Claire Jean-Mistral
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Claire Jean-Mistral has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- Alain Sylvestre
University Grenoble Alpes, CNRS, Grenoble INP, G2Elab, Grenoble 38000, France
15 shared publications - Thanh Vu-Cong
SuperGrid Institute, Villeurbanne, France
9 shared publications Clara Lagomarsini
5 shared publicationsJ-J Chaillout
3 shared publicationsS Basrour
3 shared publications- Shaoyi Zhou
College of Locomotive and Rolling Stock Engineering, Guangzhou Railway Polytechnic, Guangzhou 511300, China
3 shared publications
Latest Publications
- 19 November 2021
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 31 (1) , 015006
Experimental investigations of a new concept of wave energy converter hybridizing piezoelectric and dielectric elastomer generators
A novel concept of a surge wave energy converter for nearshore applications is investigated experimentally. The centimetre-sized prototype developed in this work represents a proof of concept of a submerged system, which entails a hybrid transduction solution for the electrical conversion of wave energy, that uses piezoelectric elements (PZEs) and dielectric elastomer generators (DEG). The idea is to exploit the horizontal pressure gradient and horizontal water velocity underneath the waves to compress the PZE and inflate each half wave period a soft variable capacitance, which composes the DEG. The electrical charges created by the PZE are used to polarize the DEG, which is able to multiply the input energy. This hybridization is conceived to allow the system to generate electrical energy from waves without conventional high voltage supplies, thus reducing production costs and allowing standalone clean electrical generation. The article provides the preliminary fluid-mechanical measurements performed in a wave flume with a first version of the prototype and supported by a model comprising the fluid/structure interaction, the materials response, and the electrical operations. An estimation of the output energy of a small-sized prototype in constant charge mode is computed, and perspectives for optimizing the system are presented.
- 19 November 2021
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 31 (1) , 015006
Experimental investigations of a new concept of wave energy converter hybridizing piezoelectric and dielectric elastomer generators
A novel concept of a surge wave energy converter for nearshore applications is investigated experimentally. The centimetre-sized prototype developed in this work represents a proof of concept of a submerged system, which entails a hybrid transduction solution for the electrical conversion of wave energy, that uses piezoelectric elements (PZEs) and dielectric elastomer generators (DEG). The idea is to exploit the horizontal pressure gradient and horizontal water velocity underneath the waves to compress the PZE and inflate each half wave period a soft variable capacitance, which composes the DEG. The electrical charges created by the PZE are used to polarize the DEG, which is able to multiply the input energy. This hybridization is conceived to allow the system to generate electrical energy from waves without conventional high voltage supplies, thus reducing production costs and allowing standalone clean electrical generation. The article provides the preliminary fluid-mechanical measurements performed in a wave flume with a first version of the prototype and supported by a model comprising the fluid/structure interaction, the materials response, and the electrical operations. An estimation of the output energy of a small-sized prototype in constant charge mode is computed, and perspectives for optimizing the system are presented.
- 29 August 2019
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 28 (10) , 104003
Optimization of an electret-based soft hybrid generator for human body applications
Hybridization of two electroactive materials could be the key to design soft innovative generators able to scavenge mechanical energy from human movement. Among all the technologies, soft electret generators based on charges recombination between two electrodes through an external resistive load, are promising soft hybrid generators with a theoretically scavenged energy density up to 1.42 mJ g −1 . In order to reach high level of scavenged energy, we present here an optimization of an electret-based hybrid structure regarding the mechanical architecture but also the material used and especially the electret involved. A smart optimized frame insures a perfect coupling between the silicone dielectric elastomer (Sylgard 186) and the electret polymer (Teflon) while maximizing the capacitance variation and minimizing the von Mises stresses. This hybrid structure is able to scavenge up to 49 μ W on an optimal load of 150 MΩ at 1 Hz and under an applied strain of 50%, with an electret charged up to −1000 V. Parylene C, VT-4 and AF-4 are also investigated as potential electret material underlying an increase of 35% in the output performances of the hybrid structure. The devices structure, operating principles and experimental performance will be presented and discussed, together with the possible improvements to enhance the performance of the devices.
- 29 August 2019
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 28 (10) , 104003
Optimization of an electret-based soft hybrid generator for human body applications
Hybridization of two electroactive materials could be the key to design soft innovative generators able to scavenge mechanical energy from human movement. Among all the technologies, soft electret generators based on charges recombination between two electrodes through an external resistive load, are promising soft hybrid generators with a theoretically scavenged energy density up to 1.42 mJ g −1 . In order to reach high level of scavenged energy, we present here an optimization of an electret-based hybrid structure regarding the mechanical architecture but also the material used and especially the electret involved. A smart optimized frame insures a perfect coupling between the silicone dielectric elastomer (Sylgard 186) and the electret polymer (Teflon) while maximizing the capacitance variation and minimizing the von Mises stresses. This hybrid structure is able to scavenge up to 49 μ W on an optimal load of 150 MΩ at 1 Hz and under an applied strain of 50%, with an electret charged up to −1000 V. Parylene C, VT-4 and AF-4 are also investigated as potential electret material underlying an increase of 35% in the output performances of the hybrid structure. The devices structure, operating principles and experimental performance will be presented and discussed, together with the possible improvements to enhance the performance of the devices.
- 1 July 2019
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 157-158, 528-541
Closed-form solutions to optimal parameters of dynamic vibration absorbers with negative stiffness under harmonic and transient excitation
- 1 July 2019
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 157-158, 528-541
Closed-form solutions to optimal parameters of dynamic vibration absorbers with negative stiffness under harmonic and transient excitation
- 19 June 2019
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 141 (5) , 1-32
Optimal Design of an Inerter-Based Dynamic Vibration Absorber Connected to Ground
This paper addresses the optimal design of a novel nontraditional inerter-based dynamic vibration absorber (NTIDVA) installed on an undamped primary system of single degree-of-freedom under harmonic and transient excitations. Our NTIDVA is based on the traditional dynamic vibration absorber (TDVA) with the damper replaced by a grounded inerter-based mechanical network. Closed-form expressions of optimal parameters of NTIDVA are derived according to an extended version of fixed point theory developed in the literature and the stability maximization criterion. The transient response of the primary system is optimized when the coupled system becomes defective, namely having three pairs of coalesced conjugate poles, the proof of which is also spelt out in this paper. Moreover, the analogous relationship between NTIDVA and electromagnetic dynamic vibration absorber is highlighted, facilitating the practical implementation of the proposed absorber. Finally, numerical studies suggest that compared with TDVA, NTIDVA can decrease the peak vibration amplitude of the primary system and enlarge the frequency bandwidth of vibration suppression when optimized by the extended fixed point technique, while the stability maximization criterion shows an improved transient response in terms of larger modal damping ratio and accelerated attenuation rate.
- 19 June 2019
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 141 (5) , 1-32
Optimal Design of an Inerter-Based Dynamic Vibration Absorber Connected to Ground
This paper addresses the optimal design of a novel nontraditional inerter-based dynamic vibration absorber (NTIDVA) installed on an undamped primary system of single degree-of-freedom under harmonic and transient excitations. Our NTIDVA is based on the traditional dynamic vibration absorber (TDVA) with the damper replaced by a grounded inerter-based mechanical network. Closed-form expressions of optimal parameters of NTIDVA are derived according to an extended version of fixed point theory developed in the literature and the stability maximization criterion. The transient response of the primary system is optimized when the coupled system becomes defective, namely having three pairs of coalesced conjugate poles, the proof of which is also spelt out in this paper. Moreover, the analogous relationship between NTIDVA and electromagnetic dynamic vibration absorber is highlighted, facilitating the practical implementation of the proposed absorber. Finally, numerical studies suggest that compared with TDVA, NTIDVA can decrease the peak vibration amplitude of the primary system and enlarge the frequency bandwidth of vibration suppression when optimized by the extended fixed point technique, while the stability maximization criterion shows an improved transient response in terms of larger modal damping ratio and accelerated attenuation rate.
- 1 April 2019
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 445, 188-203
Electromagnetic shunt damping with negative impedances: Optimization and analysis
- 1 April 2019
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 445, 188-203
Electromagnetic shunt damping with negative impedances: Optimization and analysis
- 1 February 2019
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 28 (3) , 035003
Hybrid piezoelectric–electrostatic generators for wearable energy harvesting applications
Dielectric elastomer generators (DEGs) are promising soft electrostatic converters. Despite their several advantages, these generators are not well developed in the literature due to the need of an external polarization voltage to perform the energetic cycle. In order to overcome this drawback and to design a scavenger with a longer lifetime, we propose to substitute the external polarization source in DEGs by coupling them with piezoelectric materials. The charge produced by the piezoelectric material due to external mechanical excitation are employed as polarization source of the DEG. Two different prototypes have been designed, simulated and realized: the first one employs piezoelectric ceramic as polarization element of an acrylic-based DEG and the second one employing a piezoelectric polymer. A smart frame insures a perfect mechanical and electrical synchronization leading to interesting level of scavenged energy density (up to 14.3 μ J.g −1 and 0.39 μ J.g −1 respectively). These solutions, compared to the ones proposed in the literature, present the advantages to be compact, do not need additional electronic element and can guarantee a polarization source to the device at each deformation cycle. The devices structure, working principles and experimental performance will be presented and discussed, together with the possible improvements to enhance the performance of the devices.
- 1 February 2019
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 28 (3) , 035003
Hybrid piezoelectric–electrostatic generators for wearable energy harvesting applications
Dielectric elastomer generators (DEGs) are promising soft electrostatic converters. Despite their several advantages, these generators are not well developed in the literature due to the need of an external polarization voltage to perform the energetic cycle. In order to overcome this drawback and to design a scavenger with a longer lifetime, we propose to substitute the external polarization source in DEGs by coupling them with piezoelectric materials. The charge produced by the piezoelectric material due to external mechanical excitation are employed as polarization source of the DEG. Two different prototypes have been designed, simulated and realized: the first one employs piezoelectric ceramic as polarization element of an acrylic-based DEG and the second one employing a piezoelectric polymer. A smart frame insures a perfect mechanical and electrical synchronization leading to interesting level of scavenged energy density (up to 14.3 μ J.g −1 and 0.39 μ J.g −1 respectively). These solutions, compared to the ones proposed in the literature, present the advantages to be compact, do not need additional electronic element and can guarantee a polarization source to the device at each deformation cycle. The devices structure, working principles and experimental performance will be presented and discussed, together with the possible improvements to enhance the performance of the devices.
- 1 August 2018
- Published by Elsevier in Composites Part B: Engineering
- Vol. 146, 13-19
Soft, hyper-elastic and highly-stable silicone-organo-clay dielectric elastomer for energy harvesting and actuation applications
- 1 August 2018
- Published by Elsevier in Composites Part B: Engineering
- Vol. 146, 13-19
Soft, hyper-elastic and highly-stable silicone-organo-clay dielectric elastomer for energy harvesting and actuation applications
- 10 July 2018
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 27 (8) , 085015
Influence of internal electrical losses on optimization of electromagnetic energy harvesting
A lot of effort has been made to optimize linear electromagnetic energy harvesters under harmonic or random excitation, connected to simple or more complicated electrical extraction circuits. Nevertheless, the internal electrical losses of electromagnetic coils are often neglected in these optimization analyses. To this end, the present paper investigates systematically and for the first time the influence of internal impedance of coils on energy harvesting performance under various types of ambient excitation sources, which are, respectively, external force acting directly on the seismic mass, base displacement-induced motion and disturbance generated by base acceleration. Our analysis highlights that under sinusoidal excitation, the resonant load outperforms its non-resonant counterpart in terms of energy harvesting performance when the internal resistance is very small, while its increase deteriorates significantly the broadband harvesting capability of resonant circuits. When subjected to random vibration, the resonant load presents no advantage compared to the latter one. The optimum design of non-resonant circuit is then carried out in each excitation scenario leading to well-known criteria and expanding to cases where no optimal conditions were defined or obtained. It is also reported that the neglect of internal losses underestimates the maximum available power.
- 10 July 2018
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 27 (8) , 085015
Influence of internal electrical losses on optimization of electromagnetic energy harvesting
A lot of effort has been made to optimize linear electromagnetic energy harvesters under harmonic or random excitation, connected to simple or more complicated electrical extraction circuits. Nevertheless, the internal electrical losses of electromagnetic coils are often neglected in these optimization analyses. To this end, the present paper investigates systematically and for the first time the influence of internal impedance of coils on energy harvesting performance under various types of ambient excitation sources, which are, respectively, external force acting directly on the seismic mass, base displacement-induced motion and disturbance generated by base acceleration. Our analysis highlights that under sinusoidal excitation, the resonant load outperforms its non-resonant counterpart in terms of energy harvesting performance when the internal resistance is very small, while its increase deteriorates significantly the broadband harvesting capability of resonant circuits. When subjected to random vibration, the resonant load presents no advantage compared to the latter one. The optimum design of non-resonant circuit is then carried out in each excitation scenario leading to well-known criteria and expanding to cases where no optimal conditions were defined or obtained. It is also reported that the neglect of internal losses underestimates the maximum available power.
- Open Access
- 5 June 2018
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 27 (7) , 070201
Progress in electromechanically active polymers: selected papers from EuroEAP 2017
- 5 June 2018
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 27 (7) , 070201
Open AccessProgress in electromechanically active polymers: selected papers from EuroEAP 2017
- 27 March 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10594, 105941Q
Autonomous electrostatic generator for energy harvesting applications under inertial load
Vibration-based energy harvesters have been extensively studied and investigated to harvest the energy produced by environmental mechanical vibration sources as mean to produce low electrical energy, thereby supplying low-power sensors and actuators. Different devices have been proposed as energy harvesters, cantilevers-based geometries have been pursued frequently in the literature. Here, we propose the geometry of an elastomeric circular membrane coupled with an electret (soft electrostatic generator) with a central proof mass. By soliciting the designed device around its resonance frequency of 14Hz with an acceleration of 0.4g for a mass of 9.5g, the system produced an average electric power of 24μW for an optimal resistance of 150MΩ. An analytical study developed closely with a finite element simulation with Comsol® allowed to validate the obtained experimental results, suggesting that this approach can be used as a tuning method to develop other geometrical shapes and conceive large-scale devices for vibration energy harvesting applications.
- 27 March 2018
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10594, 105941Q
Autonomous electrostatic generator for energy harvesting applications under inertial load
Vibration-based energy harvesters have been extensively studied and investigated to harvest the energy produced by environmental mechanical vibration sources as mean to produce low electrical energy, thereby supplying low-power sensors and actuators. Different devices have been proposed as energy harvesters, cantilevers-based geometries have been pursued frequently in the literature. Here, we propose the geometry of an elastomeric circular membrane coupled with an electret (soft electrostatic generator) with a central proof mass. By soliciting the designed device around its resonance frequency of 14Hz with an acceleration of 0.4g for a mass of 9.5g, the system produced an average electric power of 24μW for an optimal resistance of 150MΩ. An analytical study developed closely with a finite element simulation with Comsol® allowed to validate the obtained experimental results, suggesting that this approach can be used as a tuning method to develop other geometrical shapes and conceive large-scale devices for vibration energy harvesting applications.