Albert Hamed-Harisovich Nugmanov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Albert Hamed-Harisovich Nugmanov has a total of 149 co-authors. Here are the top co-authors by number of shared publications:
- Igor Yurievich Aleksanyan
Astrakhan State Technical University
21 shared publications - Pavel Dmitrievich Osmolovskiy
Russian State Agrarian University - Moscow Timiryazev Agricultural Academy
13 shared publications И. Ю. Алексанян
Федеральное государственное бюджетное образовательное учреждение высшего образования «Астраханский государственный технический университет
9 shared publications- Zarema Mikhailovna Arabova
Vernadsky Institute of Geochemistry and Analytical Chemistry o f the Russian Academy of Sciences
7 shared publications Astrakhan State Technical University
6 shared publications- A. A. Odintsova
Russian State Agrarian University – Moscow Timiryazev Agricultural Academy (RSAU – MTAA)
5 shared publications
Latest Publications
- Open Access
- 13 October 2026
- Published by Maikop State Technological University in New Technologies
- Vol. 22 (3) , 28-39
Combined deodorization of dry protein products from secondary fish raw materials
Introduction. The fish processing industry annually produces a significant amount of secondary raw materials – caviar and roe complex, liver, and other organs of ordinary fish species. This raw material is a promising source for obtaining valuable food ingredients, including fractionated lecithin and isolated protein products. However, their widespread use is limited by the presence of a persistent fishy odor, which significantly reduces the organoleptic properties and consumer appeal of the final product. The goal of the research was to investigate the mechanisms of formation of volatile compounds responsible for the undesirable odor in dried catfish liver and raffinate after the extraction of lecithin-containing substances from fish roe, as well as to develop an effective and cost-effective deodorization method. The objects and methods of the research were dried catfish liver and raffinate after lecithin extraction. The paper provides a comparative analysis of physicochemical deodorization methods, including treatment with organic acids and natural antioxidants. Volatile compound concentrations were determined using gas chromatographymass spectrometry. The results and discussion. The research confirmed that the main sources of undesirable odors were three groups of volatile compounds: nitrogenous (trimethylamine, ammonia), carbonyl (hexanal, nonanal), and sulfur-containing (dimethyl sulfide, methyl mercaptan). A comparative analysis substantiated the effectiveness of combined treatment with organic acids and natural antioxidants. Experiments confirmed that a combination of 1% citric acid and 0.3% rosemary extract reduced trimethylamine content by 70%, hexanal by 45%, and improved organoleptic properties by 3 points. Conclusion. The proposed method is technologically feasible, does not require significant capital investment, and can be recommended for the implementation in the food industry. It opens up prospects for expanding the use of secondary protein products in the production of food ingredients with improved organoleptic properties.
- 13 October 2026
- Published by Maikop State Technological University in New Technologies
- Vol. 22 (3) , 28-39
Open AccessCombined deodorization of dry protein products from secondary fish raw materials
Introduction. The fish processing industry annually produces a significant amount of secondary raw materials – caviar and roe complex, liver, and other organs of ordinary fish species. This raw material is a promising source for obtaining valuable food ingredients, including fractionated lecithin and isolated protein products. However, their widespread use is limited by the presence of a persistent fishy odor, which significantly reduces the organoleptic properties and consumer appeal of the final product. The goal of the research was to investigate the mechanisms of formation of volatile compounds responsible for the undesirable odor in dried catfish liver and raffinate after the extraction of lecithin-containing substances from fish roe, as well as to develop an effective and cost-effective deodorization method. The objects and methods of the research were dried catfish liver and raffinate after lecithin extraction. The paper provides a comparative analysis of physicochemical deodorization methods, including treatment with organic acids and natural antioxidants. Volatile compound concentrations were determined using gas chromatographymass spectrometry. The results and discussion. The research confirmed that the main sources of undesirable odors were three groups of volatile compounds: nitrogenous (trimethylamine, ammonia), carbonyl (hexanal, nonanal), and sulfur-containing (dimethyl sulfide, methyl mercaptan). A comparative analysis substantiated the effectiveness of combined treatment with organic acids and natural antioxidants. Experiments confirmed that a combination of 1% citric acid and 0.3% rosemary extract reduced trimethylamine content by 70%, hexanal by 45%, and improved organoleptic properties by 3 points. Conclusion. The proposed method is technologically feasible, does not require significant capital investment, and can be recommended for the implementation in the food industry. It opens up prospects for expanding the use of secondary protein products in the production of food ingredients with improved organoleptic properties.
- Open Access
- 30 June 2026
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 88 (2) , 148-156
Experimental study of the dielectric properties of catfish liver as an object of microwave drying
Fish by-products are a potential source of valuable substances with important functional properties. Improving the value of fish by-products is currently essential for producing clean and waste-free products in the fish processing industry. Fish liver, as a secondary raw material, contains a complex of low-molecular compounds and enzymes, which serve as the basis for expensive and scarce biologically active premixes and highly purified substances. The liver of the common catfish was studied, with both raw and dried liver exposed to microwave radiation. Experimental studies to determine the permittivity and its imaginary part through the dissipation tangent for samples of the original raw liver with a moisture content of 68% and the final dried product with a moisture content of 5% were conducted using the resonator perturbation method at a frequency of 2.45 GHz in the temperature range from 60°C to 100°C. For the liver studied, permittivity and conductivity significantly depended on moisture content, microwave frequency, temperature, density, and thickness of the catfish liver layer, which varied during dehydration. Graphical patterns were obtained for the variation of permittivity and its imaginary part depending on the moisture content and temperature of the catfish liver. It was determined that with increasing moisture content of the by-product, at all temperatures, the permittivity also increases. Dielectric loss also increases with increasing moisture content across its entire range. Mathematical dependencies of the imaginary part of permittivity on moisture content were obtained in the range from 0.05 to 0.68 kg/kg, respectively, for temperatures ranging from 60°C to 100°C. Growing interest in processing fish raw materials using microwave technologies necessitates further research into the dielectric properties of various food products.
- 30 June 2026
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 88 (2) , 148-156
Open AccessExperimental study of the dielectric properties of catfish liver as an object of microwave drying
Fish by-products are a potential source of valuable substances with important functional properties. Improving the value of fish by-products is currently essential for producing clean and waste-free products in the fish processing industry. Fish liver, as a secondary raw material, contains a complex of low-molecular compounds and enzymes, which serve as the basis for expensive and scarce biologically active premixes and highly purified substances. The liver of the common catfish was studied, with both raw and dried liver exposed to microwave radiation. Experimental studies to determine the permittivity and its imaginary part through the dissipation tangent for samples of the original raw liver with a moisture content of 68% and the final dried product with a moisture content of 5% were conducted using the resonator perturbation method at a frequency of 2.45 GHz in the temperature range from 60°C to 100°C. For the liver studied, permittivity and conductivity significantly depended on moisture content, microwave frequency, temperature, density, and thickness of the catfish liver layer, which varied during dehydration. Graphical patterns were obtained for the variation of permittivity and its imaginary part depending on the moisture content and temperature of the catfish liver. It was determined that with increasing moisture content of the by-product, at all temperatures, the permittivity also increases. Dielectric loss also increases with increasing moisture content across its entire range. Mathematical dependencies of the imaginary part of permittivity on moisture content were obtained in the range from 0.05 to 0.68 kg/kg, respectively, for temperatures ranging from 60°C to 100°C. Growing interest in processing fish raw materials using microwave technologies necessitates further research into the dielectric properties of various food products.
- 16 March 2026
- Published by Ural State University of Economics in Food Industry
- Vol. 11 (1) , 38
Solution of a mathematical model for foamed fish hydrolysate convective-microwave drying
The main problem leading to economic and environmental costs is the inefficient processing of protein and mineral waste from aquaculture. The valuable fish hydrolysate obtained from this waste requires effective dehydration, but traditional methods such as spray drying do not provide high productivity. The key solution is to intensify the dehydration process by combining several technological approaches. Initially, the hydrolysate is structured by foaming it with the addition of a thickener and stabilizer (such as guar gum), which creates the necessary porous matrix for moisture removal. The most effective drying method for this material is a combined microwave technology, often used in conjunction with convective energy supply. Its advantage lies in its ability to provide rapid and controlled volumetric heating of the porous structure of the foamed hydrolysate, significantly accelerating and intensifying the entire dehydration process. The article experimentally established rational process parameters: a layer thickness of 5 mm, an initial material temperature of (27 ± 2) °C, and a specific microwave power of 5 kW/m². Under these conditions, a moisture reduction from 81% to 8% was achieved in 7.5 minutes. The kinetic patterns of convective-microwave drying of the hydrolysate were identified. The authors developed and verified an adapted mathematical model of heat and mass transfer that takes into account the dependence of the material’s dielectric and thermophysical properties on humidity. The model’s solution showed that, under the specified conditions, the temperature in the layer does not exceed 65 °C in the first 4 minutes, after which it rises uncontrollably, defining the critical transition point from microwave heating to convective drying. The effectiveness of a two-stage hybrid mode was experimentally confirmed: 4-minute microwave drying (to 43.5 % humidity and 66°C) followed by 8-minute convective drying at an agent temperature of 75 °C, which allows for a moisture content reduction to 6 % while maintaining the quality of the heat-sensitive product.
- 16 March 2026
- Published by Ural State University of Economics in Food Industry
- Vol. 11 (1) , 38
Solution of a mathematical model for foamed fish hydrolysate convective-microwave drying
The main problem leading to economic and environmental costs is the inefficient processing of protein and mineral waste from aquaculture. The valuable fish hydrolysate obtained from this waste requires effective dehydration, but traditional methods such as spray drying do not provide high productivity. The key solution is to intensify the dehydration process by combining several technological approaches. Initially, the hydrolysate is structured by foaming it with the addition of a thickener and stabilizer (such as guar gum), which creates the necessary porous matrix for moisture removal. The most effective drying method for this material is a combined microwave technology, often used in conjunction with convective energy supply. Its advantage lies in its ability to provide rapid and controlled volumetric heating of the porous structure of the foamed hydrolysate, significantly accelerating and intensifying the entire dehydration process. The article experimentally established rational process parameters: a layer thickness of 5 mm, an initial material temperature of (27 ± 2) °C, and a specific microwave power of 5 kW/m². Under these conditions, a moisture reduction from 81% to 8% was achieved in 7.5 minutes. The kinetic patterns of convective-microwave drying of the hydrolysate were identified. The authors developed and verified an adapted mathematical model of heat and mass transfer that takes into account the dependence of the material’s dielectric and thermophysical properties on humidity. The model’s solution showed that, under the specified conditions, the temperature in the layer does not exceed 65 °C in the first 4 minutes, after which it rises uncontrollably, defining the critical transition point from microwave heating to convective drying. The effectiveness of a two-stage hybrid mode was experimentally confirmed: 4-minute microwave drying (to 43.5 % humidity and 66°C) followed by 8-minute convective drying at an agent temperature of 75 °C, which allows for a moisture content reduction to 6 % while maintaining the quality of the heat-sensitive product.
- Open Access
- 27 February 2026
- Published by Krasnoyarsk State Agrarian University in Bulletin of KSAU
- No. 2,p. 199-214
THERMODYNAMIC ANALYSIS OF STATIC REGULARITIES OF LIQUID-SOLID-PHASE EXTRACTION OF THERMOLABILE COMPONENTS FROM PLANT RAW MATERIALS
The aim of the study is to conduct a thermodynamic analysis of the static patterns of the liquid-solid-phase extraction of heat-labile components using the example of obtaining extracts from Jerusalem artichoke and licorice root. Objectives: to experimentally identify the static patterns of the liquid-solid-phase extraction process of the study objects; to conduct a thermodynamic analysis of the static patterns of the liquid-solid-phase extraction process; to determine the extraction static parameters, such as the energy components of the Gibbs free energy; to evaluate the thermal effect of the liquid-solid-phase extraction process of the study objects. The objects of the study are Jerusalem artichoke, licorice root, and aqueous extracts of inulin and glycyrrhizic acid. In this study, this analysis is carried out based on the equations of thermodynamics. The results of calculating the distribution constants of the target components between the extractant and the solid phase are presented, and the extraction static parameters, such as the energy components of the Gibbs free energy, are determined. Taking into account the total heat expended during component transfer from phase to phase, the heat balance equation, for example, determines the temperature change during extraction, taking into account the heat capacity of the extract. It should be noted that the thermal effect can increase with changes in the extract's hydromodulus and concentration, as well as the type of extractant, the nature of the raw material, and the component being transferred. The obtained results allow us to take into account the exothermic or endothermic effect for each type of raw material and transferred component during the extraction process, while maintaining temperature constraints. They can also be used to determine the energy intensity of the extraction process and model the operation. Energy during extraction is spent not only on the dissolution of the extracted component itself but also on overcoming its structural (entropic) or adsorption bond with the raw material or raffinate. This can be achieved through physical effects, in particular, additional energy from heating the hydromodule or extractant or through ultrasonic cavitation.
- 27 February 2026
- Published by Krasnoyarsk State Agrarian University in Bulletin of KSAU
- No. 2,p. 199-214
Open AccessTHERMODYNAMIC ANALYSIS OF STATIC REGULARITIES OF LIQUID-SOLID-PHASE EXTRACTION OF THERMOLABILE COMPONENTS FROM PLANT RAW MATERIALS
The aim of the study is to conduct a thermodynamic analysis of the static patterns of the liquid-solid-phase extraction of heat-labile components using the example of obtaining extracts from Jerusalem artichoke and licorice root. Objectives: to experimentally identify the static patterns of the liquid-solid-phase extraction process of the study objects; to conduct a thermodynamic analysis of the static patterns of the liquid-solid-phase extraction process; to determine the extraction static parameters, such as the energy components of the Gibbs free energy; to evaluate the thermal effect of the liquid-solid-phase extraction process of the study objects. The objects of the study are Jerusalem artichoke, licorice root, and aqueous extracts of inulin and glycyrrhizic acid. In this study, this analysis is carried out based on the equations of thermodynamics. The results of calculating the distribution constants of the target components between the extractant and the solid phase are presented, and the extraction static parameters, such as the energy components of the Gibbs free energy, are determined. Taking into account the total heat expended during component transfer from phase to phase, the heat balance equation, for example, determines the temperature change during extraction, taking into account the heat capacity of the extract. It should be noted that the thermal effect can increase with changes in the extract's hydromodulus and concentration, as well as the type of extractant, the nature of the raw material, and the component being transferred. The obtained results allow us to take into account the exothermic or endothermic effect for each type of raw material and transferred component during the extraction process, while maintaining temperature constraints. They can also be used to determine the energy intensity of the extraction process and model the operation. Energy during extraction is spent not only on the dissolution of the extracted component itself but also on overcoming its structural (entropic) or adsorption bond with the raw material or raffinate. This can be achieved through physical effects, in particular, additional energy from heating the hydromodule or extractant or through ultrasonic cavitation.
- 1 January 2026
- Published by North Caucasus Federal University in Sovremennaya nauka i innovatsii
- No. 1,p. 137-144
Investigation of physico-chemical and technological parameters of inulin-containing concentrate from chicory root crops of the «Yaroslavsky-1» root variety
The modern food industry is focused on the production of functional products, among which prebiotics occupy a special place. A key and promising prebiotic is inulin, which not only stimulates the growth of beneficial intestinal microflora, but also has valuable technological properties. The main source for its industrial production is chicory root. In this regard, an urgent task is to assess the quality of inulin concentrate obtained from new varieties, such as the domestic variety Yaroslavsky-1. The purpose of this study was to evaluate the physico-chemical, technological and functional properties of inulin concentrate extracted from chicory roots of the Yaroslavsky-1 variety. The results of the study showed that the resulting concentrate is characterized by a high inulin content (78.2 g/100 g of solids). The content of monosaccharides, in particular glucose and fructose, was relatively low at the level of 4.8 and 6.2%, respectively, which indicates a slight hydrolysis of the polysaccharide. The inulin concentrate had a slightly acidic reaction of the medium (pH=5.8) and a moderate viscosity (2.8 MPa·s), which is favorable for its technological application. Biological tests confirmed the pronounced prebiotic properties, as the extract stimulated the growth and development of Bifidobacterium bifidum and Bifidobacterium longum Bifidobacteria and increased their resistance to acid stress and bile acids. In addition, significant antioxidant activity was found (IC50 in the DPPH test was 0.45 mg/ml). Thus, inulin concentrate from chicory of the Yaroslavsky-1 root variety has high quality and a complex of functional properties, which makes it a valuable ingredient for creating fortified foods with desired properties and antioxidant characteristics.
- 1 January 2026
- Published by North Caucasus Federal University in Sovremennaya nauka i innovatsii
- No. 1,p. 137-144
Investigation of physico-chemical and technological parameters of inulin-containing concentrate from chicory root crops of the «Yaroslavsky-1» root variety
The modern food industry is focused on the production of functional products, among which prebiotics occupy a special place. A key and promising prebiotic is inulin, which not only stimulates the growth of beneficial intestinal microflora, but also has valuable technological properties. The main source for its industrial production is chicory root. In this regard, an urgent task is to assess the quality of inulin concentrate obtained from new varieties, such as the domestic variety Yaroslavsky-1. The purpose of this study was to evaluate the physico-chemical, technological and functional properties of inulin concentrate extracted from chicory roots of the Yaroslavsky-1 variety. The results of the study showed that the resulting concentrate is characterized by a high inulin content (78.2 g/100 g of solids). The content of monosaccharides, in particular glucose and fructose, was relatively low at the level of 4.8 and 6.2%, respectively, which indicates a slight hydrolysis of the polysaccharide. The inulin concentrate had a slightly acidic reaction of the medium (pH=5.8) and a moderate viscosity (2.8 MPa·s), which is favorable for its technological application. Biological tests confirmed the pronounced prebiotic properties, as the extract stimulated the growth and development of Bifidobacterium bifidum and Bifidobacterium longum Bifidobacteria and increased their resistance to acid stress and bile acids. In addition, significant antioxidant activity was found (IC50 in the DPPH test was 0.45 mg/ml). Thus, inulin concentrate from chicory of the Yaroslavsky-1 root variety has high quality and a complex of functional properties, which makes it a valuable ingredient for creating fortified foods with desired properties and antioxidant characteristics.
- Open Access
- 17 December 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (3) , 191-197
Study of the effect of the regime parameters of mechanical foaming of keratin hydrolysate with a thickener in foam concrete technology
The modern concept of building new-generation residential buildings, focused on energy efficiency, environmental safety, economic feasibility and flexibility of planning solutions, creates a steady demand for lightweight, durable and durable thermal insulation materials. In this context, foam concrete is of considerable interest, and its key component is highly effective foaming agents. The development of protein foaming agents based on hydrolysates of keratin–containing raw materials, in particular, poultry processing waste - peropukhovy raw materials, which makes it possible to solve the problem of recycling secondary resources, is recognized as a promising direction. The aim of the study was to develop a resource-saving technology for producing a dry foaming agent based on keratin hydrolysate. As an alternative to the energy-intensive vacuum–radiation drying process and the expensive pre–concentration stage, it is proposed to use the introduction of a thickener, guar gum, followed by convective drying. The authors scientifically substantiated and experimentally confirmed the choice of guar gum as a rational rheological modifier. It has been found that it forms a stable structural framework that effectively prevents the drainage and coalescence of bubbles, and demonstrates synergy with protein components, providing high kinetic stability of the foam. The article presents the results of determining the rational parameters of the foaming process: the whisk rotation speed is 1600 rpm and the duration is 180 seconds, which ensures the maximum multiplicity and stability of the foam structure. It was found that the introduction of guar gum at a concentration of 0.35...0.40% makes it possible to obtain a foam with high stability (half-life of 35...40 minutes) and optimal structural and mechanical properties suitable for effective removal and subsequent convective drying. The comparison with known analogues confirms the adequacy and competitiveness of the results obtained, which makes it possible to recommend this technology for implementation in production practice.
- 17 December 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (3) , 191-197
Open AccessStudy of the effect of the regime parameters of mechanical foaming of keratin hydrolysate with a thickener in foam concrete technology
The modern concept of building new-generation residential buildings, focused on energy efficiency, environmental safety, economic feasibility and flexibility of planning solutions, creates a steady demand for lightweight, durable and durable thermal insulation materials. In this context, foam concrete is of considerable interest, and its key component is highly effective foaming agents. The development of protein foaming agents based on hydrolysates of keratin–containing raw materials, in particular, poultry processing waste - peropukhovy raw materials, which makes it possible to solve the problem of recycling secondary resources, is recognized as a promising direction. The aim of the study was to develop a resource-saving technology for producing a dry foaming agent based on keratin hydrolysate. As an alternative to the energy-intensive vacuum–radiation drying process and the expensive pre–concentration stage, it is proposed to use the introduction of a thickener, guar gum, followed by convective drying. The authors scientifically substantiated and experimentally confirmed the choice of guar gum as a rational rheological modifier. It has been found that it forms a stable structural framework that effectively prevents the drainage and coalescence of bubbles, and demonstrates synergy with protein components, providing high kinetic stability of the foam. The article presents the results of determining the rational parameters of the foaming process: the whisk rotation speed is 1600 rpm and the duration is 180 seconds, which ensures the maximum multiplicity and stability of the foam structure. It was found that the introduction of guar gum at a concentration of 0.35...0.40% makes it possible to obtain a foam with high stability (half-life of 35...40 minutes) and optimal structural and mechanical properties suitable for effective removal and subsequent convective drying. The comparison with known analogues confirms the adequacy and competitiveness of the results obtained, which makes it possible to recommend this technology for implementation in production practice.
- Open Access
- 17 December 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (3) , 170-176
A promising technology for obtaining dietary fiber from chicory root
This paper presents the results of research into the development of a technology for producing dietary fiber from raffinate formed during the extraction of target components from raw materials of root origin. The study utilized the domestic Yaroslavsky 1 variety, characterized by a high inulin content of up to 18.0%. Inulin was extracted from the root vegetables after grinding them on a grating surface with teardrop-shaped holes using water extraction at a water ratio of 1:3 and a temperature of 90 °C. The raffinate obtained after diffusion was separated, returning the diffuse juice to the process, and the solid residue was microwave-dried. Optimal microwave drying parameters were established: a radiation power of 540 W and a duration of 32 minutes. The residual moisture content of the dried product approaches 10%, which ensures its long-term shelf life. The finished product, after grinding in a knife mill, was a homogeneous powder with a particle size of 0.3 to 0.5 mm, light brown in color, and had a slightly bitter taste due to residual intibin. The aroma was mild, characteristic of the original raw material. The average fiber content in the finished product was 77.6, or 87.2% of the total dry matter content. Protein (3.6%) and trace amounts of fat were also detected. The proposed product can be used as an additive in the production of various food products (meat, dairy, bakery, confectionery, etc.) to enrich them with fiber, or sold as a prebiotic dietary supplement "Plant Fiber."
- 17 December 2025
- Published by FSBEI HE Voronezh State University of Engineering Technologies in Proceedings of the Voronezh State University of Engineering Technologies
- Vol. 87 (3) , 170-176
Open AccessA promising technology for obtaining dietary fiber from chicory root
This paper presents the results of research into the development of a technology for producing dietary fiber from raffinate formed during the extraction of target components from raw materials of root origin. The study utilized the domestic Yaroslavsky 1 variety, characterized by a high inulin content of up to 18.0%. Inulin was extracted from the root vegetables after grinding them on a grating surface with teardrop-shaped holes using water extraction at a water ratio of 1:3 and a temperature of 90 °C. The raffinate obtained after diffusion was separated, returning the diffuse juice to the process, and the solid residue was microwave-dried. Optimal microwave drying parameters were established: a radiation power of 540 W and a duration of 32 minutes. The residual moisture content of the dried product approaches 10%, which ensures its long-term shelf life. The finished product, after grinding in a knife mill, was a homogeneous powder with a particle size of 0.3 to 0.5 mm, light brown in color, and had a slightly bitter taste due to residual intibin. The aroma was mild, characteristic of the original raw material. The average fiber content in the finished product was 77.6, or 87.2% of the total dry matter content. Protein (3.6%) and trace amounts of fat were also detected. The proposed product can be used as an additive in the production of various food products (meat, dairy, bakery, confectionery, etc.) to enrich them with fiber, or sold as a prebiotic dietary supplement "Plant Fiber."
- Open Access
- 8 October 2025
- Published by Kemerovo State University in Food Processing: Techniques and Technology
- p. 454-467
Combined Energy Supply Drying of Fish Eggs and Lecithin Clot Based on Dehydration Kinetics: Mathematical Model Adaptation
Removing moisture from biological materials has many advantages since reduced volume means lower processing costs, and drying prevents microbial growth and spoilage. Despite the fact that different drying methods pursue the same goal, they differ conceptually and require modification/adaptation, depending on the biomaterial. The article describes the kinetics and optimal dehydration modes that increase the drying efficiency of quasi-liquid products (roe and skein complex) using physical and mathematical modeling of heat and mass transfer and moisture removal. The existing mathematical model for drying with combined energy supply was adapted to fish eggs and lecithin clot. The dehydration kinetics made it possible to understand the temperature distribution inside the dried biomaterial and estimate the drying time. A gas mix served as a drying agent. The calculations were compared with the experimental drying tests for similar biomaterials. The materials were subjected to dehydration in the mode of conductive-convective heat supply in an original laboratory drying unit. The authors identified the kinetic patterns and rational mode parameters to increase the performance. The rational operating parameters included the intensity of the coolant movement (3.50 m/s); the height of the dried layer (0.01 m); the surface temperature of the dried material and the temperature of the heating plate (313 K); the initial temperature (283 K); the final moisture content (0.10 kg/kg). Under these parameters, the specific productivity was 7.610 kg/(m2·h), and the drying time to 0.1 kg/kg humidity was 150 min. The rational operating parameters of the lecithin clot included the coolant feeding rate (2.50 m/s); the layer height (0.003 m); the surface temperature of the dried material and the temperature of the heating plate (343 K); the initial temperature (328 K); the final humidity (0.130 kg/kg). In this case, the specific productivity was 13.630 kg/(m2·h), and the drying time to 0.130 kg/kg humidity was 40 min. Heat and mass transfer modeling increases the accuracy of calculation, making it possible to realize the energy saving potential without preliminary experiments while maintaining the quality of the dried product. In this research, the kinetic patterns, optimal dehydration modes, and drying models can be applied to heat and mass transfer processes under different production conditions, as well as to design new drying units for fish eggs and lecithin curd.
- 8 October 2025
- Published by Kemerovo State University in Food Processing: Techniques and Technology
- p. 454-467
Open AccessCombined Energy Supply Drying of Fish Eggs and Lecithin Clot Based on Dehydration Kinetics: Mathematical Model Adaptation
Removing moisture from biological materials has many advantages since reduced volume means lower processing costs, and drying prevents microbial growth and spoilage. Despite the fact that different drying methods pursue the same goal, they differ conceptually and require modification/adaptation, depending on the biomaterial. The article describes the kinetics and optimal dehydration modes that increase the drying efficiency of quasi-liquid products (roe and skein complex) using physical and mathematical modeling of heat and mass transfer and moisture removal. The existing mathematical model for drying with combined energy supply was adapted to fish eggs and lecithin clot. The dehydration kinetics made it possible to understand the temperature distribution inside the dried biomaterial and estimate the drying time. A gas mix served as a drying agent. The calculations were compared with the experimental drying tests for similar biomaterials. The materials were subjected to dehydration in the mode of conductive-convective heat supply in an original laboratory drying unit. The authors identified the kinetic patterns and rational mode parameters to increase the performance. The rational operating parameters included the intensity of the coolant movement (3.50 m/s); the height of the dried layer (0.01 m); the surface temperature of the dried material and the temperature of the heating plate (313 K); the initial temperature (283 K); the final moisture content (0.10 kg/kg). Under these parameters, the specific productivity was 7.610 kg/(m2·h), and the drying time to 0.1 kg/kg humidity was 150 min. The rational operating parameters of the lecithin clot included the coolant feeding rate (2.50 m/s); the layer height (0.003 m); the surface temperature of the dried material and the temperature of the heating plate (343 K); the initial temperature (328 K); the final humidity (0.130 kg/kg). In this case, the specific productivity was 13.630 kg/(m2·h), and the drying time to 0.130 kg/kg humidity was 40 min. Heat and mass transfer modeling increases the accuracy of calculation, making it possible to realize the energy saving potential without preliminary experiments while maintaining the quality of the dried product. In this research, the kinetic patterns, optimal dehydration modes, and drying models can be applied to heat and mass transfer processes under different production conditions, as well as to design new drying units for fish eggs and lecithin curd.
- 1 October 2025
- Published by Springer Nature
- p. 15-38
Integrating Digital Simulation and Sustainable Practices in Persimmon Extraction Processes
- 1 October 2025
- Published by Springer Nature
- p. 15-38
Integrating Digital Simulation and Sustainable Practices in Persimmon Extraction Processes
- 20 August 2025
- Published by Springer Nature
- p. 30-42
Digital Testing Twin of Algae Raw Material Drying Technology Based on Its Mathematical Model
- 20 August 2025
- Published by Springer Nature
- p. 30-42
Digital Testing Twin of Algae Raw Material Drying Technology Based on Its Mathematical Model