filtering equalizer is a device that combines the frequency-selective properties of a filter with the controllable slope of an equalizer into a single component. The equations used to design the function for a desired slope are provided, and the design methodology to determine the necessary filtering polynomials is also shown. The controllable slope of the dual-function component is realized using variable capacitors, which are used to tune both a transmission zero and a matching network to achieve the desired slope. A third-order bandpass filtering equalizer is designed, fabricated, and measured to verify the generalized theory. The component is designed to operate at 1 GHz with a slope that can be reconfigured from 1 to 3 dB along the passband. This proposed filtering equalizer demonstrates the feasibility of a tunable, low-cost, size, weight, and power (C-SWaP) solution to enable increased flatness in the overall system response and thereby decrease the error vector magnitude (EVM) of future radio frequency (RF) systems and a design process that allows for future development of filtering equalizers.


  • An Innovative H-Plane Filtering Horn Antenna in Substrate-Integrated Waveguide Technology

    by I. Suryarajitha, Rushiraj Jawale, Gowrish Basavarajappa, Hjalti H. Sigmarsson, Rajib Kumar Panigrahi, M. V. Kartikeyan

    In this work, we propose a method for designing an innovative H-plane filtering horn antenna (FHA) based on Substrate Integrated Waveguide (SIW) technology. The approach integrates a bandpass filter directly into the flared section of the horn antenna, thus resulting in an efficient compact multi-functional filtering antenna. To demonstrate the concept, a third-order SIW H-plane FHA with an iris-coupled filtering structure is designed, fabricated, and tested at 5.8 GHz, achieving a 3% fractional bandwidth. The proposed approach significantly enhances the efficiency of conventional horn antenna from a modest 9.2% to 41.3%. The design concept is further extended to millimeter-wave frequencies with an E-plane metal septum filtering structure, where a second-order H-plane FHA centered at 28GHz is designed. Furthermore, the proposed design methodology is systematic and scalable to realize higher order FHA. Additionally, this approach offers substantial size and volume reductions, along with integrated multi-functionality, promoting overall system miniaturization.


  • A Novel Multifunctional E-Plane Metal Septum-Based Filtering Horn Antenna

    by Rushiraj Jawale, Suryarajitha Inapurapu, Gowrish Basavarajappa, Hjalti Sigmarsson

    In this letter, we have presented a novel multifunctional E-plane metal septum-based filtering horn antenna in rectangular waveguide technology. The proposed design methodology is systematic and scalable to realize higher order filtering response. For the validation of the concept, a 4th order filtering E-plane horn antenna is designed, fabricated and tested at 10 GHz with a fractional bandwidth of 2% and realized gain of 11 dBi. The realized gain of the filtering horn antenna is identical to that of the conventional horn antenna. The proposed design leads to significant savings in mass and volume, and hence contributes to system miniaturization especially beneficial in aero-space applications.


  • An Innovative Design Methodology of a Novel Multifunctional All-Pole Filtering Horn Antenna

    by Kalyan Mohan Patnaik, Gowrish Basavarajappa, Hjalti Sigmarsson

    This letter presents a novel multifunctional all-pole filtering horn antenna in rectangular waveguide technology using an innovative design methodology. The proposed design methodology is not only systematic but also scalable to realize higher order filtering responses. For proof of concept, a fifth-order filtering pyramidal horn antenna is designed and fabricated at 10 GHz with a fractional bandwidth of 4% and realized a gain of 13.5 dBi. The realized gain of the filtering horn antenna is identical to that of the conventional horn antenna. The proposed invention leads to significant savings in size and volume and hence contributes to system miniaturization.


  • Full Bandpass Filter Reconfigurability Through Liquid Metal Tuning and a Novel External Coupling Technique

    by Alex Pham, Hjalti H. Sigmarsson

    An innovative filter design with full independent control of the center frequency, bandwidth, and response ripple is demonstrated utilizing only liquid-metal actuation. This is realized on substrate-integrated waveguide (SIW) technology with tunable evanescent cavity resonators coupled by an adaptable inductive iris design. A novel external coupling mechanism utilizing liquid-metal tuning posts on the filter input/output is presented. The fully reconfigurable filter design has a center frequency tuning range of 4.5–5.6 GHz with bandwidths ranging from 198 to 599 MHz. The response shape is reconfigurable between Butterworth and equi-ripple responses at all frequency and bandwidth states. Agreement between experimental results and simulation validate the effectiveness of this highly reconfigurable filter design and the capabilities of liquid metal for adaptive coupling mechanisms.


  • Varactor-Tuned Superstrate-Loaded Antenna and Filtenna for X-Band Applications

    by Rosalind Agasti, Daniel C. Nichols, Andrew M. Eck, Hjalti H. Sigmarsson, Jessica E. Ruyle

    This paper presents a novel superstrate-loaded frequency-agile cavity-backed slot antenna (CBSA) and filtenna for X-band (8-12 GHz) applications. The antenna is designed by combining the electromagnetic fields of a half-mode cavity and a radiating slot operating in their fundamental modes. Frequency tuning is achieved using a single varactor mounted on a superstrate to form a capacitive tuning network above the slot aperture. The superstrate design provides a simple yet effective means to reconfigure the frequency using fewer tuning elements, lower losses, and improved biasing feasibility than other semiconductor-based tunable slot antennas. Two in-house manufactured prototypes of the antenna, implemented using substrate-integrated waveguide (SIW) technology, demonstrated tuning ranges of 7.8-11.1 GHz (35%) and 9.6-11.1 GHz (14.5%). Finally, the proposed superstrate-loaded antenna element is co-designed with a contactless-tuned evanescent-mode (EVA-mode) cavity resonator within a filtenna unit. Due to the integrated filtering capability, the out-of-band radiation suppression is better than 20 dB across the tuning range. The filtenna presented in this paper is the first in the literature to be implemented using high-Q cavities and SIW technology for applications above 6 GHz. Compared to other cavity-based SIW implementations at the X-band frequency range, the electronically-tuned SIW-based antennas and filtenna presented in this paper demonstrate the largest frequency tuning ranges with fast tuning speeds while maintaining a compact module.


  • Open Access

    Reduced Navigation Error Using a Multi-Sensor Fusion Technique and Its Application in Synthetic Aperture Radar

    by Brian M. Sun, Russell H. Kenney, Mark B. Yeary, Hjalti H. Sigmarsson, Jay W. McDaniel

    Modern navigation solutions rely on a combination of inertial measurement units (IMUs) and a global navigation satellite system (GNSS) receiver to estimate a navigating body's position. In order to produce a high-fidelity solution, the current approach is to utilize a single ultra-low bias navigational grade IMU in the system. However, these high-quality IMUs are expensive, bulky, heavy, and require significant power consumption. This article proposes the fusion of multiple lower-quality IMUs to achieve near-identical or better positional accuracy as a single high-quality sensor to minimize cost, size, weight, and power (C-SWaP) without sacrificing the positional estimation accuracy. The primary focus is on a generalized method to fuse multiple position estimations from multiple co-located IMUs for a single navigating body. The proposed fusion algorithm is applied to simulated data produced by three precision micro-electromechanical systems (MEMS) grade IMU modules (Analog Devices ADIS16465) from two different simulated flight paths. The absolute error is calculated between the position estimation generated by the proposed algorithm and the “truth” position provided by the simulation to determine the accuracy of the final result. The error of the proposed algorithm using the Analog Devices modules is then compared to the error between a single navigational grade IMU (NovAtel IMU-ISA-100 C) and the simulated “truth” position. The results show that using only three precision MEMS grade IMUs; the proposed method can produce identically accurate position estimations as a navigational grade IMU while drastically reducing C-SWaP. This result is further validated in measured data from an instrumented test setup using the above mentioned IMU configurations fused with a standard GPS and compared to a real-time kinematic GNSS setup used as a the third-party ground truth. In addition, the proposed method is further validated by integrating the two navigation systems with a Ku-band radar to produce synthetic aperture radar images. The image produced using the multi-IMU configuration as opposed to the navigation-grade IMU is more focused. Given these results, the proposed method has been validated in theory, simulation, and measurement, resulting in an order of magnitude reduction in cost, size, and power consumption, as well as a three-and-a-half times weight reduction of the overall IMU solution.


  • Exact Synthesis of Hybrid Acoustic–Electromagnetic Filters With Wideband Chebyshev Responses

    by Gokhan Ariturk, Nawaf R. Almuqati, Yao Yu, Ernest Ting-Ta Yen, Adam Fruehling, Hjalti H. Sigmarsson

    Conventional synthesis methods used in the design of acoustic-wave (AW) microwave filters suffer from limited achievable fractional bandwidth (FBW) and weak out-of-band (OOB) rejection. This work presents the complete polynomial-based synthesis of a new class of hybrid acoustic–electromagnetic (hybrid-ACEM) filters to overcome both of the limitations by employing one or two electromagnetic (EM) resonators that are placed at purposefully selected locations within the design. In addition, cross-coupling mechanisms can help significantly with reducing the required electromechanical coupling coefficient in certain filter orders. Altogether, the proposed method can achieve much larger FBW values and stronger OOB rejection compared to the conventionally synthesized ladder AW filters. The effect of the finite quality factor of the EM resonators is analyzed. It is shown with the simulations that a filter for the 5g n77 band can be designed with AW resonators having $k_t^2$ values of as low as 7.3%, while the quality factor values of the EM resonators are 50. As a proof of concept, a sixth-order hybrid-ACEM prototype with a center frequency of 2.66 GHz and an FBW of 11.2% designed and fabricated using AW resonators with $k_t^2$ values of 3.5%. A comparison table shows larger achievable FBW-to- $k_t^2$ ratios compared to similar studies in the literature.


  • Open Access

    New Analysis and Design Techniques for Arbitrary Reactance Trap Dipoles

    by Paul R. Winniford, Adrian L. Bauer, Hjalti H. Sigmarsson, Jessica E. Ruyle

    The work presents a significantly revised analysis of a classic resonator loaded antenna – the trap dipole. The authors demonstrate in calculation, simulation, and measurement that trap dipoles antennas are not matched or resonant at the same frequency as the trap load resonance. The new analysis unites traditional high impedance trap loads with a wide variety of resonant and reactive loads to achieve multiband antenna performance with quasi-first order field distributions at the operating frequencies. The revised analysis enables the trap dipole to be expanded into a new framework for the design of a wide variety of multi-band or reconfigurable resonator loaded antennas.