Omid Rezaifar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Omid Rezaifar has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Majid Gholhaki
Faculty of Civil Engineering, Semnan University, Semnan, Iran
8 shared publications - Ali Kheyroddin
Faculty of Civil Engineering, Semnan University, Semnan, Iran
6 shared publications Majid Gholhaki
Faculty of Civil Engineering, Semnan University, Semnan, Iran
4 shared publicationsBehzad Eftekhar
Assistant Professor, Department of Civil Engineering, Islamic Azad University Branch Larestan, Larestan, Iran
2 shared publications- Borhan Mirzaei
School of Civil Engineering, Iran University of Science and Technology, Tehran, Iran
2 shared publications - Gholamreza Ghodrati Amiri
Iran University of Science and Technology
2 shared publications
Latest Publications
- Open Access
- 20 October 2026
- Published by Springer Nature in Scientific Reports
Experimental and numerical study of RC beam joints to steel-encased RC columns with a transitional part
The use of composite columns has attracted considerable attention due to their enhanced load-carrying capacity and ductility. However, the comparative behavior of reinforced concrete (RC) beam and RC column connections and, RC beam and steel encased in reinforced concrete columns (SRCC) incorporating a transitional part, aimed at improving load capacity, ductility, relocating the plastic hinge formation zone, and preventing shear failure of the RC beam under combined axial and cyclic loading, has not been comprehensively investigated. In this study, five specimens were tested, including RC beam RC column connections and RC beam and steel encased in reinforced concrete columns (SRCC) joints with a transition part employing different longitudinal reinforcement anchorage details. The specimens were subjected to quasi static cyclic loading under a constant axial load ratio of 0.08 of the column compressive capacity. Furthermore, a nonlinear finite element model was developed and validated against the experimental results. The experimental results demonstrated that the use of steel encased in reinforced concrete column enhanced the ultimate load-carrying capacity by an average of 35% compared to the conventional reinforced concrete beam to column specimen. In addition, a significant improvement in ductility and crack propagation control was observed. The incorporation of a transition part in the joint region not only increased the load capacity but also effectively relocated the plastic hinge formation from the joint core to the beam span, thereby reducing the likelihood of shear failure in the reinforced concrete beam. The numerical results showed good agreement with the experimental data, with the prediction error of the ultimate capacity remaining below 10% for all specimens. Based on the findings of this study, the application of steel-encased reinforced concrete columns combined with a transitional part and different anchorage details of beam longitudinal reinforcement can be considered an effective strategy for enhancing the seismic performance of beam–column connections. Furthermore, the proposed nonlinear finite element model provides a reliable tool for further analytical investigations and parametric studies.
- 20 October 2026
- Published by Springer Nature in Scientific Reports
Open AccessExperimental and numerical study of RC beam joints to steel-encased RC columns with a transitional part
The use of composite columns has attracted considerable attention due to their enhanced load-carrying capacity and ductility. However, the comparative behavior of reinforced concrete (RC) beam and RC column connections and, RC beam and steel encased in reinforced concrete columns (SRCC) incorporating a transitional part, aimed at improving load capacity, ductility, relocating the plastic hinge formation zone, and preventing shear failure of the RC beam under combined axial and cyclic loading, has not been comprehensively investigated. In this study, five specimens were tested, including RC beam RC column connections and RC beam and steel encased in reinforced concrete columns (SRCC) joints with a transition part employing different longitudinal reinforcement anchorage details. The specimens were subjected to quasi static cyclic loading under a constant axial load ratio of 0.08 of the column compressive capacity. Furthermore, a nonlinear finite element model was developed and validated against the experimental results. The experimental results demonstrated that the use of steel encased in reinforced concrete column enhanced the ultimate load-carrying capacity by an average of 35% compared to the conventional reinforced concrete beam to column specimen. In addition, a significant improvement in ductility and crack propagation control was observed. The incorporation of a transition part in the joint region not only increased the load capacity but also effectively relocated the plastic hinge formation from the joint core to the beam span, thereby reducing the likelihood of shear failure in the reinforced concrete beam. The numerical results showed good agreement with the experimental data, with the prediction error of the ultimate capacity remaining below 10% for all specimens. Based on the findings of this study, the application of steel-encased reinforced concrete columns combined with a transitional part and different anchorage details of beam longitudinal reinforcement can be considered an effective strategy for enhancing the seismic performance of beam–column connections. Furthermore, the proposed nonlinear finite element model provides a reliable tool for further analytical investigations and parametric studies.
- Open Access
- 24 September 2026
- Published by Springer Nature in Scientific Reports
Probabilistic reliability cost of drift uniformity in optimized strongback steel frames
The Strongback system effectively mitigates soft-story mechanisms by enforcing uniform inter-story drift. While deterministic optimization utilizing the Drift Uniformity Factor (DUF) achieves this target, it inherently neglects structural uncertainties. This study quantifies the “probabilistic cost” of the DUF constraint through a system reliability assessment of optimized 4- and 6-story Strongback steel frames across three topologies ( $$\alpha$$ = L/4,L/3,5L/12). Utilizing a Stochastic Finite Element Method framework, 12,000 simulations (1000 per scenario) were executed, incorporating four lognormal random variables for material and load uncertainties with a 10% coefficient of variation. The probabilistic results reveal a scale-dependent paradox. In 6-story frames, enforcing DUF systematically degraded system reliability; for the optimal $$\alpha =L/3$$ configuration, the probability of failure ( $${P}_{f}$$ ) surged by 208%, escalating from 14.7% (without DUF) to 45.3% (with DUF). Conversely, in shear-dominant 4-story frames ( $$\alpha =L/3$$ ), the DUF constraint acted as a “redemptive penalty” its deterministically imposed structural overstrength inadvertently enhanced stochastic robustness, reducing $${P}_{f}$$ from $$49.1$$ to 37.7% (a 23.2% reduction). Ultimately, this study demonstrates that imposing rigid kinematic constraints like DUF tightens the feasible design space, often critically compromising probabilistic safety margins. Geometric nonlinearities are approximated through P–Δ effects using leaning columns in OpenSees. These findings are specific to the adopted linear-static equivalent-load framework and should not be interpreted as general nonlinear dynamic seismic performance.- 24 September 2026
- Published by Springer Nature in Scientific Reports
Open AccessProbabilistic reliability cost of drift uniformity in optimized strongback steel frames
The Strongback system effectively mitigates soft-story mechanisms by enforcing uniform inter-story drift. While deterministic optimization utilizing the Drift Uniformity Factor (DUF) achieves this target, it inherently neglects structural uncertainties. This study quantifies the “probabilistic cost” of the DUF constraint through a system reliability assessment of optimized 4- and 6-story Strongback steel frames across three topologies ( $$\alpha$$ = L/4,L/3,5L/12). Utilizing a Stochastic Finite Element Method framework, 12,000 simulations (1000 per scenario) were executed, incorporating four lognormal random variables for material and load uncertainties with a 10% coefficient of variation. The probabilistic results reveal a scale-dependent paradox. In 6-story frames, enforcing DUF systematically degraded system reliability; for the optimal $$\alpha =L/3$$ configuration, the probability of failure ( $${P}_{f}$$ ) surged by 208%, escalating from 14.7% (without DUF) to 45.3% (with DUF). Conversely, in shear-dominant 4-story frames ( $$\alpha =L/3$$ ), the DUF constraint acted as a “redemptive penalty” its deterministically imposed structural overstrength inadvertently enhanced stochastic robustness, reducing $${P}_{f}$$ from $$49.1$$ to 37.7% (a 23.2% reduction). Ultimately, this study demonstrates that imposing rigid kinematic constraints like DUF tightens the feasible design space, often critically compromising probabilistic safety margins. Geometric nonlinearities are approximated through P–Δ effects using leaning columns in OpenSees. These findings are specific to the adopted linear-static equivalent-load framework and should not be interpreted as general nonlinear dynamic seismic performance. - Open Access
- 9 July 2026
- Published by Springer Nature
- p. 596-608
Investigation of Longitudinal Reinforcement Anchorage in Reinforced Concrete Beams Using Mechanical Splice (Coupler) in the Joint with a Steel Section Encased in Reinforced Concrete Column (SRC Composite Column)
In recent decades, the use of composite steel–concrete columns has increased in tall structures due to their numerous advantages. The choice of construction materials significantly influences the properties of each structure, making it one of the most critical factors. Composite columns, due to the presence of a steel section encased in reinforced concrete (SRC), exhibit increased confinement, flexural resistance, ductility, stiffness, and energy absorption compared to reinforced concrete columns. This study investigates the effects of incorporating a steel transitional part (TP) in the reinforced concrete beam (RCB) and a steel section encased in the reinforced concrete column (SRCC) on the performance of specimens. In this study, three experimental specimens were examined. The SRCC-RCB-TP-Coupler specimen demonstrated notable improvements in mechanical properties, including an 18% and 9% increase in load-bearing capacity compared to RCC-RCB and SRCC-RCB specimens, respectively. Stiffness also increased significantly, by 33.5% compared to SRCC-RCB and by over 100% compared to RCC-RCB. Additionally, the use of the transitional part improved ductility, with a 16% increase compared to RCC-RCB and an 8% increase compared to SRCC-RCB specimens. The SRCC-RCB specimen also exhibited an 8% increase in ductility compared to RCC-RCB. These results indicate that encasing an I-shaped steel section in the reinforced concrete column and utilizing a steel transitional part in the beam–column joint enhances load-bearing capacity, stiffness, and ductility. This configuration improves force distribution and extends the plastic hinge length in the beam, enhancing the specimen's performance under load.
- 9 July 2026
- Published by Springer Nature
- p. 596-608
Open AccessInvestigation of Longitudinal Reinforcement Anchorage in Reinforced Concrete Beams Using Mechanical Splice (Coupler) in the Joint with a Steel Section Encased in Reinforced Concrete Column (SRC Composite Column)
In recent decades, the use of composite steel–concrete columns has increased in tall structures due to their numerous advantages. The choice of construction materials significantly influences the properties of each structure, making it one of the most critical factors. Composite columns, due to the presence of a steel section encased in reinforced concrete (SRC), exhibit increased confinement, flexural resistance, ductility, stiffness, and energy absorption compared to reinforced concrete columns. This study investigates the effects of incorporating a steel transitional part (TP) in the reinforced concrete beam (RCB) and a steel section encased in the reinforced concrete column (SRCC) on the performance of specimens. In this study, three experimental specimens were examined. The SRCC-RCB-TP-Coupler specimen demonstrated notable improvements in mechanical properties, including an 18% and 9% increase in load-bearing capacity compared to RCC-RCB and SRCC-RCB specimens, respectively. Stiffness also increased significantly, by 33.5% compared to SRCC-RCB and by over 100% compared to RCC-RCB. Additionally, the use of the transitional part improved ductility, with a 16% increase compared to RCC-RCB and an 8% increase compared to SRCC-RCB specimens. The SRCC-RCB specimen also exhibited an 8% increase in ductility compared to RCC-RCB. These results indicate that encasing an I-shaped steel section in the reinforced concrete column and utilizing a steel transitional part in the beam–column joint enhances load-bearing capacity, stiffness, and ductility. This configuration improves force distribution and extends the plastic hinge length in the beam, enhancing the specimen's performance under load.
- Open Access
- 9 July 2026
- Published by Springer Nature
- p. 583-595
Laboratory Evaluation of the Shape Effect of Reinforced Concrete Columns on Axial Performance Under Electromagnetic Field
This study examines the influence of geometric shape and electromagnetic field (EMF) conditions on the axial performance of reinforced concrete columns. Two types of specimens, with dimensions of 75 × 15 × 15 cm (cuboidal) and 15 × 75 cm (cylindrical), were experimentally evaluated under three levels of magnetic field intensity (0, 0.35, and 0.7 T) and three levels of electric current (0, 24, and 36 A). The experiments were designed to quantitatively assess changes in axial strength as a function of geometric shape and electromagnetic parameters. The results revealed that applying a magnetic field up to 0.35 T improved the axial strength of both specimen types. However, a significant reduction in axial strength was observed at higher magnetic field intensities (0.7 T). This reduction was more pronounced in cuboidal specimens due to non-uniform stress distribution and strain concentration at the corners. On the other hand, applying electric current at all levels consistently reduced the axial strength, particularly in cuboidal specimens, which exhibited more unstable behavior under the influence of the electric field. The analysis of geometric shape effects showed that cylindrical specimens demonstrated better resistance to magnetic and electric fields due to their more uniform stress distribution and the absence of sharp corners. In contrast, cuboidal specimens exhibited greater performance degradation due to stress concentration and corner vulnerability.
- 9 July 2026
- Published by Springer Nature
- p. 583-595
Open AccessLaboratory Evaluation of the Shape Effect of Reinforced Concrete Columns on Axial Performance Under Electromagnetic Field
This study examines the influence of geometric shape and electromagnetic field (EMF) conditions on the axial performance of reinforced concrete columns. Two types of specimens, with dimensions of 75 × 15 × 15 cm (cuboidal) and 15 × 75 cm (cylindrical), were experimentally evaluated under three levels of magnetic field intensity (0, 0.35, and 0.7 T) and three levels of electric current (0, 24, and 36 A). The experiments were designed to quantitatively assess changes in axial strength as a function of geometric shape and electromagnetic parameters. The results revealed that applying a magnetic field up to 0.35 T improved the axial strength of both specimen types. However, a significant reduction in axial strength was observed at higher magnetic field intensities (0.7 T). This reduction was more pronounced in cuboidal specimens due to non-uniform stress distribution and strain concentration at the corners. On the other hand, applying electric current at all levels consistently reduced the axial strength, particularly in cuboidal specimens, which exhibited more unstable behavior under the influence of the electric field. The analysis of geometric shape effects showed that cylindrical specimens demonstrated better resistance to magnetic and electric fields due to their more uniform stress distribution and the absence of sharp corners. In contrast, cuboidal specimens exhibited greater performance degradation due to stress concentration and corner vulnerability.
- Open Access
- 22 December 2025
- Published by Tulpar Academic Publishing in Challenge Journal of Concrete Research Letters
- Vol. 16 (4) , 173-202
Predicting compressive strength of heavyweight concrete using deep neural networks and Box–Behnken design
This study investigates the prediction and evaluation of compressive strength in heavyweight concrete incorporating magnetite and steel slag, using two advanced modeling techniques: Deep Artificial Neural Networks (DANN) and Box-Behnken Response Surface Methodology (BBRSM). A total of 324 concrete specimens were prepared based on 36 unique mix designs. Non-destructive testing methods ultrasonic pulse velocity (UPV) and Schmidt rebound hammer (SRH) were employed to characterize material properties. The 28-day compressive strength of each sample was determined following ASTM C39 standards. Data from UPV and SRH tests, along with mix parameters such as the water-cement ratio, were used as inputs for both models. The DANN model, developed using a hybrid architecture combining Convolutional Neural Network (CNN) and Long Short-Term Memory (LSTM), achieved superior predictive performance, with a coefficient of determination (R²) of 0.9951 and a root mean square error (RMSE) of 0.0314 MPa. This corresponds to a coefficient of variation of just 0.045%, with a standard deviation error of 0.02% relative to the mean compressive strength of approximately 70 MPa. In contrast, the BBRSM model, employing a sixth-degree polynomial equation, yielded an R² of 0.9628 and a standard deviation of residuals of 1.36 MPa (about 1.94% of the average strength). The findings highlight the enhanced accuracy and efficiency of the Hybrid DANN model over the BBRSM approach. While both techniques offer practical, cost-effective alternatives to experimental testing, the DANN model is particularly well-suited for capturing complex nonlinear behaviors, whereas BBRSM remains valuable for optimization-oriented analysis.
- 22 December 2025
- Published by Tulpar Academic Publishing in Challenge Journal of Concrete Research Letters
- Vol. 16 (4) , 173-202
Open AccessPredicting compressive strength of heavyweight concrete using deep neural networks and Box–Behnken design
This study investigates the prediction and evaluation of compressive strength in heavyweight concrete incorporating magnetite and steel slag, using two advanced modeling techniques: Deep Artificial Neural Networks (DANN) and Box-Behnken Response Surface Methodology (BBRSM). A total of 324 concrete specimens were prepared based on 36 unique mix designs. Non-destructive testing methods ultrasonic pulse velocity (UPV) and Schmidt rebound hammer (SRH) were employed to characterize material properties. The 28-day compressive strength of each sample was determined following ASTM C39 standards. Data from UPV and SRH tests, along with mix parameters such as the water-cement ratio, were used as inputs for both models. The DANN model, developed using a hybrid architecture combining Convolutional Neural Network (CNN) and Long Short-Term Memory (LSTM), achieved superior predictive performance, with a coefficient of determination (R²) of 0.9951 and a root mean square error (RMSE) of 0.0314 MPa. This corresponds to a coefficient of variation of just 0.045%, with a standard deviation error of 0.02% relative to the mean compressive strength of approximately 70 MPa. In contrast, the BBRSM model, employing a sixth-degree polynomial equation, yielded an R² of 0.9628 and a standard deviation of residuals of 1.36 MPa (about 1.94% of the average strength). The findings highlight the enhanced accuracy and efficiency of the Hybrid DANN model over the BBRSM approach. While both techniques offer practical, cost-effective alternatives to experimental testing, the DANN model is particularly well-suited for capturing complex nonlinear behaviors, whereas BBRSM remains valuable for optimization-oriented analysis.
- Open Access
- 22 March 2025
- Published by Elsevier in Results in Engineering
- Vol. 26
Efficient modal flexibility signal processing methodology for innovative identification of debonding zones in concrete-filled steel tubes
- 22 March 2025
- Published by Elsevier in Results in Engineering
- Vol. 26
Open AccessEfficient modal flexibility signal processing methodology for innovative identification of debonding zones in concrete-filled steel tubes
- Open Access
- 1 December 2024
- Published by Apex Publishing in Numerical Methods in Civil Engineering
- Vol. 9 (2) , 71-85
A Novel Hybrid Meta-Heuristic Algorithm for Optimum Performance-Based Seismic Designs (PBSDs) of Steel Shear Walls (SSWs)
Steel Shear Walls (SSWs) exhibit suitable stiffness among various lateral force-resisting systems, and their application has been extended to tall buildings. In this research, the optimization of a High Performance-Based Seismic Design (HPBSD) of SSWs was introduced using a new optimization method. A hybrid algorithm was developed based on the Harmony Search (HS) algorithm, Multi-Design Variable Configuration (Multi-DVC) cascade optimization, and Upper-Bound Strategy (UBS). This new approach, termed MDVC-UHS, utilized cascade structural sizing optimization to manage numerous variables through a series of DVCs. The UBS was employed to reduce computational time, while the HS was used for global optimization. The MDVC-UHS algorithm was applied to optimize the dimensions of the steel shear wall in accordance with high performance-based seismic design principles. The research indicated that as the length of the SSW increased relative to its height, the more it was in the shear mode and the more usage it could have.
- 1 December 2024
- Published by Apex Publishing in Numerical Methods in Civil Engineering
- Vol. 9 (2) , 71-85
Open AccessA Novel Hybrid Meta-Heuristic Algorithm for Optimum Performance-Based Seismic Designs (PBSDs) of Steel Shear Walls (SSWs)
Steel Shear Walls (SSWs) exhibit suitable stiffness among various lateral force-resisting systems, and their application has been extended to tall buildings. In this research, the optimization of a High Performance-Based Seismic Design (HPBSD) of SSWs was introduced using a new optimization method. A hybrid algorithm was developed based on the Harmony Search (HS) algorithm, Multi-Design Variable Configuration (Multi-DVC) cascade optimization, and Upper-Bound Strategy (UBS). This new approach, termed MDVC-UHS, utilized cascade structural sizing optimization to manage numerous variables through a series of DVCs. The UBS was employed to reduce computational time, while the HS was used for global optimization. The MDVC-UHS algorithm was applied to optimize the dimensions of the steel shear wall in accordance with high performance-based seismic design principles. The research indicated that as the length of the SSW increased relative to its height, the more it was in the shear mode and the more usage it could have.
- 13 November 2024
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (1) , 016137
A mode shape sensitivity-based wavelet feature extraction method for interface debonding detection in concrete-filled steel tubes
The use of concrete-filled steel tube (CFST) composite columns is increasingly prevalent in the construction industry, particularly in high-rise structures. A common issue in CFST columns is interface debonding between the concrete core and the steel tube. If this debonding progresses both superficially and deeply, it can lead to instability and buckling of the column, posing a serious threat to the overall structural integrity. This study presents an innovative and effective method for extracting damage-sensitive features using horizontal, vertical, and diagonal detail coefficients derived from the wavelet analysis of corrected modal signals. The study introduces the total normalized irregularity detection index (NIDIT) as a damage detection metric. The results indicate that NIDIT is highly effective in identifying and detecting debonding regions. NIDIT quantifies the accumulation of irregularities and disturbances in the affected areas, allowing for the detection of concrete surface debonding from the steel tube. The findings show that NIDIT can accurately and efficiently detect damage in middle and end-edge regions, addressing a significant challenge in structural health monitoring with high precision.
- 13 November 2024
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (1) , 016137
A mode shape sensitivity-based wavelet feature extraction method for interface debonding detection in concrete-filled steel tubes
The use of concrete-filled steel tube (CFST) composite columns is increasingly prevalent in the construction industry, particularly in high-rise structures. A common issue in CFST columns is interface debonding between the concrete core and the steel tube. If this debonding progresses both superficially and deeply, it can lead to instability and buckling of the column, posing a serious threat to the overall structural integrity. This study presents an innovative and effective method for extracting damage-sensitive features using horizontal, vertical, and diagonal detail coefficients derived from the wavelet analysis of corrected modal signals. The study introduces the total normalized irregularity detection index (NIDIT) as a damage detection metric. The results indicate that NIDIT is highly effective in identifying and detecting debonding regions. NIDIT quantifies the accumulation of irregularities and disturbances in the affected areas, allowing for the detection of concrete surface debonding from the steel tube. The findings show that NIDIT can accurately and efficiently detect damage in middle and end-edge regions, addressing a significant challenge in structural health monitoring with high precision.
- Open Access
Compressive strength ratios of concretes containing pozzolans under elevated temperatures
- 29 July 2023
- Published by Elsevier in Engineering Structures
- Vol. 293
Dynamic parameters identification of 3D sandwich wall panels from phase-based video measurement via smartphones camera
- 29 July 2023
- Published by Elsevier in Engineering Structures
- Vol. 293
Dynamic parameters identification of 3D sandwich wall panels from phase-based video measurement via smartphones camera