Magnetic Material Deterioration of Non-Oriented Electrical Steels as a Result of Plastic Deformation Considering Residual Stress Distribution
- 3 July 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 54 (11) , 1-5
Abstract
For the application in the magnetic core of an electrical machine, electrical steel is cut, packaged, and fixed. The processes induce plastic deformation as well as residual stress. As a result, the magnetic material properties are deteriorated. Most of the effects act local, e.g., in the vicinity of the cut edge or welding line. In order to model the change in local magnetic properties, the effect mechanisms of plastic and elastic stress have to be understood and quantified. In this paper, rectangular samples of a conventional non-oriented 2.4 wt% FeSi with 0.35 mm thickness are stressed uniaxially beyond the elastic limit and characterized during loading, after deformation, and during reloading. A homogeneous stress distribution across the cross section is targeted by the experimental setup to enable a correlation between the global magnetic properties and mechanical finite-element simulations of the stress. As a result, separate physical effects, e.g., dislocation formation, global stress distribution, and residual stress after dislocation formation, on magnetic property change are analyzed. This knowledge is essential to understand the complex effects of processing on the local magnetic properties of rotors and stators in electrical machines.Keywords
This publication has 14 references indexed in Scilit:
- Effect of elastic and plastic tensile mechanical loading on the magnetic properties of NGO electrical steelJournal of Magnetism and Magnetic Materials, 2016
- Investigation of the influence of global stresses and strains on the magnetic properties of electrical steels with varying alloying content and grain size2015
- Laser Cutting and Mechanical Cutting of Electrical Steels and its Effect on the Magnetic PropertiesIEEE Transactions on Magnetics, 2014
- Importance of punching and workability in non-oriented electrical steel sheetsJournal of Magnetism and Magnetic Materials, 2008
- Magnetic behaviour versus tensile deformation mechanisms in a non-oriented Fe–(3 wt.%)Si steelMaterials Science and Engineering: A, 2003
- Magnetic characterisation of elastically and plastically tensile strained non-oriented Fe–3.2%Si steelJournal of Magnetism and Magnetic Materials, 2003
- Measuring setup for the investigation of the influence of mechanical stresses on magnetic properties of electrical steelJournal of Magnetism and Magnetic Materials, 2003
- The effect of plastic deformation and residual stress on the permeability and magnetostriction of steelsJournal of Magnetism and Magnetic Materials, 2000
- Aspects of the cut-edge effect stress on the power loss and flux density distribution in electrical steel sheetsJournal of Magnetism and Magnetic Materials, 2000
- The deformation of plastically non-homogeneous materialsPhilosophical Magazine, 1970