YFYanyan Feng

Yanyan Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yanyan Feng has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Boosting Low-Temperature CO2 Methanation Performance over Ce-Doped Co-precipitation-Derived Ni-Based Catalysts

    by Xinglian Yu, Tiantian Cui, Di Yang, Yanyan Feng, Wen Yang

    CO2 methanation offers a promising approach to addressing both the greenhouse effect and the shortage of natural gas resources, making the development of efficient and stable catalysts highly imperative. Ni-based catalysts have attracted significant interest due to their low cost, high CO2 conversion, and excellent CH4 selectivity. In view of this, a series of NiMg-cop catalysts with varying Ni/Mg molar ratios and Ce loadings were synthesized by co-precipitation, and the effects of preparation methods and Ce doping on CO2 methanation performance were investigated. The results indicated that the catalyst 0.75NiMg-cop exhibited the excellent catalytic performance, holding 85.6% CO2 conversion and 100% CH4 selectivity at 300°C. Further enhancement was achieved by incorporating Ce, yielding the catalyst 0.03NiCeMg-cop, which reached 87.8% CO2 conversion while maintaining complete CH4 selectivity. Moreover, it demonstrated an outstanding stability during a 48 h time-on-stream test at 300°C, indicating superior resistance to sintering. Characterizations revealed that the co-precipitation method contributed to the formation of highly active Ni sites and small crystallite sizes. Furthermore, the addition of Ce facilitated the dispersion and reduction of the Ni species while effectively lowering the activation energy of the reaction. These findings highlighted the potential of the Ce-promoted co-precipitated Ni-based catalyst as a high-performance and durable candidate for industrial CO2 methanation applications.

  • Synthesis of Carbon-Modified Rod-Like Nickel–Cobalt Phosphides with Enhanced Energy-storage Performance for Supercapacitors

    by Wen Yang, Zhi Zhang, Xia Zhang, Yanyan Feng

    The use of metal-organic frameworks (MOFs) as precursors has garnered growing recognition due to their appeal in synthesizing carbon/transition-metal phosphide composites. Here, we report the synthesis of carbon-modified rod-like nickel–cobalt phosphide (NiCoP-N) and nickel–cobalt phosphide (NiCoP-A) through a low-temperature in situ phosphorization process using NiCo-MOF-74 as the precursor, with the annealing atmosphere serving as the key variable. The characterization revealed that compared with NiCoP-A, NiCoP-N possesses a boosted specific surface area, improved dispersion and enhanced charge transport capability. Benefiting from these advantages, NiCoP-N delivers excellent rate performance and capacity retention. Remarkably, the optimized Ni 2 Co 1 P-N electrode achieves a gravimetric capacitance of 898[ ]F[ ]g[ ] at 1[ ]A[ ]g[ ], with 78.4% of this value maintained under 20[ ]A[ ]g[ ], significantly outperforming NiCoP-A, which retains only 41.5%. With 2000 cycles, Ni 2 Co 1 P-N maintains a mass-specific capacitance of 524.8[ ]F[ ]g[ ], while Ni 2 Co 1 P-A decreases to 230.4[ ]F[ ]g[ ]. Additionally, an asymmetric supercapacitor assembled from Ni 2 Co 1 P-N and activated carbon can offer an energy density of 27.2[ ]Wh[ ]kg[ ] under 750[ ]W[ ]kg[ ], and hold 100% of its initial specific capacitance following 5000 cycles at 20[ ]A[ ]g[ ], confirming its excellent long-term durability.

  • Effect of Mn-Doped MgO Support on the Catalytic Performance of Ni-Based Catalysts in CO2 Methanation

    by Ziyi Huang, Quanbei Li, Tiancheng Huang, Yanyan Feng, Wen Yang

    Methanation of CO2 is a promising strategy for converting CO2 into valuable fuels or products, and the current critical challenge lies in the scientific design of non-precious metal catalysts capable of achieving high activity at low reaction temperatures. Hence, the Mn-doped MgO support was synthesized through the co-precipitation method, followed by the preparation of the Ni/Mn–MgO catalysts via the impregnation method for use in CO2 methanation, in order to investigate the effect of Mn doping on the morphology, structure and catalytic performance of the resultant catalysts. The results demonstrated that an appropriate amount of Mn doping could improve the dispersion of active metal Ni in the support, weaken the interaction between Ni and the support, increase the specific surface area of the catalyst, advance the generation of surface defect oxygen species, and consequently enhance the number of weak and moderate alkaline sites. Obviously, the catalyst Ni/Mn–MgO-0.10 exhibited the excellent catalytic performance with CO2 conversion of 70% and CH4 yield of 66% under 350°C, and still maintained the stable catalytic activity after 60 h of stability testing.


  • CO2 Methanation over Mn-Promoted Co-Precipitated Ni-Based Catalysts with Enhanced Catalytic Activity

    by Ziyi Huang, Huanxi Chen, Genglong Luo, Yanyan Feng, Wen Yang

    The methanation of CO2 is a sustainable pathway for converting CO2 into useful fuel products and chemicals. Due to the poor activity of Ni monometallic catalyst, the development of efficient low-temperature catalysts is an indispensable matter of research. Herein, Mn-promoted Ni/MgO catalysts were synthesized by co-precipitation method and applied for CO2 methanation, in order to investigate the effect of Mn doping on the catalytic performance of the resultant catalysts. Various characterization methods, including XRD, H2-TPR, BET, SEM, ICP-AES, and TEM, were employed to analyze the morphology and structure of the catalysts. The results of XRD and TEM confirmed that the introduction of Mn was helpful to promote the dispersion of Ni species and reduce the crystallite size of active Ni components. H2-TPR results indicated that an appropriate amount of Mn doping could weaken the interaction between Ni species and the support, thus facilitating the reduction of Ni species. Besides, BET analysis showed that the addition of Mn improved the pore structure of the catalyst, such as the specific surface area and pore volume. These characterizations suggested that the synergetic effects between Ni and Mn species, including good Ni dispersion, improved number of CO2 adsorption sites and suitable pore structure, were considered as significant factors for enhanced catalytic performance of the Mn-promoted catalysts. Accordingly, Ni–0.01Mn/MgO with Mn/Mg molar ratio of 0.01 exhibited the highest catalytic activity as compared to Ni/MgO, with CO2 conversion of 73.2% and CH4 selectivity of 99.4% at 300°C, and CO2 conversion of 81.8% and CH4 selectivity of 99.2% at 350°C, respectively. After 60 h of stability test at 300°C, Ni–0.01Mn/MgO still maintained the catalytic activity. This would offer an important opportunity to achieve an efficient co-precipitated CO2 methanation catalyst, which could be a good way to reduce CO2 emissions.


  • Hybrids of Highly Ordered Polyaniline/Carbon Fibers for High-Performance Supercapacitor Electrodes

    by Wen Yang, Dongmei Zhai, Hongbin Huang, Yanyan Feng

    Ordered polyaniline/carbon fibers (PANI/CFs) hybrids were fabricated via a facile in-situ polymerization method, and applied as electrode materials for supercapacitors. The morphology and structure of the as-prepared samples were conducted using SEM, XRD, FT-IR, and TGA techniques, respectively, and characterization results proved the successful growth of PANI on the CFs with network structure. The electrochemical performance tests demonstrated that the specific capacitance of PANI/CFs was 653.8 F/g at 1 A/g, and after 2000 cycles, the specific capacitance retained 91.7% at 20 A/g in 1.0 M H2SO4 electrolyte. In comparison to PANI, the excellent electrochemical performance of PANI/CFs was attributed to high dispersion of active sites, good electrical conductivity and enhanced accessibility between electrolyte and the active materials on the electrode. Thus, the improved electrochemical properties of PANI/CFs hybrids suggest good potential to be a greatly promising electrode material for use in supercapacitors.


  • In-situ growth of Co-Ni hydroxide nanosheets on 3D carbon fiber network with enhanced capacitive performance

    by Wen Yang, Qianyao Ding, Zhenfei Lan, Yanyan Feng, Yanjie Li

    The Co-Ni LDH/carbon fiber was prepared through a simple hydrothermal method using the cotton as the carbon source, and investigated as electrode materials for use in supercapacitors. The morphology and structure of the resulting samples were analyzed by SEM, and XRD techniques, respectively, and characterization results proved Ni-Co hydroxide nanosheets were orderly grown on the carbon fiber surface with 3D network structure. In comparison to Co-Ni hydroxides grown on the nickel foam substrate, the Co-Ni LDH/carbon fiber electrode displayed the superior specific capacitance of 1600 F/g at 0.5 A/g and excellent cycling stability of 87.9% retention at 10 A/g after 2000 cycles in 2.0 M KOH electrolyte. AC impedance results illustrated that the electron transfer resistance of Co-Ni LDH/carbon fiber electrode was significantly lower than that of the Co-Ni LDH/Ni foam electrode, illustrating that the carbon fiber can effectively promote the dispersion of Co-Ni LDH, decrease the electron transfer resistance of the as-prepared electrode materials, and ultimately improve the energy storage properties of Co-Ni LDH/carbon fiber. Moreover, the highly ordered Co-Ni LDH nanosheets advanced the contact between KOH electrolyte and the active materials on the electrode, thereby developing the capacitive performance of Co-Ni LDH/carbon fiber. The above results obviously demonstrate 3D Co-Ni LDH/carbon fiber serves as an encouraging electrode material for the application of high-performance supercapacitor.


  • Facile Preparation of Porous CaMgAl Hydrotalcite-Like Derived Mixed Oxides through Alkaline Etching of KOH for CO2 Capture

    by Kaiwen Bo, Yanyan Feng, Zhenfei Lan, Wen Yang, Yanjie Li

    Hydrotalcite-like compounds are effective adsorbents for adsorbing and separating CO2 from flue gas. However, this kind of adsorbents has the problems of poor dispersibility and low available specific surface area. In response to these problems, porous CaMgAl mixed oxides were obtained by KOH alkaline etching of CaMgAl hydrotalcite-like hydroxides prepared by one-pot hydrothermal method. The characterization results demonstrated that after alkaline etching, the Al species were partly removed and some mesopores were formed, along with the increase of the specific surface area. Correspondingly, the CO2 uptake of the alkaline-etched adsorbent was up to 380.7 mg/g, ascribed to the developed pore structure. The porous structure facilitated the exposure of alkaline adsorption active sites and made it easier to combine CO2 molecules with adsorption sites on the adsorbent surface. Besides, the alkaline-etched adsorbent had a good cyclic stability after 10 cycles with maintaining 78% of the initial CO2 uptake, which was potentially applied for CO2 capture.


  • Open Access

    Fabrication and electrochemical properties of hollow cage-like nickel cobalt layered hydroxides with porous structure

    by Wen Yang, Qian-Yao Ding, Dong-Mei Zhai, Kai-Wen Bo, Yan-Yan Feng, Jie Wen, Fang He

    超级电容器以功率密度高、寿命长、环境友好等优点在各种能量存储设备中受到广泛关注. 所以, 提高电极材料的储能性能对超级电容器的开发与应用具有重要的意义. 具有特定纳米结构的功能材料作为超级电容器电极材料时具有优异的电化学性能, 原因在于其能提供丰富的电化学活性位点、高的比表面积和增加电解质与材料的接触面积. 因此, 本文以ZIF-67纳米晶为模板, 利用硝酸盐刻蚀的方法制备中空笼状镍钴层状氢氧化物(NiCo-LDH), 并研究其作为超级电容器电极材料的储能性能. 借助X射线衍射、扫描电镜、透射电镜、低温氮气吸附/脱附和电化学测试等手段分析所得NiCo-LDH的结构、形貌和电化学性能. 结果表明: NiCo-LDH由纳米片组装形成中空笼状结构, 拥有丰富的介孔和大孔孔道以及较高的比表面积, 从而有助于增加电活性位点, 促使电解液与电极材料的充分接触, 进而显著提高材料的储能性能. 当刻蚀用镍、钴盐质量比为1∶1时, 样品Ni1Co1-LDH的比电容可达801 F·g–1(电流密度为0.5 A·g–1), 且在大电流密度下(10 A·g–1)仍能保持582 F·g–1的比电容; 在电流密度15 A·g–1的条件下经过2000次循环后, 其比电容值保持为初始值的100.2%, 表现出优异的储能性能和潜在的应用价值.