Pavel Maxera
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pavel Maxera has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Christoph Kogler
BOKU University
3 shared publications - Jakub Woletz
Brno University of Technology
2 shared publications - Juraj Pancik
Institute of Forensic Engineering, Brno University of Technology, Purkyňova, 464/118, Brno 61200, Czech Republic
2 shared publications A. Bradáč
1 shared publication- Andrea Němcová
Brno University of Technology
1 shared publication Branislav Hesko
Department of Biomedical Engineering, Faculty of Electrical Engineering and Communication, Brno University of Technology, Brno, Czech Republic
1 shared publication
Latest Publications
- Open Access
- 31 July 2026
- Published by Taylor & Francis in Journal of Simulation
- p. 1-24
The importance of verification, validation, and credibility in discrete simulation models for resilient freight transportation and terminal logistics: a literature review
1. Supply chains, with their interrelated financial, information, and material flows, place high demands on logistics and freight transportation in an increasingly globalized and digitalized world....
- 31 July 2026
- Published by Taylor & Francis in Journal of Simulation
- p. 1-24
Open AccessThe importance of verification, validation, and credibility in discrete simulation models for resilient freight transportation and terminal logistics: a literature review
1. Supply chains, with their interrelated financial, information, and material flows, place high demands on logistics and freight transportation in an increasingly globalized and digitalized world....
- Open Access
- 20 May 2025
- Published by Taylor & Francis in Journal of Simulation
- Vol. 20 (1) , 110-134
A literature review of supply chain analyses integrating discrete simulation modelling and machine learning
- 20 May 2025
- Published by Taylor & Francis in Journal of Simulation
- Vol. 20 (1) , 110-134
Open AccessA literature review of supply chain analyses integrating discrete simulation modelling and machine learning
- 29 April 2025
- Published by Springer Nature
- p. 128-135
Validation and Verification Techniques in Simulation Modelling for Freight Transportation
- 29 April 2025
- Published by Springer Nature
- p. 128-135
Validation and Verification Techniques in Simulation Modelling for Freight Transportation
- Top Cited Papers
- 10 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 22 (6) , 3214-3233
Multimodal Features for Detection of Driver Stress and Fatigue: Review
Driver fatigue and stress significantly contribute to higher number of car accidents worldwide. Although, different detection approaches have been already commercialized and used by car producers (and third party companies), research activities in this field are still needed in order to increase the reliability of these alert systems. Also, in the context of automated driving, the driver mental state assessment will be an important part of cars in future. This paper presents state-of-the-art review of different approaches for driver fatigue and stress detection and evaluation. We describe in details various signals (biological, car and video) and derived features used for these tasks and we discuss their relevance and advantages. In order to make this review complete, we also describe different datasets, acquisition systems and experiment scenarios.
- 10 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 22 (6) , 3214-3233
Top Cited PapersMultimodal Features for Detection of Driver Stress and Fatigue: Review
Driver fatigue and stress significantly contribute to higher number of car accidents worldwide. Although, different detection approaches have been already commercialized and used by car producers (and third party companies), research activities in this field are still needed in order to increase the reliability of these alert systems. Also, in the context of automated driving, the driver mental state assessment will be an important part of cars in future. This paper presents state-of-the-art review of different approaches for driver fatigue and stress detection and evaluation. We describe in details various signals (biological, car and video) and derived features used for these tasks and we discuss their relevance and advantages. In order to make this review complete, we also describe different datasets, acquisition systems and experiment scenarios.
- Open Access
Control of Hydraulic Pulse System Based on the PLC and State Machine Programming
In this paper, we deal with a simple embedded electronic system for an industrial pneumatic–hydraulic system, based on a low-cost programmable logic controller (PLC) and industrial electronic parts with 24 V logic. The developed system is a hydraulic pulse system and generates a series of high-pressure hydraulic pulses with up to a max. 200 bar output pressure level and with up to a max. 2 Hz output hydraulic pulses frequency. In this paper we are describing requirements, the concept of the embedded control system in a diagram, security features and its industrial network connectivity (CAN bus, MODBUS). In description of the software solution we describe the implementation of the program threads approach in this low-cost PLC. The PLC programming with threads generate two layers of services—physical and application layer, and as a result, the threads create the main control state machine. In conclusion, we describe the calibration method of the system and the calibration curves. For further study we offer readers the full programming code written in sequential function charts to be used as PLC language. The cost of the described industrial networked control system with industry standard optoelectronic insulated interfaces and certified industrial safety relay does not exceed €1000 Euros.
Open AccessControl of Hydraulic Pulse System Based on the PLC and State Machine Programming
In this paper, we deal with a simple embedded electronic system for an industrial pneumatic–hydraulic system, based on a low-cost programmable logic controller (PLC) and industrial electronic parts with 24 V logic. The developed system is a hydraulic pulse system and generates a series of high-pressure hydraulic pulses with up to a max. 200 bar output pressure level and with up to a max. 2 Hz output hydraulic pulses frequency. In this paper we are describing requirements, the concept of the embedded control system in a diagram, security features and its industrial network connectivity (CAN bus, MODBUS). In description of the software solution we describe the implementation of the program threads approach in this low-cost PLC. The PLC programming with threads generate two layers of services—physical and application layer, and as a result, the threads create the main control state machine. In conclusion, we describe the calibration method of the system and the calibration curves. For further study we offer readers the full programming code written in sequential function charts to be used as PLC language. The cost of the described industrial networked control system with industry standard optoelectronic insulated interfaces and certified industrial safety relay does not exceed €1000 Euros.
- Open Access
- 17 September 2018
- Published by MDPI AG in Preprints.org
Control of Hydraulic Pulse System Based on the PLC and State Machine Programming
In the paper is described the control electronics for an industrial pneumatic – hydraulic system based on a low-cost PLC. The developed system is a hydraulic pulse system and it generates series of high pressure hydraulic pulses (max. 200 bar). We describe requirements, an overall concept of the embedded control system, user interface, security features and network connectivity. In the description of the software solution we describe implementation of hierarchical ordered program threads (multithreaded program) and main control state machine. At the conclusion, we describe the calibration method of the system and calibration curves and we present the schematic diagram and a photo of a functional prototype of the system.
- 17 September 2018
- Published by MDPI AG in Preprints.org
Open AccessControl of Hydraulic Pulse System Based on the PLC and State Machine Programming
In the paper is described the control electronics for an industrial pneumatic – hydraulic system based on a low-cost PLC. The developed system is a hydraulic pulse system and it generates series of high pressure hydraulic pulses (max. 200 bar). We describe requirements, an overall concept of the embedded control system, user interface, security features and network connectivity. In the description of the software solution we describe implementation of hierarchical ordered program threads (multithreaded program) and main control state machine. At the conclusion, we describe the calibration method of the system and calibration curves and we present the schematic diagram and a photo of a functional prototype of the system.
- Open Access
- 20 June 2018
- Published by STEF92 Technology
- Vol. 18
EVALUATION OF ENVIRONMENTAL LIMIT STATES AT APPRAISEMENT OF TRUCKS
- 20 June 2018
- Published by STEF92 Technology
- Vol. 18
Open AccessEVALUATION OF ENVIRONMENTAL LIMIT STATES AT APPRAISEMENT OF TRUCKS