MGMajid Gholhaki

Majid Gholhaki

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Majid Gholhaki has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Evaluation of SPSW systems equipped with viscous damper

    by Mohammad Jahan Ara, Majid Gholhaki, Vahid Pachideh

  • Open Access

    Probabilistic reliability cost of drift uniformity in optimized strongback steel frames

    by Ehsan Jahankhani, Omid Rezaifar, Majid Gholhaki, Peyman Homami

    The Strongback system effectively mitigates soft-story mechanisms by enforcing uniform inter-story drift. While deterministic optimization utilizing the Drift Uniformity Factor (DUF) achieves this target, it inherently neglects structural uncertainties. This study quantifies the “probabilistic cost” of the DUF constraint through a system reliability assessment of optimized 4- and 6-story Strongback steel frames across three topologies ( $$\alpha$$ = L/4,L/3,5L/12). Utilizing a Stochastic Finite Element Method framework, 12,000 simulations (1000 per scenario) were executed, incorporating four lognormal random variables for material and load uncertainties with a 10% coefficient of variation. The probabilistic results reveal a scale-dependent paradox. In 6-story frames, enforcing DUF systematically degraded system reliability; for the optimal $$\alpha =L/3$$ configuration, the probability of failure ( $${P}_{f}$$ ) surged by 208%, escalating from 14.7% (without DUF) to 45.3% (with DUF). Conversely, in shear-dominant 4-story frames ( $$\alpha =L/3$$ ), the DUF constraint acted as a “redemptive penalty” its deterministically imposed structural overstrength inadvertently enhanced stochastic robustness, reducing $${P}_{f}$$ from $$49.1$$ to 37.7% (a 23.2% reduction). Ultimately, this study demonstrates that imposing rigid kinematic constraints like DUF tightens the feasible design space, often critically compromising probabilistic safety margins. Geometric nonlinearities are approximated through P–Δ effects using leaning columns in OpenSees. These findings are specific to the adopted linear-static equivalent-load framework and should not be interpreted as general nonlinear dynamic seismic performance.

  • Open Access

    Structural Damage Detection in Reinforced Concrete Frames Using a Novel Objective Function and a Hybrid Manta–Secretary Algorithm: Five-Algorithm Comparison

    by Soheil Sabzevari, Hosein Naderpour, Majid Gholhaki

    Structural damage detection is vital for ensuring the safety, integrity, and serviceability of reinforced concrete (RC) structures, which are inherently susceptible to progressive deterioration over time. This study presents an advanced model updating framework enhanced with metaheuristic optimization algorithms for accurate and robust identification of structural damage. A novel objective function was formulated by integrating three critical dynamic features: natural frequencies, mode shapes, and modal strain energy. To validate the effectiveness and robustness of the proposed approach, five metaheuristic algorithms—GOA, WOA, MRFO, SBOA, and AOA—were employed and their performance evaluated across two predefined damage scenarios under three levels of simulated noise (0%, 3%, and 10%). Comparative results indicated that while MRFO and SBOA achieved higher accuracy and noise resistance, GOA demonstrated faster convergence rates. To overcome limitations observed in individual algorithms, a novel hybrid optimization algorithm, MSOA, was developed. MSOA effectively balanced exploration and exploitation tendencies, improved convergence behavior, and reduced the risk of premature convergence, particularly under noisy conditions. The error between simulated and estimated results, averaged over twenty runs for each damage scenario, was less than 4 percent. The results demonstrate that the proposed model updating framework, which integrates a novel objective function with the MSOA algorithm, provides high accuracy and robustness for structural damage detection in RC frames, even under conditions of measurement uncertainty.

  • Open Access

    Model updating method for detect and localize structural damage using generalized flexibility matrix and improved grey wolf optimizer algorithm (I-GWO)

    by Sina Sadraei, Majid Gholhaki, Omid Rezaifar

    Various civil engineering-based infrastructures have been strategically planned to implement the structural health monitoring (SHM) system, considering their significance. A key objective faced by this system is the automatic identification and damage detection at the appropriate moment. Employing optimization algorithms in structural model updating is one approach to achieve this objective. This study’s main goal is to evaluate the location and extent of damage by combining two dynamically evolving parameters: the structure’s frequency and the generalized flexibility matrix. It is determined that the suggested approach produces more accurate and effective outcomes than the previous modal flexibility techniques. This is achieved by applying various noises and extracting the damaged structure’s data using the Improved Grey Wolf Optimizer (I-GWO). The accuracy of this method in locating the 15-story shear frame, the 25-member two-dimensional truss bridge, and the 23-member two-dimensional frame, as well as in identifying all damages, is demonstrated by the fact that the error between the simulated and estimated results in an average of twenty runs and each damage scenario was less than 3 percent. The findings demonstrate that the technique can precisely pinpoint the position and extent of damage in various structures, hence increasing the effectiveness of damage identification. Furthermore, they show that when compared to grey wolf optimizer (GWO) and particle swarm optimizer (PSO), I-GWO can offer a dependable method for precisely detecting damage.


  • Open Access

    Efficient modal flexibility signal processing methodology for innovative identification of debonding zones in concrete-filled steel tubes

    by Borhan Mirzaei, Mohtasham Khanahmadi, Omid Rezaifar, Majid Gholhaki, Gholamreza Ghodrati Amiri


  • A mode shape sensitivity-based wavelet feature extraction method for interface debonding detection in concrete-filled steel tubes

    by Mohtasham Khanahmadi, Borhan Mirzaei, Gholamreza Ghodrati Amiri, Majid Gholhaki, Omid Rezaifar

    The use of concrete-filled steel tube (CFST) composite columns is increasingly prevalent in the construction industry, particularly in high-rise structures. A common issue in CFST columns is interface debonding between the concrete core and the steel tube. If this debonding progresses both superficially and deeply, it can lead to instability and buckling of the column, posing a serious threat to the overall structural integrity. This study presents an innovative and effective method for extracting damage-sensitive features using horizontal, vertical, and diagonal detail coefficients derived from the wavelet analysis of corrected modal signals. The study introduces the total normalized irregularity detection index (NIDIT) as a damage detection metric. The results indicate that NIDIT is highly effective in identifying and detecting debonding regions. NIDIT quantifies the accumulation of irregularities and disturbances in the affected areas, allowing for the detection of concrete surface debonding from the steel tube. The findings show that NIDIT can accurately and efficiently detect damage in middle and end-edge regions, addressing a significant challenge in structural health monitoring with high precision.


  • Cyclic behavior of the reinforced concrete shear walls with opening retrofitted with steel plate

    by Fatemeh Abdoos, Majid Gholhaki, Ali Kheyroddin

    The reinforced concrete (RC) shear walls are widely used as the lateral load‐resisting system due to their adequate ductility and great energy dissipation capacity. On the other hand, use of these walls can reduce the size of the beams and columns and also, decreases the lateral displacements. However, presence of the openings in the shear walls alters the behavior of the wall and therefore, the dimensions and position of the opening play a key role in the performance of this structural system. In this study, an RC shear wall with eccentric opening was verified using ABAQUS software. This model, which is called the reference model, a wall and a pier have been created according to aspect ratios given by ACI318‐14. This model was retrofitted with the steel plates arranged in various patterns and effect of each pattern on the system's performance was investigated and the best one was selected. The best steel plate arrangement increased the ultimate strength, maximum strength, cracking strength, and energy dissipation capacity by 127.3%, 13.42%, 22.53%, and 16.8%, respectively. To practically use this retrofit technique, three low, mid, and high‐rise buildings designed based on the old and new versions of the Iranian Code of Practice for Seismic Resistant Design of Buildings (Standard 2800) were upgraded with this technique and their performance was evaluated and performance of the substandard and standard buildings were compared with each other. The research results showed the ST52 steel plates do not considerably increase the maximum and cracking strength and could enhance the ultimate strength insignificantly. By retrofitting the edges of the openings by the diagonal steel plates and preventing spread of the cracks at the edges and corners, satisfactory results could be attained. Simultaneous use of the vertical and horizontal plates is an effective solution to increase the flexural and shear capacity of the structure.


  • Open Access

    Compressive strength ratios of concretes containing pozzolans under elevated temperatures

    by Ghasem Pachideh, Majid Gholhaki, Ahlam Aljenabi, Omid Rezaifar