Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Bo Dong has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Multimodal fluorescence-coherence monitoring of polymer curing

    by Zihao Ni, Ruixin Feng, Kan Xie, Yulei Bai, Bo Dong

    This Letter presents a multimodal monitoring method based on combined fluorescence-coherence imaging for surface-interior polymer curing. The wavelength-selective absorption of fluorescence speckles is introduced to overcome speckle occlusion, and three spectral channels are developed to eliminate signal crosstalk with ultraviolet excitation, blue-speckle surface imaging, and near-infrared tomography. For validation, a dedicated system integrating fluorescent digital image correlation (FDIC) and optical coherence tomography (OCT) is custom-built to measure the curing process. The result highlights significant advantages in spatial and mechanistic measurement. By resolving deformation from surface to interior, the depth-dependent response of local curing behaviors is demonstrated. Moreover, by merging FDIC’s macroscopic stability and OCT’s microscopic sensitivity, this method realizes mechanism coverage that is unattainable by either technique alone.

  • Open Access

    Adaptive Phase-Sensitive OCT for Depth-Resolved Measurement of Polymer Curing Kinetics: Overcoming Dynamic Range Limitations

    by Bo Dong, Kang Yang, Zhaoshui He, Shengli Xie, Yulei Bai

    This paper presents a systematic comparison between digital image correlation-based (DIC-) and phase-sensitive (PhS-) optical coherence tomography (OCT) for depth-resolved polymer curing metrology, explicitly addressing the inherent trade-off between measurement sensitivity and dynamic range. Theoretical and experimental evaluations reveal that while DIC-OCT offers a large dynamic range, its strain sensitivity (order of 10-4) is insufficient for resolving subtle micro-deformations, particularly in deep regions where speckle contrast attenuates. Conversely, standard PhS-OCT achieves superior sensitivity (order of 10-6) but is severely constrained by spatial phase aliasing during rapid deformation stages. To overcome this limitation, we propose a curing-rate-based adaptive inter-frame interval strategy. By dynamically optimizing the temporal sampling step based on the instantaneous phase gradient, this method ensures phase measurability during rapid reactions while minimizing noise accumulation during slow stages. Validations on a bilayer polymer droplet and a dental resin restoration demonstrate that the adaptive PhS-OCT achieves high-fidelity strain reconstruction. Quantitatively, the proposed strategy reduces the root-mean-square error (RMSE) by approximately 22% compared to conventional fixed-step incremental methods and eliminates the stratification artifacts observed in DIC-OCT. These results establish adaptive PhS-OCT as a robust tool that combines high sensitivity with extended dynamic range for precise material characterization.

  • Dual-channel single-spectrometer chromatic confocal coherence sensing to mitigate bandwidth compression in film thickness and refractive-index measurement

    by Guanggao Zhou, Yulei Bai, Shengli Xie, Bo Dong

    A dual-channel single-spectrometer chromatic confocal coherence sensor is proposed for simultaneous measurement of film thickness and refractive index. Compared with the conventional single-channel single-spectrometer approach, the proposed method converts the multiplicative coupling between interferometric and confocal signals into an additive form by introducing an additional detection channel and eliminating the need for an external reference arm. As a result, the optical thickness resolution is improved by one order of magnitude. For validation, a sensor system is established, and film specimens with different materials and thicknesses are measured. The results demonstrate that the dual-channel configuration introduces no additional structural complexity while improving the optical thickness resolution from 50 µm to 5 µm, with film thickness and refractive-index measurement errors less than 11 µm and 0.02, respectively.

  • 3D-BNN-accelerated phase tracking with optimal sub-region selection for high-dynamic-range OCE

    by Yulei Bai, Yuanyang Zhu, ZiHao Ni, Zhaoshui He, Shengli Xie, Bo Dong

    Phase decorrelation can limit the dynamic range of phase-sensitive optical coherence elastography (PhS-OCE). Here, we reported a three-dimensional (3D) Bayesian neural network with an optimized sub-region size determination approach to overcome phase decorrelation rapidly in 3D-PhS-OCE. Our method can automatically provide a reasonable sub-region size as small as possible without requiring any prior knowledge. As a result, 3D pixel-level offsets induced by large deformations can be tracked rapidly, benefiting from both the smaller matching subregion and the network’s parallel computing capability. The results demonstrate that the proposed 3D-BNN with optimal sub-region size determination improves computational efficiency by about 24% over the empirical 3D-BNN and by 26 times over the PVC method.

  • Discontinuous wavelength-scanning interferometry with an unknown gapped spectrum

    by Yulei Bai, Hao Qiu, Zean Huang, Zhaoshui He, Shengli Xie, Bo Dong

    Depth-resolved wavelength-scanning interferometry (DRWSI) has emerged as a powerful topographic technique for simultaneously measuring multiple surfaces. Conventional DRWSI requires the laser to emit a continuous spectrum; however, ensuring this condition is often challenging. This Letter presents a discontinuous DRWSI measurement approach that can automatically predict the missing intensity within the gapped spectrum without requiring any prior knowledge. Therefore, the phase jitters caused by the discontinuities in wavelength scanning can be effectively removed, enabling high-quality reconstruction of the depth-resolved phase maps. Simulation demonstrated that the proposed approach can accurately restore the phase map even when the gap interval is 10 times larger than the entire wavelength-scanning range. Experimental results confirm the robustness of this approach for discontinuous DRWSI measurements under mode-hopping laser outputs. The contribution of this work can alleviate the stringent requirements for the diode laser output, enhancing the flexibility and practicality of DRWSI measurements.


  • Adaptive decorrelation compensation approach in digital-image-correlation-assisted phase-sensitive optical coherence tomography

    by Bo Dong, Yulei Bai, Zhaoshui He, Shengli Xie

    This work demonstrates that the phase-based decorrelation compensation method outperforms the amplitude-based approach in low signal-to-noise ratio (SNR) regions of phase-sensitive optical coherence tomography (PhS-OCT). Building on this finding, an adaptive decorrelation compensation approach for digital-image-correlation (DIC)-assisted PhS-OCT is introduced. This method utilizes the maximum correlation coefficient from amplitude maps to adaptively determine the need for secondary tracking of decorrelated displacement using the phase-based approach. It significantly improves decorrelation compensation quality while minimizing impacts on computational efficiency. A tensile testing experiment was conducted to validate the method, with results showing that the proposed adaptive compensation method enables previously unmeasurable low SNR regions to become measurable by adaptively retracking only 21.7% of the area.


  • Phase volume correlation approach for overcoming decorrelation in three-dimensional phase-sensitive optical coherence elastography

    by Zihao Ni, Shengli Xie, Yuanyang Zhu, Zhaoshui He, Bo Dong, Yulei Bai

    The dynamic measurement range in phase-sensitive optical coherence elastography (PhS-OCE) is limited for the phase decorrelation induced by pixel-level displacements in precision measurement, where the consideration of the time-resolved incremental method and in-plane pixels tracking method is insufficient to recover the phase holistically. This work presented a phase volume correlation (PVC) approach to handle the phase decorrelation in three-dimensional PhS-OCE. By utilizing the ability of the discontinuous source diagram to quantify voxel phase correlation levels, the PVC establishes a wrapped phase-matching equation aimed at optimizing the number of volumetric source distributions. The three-dimensional pixel-level motions in the deformed phase space can be evaluated by solving the optimization model for phase matching, thereby enabling the reconstruction of the volumetric phase variation corrupted by decorrelation. The large deformations experiments including diffident loadings, i.e., stretching, three-point bending, and light-cured, verified the proposed PPVC approach's of feasibility, reliability, and stability. The contribution of this work can dramatically enhance the dynamic measuring range in three-dimensional PhS-OCE.


  • Bayesian-neural-network-based strain estimation approach for optical coherence elastography

    by Yulei Bai, Kangyang Zhang, Rui Mo, Zihao Ni, Zhaoshui He, Shengli Xie, Bo Dong

    Strain estimation is critical for quantitative elastography in quasi-static phase-sensitive optical coherence elastography (PhS-OCE). Deep-learning methods have achieved exceptional performance in estimating high-quality strain distributions. However, they cannot often assess their predictive accuracy and reliability rigorously. To navigate these challenges, a Bayesian-neural-network (BNN)-based strain estimation is proposed. The method can provide the uncertainty distribution of the results beyond achieving high-quality strain estimation. Such an uncertainty distribution can assess the reliability of the strain results. Moreover, the uncertainty degree can function as an indicator for compensating for phase decorrelation and thus significantly enhancing the SNR and dynamic range of PhS-OCE. Thermal and three-point bending deformation experiments validated that the predicted uncertainty distribution can effectively address phase decorrelation and allow for a more comprehensive understanding of the estimated strain results.


  • Digital image correlation-assisted phase-sensitive optical coherence tomography

    by Bo Dong, Rui Wu, Zihao Ni, Shengli Xie, Yulei Bai

    In this Letter, we introduce a digital image correlation-assisted (DIC-assisted) method to tackle the challenges of phase decorrelation and the inability to measure lateral displacement in phase-sensitive optical coherence tomography (PhS-OCT). This DIC-assisted PhS-OCT (DIC-PhS-OCT) first employs DIC to track displacements from the measured amplitude spectra and subsequently uses these tracked displacements to correct supra-pixel displacement offsets in the measured phase spectra. As a result, it effectively mitigates phase decorrelation resulting from both axial and lateral displacements while enabling the acquisition of sub-pixel-level lateral displacements during the DIC computation. Our experiments demonstrate the effectiveness of DIC-PhS-OCT in addressing these challenges while retaining the ultrahigh sensitivity of conventional PhS-OCT.