HTHai Le The

Hai Le The

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hai Le The has a total of 106 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Transwell‐Integrated 2 µm Thick Transparent Polydimethylsiloxane Membranes with Controlled Pore Sizes and Distribution to Model the Blood‐Brain Barrier

    by Mariia Zakharova, Martijn P. Tibbe, Lena S. Koch, Hai Le‐The, Anne M. Leferink, Albert van Den Berg, Andries D. van der Meer, Kerensa Broersen, Loes I. Segerink

    Traditional Transwell inserts with track‐etched 10 μm thick polymer membranes have been intensively used for studying cellular barriers. However, their thickness hampers direct cell‐cell interaction between the adjacent cells which has been shown to critically influence the barrier formation. Therefore, here the effect of reduced distance between the cells by using fivefold thinner (2 μm) optically transparent polydimethylsiloxane (PDMS) membranes is studied and compared with polycarbonate (PC) membranes. The authors validate their applicability as an alternative substrate for the study of the blood–brain barrier by performing a monoculture of brain endothelial cells (hCMEC/D3) and co‐culture with astrocytes in Transwells. The PDMS membranes supported the cellular protrusions through the well‐defined pores and allowed control over cellular transmigration by varying the pore size. Cellular localization of tight and adherens junction proteins ZO‐1, Claudin‐5, and VE‐cadherin is similar to PC membranes while their expression levels are affected as a function of membrane material and co‐culture with astrocytes. Additionally, a permeability assay indicated tighter barrier formation on the PDMS membrane. These results suggest the potential use of 2 μm PDMS membranes for in vitro modeling of biological barriers with improved co‐culture models and enhanced visibility of the cell culture.


  • Open Access

    Fabrication of freestanding Pt nanowires for use as thermal anemometry probes in turbulence measurements

    by Hai Le-The, Christian Küchler, Albert van Den Berg, Eberhard Bodenschatz, Detlef Lohse, Dominik Krug

    We report a robust fabrication method for patterning freestanding Pt nanowires for use as thermal anemometry probes for small-scale turbulence measurements. Using e-beam lithography, high aspect ratio Pt nanowires (~300 nm width, ~70 µm length, ~100 nm thickness) were patterned on the surface of oxidized silicon (Si) wafers. Combining wet etching processes with dry etching processes, these Pt nanowires were successfully released, rendering them freestanding between two silicon dioxide (SiO2) beams supported on Si cantilevers. Moreover, the unique design of the bridge holding the device allowed gentle release of the device without damaging the Pt nanowires. The total fabrication time was minimized by restricting the use of e-beam lithography to the patterning of the Pt nanowires, while standard photolithography was employed for other parts of the devices. We demonstrate that the fabricated sensors are suitable for turbulence measurements when operated in constant-current mode. A robust calibration between the output voltage and the fluid velocity was established over the velocity range from 0.5 to 5 m s−1in a SF6atmosphere at a pressure of 2 bar and a temperature of 21 °C. The sensing signal from the nanowires showed negligible drift over a period of several hours. Moreover, we confirmed that the nanowires can withstand high dynamic pressures by testing them in air at room temperature for velocities up to 55 m s−1.


  • Open Access

    Fabrication of free-standing Pt nanowires for use as thermal anemometry probes in turbulence measurements

    by Hai Le-The, Christian Küchler, Albert van Den Berg, Eberhard Bodenschatz, Detlef Lohse, Dominik Krug

    We report a robust fabrication method for patterning free-standing Pt nanowires for the use as thermal anemometry probes for small-scale turbulence measurements. Using e-beam lithography, high aspect ratio Pt nanowires (~300 nm width, ~70 $\mu$m length, ~100 nm thickness) were patterned on the surface of oxidized silicon (Si) wafers. Combining precise wet etching processes with dry etching processes, these Pt nanowires have been successfully released free-standing between two silicon dioxide (SiO2) beams supported on Si cantilevers. Moreover, the unique design of the bridge holding the device allowed to release the device gently without damaging the Pt nanowires. The total fabrication time was minimized by restricting the use of e-beam lithography to the patterning of the Pt nanowires while standard photolithography was employed for other parts of the devices. We demonstrate that the fabricated sensors are suitable for turbulence measurements when operated in a constant-current mode. A robust calibration between output voltage and fluid velocity was established over the velocity range from 0.5 m s-1 to 5 m s-1 in an SF6 atmosphere at a pressure of 2 bar and a temperature of 21{\deg}C. The sensing signal from the nanowires showed negligible drift over a period of several hours. Moreover, we confirmed that the nanowires are able to withstand high dynamic pressures by testing them in air at room temperature velocities up to 55 m/s.

  • Open Access

    Plasmonic Nanocrystal Arrays on Photonic Crystals with Tailored Optical Resonances

    by Juan Wang, Hai Le-The, Theodosios Karamanos, Radius N.S. Suryadharma, Albert van Den Berg, Pepijn W. H. Pinkse, Carsten Rockstuhl, Lingling Shui, Jan C.T. C. T. Eijkel, Loes I. Segerink

    Hierarchical plasmonic-photonic microspheres (PPMs) with high controllability in their structures and optical properties have been explored towards surface-enhanced Raman spectroscopy. The PPMs consist of gold nanocrystal (AuNC) arrays (3rd-tier) anchored on a hexagonal nanopattern (2nd-tier) assembled from silica nanoparticles (SiO2NPs). The PPMs sustain both photonic stop band (PSB) properties, resulting from periodic SiO2NP arrangements of the 2nd-tier, and a surface plasmon resonance (SPR), resulting from AuNC arrays of the 3rd-tier. Thanks to the synergistic effects of the photonic crystal (PC) structure and the AuNC array, the electromagnetic (EM) field in such a multiscale composite structure can tremendously be enhanced at certain wavelengths. These effects are demonstrated by experimentally evaluating the Raman enhancement of benzenethiol (BT) as probe molecule and are confirmed via numerical simulations. We achieve a maximum SERS enhancement factor of up to ~ 108 when the resonances are tailored to coincide with the excitation wavelength by suitable structural modifications.


  • Open Access

    Multiplexed blood–brain barrier organ-on-chip

    by Mariia Zakharova, Marciano Palma Do Carmo, Marinke van der Helm, Hai Le-The, M. N. S. de Graaf, Valeria V Orlova, Albert van Den Berg, Andries D. van der Meer, Kerensa Broersen, L. I. Segerink

    The developed multiplexed chip contains 8 channels that can be accessed individually or simultaneously with increased throughput. The visual inspection of cells in the device was improved with our fabricated 2 μm-thick porous PDMS membrane.


  • Open Access

    Wafer-scale 3D shaping of high aspect ratio structures by multistep plasma etching and corner lithography

    by Shu Ni, Erwin J. W. Berenschot, Pieter J. Westerik, Meint J. de Boer, René Wolf, Hai Le-The, Han J. G. E. Gardeniers, Niels R. Tas

    The current progress of system miniaturization relies extensively on the development of 3D machining techniques to increase the areal structure density. In this work, a wafer-scale out-of-plane 3D silicon (Si) shaping technology is reported, which combines a multistep plasma etching process with corner lithography. The multistep plasma etching procedure results in high aspect ratio structures with stacked semicircles etched deep into the sidewall and thereby introduces corners with a proper geometry for the subsequent corner lithography. Due to the geometrical contrast between the gaps and sidewall, residues are left only inside the gaps and form an inversion mask inside the semicircles. Using this mask, octahedra and donuts can be etched in a repeated manner into Si over the full wafer area, which demonstrates the potential of this technology for constructing high-density 3D structures with good dimensional control in the bulk of Si wafers.


  • Multilevel Spherical Photonic Crystals with Controllable Structures and Structure‐Enhanced Functionalities

    by Juan Wang, Hai Le‐The, Lingling Shui, Johan G. Bomer, Mingliang Jin, Guofu Zhou, Paul Mulvaney, Pepijn W. H. Pinkse, Albert van Den Berg, Loes I. Segerink, et al.

    Spherical photonic crystals (SPCs) with tailorable multiscale structure, versatile surface morphology, and controllable optical properties of both photonic stop band (PSB) and surface plasmon resonance (SPR), have been fabricated using a robust and facile method. The fabricated SPCs consist of well‐spaced gold nanocrystals (AuNCs) (3rd‐tier) anchored on silica nanopatterns (2nd‐tier) confined in microspherical templates (1st‐tier). Droplet microfluidics is used to produce microdroplets containing silica nanoparticles (SiO2NPs) which assemble to form two‐tier SPCs. Subsequently, three‐tier SPCs are obtained by thermal dewetting and evaporation of metal films deposited on the two‐tier SPCs, with the 3rd‐tier morphology being controlled by the deposited film morphology and programmed thermal annealing. Optical PSB and SPR properties of the prepared SPCs can be on‐demand tailored by the 2nd and 3rd‐tier morphology and their corresponding constituent materials. It is found that the scattering from AuNC arrays on the SPCs can be amplified by tailoring the PSB properties. The hierarchical SPCs manufactured by this method take advantages of low‐cost, high controllability, and further processability. The manufacturing of flexible film encapsulated well‐assembled SPCs as anticounterfeiting stamps, which are easy to be identified using the mobile phone with a flash, is demonstrated.


  • Enhanced Protein Crystallization on Nafion Membranes Modified by Low-Cost Surface Patterning Techniques

    by M. Polino, C. A. M. Portugal, H. Le The, R. Tiggelaar, J. Eijkel, J. G. Crespo, I. M. Coelhoso, M. P. Pina, R. Mallada


  • Open Access

    Plasmonic Bubble Nucleation in Binary Liquids

    by Marvin Detert, Binglin Zeng, Yuliang Wang, Hai Le The, Harold J. W. Zandvliet, Detlef Lohse

    Metal nanoparticles under laser irradiation can produce enormous heat due to surface plasmon resonance. When submerged in a liquid this can lead to the nucleation of plasmonic bubbles. In the very early stage, the nucleation of a giant vapor bubble was observed with an ultrahigh-speed camera. In this study, the formation of this giant bubble on gold nanoparticles (GNPs) in six binary liquid combinations has been investigated. We find that the time delay between the beginning of the laser heating and the bubble nucleation is determined by the absolute amount of dissolved gas in the liquid. Moreover, the bubble volume mainly depends on the vaporization energy of the liquid, consisting of the latent heat of vaporization and the energy needed to reach the boiling temperature. Our results contribute to controlling the initial giant bubble nucleation and have strong bearings on applications of such bubbles.


  • Open Access

    Plasmonic Bubble Nucleation and Growth in Water: Effect of Dissolved Air

    by Xiaolai Li, Yuliang Wang, Mikhail E. Zaytsev, Guillaume Lajoinie, Hai Le The, Johan G. Bomer, Jan C. T. Eijkel, Harold J. W. Zandvliet, Xuehua Zhang, Detlef Lohse

    Under continuous laser irradiation, noble metal nanoparticles immersed in water can quickly heat up, leading to the nucleation of so-called plasmonic bubbles. In this work we want to further understand the bubble nucleation and growth mechanism. In particular, we quantitatively study the effect of the amount of the dissolved air on the bubble nucleation and growth dynamics, both for the initial giant bubble, which forms shortly after switching on the laser and which is mainly composed of vapor, and for the final life phase of the bubble, during which it mainly contains air expelled from the water. We found that the bubble nucleation temperature depends on the gas concentration: the higher the gas concentration, the lower the bubble nucleation temperature. Also the long-term diffusion dominated bubble growth is governed by the gas concentration. The radius of the bubbles grows as R(t)∝t1/3 for air equilibrated and for air oversaturated water. In contrast, in partially degassed water, the growth is much slower, since even for the highest temperature we achieve, the water remains under-saturated.