Hannes Alois Weiss
Research Subjects
Hannes Alois Weiss has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Wolfram Volk
Technische Universität München
4 shared publications Kay Hameyer
3 shared publications- Nora Leuning
RWTH Aachen University
2 shared publications - Simon Steentjes
Institut für Elektrische Maschinen (IEM), RWTH Aachen University, Aachen, Deutschland
2 shared publications - Alex Gustschin
Technical University of Munich
1 shared publication - Benedikt Schauerte
Institute of Electrical Machines (IEM), RWTH Aachen University, Schinkelstr. 4, D-52062 Aachen, Germany
1 shared publication
Latest Publications
- 29 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 01-06
Modified magnetic properties due to roller leveling of electrical steel
When processing stator and rotor cores from electrical steel strip material, different processing steps induce additional mechanical stress resulting in deteriorated magnetic properties. They can originate from heating process induced thermal strains or plastic deformation process induced mechanical strains. Due to its impact on magnetic material properties, such process-related deteriorations must be considered when developing an electrical machine. With regards to blanking, a high-volume production process, different manufacturing steps, i.e. punching, blanking, forming and interlocking, can induce plastic deformation. One process often neglected is roller leveling. This process sometimes is necessary to enable complex lamination geometries for rotor, stator or both to be cut from an electrical steel strip. Especially, for magnetic cores that get bigger in diameter and therefore stamping tools that increase in length, using roller leveling to produce flat parts becomes inevitable. Within the presented study electrical steels varying in its manufacturer, its batch and its thickness are roller leveled to different levels of plastic deformation. The increasing mechanical stress' impact on magnetic properties like specific iron loss is discussed regarding different frequencies and polarizations. Overall, the study proves that roller leveling is a process one might consider twice before using it to produce top-notch electrical machines.
- 29 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 01-06
Modified magnetic properties due to roller leveling of electrical steel
When processing stator and rotor cores from electrical steel strip material, different processing steps induce additional mechanical stress resulting in deteriorated magnetic properties. They can originate from heating process induced thermal strains or plastic deformation process induced mechanical strains. Due to its impact on magnetic material properties, such process-related deteriorations must be considered when developing an electrical machine. With regards to blanking, a high-volume production process, different manufacturing steps, i.e. punching, blanking, forming and interlocking, can induce plastic deformation. One process often neglected is roller leveling. This process sometimes is necessary to enable complex lamination geometries for rotor, stator or both to be cut from an electrical steel strip. Especially, for magnetic cores that get bigger in diameter and therefore stamping tools that increase in length, using roller leveling to produce flat parts becomes inevitable. Within the presented study electrical steels varying in its manufacturer, its batch and its thickness are roller leveled to different levels of plastic deformation. The increasing mechanical stress' impact on magnetic properties like specific iron loss is discussed regarding different frequencies and polarizations. Overall, the study proves that roller leveling is a process one might consider twice before using it to produce top-notch electrical machines.
- 1 January 2019
- Published by Elsevier in CIRP Annals
- Vol. 68 (1) , 253-256
Manufacturing efficient electrical motors with a predictive maintenance approach
- 1 January 2019
- Published by Elsevier in CIRP Annals
- Vol. 68 (1) , 253-256
Manufacturing efficient electrical motors with a predictive maintenance approach
- 12 December 2018
- Published by Springer Nature in Production Engineering
- Vol. 13 (2) , 211-217
Extent of embossing-related residual stress on the magnetic properties evaluated using neutron grating interferometry and single sheet test
- 12 December 2018
- Published by Springer Nature in Production Engineering
- Vol. 13 (2) , 211-217
Extent of embossing-related residual stress on the magnetic properties evaluated using neutron grating interferometry and single sheet test
- 5 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 54 (6) , 5869-5878
Impact of Punching Parameter Variations on Magnetic Properties of Nongrain-Oriented Electrical Steel
The efficiency and performance of an electrical machine depends on the magnetic properties of its magnetic core, i. e., the rotor and stator core made of stacked and processed electrical steel laminations. Especially mechanical cutting, also known as punching or blanking, deteriorates the magnetic material properties next to the cutting line due to induced residual stress. The extent of the deterioration depends on the amount of induced stress, which is affected by the mechanical material properties and the process parameters used during punching. For this reason, in this paper the effect of punching parameter variations on the magnetic properties of eight different non-grain oriented electrical steels is investigated by using a single sheet tester. The magnetic property deterioration is discussed based on the specific-loss and the maximum field strength increase. In addition, the impact of punching parameter variations on the efficiency and the local flux and loss distribution of a permanent magnet synchronous machine is shown based on a finite element analysis. This allows one to tailor the punching parameters towards energy-loss minimization.
- 5 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 54 (6) , 5869-5878
Impact of Punching Parameter Variations on Magnetic Properties of Nongrain-Oriented Electrical Steel
The efficiency and performance of an electrical machine depends on the magnetic properties of its magnetic core, i. e., the rotor and stator core made of stacked and processed electrical steel laminations. Especially mechanical cutting, also known as punching or blanking, deteriorates the magnetic material properties next to the cutting line due to induced residual stress. The extent of the deterioration depends on the amount of induced stress, which is affected by the mechanical material properties and the process parameters used during punching. For this reason, in this paper the effect of punching parameter variations on the magnetic properties of eight different non-grain oriented electrical steels is investigated by using a single sheet tester. The magnetic property deterioration is discussed based on the specific-loss and the maximum field strength increase. In addition, the impact of punching parameter variations on the efficiency and the local flux and loss distribution of a permanent magnet synchronous machine is shown based on a finite element analysis. This allows one to tailor the punching parameters towards energy-loss minimization.
- 3 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 54 (11) , 1-5
Magnetic Material Deterioration of Non-Oriented Electrical Steels as a Result of Plastic Deformation Considering Residual Stress Distribution
For the application in the magnetic core of an electrical machine, electrical steel is cut, packaged, and fixed. The processes induce plastic deformation as well as residual stress. As a result, the magnetic material properties are deteriorated. Most of the effects act local, e.g., in the vicinity of the cut edge or welding line. In order to model the change in local magnetic properties, the effect mechanisms of plastic and elastic stress have to be understood and quantified. In this paper, rectangular samples of a conventional non-oriented 2.4 wt% FeSi with 0.35 mm thickness are stressed uniaxially beyond the elastic limit and characterized during loading, after deformation, and during reloading. A homogeneous stress distribution across the cross section is targeted by the experimental setup to enable a correlation between the global magnetic properties and mechanical finite-element simulations of the stress. As a result, separate physical effects, e.g., dislocation formation, global stress distribution, and residual stress after dislocation formation, on magnetic property change are analyzed. This knowledge is essential to understand the complex effects of processing on the local magnetic properties of rotors and stators in electrical machines.
- 3 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 54 (11) , 1-5
Magnetic Material Deterioration of Non-Oriented Electrical Steels as a Result of Plastic Deformation Considering Residual Stress Distribution
For the application in the magnetic core of an electrical machine, electrical steel is cut, packaged, and fixed. The processes induce plastic deformation as well as residual stress. As a result, the magnetic material properties are deteriorated. Most of the effects act local, e.g., in the vicinity of the cut edge or welding line. In order to model the change in local magnetic properties, the effect mechanisms of plastic and elastic stress have to be understood and quantified. In this paper, rectangular samples of a conventional non-oriented 2.4 wt% FeSi with 0.35 mm thickness are stressed uniaxially beyond the elastic limit and characterized during loading, after deformation, and during reloading. A homogeneous stress distribution across the cross section is targeted by the experimental setup to enable a correlation between the global magnetic properties and mechanical finite-element simulations of the stress. As a result, separate physical effects, e.g., dislocation formation, global stress distribution, and residual stress after dislocation formation, on magnetic property change are analyzed. This knowledge is essential to understand the complex effects of processing on the local magnetic properties of rotors and stators in electrical machines.